L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
-F: drivers/net/bfin_mac.*
+F: drivers/net/ethernet/adi/
BLACKFIN RTC DRIVER
M: Mike Frysinger <vapier.adi@gmail.com>
This driver supporting CPUs are:
- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
-config BFIN_MAC
- tristate "Blackfin on-chip MAC support"
- depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
- select CRC32
- select MII
- select PHYLIB
- select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
- help
- This is the driver for Blackfin on-chip mac device. Say Y if you want it
- compiled into the kernel. This driver is also available as a module
- ( = code which can be inserted in and removed from the running kernel
- whenever you want). The module will be called bfin_mac.
-
-config BFIN_MAC_USE_L1
- bool "Use L1 memory for rx/tx packets"
- depends on BFIN_MAC && (BF527 || BF537)
- default y
- help
- To get maximum network performance, you should use L1 memory as rx/tx buffers.
- Say N here if you want to reserve L1 memory for other uses.
-
-config BFIN_TX_DESC_NUM
- int "Number of transmit buffer packets"
- depends on BFIN_MAC
- range 6 10 if BFIN_MAC_USE_L1
- range 10 100
- default "10"
- help
- Set the number of buffer packets used in driver.
-
-config BFIN_RX_DESC_NUM
- int "Number of receive buffer packets"
- depends on BFIN_MAC
- range 20 100 if BFIN_MAC_USE_L1
- range 20 800
- default "20"
- help
- Set the number of buffer packets used in driver.
-
-config BFIN_MAC_USE_HWSTAMP
- bool "Use IEEE 1588 hwstamp"
- depends on BFIN_MAC && BF518
- default y
- help
- To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-
config NET_NETX
tristate "NetX Ethernet support"
select MII
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
+++ /dev/null
-/*
- * Blackfin On-Chip MAC Driver
- *
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define DRV_VERSION "1.1"
-#define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/skbuff.h>
-#include <linux/platform_device.h>
-
-#include <asm/dma.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/div64.h>
-#include <asm/dpmc.h>
-#include <asm/blackfin.h>
-#include <asm/cacheflush.h>
-#include <asm/portmux.h>
-#include <mach/pll.h>
-
-#include "bfin_mac.h"
-
-MODULE_AUTHOR("Bryan Wu, Luke Yang");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_ALIAS("platform:bfin_mac");
-
-#if defined(CONFIG_BFIN_MAC_USE_L1)
-# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num)
-# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr)
-#else
-# define bfin_mac_alloc(dma_handle, size, num) \
- dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL)
-# define bfin_mac_free(dma_handle, ptr, num) \
- dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle)
-#endif
-
-#define PKT_BUF_SZ 1580
-
-#define MAX_TIMEOUT_CNT 500
-
-/* pointers to maintain transmit list */
-static struct net_dma_desc_tx *tx_list_head;
-static struct net_dma_desc_tx *tx_list_tail;
-static struct net_dma_desc_rx *rx_list_head;
-static struct net_dma_desc_rx *rx_list_tail;
-static struct net_dma_desc_rx *current_rx_ptr;
-static struct net_dma_desc_tx *current_tx_ptr;
-static struct net_dma_desc_tx *tx_desc;
-static struct net_dma_desc_rx *rx_desc;
-
-static void desc_list_free(void)
-{
- struct net_dma_desc_rx *r;
- struct net_dma_desc_tx *t;
- int i;
-#if !defined(CONFIG_BFIN_MAC_USE_L1)
- dma_addr_t dma_handle = 0;
-#endif
-
- if (tx_desc) {
- t = tx_list_head;
- for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
- if (t) {
- if (t->skb) {
- dev_kfree_skb(t->skb);
- t->skb = NULL;
- }
- t = t->next;
- }
- }
- bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM);
- }
-
- if (rx_desc) {
- r = rx_list_head;
- for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
- if (r) {
- if (r->skb) {
- dev_kfree_skb(r->skb);
- r->skb = NULL;
- }
- r = r->next;
- }
- }
- bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM);
- }
-}
-
-static int desc_list_init(void)
-{
- int i;
- struct sk_buff *new_skb;
-#if !defined(CONFIG_BFIN_MAC_USE_L1)
- /*
- * This dma_handle is useless in Blackfin dma_alloc_coherent().
- * The real dma handler is the return value of dma_alloc_coherent().
- */
- dma_addr_t dma_handle;
-#endif
-
- tx_desc = bfin_mac_alloc(&dma_handle,
- sizeof(struct net_dma_desc_tx),
- CONFIG_BFIN_TX_DESC_NUM);
- if (tx_desc == NULL)
- goto init_error;
-
- rx_desc = bfin_mac_alloc(&dma_handle,
- sizeof(struct net_dma_desc_rx),
- CONFIG_BFIN_RX_DESC_NUM);
- if (rx_desc == NULL)
- goto init_error;
-
- /* init tx_list */
- tx_list_head = tx_list_tail = tx_desc;
-
- for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
- struct net_dma_desc_tx *t = tx_desc + i;
- struct dma_descriptor *a = &(t->desc_a);
- struct dma_descriptor *b = &(t->desc_b);
-
- /*
- * disable DMA
- * read from memory WNR = 0
- * wordsize is 32 bits
- * 6 half words is desc size
- * large desc flow
- */
- a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
- a->start_addr = (unsigned long)t->packet;
- a->x_count = 0;
- a->next_dma_desc = b;
-
- /*
- * enabled DMA
- * write to memory WNR = 1
- * wordsize is 32 bits
- * disable interrupt
- * 6 half words is desc size
- * large desc flow
- */
- b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
- b->start_addr = (unsigned long)(&(t->status));
- b->x_count = 0;
-
- t->skb = NULL;
- tx_list_tail->desc_b.next_dma_desc = a;
- tx_list_tail->next = t;
- tx_list_tail = t;
- }
- tx_list_tail->next = tx_list_head; /* tx_list is a circle */
- tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a);
- current_tx_ptr = tx_list_head;
-
- /* init rx_list */
- rx_list_head = rx_list_tail = rx_desc;
-
- for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
- struct net_dma_desc_rx *r = rx_desc + i;
- struct dma_descriptor *a = &(r->desc_a);
- struct dma_descriptor *b = &(r->desc_b);
-
- /* allocate a new skb for next time receive */
- new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
- if (!new_skb) {
- pr_notice("init: low on mem - packet dropped\n");
- goto init_error;
- }
- skb_reserve(new_skb, NET_IP_ALIGN);
- /* Invidate the data cache of skb->data range when it is write back
- * cache. It will prevent overwritting the new data from DMA
- */
- blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
- (unsigned long)new_skb->end);
- r->skb = new_skb;
-
- /*
- * enabled DMA
- * write to memory WNR = 1
- * wordsize is 32 bits
- * disable interrupt
- * 6 half words is desc size
- * large desc flow
- */
- a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
- /* since RXDWA is enabled */
- a->start_addr = (unsigned long)new_skb->data - 2;
- a->x_count = 0;
- a->next_dma_desc = b;
-
- /*
- * enabled DMA
- * write to memory WNR = 1
- * wordsize is 32 bits
- * enable interrupt
- * 6 half words is desc size
- * large desc flow
- */
- b->config = DMAEN | WNR | WDSIZE_32 | DI_EN |
- NDSIZE_6 | DMAFLOW_LARGE;
- b->start_addr = (unsigned long)(&(r->status));
- b->x_count = 0;
-
- rx_list_tail->desc_b.next_dma_desc = a;
- rx_list_tail->next = r;
- rx_list_tail = r;
- }
- rx_list_tail->next = rx_list_head; /* rx_list is a circle */
- rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a);
- current_rx_ptr = rx_list_head;
-
- return 0;
-
-init_error:
- desc_list_free();
- pr_err("kmalloc failed\n");
- return -ENOMEM;
-}
-
-
-/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
-
-/*
- * MII operations
- */
-/* Wait until the previous MDC/MDIO transaction has completed */
-static int bfin_mdio_poll(void)
-{
- int timeout_cnt = MAX_TIMEOUT_CNT;
-
- /* poll the STABUSY bit */
- while ((bfin_read_EMAC_STAADD()) & STABUSY) {
- udelay(1);
- if (timeout_cnt-- < 0) {
- pr_err("wait MDC/MDIO transaction to complete timeout\n");
- return -ETIMEDOUT;
- }
- }
-
- return 0;
-}
-
-/* Read an off-chip register in a PHY through the MDC/MDIO port */
-static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-{
- int ret;
-
- ret = bfin_mdio_poll();
- if (ret)
- return ret;
-
- /* read mode */
- bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
- SET_REGAD((u16) regnum) |
- STABUSY);
-
- ret = bfin_mdio_poll();
- if (ret)
- return ret;
-
- return (int) bfin_read_EMAC_STADAT();
-}
-
-/* Write an off-chip register in a PHY through the MDC/MDIO port */
-static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
- u16 value)
-{
- int ret;
-
- ret = bfin_mdio_poll();
- if (ret)
- return ret;
-
- bfin_write_EMAC_STADAT((u32) value);
-
- /* write mode */
- bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
- SET_REGAD((u16) regnum) |
- STAOP |
- STABUSY);
-
- return bfin_mdio_poll();
-}
-
-static int bfin_mdiobus_reset(struct mii_bus *bus)
-{
- return 0;
-}
-
-static void bfin_mac_adjust_link(struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- struct phy_device *phydev = lp->phydev;
- unsigned long flags;
- int new_state = 0;
-
- spin_lock_irqsave(&lp->lock, flags);
- if (phydev->link) {
- /* Now we make sure that we can be in full duplex mode.
- * If not, we operate in half-duplex mode. */
- if (phydev->duplex != lp->old_duplex) {
- u32 opmode = bfin_read_EMAC_OPMODE();
- new_state = 1;
-
- if (phydev->duplex)
- opmode |= FDMODE;
- else
- opmode &= ~(FDMODE);
-
- bfin_write_EMAC_OPMODE(opmode);
- lp->old_duplex = phydev->duplex;
- }
-
- if (phydev->speed != lp->old_speed) {
- if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
- u32 opmode = bfin_read_EMAC_OPMODE();
- switch (phydev->speed) {
- case 10:
- opmode |= RMII_10;
- break;
- case 100:
- opmode &= ~RMII_10;
- break;
- default:
- netdev_warn(dev,
- "Ack! Speed (%d) is not 10/100!\n",
- phydev->speed);
- break;
- }
- bfin_write_EMAC_OPMODE(opmode);
- }
-
- new_state = 1;
- lp->old_speed = phydev->speed;
- }
-
- if (!lp->old_link) {
- new_state = 1;
- lp->old_link = 1;
- }
- } else if (lp->old_link) {
- new_state = 1;
- lp->old_link = 0;
- lp->old_speed = 0;
- lp->old_duplex = -1;
- }
-
- if (new_state) {
- u32 opmode = bfin_read_EMAC_OPMODE();
- phy_print_status(phydev);
- pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
- }
-
- spin_unlock_irqrestore(&lp->lock, flags);
-}
-
-/* MDC = 2.5 MHz */
-#define MDC_CLK 2500000
-
-static int mii_probe(struct net_device *dev, int phy_mode)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- struct phy_device *phydev = NULL;
- unsigned short sysctl;
- int i;
- u32 sclk, mdc_div;
-
- /* Enable PHY output early */
- if (!(bfin_read_VR_CTL() & CLKBUFOE))
- bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
-
- sclk = get_sclk();
- mdc_div = ((sclk / MDC_CLK) / 2) - 1;
-
- sysctl = bfin_read_EMAC_SYSCTL();
- sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
- bfin_write_EMAC_SYSCTL(sysctl);
-
- /* search for connected PHY device */
- for (i = 0; i < PHY_MAX_ADDR; ++i) {
- struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
-
- if (!tmp_phydev)
- continue; /* no PHY here... */
-
- phydev = tmp_phydev;
- break; /* found it */
- }
-
- /* now we are supposed to have a proper phydev, to attach to... */
- if (!phydev) {
- netdev_err(dev, "no phy device found\n");
- return -ENODEV;
- }
-
- if (phy_mode != PHY_INTERFACE_MODE_RMII &&
- phy_mode != PHY_INTERFACE_MODE_MII) {
- netdev_err(dev, "invalid phy interface mode\n");
- return -EINVAL;
- }
-
- phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
- 0, phy_mode);
-
- if (IS_ERR(phydev)) {
- netdev_err(dev, "could not attach PHY\n");
- return PTR_ERR(phydev);
- }
-
- /* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_Autoneg
- | SUPPORTED_Pause | SUPPORTED_Asym_Pause
- | SUPPORTED_MII
- | SUPPORTED_TP);
-
- phydev->advertising = phydev->supported;
-
- lp->old_link = 0;
- lp->old_speed = 0;
- lp->old_duplex = -1;
- lp->phydev = phydev;
-
- pr_info("attached PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
- phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
- MDC_CLK, mdc_div, sclk/1000000);
-
- return 0;
-}
-
-/*
- * Ethtool support
- */
-
-/*
- * interrupt routine for magic packet wakeup
- */
-static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static int
-bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
-
- if (lp->phydev)
- return phy_ethtool_gset(lp->phydev, cmd);
-
- return -EINVAL;
-}
-
-static int
-bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (lp->phydev)
- return phy_ethtool_sset(lp->phydev, cmd);
-
- return -EINVAL;
-}
-
-static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, KBUILD_MODNAME);
- strcpy(info->version, DRV_VERSION);
- strcpy(info->fw_version, "N/A");
- strcpy(info->bus_info, dev_name(&dev->dev));
-}
-
-static void bfin_mac_ethtool_getwol(struct net_device *dev,
- struct ethtool_wolinfo *wolinfo)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
-
- wolinfo->supported = WAKE_MAGIC;
- wolinfo->wolopts = lp->wol;
-}
-
-static int bfin_mac_ethtool_setwol(struct net_device *dev,
- struct ethtool_wolinfo *wolinfo)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- int rc;
-
- if (wolinfo->wolopts & (WAKE_MAGICSECURE |
- WAKE_UCAST |
- WAKE_MCAST |
- WAKE_BCAST |
- WAKE_ARP))
- return -EOPNOTSUPP;
-
- lp->wol = wolinfo->wolopts;
-
- if (lp->wol && !lp->irq_wake_requested) {
- /* register wake irq handler */
- rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt,
- IRQF_DISABLED, "EMAC_WAKE", dev);
- if (rc)
- return rc;
- lp->irq_wake_requested = true;
- }
-
- if (!lp->wol && lp->irq_wake_requested) {
- free_irq(IRQ_MAC_WAKEDET, dev);
- lp->irq_wake_requested = false;
- }
-
- /* Make sure the PHY driver doesn't suspend */
- device_init_wakeup(&dev->dev, lp->wol);
-
- return 0;
-}
-
-static const struct ethtool_ops bfin_mac_ethtool_ops = {
- .get_settings = bfin_mac_ethtool_getsettings,
- .set_settings = bfin_mac_ethtool_setsettings,
- .get_link = ethtool_op_get_link,
- .get_drvinfo = bfin_mac_ethtool_getdrvinfo,
- .get_wol = bfin_mac_ethtool_getwol,
- .set_wol = bfin_mac_ethtool_setwol,
-};
-
-/**************************************************************************/
-static void setup_system_regs(struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- int i;
- unsigned short sysctl;
-
- /*
- * Odd word alignment for Receive Frame DMA word
- * Configure checksum support and rcve frame word alignment
- */
- sysctl = bfin_read_EMAC_SYSCTL();
- /*
- * check if interrupt is requested for any PHY,
- * enable PHY interrupt only if needed
- */
- for (i = 0; i < PHY_MAX_ADDR; ++i)
- if (lp->mii_bus->irq[i] != PHY_POLL)
- break;
- if (i < PHY_MAX_ADDR)
- sysctl |= PHYIE;
- sysctl |= RXDWA;
-#if defined(BFIN_MAC_CSUM_OFFLOAD)
- sysctl |= RXCKS;
-#else
- sysctl &= ~RXCKS;
-#endif
- bfin_write_EMAC_SYSCTL(sysctl);
-
- bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
-
- /* Set vlan regs to let 1522 bytes long packets pass through */
- bfin_write_EMAC_VLAN1(lp->vlan1_mask);
- bfin_write_EMAC_VLAN2(lp->vlan2_mask);
-
- /* Initialize the TX DMA channel registers */
- bfin_write_DMA2_X_COUNT(0);
- bfin_write_DMA2_X_MODIFY(4);
- bfin_write_DMA2_Y_COUNT(0);
- bfin_write_DMA2_Y_MODIFY(0);
-
- /* Initialize the RX DMA channel registers */
- bfin_write_DMA1_X_COUNT(0);
- bfin_write_DMA1_X_MODIFY(4);
- bfin_write_DMA1_Y_COUNT(0);
- bfin_write_DMA1_Y_MODIFY(0);
-}
-
-static void setup_mac_addr(u8 *mac_addr)
-{
- u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]);
- u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]);
-
- /* this depends on a little-endian machine */
- bfin_write_EMAC_ADDRLO(addr_low);
- bfin_write_EMAC_ADDRHI(addr_hi);
-}
-
-static int bfin_mac_set_mac_address(struct net_device *dev, void *p)
-{
- struct sockaddr *addr = p;
- if (netif_running(dev))
- return -EBUSY;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- setup_mac_addr(dev->dev_addr);
- return 0;
-}
-
-#ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
-#define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE)
-
-static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev,
- struct ifreq *ifr, int cmd)
-{
- struct hwtstamp_config config;
- struct bfin_mac_local *lp = netdev_priv(netdev);
- u16 ptpctl;
- u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff;
-
- if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
- return -EFAULT;
-
- pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
- __func__, config.flags, config.tx_type, config.rx_filter);
-
- /* reserved for future extensions */
- if (config.flags)
- return -EINVAL;
-
- if ((config.tx_type != HWTSTAMP_TX_OFF) &&
- (config.tx_type != HWTSTAMP_TX_ON))
- return -ERANGE;
-
- ptpctl = bfin_read_EMAC_PTP_CTL();
-
- switch (config.rx_filter) {
- case HWTSTAMP_FILTER_NONE:
- /*
- * Dont allow any timestamping
- */
- ptpfv3 = 0xFFFFFFFF;
- bfin_write_EMAC_PTP_FV3(ptpfv3);
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
- case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
- /*
- * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL)
- * to enable all the field matches.
- */
- ptpctl &= ~0x1F00;
- bfin_write_EMAC_PTP_CTL(ptpctl);
- /*
- * Keep the default values of the EMAC_PTP_FOFF register.
- */
- ptpfoff = 0x4A24170C;
- bfin_write_EMAC_PTP_FOFF(ptpfoff);
- /*
- * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
- * registers.
- */
- ptpfv1 = 0x11040800;
- bfin_write_EMAC_PTP_FV1(ptpfv1);
- ptpfv2 = 0x0140013F;
- bfin_write_EMAC_PTP_FV2(ptpfv2);
- /*
- * The default value (0xFFFC) allows the timestamping of both
- * received Sync messages and Delay_Req messages.
- */
- ptpfv3 = 0xFFFFFFFC;
- bfin_write_EMAC_PTP_FV3(ptpfv3);
-
- config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
- break;
- case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
- /* Clear all five comparison mask bits (bits[12:8]) in the
- * EMAC_PTP_CTL register to enable all the field matches.
- */
- ptpctl &= ~0x1F00;
- bfin_write_EMAC_PTP_CTL(ptpctl);
- /*
- * Keep the default values of the EMAC_PTP_FOFF register, except set
- * the PTPCOF field to 0x2A.
- */
- ptpfoff = 0x2A24170C;
- bfin_write_EMAC_PTP_FOFF(ptpfoff);
- /*
- * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
- * registers.
- */
- ptpfv1 = 0x11040800;
- bfin_write_EMAC_PTP_FV1(ptpfv1);
- ptpfv2 = 0x0140013F;
- bfin_write_EMAC_PTP_FV2(ptpfv2);
- /*
- * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set
- * the value to 0xFFF0.
- */
- ptpfv3 = 0xFFFFFFF0;
- bfin_write_EMAC_PTP_FV3(ptpfv3);
-
- config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
- break;
- case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
- /*
- * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the
- * EFTM and PTPCM field comparison.
- */
- ptpctl &= ~0x1100;
- bfin_write_EMAC_PTP_CTL(ptpctl);
- /*
- * Keep the default values of all the fields of the EMAC_PTP_FOFF
- * register, except set the PTPCOF field to 0x0E.
- */
- ptpfoff = 0x0E24170C;
- bfin_write_EMAC_PTP_FOFF(ptpfoff);
- /*
- * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which
- * corresponds to PTP messages on the MAC layer.
- */
- ptpfv1 = 0x110488F7;
- bfin_write_EMAC_PTP_FV1(ptpfv1);
- ptpfv2 = 0x0140013F;
- bfin_write_EMAC_PTP_FV2(ptpfv2);
- /*
- * To allow the timestamping of Pdelay_Req and Pdelay_Resp
- * messages, set the value to 0xFFF0.
- */
- ptpfv3 = 0xFFFFFFF0;
- bfin_write_EMAC_PTP_FV3(ptpfv3);
-
- config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
- break;
- default:
- return -ERANGE;
- }
-
- if (config.tx_type == HWTSTAMP_TX_OFF &&
- bfin_mac_hwtstamp_is_none(config.rx_filter)) {
- ptpctl &= ~PTP_EN;
- bfin_write_EMAC_PTP_CTL(ptpctl);
-
- SSYNC();
- } else {
- ptpctl |= PTP_EN;
- bfin_write_EMAC_PTP_CTL(ptpctl);
-
- /*
- * clear any existing timestamp
- */
- bfin_read_EMAC_PTP_RXSNAPLO();
- bfin_read_EMAC_PTP_RXSNAPHI();
-
- bfin_read_EMAC_PTP_TXSNAPLO();
- bfin_read_EMAC_PTP_TXSNAPHI();
-
- /*
- * Set registers so that rollover occurs soon to test this.
- */
- bfin_write_EMAC_PTP_TIMELO(0x00000000);
- bfin_write_EMAC_PTP_TIMEHI(0xFF800000);
-
- SSYNC();
-
- lp->compare.last_update = 0;
- timecounter_init(&lp->clock,
- &lp->cycles,
- ktime_to_ns(ktime_get_real()));
- timecompare_update(&lp->compare, 0);
- }
-
- lp->stamp_cfg = config;
- return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
- -EFAULT : 0;
-}
-
-static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp)
-{
- ktime_t sys = ktime_get_real();
-
- pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n",
- __func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec,
- sys.tv.nsec, cmp->offset, cmp->skew);
-}
-
-static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
-{
- struct bfin_mac_local *lp = netdev_priv(netdev);
-
- if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
- int timeout_cnt = MAX_TIMEOUT_CNT;
-
- /* When doing time stamping, keep the connection to the socket
- * a while longer
- */
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
-
- /*
- * The timestamping is done at the EMAC module's MII/RMII interface
- * when the module sees the Start of Frame of an event message packet. This
- * interface is the closest possible place to the physical Ethernet transmission
- * medium, providing the best timing accuracy.
- */
- while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
- udelay(1);
- if (timeout_cnt == 0)
- netdev_err(netdev, "timestamp the TX packet failed\n");
- else {
- struct skb_shared_hwtstamps shhwtstamps;
- u64 ns;
- u64 regval;
-
- regval = bfin_read_EMAC_PTP_TXSNAPLO();
- regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32;
- memset(&shhwtstamps, 0, sizeof(shhwtstamps));
- ns = timecounter_cyc2time(&lp->clock,
- regval);
- timecompare_update(&lp->compare, ns);
- shhwtstamps.hwtstamp = ns_to_ktime(ns);
- shhwtstamps.syststamp =
- timecompare_transform(&lp->compare, ns);
- skb_tstamp_tx(skb, &shhwtstamps);
-
- bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare);
- }
- }
-}
-
-static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
-{
- struct bfin_mac_local *lp = netdev_priv(netdev);
- u32 valid;
- u64 regval, ns;
- struct skb_shared_hwtstamps *shhwtstamps;
-
- if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter))
- return;
-
- valid = bfin_read_EMAC_PTP_ISTAT() & RXEL;
- if (!valid)
- return;
-
- shhwtstamps = skb_hwtstamps(skb);
-
- regval = bfin_read_EMAC_PTP_RXSNAPLO();
- regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32;
- ns = timecounter_cyc2time(&lp->clock, regval);
- timecompare_update(&lp->compare, ns);
- memset(shhwtstamps, 0, sizeof(*shhwtstamps));
- shhwtstamps->hwtstamp = ns_to_ktime(ns);
- shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns);
-
- bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare);
-}
-
-/*
- * bfin_read_clock - read raw cycle counter (to be used by time counter)
- */
-static cycle_t bfin_read_clock(const struct cyclecounter *tc)
-{
- u64 stamp;
-
- stamp = bfin_read_EMAC_PTP_TIMELO();
- stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL;
-
- return stamp;
-}
-
-#define PTP_CLK 25000000
-
-static void bfin_mac_hwtstamp_init(struct net_device *netdev)
-{
- struct bfin_mac_local *lp = netdev_priv(netdev);
- u64 append;
-
- /* Initialize hardware timer */
- append = PTP_CLK * (1ULL << 32);
- do_div(append, get_sclk());
- bfin_write_EMAC_PTP_ADDEND((u32)append);
-
- memset(&lp->cycles, 0, sizeof(lp->cycles));
- lp->cycles.read = bfin_read_clock;
- lp->cycles.mask = CLOCKSOURCE_MASK(64);
- lp->cycles.mult = 1000000000 / PTP_CLK;
- lp->cycles.shift = 0;
-
- /* Synchronize our NIC clock against system wall clock */
- memset(&lp->compare, 0, sizeof(lp->compare));
- lp->compare.source = &lp->clock;
- lp->compare.target = ktime_get_real;
- lp->compare.num_samples = 10;
-
- /* Initialize hwstamp config */
- lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
- lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
-}
-
-#else
-# define bfin_mac_hwtstamp_is_none(cfg) 0
-# define bfin_mac_hwtstamp_init(dev)
-# define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP)
-# define bfin_rx_hwtstamp(dev, skb)
-# define bfin_tx_hwtstamp(dev, skb)
-#endif
-
-static inline void _tx_reclaim_skb(void)
-{
- do {
- tx_list_head->desc_a.config &= ~DMAEN;
- tx_list_head->status.status_word = 0;
- if (tx_list_head->skb) {
- dev_kfree_skb(tx_list_head->skb);
- tx_list_head->skb = NULL;
- }
- tx_list_head = tx_list_head->next;
-
- } while (tx_list_head->status.status_word != 0);
-}
-
-static void tx_reclaim_skb(struct bfin_mac_local *lp)
-{
- int timeout_cnt = MAX_TIMEOUT_CNT;
-
- if (tx_list_head->status.status_word != 0)
- _tx_reclaim_skb();
-
- if (current_tx_ptr->next == tx_list_head) {
- while (tx_list_head->status.status_word == 0) {
- /* slow down polling to avoid too many queue stop. */
- udelay(10);
- /* reclaim skb if DMA is not running. */
- if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN))
- break;
- if (timeout_cnt-- < 0)
- break;
- }
-
- if (timeout_cnt >= 0)
- _tx_reclaim_skb();
- else
- netif_stop_queue(lp->ndev);
- }
-
- if (current_tx_ptr->next != tx_list_head &&
- netif_queue_stopped(lp->ndev))
- netif_wake_queue(lp->ndev);
-
- if (tx_list_head != current_tx_ptr) {
- /* shorten the timer interval if tx queue is stopped */
- if (netif_queue_stopped(lp->ndev))
- lp->tx_reclaim_timer.expires =
- jiffies + (TX_RECLAIM_JIFFIES >> 4);
- else
- lp->tx_reclaim_timer.expires =
- jiffies + TX_RECLAIM_JIFFIES;
-
- mod_timer(&lp->tx_reclaim_timer,
- lp->tx_reclaim_timer.expires);
- }
-
- return;
-}
-
-static void tx_reclaim_skb_timeout(unsigned long lp)
-{
- tx_reclaim_skb((struct bfin_mac_local *)lp);
-}
-
-static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- u16 *data;
- u32 data_align = (unsigned long)(skb->data) & 0x3;
-
- current_tx_ptr->skb = skb;
-
- if (data_align == 0x2) {
- /* move skb->data to current_tx_ptr payload */
- data = (u16 *)(skb->data) - 1;
- *data = (u16)(skb->len);
- /*
- * When transmitting an Ethernet packet, the PTP_TSYNC module requires
- * a DMA_Length_Word field associated with the packet. The lower 12 bits
- * of this field are the length of the packet payload in bytes and the higher
- * 4 bits are the timestamping enable field.
- */
- if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
- *data |= 0x1000;
-
- current_tx_ptr->desc_a.start_addr = (u32)data;
- /* this is important! */
- blackfin_dcache_flush_range((u32)data,
- (u32)((u8 *)data + skb->len + 4));
- } else {
- *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
- /* enable timestamping for the sent packet */
- if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
- *((u16 *)(current_tx_ptr->packet)) |= 0x1000;
- memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
- skb->len);
- current_tx_ptr->desc_a.start_addr =
- (u32)current_tx_ptr->packet;
- blackfin_dcache_flush_range(
- (u32)current_tx_ptr->packet,
- (u32)(current_tx_ptr->packet + skb->len + 2));
- }
-
- /* make sure the internal data buffers in the core are drained
- * so that the DMA descriptors are completely written when the
- * DMA engine goes to fetch them below
- */
- SSYNC();
-
- /* always clear status buffer before start tx dma */
- current_tx_ptr->status.status_word = 0;
-
- /* enable this packet's dma */
- current_tx_ptr->desc_a.config |= DMAEN;
-
- /* tx dma is running, just return */
- if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
- goto out;
-
- /* tx dma is not running */
- bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a));
- /* dma enabled, read from memory, size is 6 */
- bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config);
- /* Turn on the EMAC tx */
- bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
-
-out:
- bfin_tx_hwtstamp(dev, skb);
-
- current_tx_ptr = current_tx_ptr->next;
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += (skb->len);
-
- tx_reclaim_skb(lp);
-
- return NETDEV_TX_OK;
-}
-
-#define IP_HEADER_OFF 0
-#define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \
- RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE)
-
-static void bfin_mac_rx(struct net_device *dev)
-{
- struct sk_buff *skb, *new_skb;
- unsigned short len;
- struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev);
-#if defined(BFIN_MAC_CSUM_OFFLOAD)
- unsigned int i;
- unsigned char fcs[ETH_FCS_LEN + 1];
-#endif
-
- /* check if frame status word reports an error condition
- * we which case we simply drop the packet
- */
- if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
- netdev_notice(dev, "rx: receive error - packet dropped\n");
- dev->stats.rx_dropped++;
- goto out;
- }
-
- /* allocate a new skb for next time receive */
- skb = current_rx_ptr->skb;
-
- new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
- if (!new_skb) {
- netdev_notice(dev, "rx: low on mem - packet dropped\n");
- dev->stats.rx_dropped++;
- goto out;
- }
- /* reserve 2 bytes for RXDWA padding */
- skb_reserve(new_skb, NET_IP_ALIGN);
- /* Invidate the data cache of skb->data range when it is write back
- * cache. It will prevent overwritting the new data from DMA
- */
- blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
- (unsigned long)new_skb->end);
-
- current_rx_ptr->skb = new_skb;
- current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
-
- len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
- /* Deduce Ethernet FCS length from Ethernet payload length */
- len -= ETH_FCS_LEN;
- skb_put(skb, len);
-
- skb->protocol = eth_type_trans(skb, dev);
-
- bfin_rx_hwtstamp(dev, skb);
-
-#if defined(BFIN_MAC_CSUM_OFFLOAD)
- /* Checksum offloading only works for IPv4 packets with the standard IP header
- * length of 20 bytes, because the blackfin MAC checksum calculation is
- * based on that assumption. We must NOT use the calculated checksum if our
- * IP version or header break that assumption.
- */
- if (skb->data[IP_HEADER_OFF] == 0x45) {
- skb->csum = current_rx_ptr->status.ip_payload_csum;
- /*
- * Deduce Ethernet FCS from hardware generated IP payload checksum.
- * IP checksum is based on 16-bit one's complement algorithm.
- * To deduce a value from checksum is equal to add its inversion.
- * If the IP payload len is odd, the inversed FCS should also
- * begin from odd address and leave first byte zero.
- */
- if (skb->len % 2) {
- fcs[0] = 0;
- for (i = 0; i < ETH_FCS_LEN; i++)
- fcs[i + 1] = ~skb->data[skb->len + i];
- skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum);
- } else {
- for (i = 0; i < ETH_FCS_LEN; i++)
- fcs[i] = ~skb->data[skb->len + i];
- skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum);
- }
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
-#endif
-
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += len;
-out:
- current_rx_ptr->status.status_word = 0x00000000;
- current_rx_ptr = current_rx_ptr->next;
-}
-
-/* interrupt routine to handle rx and error signal */
-static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- int number = 0;
-
-get_one_packet:
- if (current_rx_ptr->status.status_word == 0) {
- /* no more new packet received */
- if (number == 0) {
- if (current_rx_ptr->next->status.status_word != 0) {
- current_rx_ptr = current_rx_ptr->next;
- goto real_rx;
- }
- }
- bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() |
- DMA_DONE | DMA_ERR);
- return IRQ_HANDLED;
- }
-
-real_rx:
- bfin_mac_rx(dev);
- number++;
- goto get_one_packet;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void bfin_mac_poll(struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
-
- disable_irq(IRQ_MAC_RX);
- bfin_mac_interrupt(IRQ_MAC_RX, dev);
- tx_reclaim_skb(lp);
- enable_irq(IRQ_MAC_RX);
-}
-#endif /* CONFIG_NET_POLL_CONTROLLER */
-
-static void bfin_mac_disable(void)
-{
- unsigned int opmode;
-
- opmode = bfin_read_EMAC_OPMODE();
- opmode &= (~RE);
- opmode &= (~TE);
- /* Turn off the EMAC */
- bfin_write_EMAC_OPMODE(opmode);
-}
-
-/*
- * Enable Interrupts, Receive, and Transmit
- */
-static int bfin_mac_enable(struct phy_device *phydev)
-{
- int ret;
- u32 opmode;
-
- pr_debug("%s\n", __func__);
-
- /* Set RX DMA */
- bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
- bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
-
- /* Wait MII done */
- ret = bfin_mdio_poll();
- if (ret)
- return ret;
-
- /* We enable only RX here */
- /* ASTP : Enable Automatic Pad Stripping
- PR : Promiscuous Mode for test
- PSF : Receive frames with total length less than 64 bytes.
- FDMODE : Full Duplex Mode
- LB : Internal Loopback for test
- RE : Receiver Enable */
- opmode = bfin_read_EMAC_OPMODE();
- if (opmode & FDMODE)
- opmode |= PSF;
- else
- opmode |= DRO | DC | PSF;
- opmode |= RE;
-
- if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
- opmode |= RMII; /* For Now only 100MBit are supported */
-#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
- if (__SILICON_REVISION__ < 3) {
- /*
- * This isn't publicly documented (fun times!), but in
- * silicon <=0.2, the RX and TX pins are clocked together.
- * So in order to recv, we must enable the transmit side
- * as well. This will cause a spurious TX interrupt too,
- * but we can easily consume that.
- */
- opmode |= TE;
- }
-#endif
- }
-
- /* Turn on the EMAC rx */
- bfin_write_EMAC_OPMODE(opmode);
-
- return 0;
-}
-
-/* Our watchdog timed out. Called by the networking layer */
-static void bfin_mac_timeout(struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
-
- pr_debug("%s: %s\n", dev->name, __func__);
-
- bfin_mac_disable();
-
- del_timer(&lp->tx_reclaim_timer);
-
- /* reset tx queue and free skb */
- while (tx_list_head != current_tx_ptr) {
- tx_list_head->desc_a.config &= ~DMAEN;
- tx_list_head->status.status_word = 0;
- if (tx_list_head->skb) {
- dev_kfree_skb(tx_list_head->skb);
- tx_list_head->skb = NULL;
- }
- tx_list_head = tx_list_head->next;
- }
-
- if (netif_queue_stopped(lp->ndev))
- netif_wake_queue(lp->ndev);
-
- bfin_mac_enable(lp->phydev);
-
- /* We can accept TX packets again */
- dev->trans_start = jiffies; /* prevent tx timeout */
- netif_wake_queue(dev);
-}
-
-static void bfin_mac_multicast_hash(struct net_device *dev)
-{
- u32 emac_hashhi, emac_hashlo;
- struct netdev_hw_addr *ha;
- u32 crc;
-
- emac_hashhi = emac_hashlo = 0;
-
- netdev_for_each_mc_addr(ha, dev) {
- crc = ether_crc(ETH_ALEN, ha->addr);
- crc >>= 26;
-
- if (crc & 0x20)
- emac_hashhi |= 1 << (crc & 0x1f);
- else
- emac_hashlo |= 1 << (crc & 0x1f);
- }
-
- bfin_write_EMAC_HASHHI(emac_hashhi);
- bfin_write_EMAC_HASHLO(emac_hashlo);
-}
-
-/*
- * This routine will, depending on the values passed to it,
- * either make it accept multicast packets, go into
- * promiscuous mode (for TCPDUMP and cousins) or accept
- * a select set of multicast packets
- */
-static void bfin_mac_set_multicast_list(struct net_device *dev)
-{
- u32 sysctl;
-
- if (dev->flags & IFF_PROMISC) {
- netdev_info(dev, "set promisc mode\n");
- sysctl = bfin_read_EMAC_OPMODE();
- sysctl |= PR;
- bfin_write_EMAC_OPMODE(sysctl);
- } else if (dev->flags & IFF_ALLMULTI) {
- /* accept all multicast */
- sysctl = bfin_read_EMAC_OPMODE();
- sysctl |= PAM;
- bfin_write_EMAC_OPMODE(sysctl);
- } else if (!netdev_mc_empty(dev)) {
- /* set up multicast hash table */
- sysctl = bfin_read_EMAC_OPMODE();
- sysctl |= HM;
- bfin_write_EMAC_OPMODE(sysctl);
- bfin_mac_multicast_hash(dev);
- } else {
- /* clear promisc or multicast mode */
- sysctl = bfin_read_EMAC_OPMODE();
- sysctl &= ~(RAF | PAM);
- bfin_write_EMAC_OPMODE(sysctl);
- }
-}
-
-static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- struct bfin_mac_local *lp = netdev_priv(netdev);
-
- if (!netif_running(netdev))
- return -EINVAL;
-
- switch (cmd) {
- case SIOCSHWTSTAMP:
- return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
- default:
- if (lp->phydev)
- return phy_mii_ioctl(lp->phydev, ifr, cmd);
- else
- return -EOPNOTSUPP;
- }
-}
-
-/*
- * this puts the device in an inactive state
- */
-static void bfin_mac_shutdown(struct net_device *dev)
-{
- /* Turn off the EMAC */
- bfin_write_EMAC_OPMODE(0x00000000);
- /* Turn off the EMAC RX DMA */
- bfin_write_DMA1_CONFIG(0x0000);
- bfin_write_DMA2_CONFIG(0x0000);
-}
-
-/*
- * Open and Initialize the interface
- *
- * Set up everything, reset the card, etc..
- */
-static int bfin_mac_open(struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- int ret;
- pr_debug("%s: %s\n", dev->name, __func__);
-
- /*
- * Check that the address is valid. If its not, refuse
- * to bring the device up. The user must specify an
- * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
- */
- if (!is_valid_ether_addr(dev->dev_addr)) {
- netdev_warn(dev, "no valid ethernet hw addr\n");
- return -EINVAL;
- }
-
- /* initial rx and tx list */
- ret = desc_list_init();
- if (ret)
- return ret;
-
- phy_start(lp->phydev);
- phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
- setup_system_regs(dev);
- setup_mac_addr(dev->dev_addr);
-
- bfin_mac_disable();
- ret = bfin_mac_enable(lp->phydev);
- if (ret)
- return ret;
- pr_debug("hardware init finished\n");
-
- netif_start_queue(dev);
- netif_carrier_on(dev);
-
- return 0;
-}
-
-/*
- * this makes the board clean up everything that it can
- * and not talk to the outside world. Caused by
- * an 'ifconfig ethX down'
- */
-static int bfin_mac_close(struct net_device *dev)
-{
- struct bfin_mac_local *lp = netdev_priv(dev);
- pr_debug("%s: %s\n", dev->name, __func__);
-
- netif_stop_queue(dev);
- netif_carrier_off(dev);
-
- phy_stop(lp->phydev);
- phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
-
- /* clear everything */
- bfin_mac_shutdown(dev);
-
- /* free the rx/tx buffers */
- desc_list_free();
-
- return 0;
-}
-
-static const struct net_device_ops bfin_mac_netdev_ops = {
- .ndo_open = bfin_mac_open,
- .ndo_stop = bfin_mac_close,
- .ndo_start_xmit = bfin_mac_hard_start_xmit,
- .ndo_set_mac_address = bfin_mac_set_mac_address,
- .ndo_tx_timeout = bfin_mac_timeout,
- .ndo_set_multicast_list = bfin_mac_set_multicast_list,
- .ndo_do_ioctl = bfin_mac_ioctl,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = bfin_mac_poll,
-#endif
-};
-
-static int __devinit bfin_mac_probe(struct platform_device *pdev)
-{
- struct net_device *ndev;
- struct bfin_mac_local *lp;
- struct platform_device *pd;
- struct bfin_mii_bus_platform_data *mii_bus_data;
- int rc;
-
- ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
- if (!ndev) {
- dev_err(&pdev->dev, "Cannot allocate net device!\n");
- return -ENOMEM;
- }
-
- SET_NETDEV_DEV(ndev, &pdev->dev);
- platform_set_drvdata(pdev, ndev);
- lp = netdev_priv(ndev);
- lp->ndev = ndev;
-
- /* Grab the MAC address in the MAC */
- *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO());
- *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI());
-
- /* probe mac */
- /*todo: how to proble? which is revision_register */
- bfin_write_EMAC_ADDRLO(0x12345678);
- if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
- dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n");
- rc = -ENODEV;
- goto out_err_probe_mac;
- }
-
-
- /*
- * Is it valid? (Did bootloader initialize it?)
- * Grab the MAC from the board somehow
- * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c
- */
- if (!is_valid_ether_addr(ndev->dev_addr))
- bfin_get_ether_addr(ndev->dev_addr);
-
- /* If still not valid, get a random one */
- if (!is_valid_ether_addr(ndev->dev_addr))
- random_ether_addr(ndev->dev_addr);
-
- setup_mac_addr(ndev->dev_addr);
-
- if (!pdev->dev.platform_data) {
- dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
- rc = -ENODEV;
- goto out_err_probe_mac;
- }
- pd = pdev->dev.platform_data;
- lp->mii_bus = platform_get_drvdata(pd);
- if (!lp->mii_bus) {
- dev_err(&pdev->dev, "Cannot get mii_bus!\n");
- rc = -ENODEV;
- goto out_err_probe_mac;
- }
- lp->mii_bus->priv = ndev;
- mii_bus_data = pd->dev.platform_data;
-
- rc = mii_probe(ndev, mii_bus_data->phy_mode);
- if (rc) {
- dev_err(&pdev->dev, "MII Probe failed!\n");
- goto out_err_mii_probe;
- }
-
- lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
- lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
-
- /* Fill in the fields of the device structure with ethernet values. */
- ether_setup(ndev);
-
- ndev->netdev_ops = &bfin_mac_netdev_ops;
- ndev->ethtool_ops = &bfin_mac_ethtool_ops;
-
- init_timer(&lp->tx_reclaim_timer);
- lp->tx_reclaim_timer.data = (unsigned long)lp;
- lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
-
- spin_lock_init(&lp->lock);
-
- /* now, enable interrupts */
- /* register irq handler */
- rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
- IRQF_DISABLED, "EMAC_RX", ndev);
- if (rc) {
- dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
- rc = -EBUSY;
- goto out_err_request_irq;
- }
-
- rc = register_netdev(ndev);
- if (rc) {
- dev_err(&pdev->dev, "Cannot register net device!\n");
- goto out_err_reg_ndev;
- }
-
- bfin_mac_hwtstamp_init(ndev);
-
- /* now, print out the card info, in a short format.. */
- netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
-
- return 0;
-
-out_err_reg_ndev:
- free_irq(IRQ_MAC_RX, ndev);
-out_err_request_irq:
-out_err_mii_probe:
- mdiobus_unregister(lp->mii_bus);
- mdiobus_free(lp->mii_bus);
-out_err_probe_mac:
- platform_set_drvdata(pdev, NULL);
- free_netdev(ndev);
-
- return rc;
-}
-
-static int __devexit bfin_mac_remove(struct platform_device *pdev)
-{
- struct net_device *ndev = platform_get_drvdata(pdev);
- struct bfin_mac_local *lp = netdev_priv(ndev);
-
- platform_set_drvdata(pdev, NULL);
-
- lp->mii_bus->priv = NULL;
-
- unregister_netdev(ndev);
-
- free_irq(IRQ_MAC_RX, ndev);
-
- free_netdev(ndev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- struct net_device *net_dev = platform_get_drvdata(pdev);
- struct bfin_mac_local *lp = netdev_priv(net_dev);
-
- if (lp->wol) {
- bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE);
- bfin_write_EMAC_WKUP_CTL(MPKE);
- enable_irq_wake(IRQ_MAC_WAKEDET);
- } else {
- if (netif_running(net_dev))
- bfin_mac_close(net_dev);
- }
-
- return 0;
-}
-
-static int bfin_mac_resume(struct platform_device *pdev)
-{
- struct net_device *net_dev = platform_get_drvdata(pdev);
- struct bfin_mac_local *lp = netdev_priv(net_dev);
-
- if (lp->wol) {
- bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
- bfin_write_EMAC_WKUP_CTL(0);
- disable_irq_wake(IRQ_MAC_WAKEDET);
- } else {
- if (netif_running(net_dev))
- bfin_mac_open(net_dev);
- }
-
- return 0;
-}
-#else
-#define bfin_mac_suspend NULL
-#define bfin_mac_resume NULL
-#endif /* CONFIG_PM */
-
-static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
-{
- struct mii_bus *miibus;
- struct bfin_mii_bus_platform_data *mii_bus_pd;
- const unsigned short *pin_req;
- int rc, i;
-
- mii_bus_pd = dev_get_platdata(&pdev->dev);
- if (!mii_bus_pd) {
- dev_err(&pdev->dev, "No peripherals in platform data!\n");
- return -EINVAL;
- }
-
- /*
- * We are setting up a network card,
- * so set the GPIO pins to Ethernet mode
- */
- pin_req = mii_bus_pd->mac_peripherals;
- rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
- if (rc) {
- dev_err(&pdev->dev, "Requesting peripherals failed!\n");
- return rc;
- }
-
- rc = -ENOMEM;
- miibus = mdiobus_alloc();
- if (miibus == NULL)
- goto out_err_alloc;
- miibus->read = bfin_mdiobus_read;
- miibus->write = bfin_mdiobus_write;
- miibus->reset = bfin_mdiobus_reset;
-
- miibus->parent = &pdev->dev;
- miibus->name = "bfin_mii_bus";
- miibus->phy_mask = mii_bus_pd->phy_mask;
-
- snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
- miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
- if (!miibus->irq)
- goto out_err_irq_alloc;
-
- for (i = rc; i < PHY_MAX_ADDR; ++i)
- miibus->irq[i] = PHY_POLL;
-
- rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
- if (rc != mii_bus_pd->phydev_number)
- dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
- mii_bus_pd->phydev_number);
- for (i = 0; i < rc; ++i) {
- unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
- if (phyaddr < PHY_MAX_ADDR)
- miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
- else
- dev_err(&pdev->dev,
- "Invalid PHY address %i for phydev %i\n",
- phyaddr, i);
- }
-
- rc = mdiobus_register(miibus);
- if (rc) {
- dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
- goto out_err_mdiobus_register;
- }
-
- platform_set_drvdata(pdev, miibus);
- return 0;
-
-out_err_mdiobus_register:
- kfree(miibus->irq);
-out_err_irq_alloc:
- mdiobus_free(miibus);
-out_err_alloc:
- peripheral_free_list(pin_req);
-
- return rc;
-}
-
-static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
-{
- struct mii_bus *miibus = platform_get_drvdata(pdev);
- struct bfin_mii_bus_platform_data *mii_bus_pd =
- dev_get_platdata(&pdev->dev);
-
- platform_set_drvdata(pdev, NULL);
- mdiobus_unregister(miibus);
- kfree(miibus->irq);
- mdiobus_free(miibus);
- peripheral_free_list(mii_bus_pd->mac_peripherals);
-
- return 0;
-}
-
-static struct platform_driver bfin_mii_bus_driver = {
- .probe = bfin_mii_bus_probe,
- .remove = __devexit_p(bfin_mii_bus_remove),
- .driver = {
- .name = "bfin_mii_bus",
- .owner = THIS_MODULE,
- },
-};
-
-static struct platform_driver bfin_mac_driver = {
- .probe = bfin_mac_probe,
- .remove = __devexit_p(bfin_mac_remove),
- .resume = bfin_mac_resume,
- .suspend = bfin_mac_suspend,
- .driver = {
- .name = KBUILD_MODNAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init bfin_mac_init(void)
-{
- int ret;
- ret = platform_driver_register(&bfin_mii_bus_driver);
- if (!ret)
- return platform_driver_register(&bfin_mac_driver);
- return -ENODEV;
-}
-
-module_init(bfin_mac_init);
-
-static void __exit bfin_mac_cleanup(void)
-{
- platform_driver_unregister(&bfin_mac_driver);
- platform_driver_unregister(&bfin_mii_bus_driver);
-}
-
-module_exit(bfin_mac_cleanup);
-
+++ /dev/null
-/*
- * Blackfin On-Chip MAC Driver
- *
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-#ifndef _BFIN_MAC_H_
-#define _BFIN_MAC_H_
-
-#include <linux/net_tstamp.h>
-#include <linux/clocksource.h>
-#include <linux/timecompare.h>
-#include <linux/timer.h>
-#include <linux/etherdevice.h>
-#include <linux/bfin_mac.h>
-
-/*
- * Disable hardware checksum for bug #5600 if writeback cache is
- * enabled. Otherwize, corrupted RX packet will be sent up stack
- * without error mark.
- */
-#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
-#define BFIN_MAC_CSUM_OFFLOAD
-#endif
-
-#define TX_RECLAIM_JIFFIES (HZ / 5)
-
-struct dma_descriptor {
- struct dma_descriptor *next_dma_desc;
- unsigned long start_addr;
- unsigned short config;
- unsigned short x_count;
-};
-
-struct status_area_rx {
-#if defined(BFIN_MAC_CSUM_OFFLOAD)
- unsigned short ip_hdr_csum; /* ip header checksum */
- /* ip payload(udp or tcp or others) checksum */
- unsigned short ip_payload_csum;
-#endif
- unsigned long status_word; /* the frame status word */
-};
-
-struct status_area_tx {
- unsigned long status_word; /* the frame status word */
-};
-
-/* use two descriptors for a packet */
-struct net_dma_desc_rx {
- struct net_dma_desc_rx *next;
- struct sk_buff *skb;
- struct dma_descriptor desc_a;
- struct dma_descriptor desc_b;
- struct status_area_rx status;
-};
-
-/* use two descriptors for a packet */
-struct net_dma_desc_tx {
- struct net_dma_desc_tx *next;
- struct sk_buff *skb;
- struct dma_descriptor desc_a;
- struct dma_descriptor desc_b;
- unsigned char packet[1560];
- struct status_area_tx status;
-};
-
-struct bfin_mac_local {
- /*
- * these are things that the kernel wants me to keep, so users
- * can find out semi-useless statistics of how well the card is
- * performing
- */
- struct net_device_stats stats;
-
- spinlock_t lock;
-
- int wol; /* Wake On Lan */
- int irq_wake_requested;
- struct timer_list tx_reclaim_timer;
- struct net_device *ndev;
-
- /* Data for EMAC_VLAN1 regs */
- u16 vlan1_mask, vlan2_mask;
-
- /* MII and PHY stuffs */
- int old_link; /* used by bf537_adjust_link */
- int old_speed;
- int old_duplex;
-
- struct phy_device *phydev;
- struct mii_bus *mii_bus;
-
-#if defined(CONFIG_BFIN_MAC_USE_HWSTAMP)
- struct cyclecounter cycles;
- struct timecounter clock;
- struct timecompare compare;
- struct hwtstamp_config stamp_cfg;
-#endif
-};
-
-extern void bfin_get_ether_addr(char *addr);
-
-#endif
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/atheros/Kconfig"
+source "drivers/net/ethernet/adi/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
+obj-$(CONFIG_NET_BFIN) += adi/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
--- /dev/null
+#
+# Blackfin device configuration
+#
+
+config NET_BFIN
+ bool "Blackfin devices"
+ depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y.
+ Make sure you know the name of your card. Read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ If unsure, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the remaining Blackfin card questions. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_BFIN
+
+config BFIN_MAC
+ tristate "Blackfin on-chip MAC support"
+ depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
+ select CRC32
+ select MII
+ select PHYLIB
+ select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+ ---help---
+ This is the driver for Blackfin on-chip mac device. Say Y if you want
+ it compiled into the kernel. This driver is also available as a
+ module ( = code which can be inserted in and removed from the running
+ kernel whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+ bool "Use L1 memory for rx/tx packets"
+ depends on BFIN_MAC && (BF527 || BF537)
+ default y
+ ---help---
+ To get maximum network performance, you should use L1 memory as rx/tx
+ buffers. Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+ int "Number of transmit buffer packets"
+ depends on BFIN_MAC
+ range 6 10 if BFIN_MAC_USE_L1
+ range 10 100
+ default "10"
+ ---help---
+ Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+ int "Number of receive buffer packets"
+ depends on BFIN_MAC
+ range 20 100 if BFIN_MAC_USE_L1
+ range 20 800
+ default "20"
+ ---help---
+ Set the number of buffer packets used in driver.
+
+config BFIN_MAC_USE_HWSTAMP
+ bool "Use IEEE 1588 hwstamp"
+ depends on BFIN_MAC && BF518
+ default y
+ ---help---
+ To support the IEEE 1588 Precision Time Protocol (PTP), select y here
+
+endif # NET_BFIN
--- /dev/null
+#
+# Makefile for the Blackfin device drivers.
+#
+
+obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
--- /dev/null
+/*
+ * Blackfin On-Chip MAC Driver
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define DRV_VERSION "1.1"
+#define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+
+#include <asm/dma.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/div64.h>
+#include <asm/dpmc.h>
+#include <asm/blackfin.h>
+#include <asm/cacheflush.h>
+#include <asm/portmux.h>
+#include <mach/pll.h>
+
+#include "bfin_mac.h"
+
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:bfin_mac");
+
+#if defined(CONFIG_BFIN_MAC_USE_L1)
+# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num)
+# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr)
+#else
+# define bfin_mac_alloc(dma_handle, size, num) \
+ dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL)
+# define bfin_mac_free(dma_handle, ptr, num) \
+ dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle)
+#endif
+
+#define PKT_BUF_SZ 1580
+
+#define MAX_TIMEOUT_CNT 500
+
+/* pointers to maintain transmit list */
+static struct net_dma_desc_tx *tx_list_head;
+static struct net_dma_desc_tx *tx_list_tail;
+static struct net_dma_desc_rx *rx_list_head;
+static struct net_dma_desc_rx *rx_list_tail;
+static struct net_dma_desc_rx *current_rx_ptr;
+static struct net_dma_desc_tx *current_tx_ptr;
+static struct net_dma_desc_tx *tx_desc;
+static struct net_dma_desc_rx *rx_desc;
+
+static void desc_list_free(void)
+{
+ struct net_dma_desc_rx *r;
+ struct net_dma_desc_tx *t;
+ int i;
+#if !defined(CONFIG_BFIN_MAC_USE_L1)
+ dma_addr_t dma_handle = 0;
+#endif
+
+ if (tx_desc) {
+ t = tx_list_head;
+ for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
+ if (t) {
+ if (t->skb) {
+ dev_kfree_skb(t->skb);
+ t->skb = NULL;
+ }
+ t = t->next;
+ }
+ }
+ bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM);
+ }
+
+ if (rx_desc) {
+ r = rx_list_head;
+ for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
+ if (r) {
+ if (r->skb) {
+ dev_kfree_skb(r->skb);
+ r->skb = NULL;
+ }
+ r = r->next;
+ }
+ }
+ bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM);
+ }
+}
+
+static int desc_list_init(void)
+{
+ int i;
+ struct sk_buff *new_skb;
+#if !defined(CONFIG_BFIN_MAC_USE_L1)
+ /*
+ * This dma_handle is useless in Blackfin dma_alloc_coherent().
+ * The real dma handler is the return value of dma_alloc_coherent().
+ */
+ dma_addr_t dma_handle;
+#endif
+
+ tx_desc = bfin_mac_alloc(&dma_handle,
+ sizeof(struct net_dma_desc_tx),
+ CONFIG_BFIN_TX_DESC_NUM);
+ if (tx_desc == NULL)
+ goto init_error;
+
+ rx_desc = bfin_mac_alloc(&dma_handle,
+ sizeof(struct net_dma_desc_rx),
+ CONFIG_BFIN_RX_DESC_NUM);
+ if (rx_desc == NULL)
+ goto init_error;
+
+ /* init tx_list */
+ tx_list_head = tx_list_tail = tx_desc;
+
+ for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
+ struct net_dma_desc_tx *t = tx_desc + i;
+ struct dma_descriptor *a = &(t->desc_a);
+ struct dma_descriptor *b = &(t->desc_b);
+
+ /*
+ * disable DMA
+ * read from memory WNR = 0
+ * wordsize is 32 bits
+ * 6 half words is desc size
+ * large desc flow
+ */
+ a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
+ a->start_addr = (unsigned long)t->packet;
+ a->x_count = 0;
+ a->next_dma_desc = b;
+
+ /*
+ * enabled DMA
+ * write to memory WNR = 1
+ * wordsize is 32 bits
+ * disable interrupt
+ * 6 half words is desc size
+ * large desc flow
+ */
+ b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
+ b->start_addr = (unsigned long)(&(t->status));
+ b->x_count = 0;
+
+ t->skb = NULL;
+ tx_list_tail->desc_b.next_dma_desc = a;
+ tx_list_tail->next = t;
+ tx_list_tail = t;
+ }
+ tx_list_tail->next = tx_list_head; /* tx_list is a circle */
+ tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a);
+ current_tx_ptr = tx_list_head;
+
+ /* init rx_list */
+ rx_list_head = rx_list_tail = rx_desc;
+
+ for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
+ struct net_dma_desc_rx *r = rx_desc + i;
+ struct dma_descriptor *a = &(r->desc_a);
+ struct dma_descriptor *b = &(r->desc_b);
+
+ /* allocate a new skb for next time receive */
+ new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
+ if (!new_skb) {
+ pr_notice("init: low on mem - packet dropped\n");
+ goto init_error;
+ }
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ /* Invidate the data cache of skb->data range when it is write back
+ * cache. It will prevent overwritting the new data from DMA
+ */
+ blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+ (unsigned long)new_skb->end);
+ r->skb = new_skb;
+
+ /*
+ * enabled DMA
+ * write to memory WNR = 1
+ * wordsize is 32 bits
+ * disable interrupt
+ * 6 half words is desc size
+ * large desc flow
+ */
+ a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
+ /* since RXDWA is enabled */
+ a->start_addr = (unsigned long)new_skb->data - 2;
+ a->x_count = 0;
+ a->next_dma_desc = b;
+
+ /*
+ * enabled DMA
+ * write to memory WNR = 1
+ * wordsize is 32 bits
+ * enable interrupt
+ * 6 half words is desc size
+ * large desc flow
+ */
+ b->config = DMAEN | WNR | WDSIZE_32 | DI_EN |
+ NDSIZE_6 | DMAFLOW_LARGE;
+ b->start_addr = (unsigned long)(&(r->status));
+ b->x_count = 0;
+
+ rx_list_tail->desc_b.next_dma_desc = a;
+ rx_list_tail->next = r;
+ rx_list_tail = r;
+ }
+ rx_list_tail->next = rx_list_head; /* rx_list is a circle */
+ rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a);
+ current_rx_ptr = rx_list_head;
+
+ return 0;
+
+init_error:
+ desc_list_free();
+ pr_err("kmalloc failed\n");
+ return -ENOMEM;
+}
+
+
+/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
+
+/*
+ * MII operations
+ */
+/* Wait until the previous MDC/MDIO transaction has completed */
+static int bfin_mdio_poll(void)
+{
+ int timeout_cnt = MAX_TIMEOUT_CNT;
+
+ /* poll the STABUSY bit */
+ while ((bfin_read_EMAC_STAADD()) & STABUSY) {
+ udelay(1);
+ if (timeout_cnt-- < 0) {
+ pr_err("wait MDC/MDIO transaction to complete timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+/* Read an off-chip register in a PHY through the MDC/MDIO port */
+static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ int ret;
+
+ ret = bfin_mdio_poll();
+ if (ret)
+ return ret;
+
+ /* read mode */
+ bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
+ SET_REGAD((u16) regnum) |
+ STABUSY);
+
+ ret = bfin_mdio_poll();
+ if (ret)
+ return ret;
+
+ return (int) bfin_read_EMAC_STADAT();
+}
+
+/* Write an off-chip register in a PHY through the MDC/MDIO port */
+static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+ u16 value)
+{
+ int ret;
+
+ ret = bfin_mdio_poll();
+ if (ret)
+ return ret;
+
+ bfin_write_EMAC_STADAT((u32) value);
+
+ /* write mode */
+ bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
+ SET_REGAD((u16) regnum) |
+ STAOP |
+ STABUSY);
+
+ return bfin_mdio_poll();
+}
+
+static int bfin_mdiobus_reset(struct mii_bus *bus)
+{
+ return 0;
+}
+
+static void bfin_mac_adjust_link(struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ struct phy_device *phydev = lp->phydev;
+ unsigned long flags;
+ int new_state = 0;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ if (phydev->link) {
+ /* Now we make sure that we can be in full duplex mode.
+ * If not, we operate in half-duplex mode. */
+ if (phydev->duplex != lp->old_duplex) {
+ u32 opmode = bfin_read_EMAC_OPMODE();
+ new_state = 1;
+
+ if (phydev->duplex)
+ opmode |= FDMODE;
+ else
+ opmode &= ~(FDMODE);
+
+ bfin_write_EMAC_OPMODE(opmode);
+ lp->old_duplex = phydev->duplex;
+ }
+
+ if (phydev->speed != lp->old_speed) {
+ if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+ u32 opmode = bfin_read_EMAC_OPMODE();
+ switch (phydev->speed) {
+ case 10:
+ opmode |= RMII_10;
+ break;
+ case 100:
+ opmode &= ~RMII_10;
+ break;
+ default:
+ netdev_warn(dev,
+ "Ack! Speed (%d) is not 10/100!\n",
+ phydev->speed);
+ break;
+ }
+ bfin_write_EMAC_OPMODE(opmode);
+ }
+
+ new_state = 1;
+ lp->old_speed = phydev->speed;
+ }
+
+ if (!lp->old_link) {
+ new_state = 1;
+ lp->old_link = 1;
+ }
+ } else if (lp->old_link) {
+ new_state = 1;
+ lp->old_link = 0;
+ lp->old_speed = 0;
+ lp->old_duplex = -1;
+ }
+
+ if (new_state) {
+ u32 opmode = bfin_read_EMAC_OPMODE();
+ phy_print_status(phydev);
+ pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
+ }
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+/* MDC = 2.5 MHz */
+#define MDC_CLK 2500000
+
+static int mii_probe(struct net_device *dev, int phy_mode)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ unsigned short sysctl;
+ int i;
+ u32 sclk, mdc_div;
+
+ /* Enable PHY output early */
+ if (!(bfin_read_VR_CTL() & CLKBUFOE))
+ bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
+
+ sclk = get_sclk();
+ mdc_div = ((sclk / MDC_CLK) / 2) - 1;
+
+ sysctl = bfin_read_EMAC_SYSCTL();
+ sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
+ bfin_write_EMAC_SYSCTL(sysctl);
+
+ /* search for connected PHY device */
+ for (i = 0; i < PHY_MAX_ADDR; ++i) {
+ struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
+
+ if (!tmp_phydev)
+ continue; /* no PHY here... */
+
+ phydev = tmp_phydev;
+ break; /* found it */
+ }
+
+ /* now we are supposed to have a proper phydev, to attach to... */
+ if (!phydev) {
+ netdev_err(dev, "no phy device found\n");
+ return -ENODEV;
+ }
+
+ if (phy_mode != PHY_INTERFACE_MODE_RMII &&
+ phy_mode != PHY_INTERFACE_MODE_MII) {
+ netdev_err(dev, "invalid phy interface mode\n");
+ return -EINVAL;
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
+ 0, phy_mode);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "could not attach PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_Pause | SUPPORTED_Asym_Pause
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+
+ phydev->advertising = phydev->supported;
+
+ lp->old_link = 0;
+ lp->old_speed = 0;
+ lp->old_duplex = -1;
+ lp->phydev = phydev;
+
+ pr_info("attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
+ MDC_CLK, mdc_div, sclk/1000000);
+
+ return 0;
+}
+
+/*
+ * Ethtool support
+ */
+
+/*
+ * interrupt routine for magic packet wakeup
+ */
+static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static int
+bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+
+ if (lp->phydev)
+ return phy_ethtool_gset(lp->phydev, cmd);
+
+ return -EINVAL;
+}
+
+static int
+bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (lp->phydev)
+ return phy_ethtool_sset(lp->phydev, cmd);
+
+ return -EINVAL;
+}
+
+static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, KBUILD_MODNAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, dev_name(&dev->dev));
+}
+
+static void bfin_mac_ethtool_getwol(struct net_device *dev,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+
+ wolinfo->supported = WAKE_MAGIC;
+ wolinfo->wolopts = lp->wol;
+}
+
+static int bfin_mac_ethtool_setwol(struct net_device *dev,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ int rc;
+
+ if (wolinfo->wolopts & (WAKE_MAGICSECURE |
+ WAKE_UCAST |
+ WAKE_MCAST |
+ WAKE_BCAST |
+ WAKE_ARP))
+ return -EOPNOTSUPP;
+
+ lp->wol = wolinfo->wolopts;
+
+ if (lp->wol && !lp->irq_wake_requested) {
+ /* register wake irq handler */
+ rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt,
+ IRQF_DISABLED, "EMAC_WAKE", dev);
+ if (rc)
+ return rc;
+ lp->irq_wake_requested = true;
+ }
+
+ if (!lp->wol && lp->irq_wake_requested) {
+ free_irq(IRQ_MAC_WAKEDET, dev);
+ lp->irq_wake_requested = false;
+ }
+
+ /* Make sure the PHY driver doesn't suspend */
+ device_init_wakeup(&dev->dev, lp->wol);
+
+ return 0;
+}
+
+static const struct ethtool_ops bfin_mac_ethtool_ops = {
+ .get_settings = bfin_mac_ethtool_getsettings,
+ .set_settings = bfin_mac_ethtool_setsettings,
+ .get_link = ethtool_op_get_link,
+ .get_drvinfo = bfin_mac_ethtool_getdrvinfo,
+ .get_wol = bfin_mac_ethtool_getwol,
+ .set_wol = bfin_mac_ethtool_setwol,
+};
+
+/**************************************************************************/
+static void setup_system_regs(struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ int i;
+ unsigned short sysctl;
+
+ /*
+ * Odd word alignment for Receive Frame DMA word
+ * Configure checksum support and rcve frame word alignment
+ */
+ sysctl = bfin_read_EMAC_SYSCTL();
+ /*
+ * check if interrupt is requested for any PHY,
+ * enable PHY interrupt only if needed
+ */
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ if (lp->mii_bus->irq[i] != PHY_POLL)
+ break;
+ if (i < PHY_MAX_ADDR)
+ sysctl |= PHYIE;
+ sysctl |= RXDWA;
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+ sysctl |= RXCKS;
+#else
+ sysctl &= ~RXCKS;
+#endif
+ bfin_write_EMAC_SYSCTL(sysctl);
+
+ bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
+
+ /* Set vlan regs to let 1522 bytes long packets pass through */
+ bfin_write_EMAC_VLAN1(lp->vlan1_mask);
+ bfin_write_EMAC_VLAN2(lp->vlan2_mask);
+
+ /* Initialize the TX DMA channel registers */
+ bfin_write_DMA2_X_COUNT(0);
+ bfin_write_DMA2_X_MODIFY(4);
+ bfin_write_DMA2_Y_COUNT(0);
+ bfin_write_DMA2_Y_MODIFY(0);
+
+ /* Initialize the RX DMA channel registers */
+ bfin_write_DMA1_X_COUNT(0);
+ bfin_write_DMA1_X_MODIFY(4);
+ bfin_write_DMA1_Y_COUNT(0);
+ bfin_write_DMA1_Y_MODIFY(0);
+}
+
+static void setup_mac_addr(u8 *mac_addr)
+{
+ u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]);
+ u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]);
+
+ /* this depends on a little-endian machine */
+ bfin_write_EMAC_ADDRLO(addr_low);
+ bfin_write_EMAC_ADDRHI(addr_hi);
+}
+
+static int bfin_mac_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+ if (netif_running(dev))
+ return -EBUSY;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ setup_mac_addr(dev->dev_addr);
+ return 0;
+}
+
+#ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
+#define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE)
+
+static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev,
+ struct ifreq *ifr, int cmd)
+{
+ struct hwtstamp_config config;
+ struct bfin_mac_local *lp = netdev_priv(netdev);
+ u16 ptpctl;
+ u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
+ __func__, config.flags, config.tx_type, config.rx_filter);
+
+ /* reserved for future extensions */
+ if (config.flags)
+ return -EINVAL;
+
+ if ((config.tx_type != HWTSTAMP_TX_OFF) &&
+ (config.tx_type != HWTSTAMP_TX_ON))
+ return -ERANGE;
+
+ ptpctl = bfin_read_EMAC_PTP_CTL();
+
+ switch (config.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ /*
+ * Dont allow any timestamping
+ */
+ ptpfv3 = 0xFFFFFFFF;
+ bfin_write_EMAC_PTP_FV3(ptpfv3);
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ /*
+ * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL)
+ * to enable all the field matches.
+ */
+ ptpctl &= ~0x1F00;
+ bfin_write_EMAC_PTP_CTL(ptpctl);
+ /*
+ * Keep the default values of the EMAC_PTP_FOFF register.
+ */
+ ptpfoff = 0x4A24170C;
+ bfin_write_EMAC_PTP_FOFF(ptpfoff);
+ /*
+ * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
+ * registers.
+ */
+ ptpfv1 = 0x11040800;
+ bfin_write_EMAC_PTP_FV1(ptpfv1);
+ ptpfv2 = 0x0140013F;
+ bfin_write_EMAC_PTP_FV2(ptpfv2);
+ /*
+ * The default value (0xFFFC) allows the timestamping of both
+ * received Sync messages and Delay_Req messages.
+ */
+ ptpfv3 = 0xFFFFFFFC;
+ bfin_write_EMAC_PTP_FV3(ptpfv3);
+
+ config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ /* Clear all five comparison mask bits (bits[12:8]) in the
+ * EMAC_PTP_CTL register to enable all the field matches.
+ */
+ ptpctl &= ~0x1F00;
+ bfin_write_EMAC_PTP_CTL(ptpctl);
+ /*
+ * Keep the default values of the EMAC_PTP_FOFF register, except set
+ * the PTPCOF field to 0x2A.
+ */
+ ptpfoff = 0x2A24170C;
+ bfin_write_EMAC_PTP_FOFF(ptpfoff);
+ /*
+ * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
+ * registers.
+ */
+ ptpfv1 = 0x11040800;
+ bfin_write_EMAC_PTP_FV1(ptpfv1);
+ ptpfv2 = 0x0140013F;
+ bfin_write_EMAC_PTP_FV2(ptpfv2);
+ /*
+ * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set
+ * the value to 0xFFF0.
+ */
+ ptpfv3 = 0xFFFFFFF0;
+ bfin_write_EMAC_PTP_FV3(ptpfv3);
+
+ config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ /*
+ * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the
+ * EFTM and PTPCM field comparison.
+ */
+ ptpctl &= ~0x1100;
+ bfin_write_EMAC_PTP_CTL(ptpctl);
+ /*
+ * Keep the default values of all the fields of the EMAC_PTP_FOFF
+ * register, except set the PTPCOF field to 0x0E.
+ */
+ ptpfoff = 0x0E24170C;
+ bfin_write_EMAC_PTP_FOFF(ptpfoff);
+ /*
+ * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which
+ * corresponds to PTP messages on the MAC layer.
+ */
+ ptpfv1 = 0x110488F7;
+ bfin_write_EMAC_PTP_FV1(ptpfv1);
+ ptpfv2 = 0x0140013F;
+ bfin_write_EMAC_PTP_FV2(ptpfv2);
+ /*
+ * To allow the timestamping of Pdelay_Req and Pdelay_Resp
+ * messages, set the value to 0xFFF0.
+ */
+ ptpfv3 = 0xFFFFFFF0;
+ bfin_write_EMAC_PTP_FV3(ptpfv3);
+
+ config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ if (config.tx_type == HWTSTAMP_TX_OFF &&
+ bfin_mac_hwtstamp_is_none(config.rx_filter)) {
+ ptpctl &= ~PTP_EN;
+ bfin_write_EMAC_PTP_CTL(ptpctl);
+
+ SSYNC();
+ } else {
+ ptpctl |= PTP_EN;
+ bfin_write_EMAC_PTP_CTL(ptpctl);
+
+ /*
+ * clear any existing timestamp
+ */
+ bfin_read_EMAC_PTP_RXSNAPLO();
+ bfin_read_EMAC_PTP_RXSNAPHI();
+
+ bfin_read_EMAC_PTP_TXSNAPLO();
+ bfin_read_EMAC_PTP_TXSNAPHI();
+
+ /*
+ * Set registers so that rollover occurs soon to test this.
+ */
+ bfin_write_EMAC_PTP_TIMELO(0x00000000);
+ bfin_write_EMAC_PTP_TIMEHI(0xFF800000);
+
+ SSYNC();
+
+ lp->compare.last_update = 0;
+ timecounter_init(&lp->clock,
+ &lp->cycles,
+ ktime_to_ns(ktime_get_real()));
+ timecompare_update(&lp->compare, 0);
+ }
+
+ lp->stamp_cfg = config;
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp)
+{
+ ktime_t sys = ktime_get_real();
+
+ pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n",
+ __func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec,
+ sys.tv.nsec, cmp->offset, cmp->skew);
+}
+
+static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
+{
+ struct bfin_mac_local *lp = netdev_priv(netdev);
+
+ if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
+ int timeout_cnt = MAX_TIMEOUT_CNT;
+
+ /* When doing time stamping, keep the connection to the socket
+ * a while longer
+ */
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+
+ /*
+ * The timestamping is done at the EMAC module's MII/RMII interface
+ * when the module sees the Start of Frame of an event message packet. This
+ * interface is the closest possible place to the physical Ethernet transmission
+ * medium, providing the best timing accuracy.
+ */
+ while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
+ udelay(1);
+ if (timeout_cnt == 0)
+ netdev_err(netdev, "timestamp the TX packet failed\n");
+ else {
+ struct skb_shared_hwtstamps shhwtstamps;
+ u64 ns;
+ u64 regval;
+
+ regval = bfin_read_EMAC_PTP_TXSNAPLO();
+ regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32;
+ memset(&shhwtstamps, 0, sizeof(shhwtstamps));
+ ns = timecounter_cyc2time(&lp->clock,
+ regval);
+ timecompare_update(&lp->compare, ns);
+ shhwtstamps.hwtstamp = ns_to_ktime(ns);
+ shhwtstamps.syststamp =
+ timecompare_transform(&lp->compare, ns);
+ skb_tstamp_tx(skb, &shhwtstamps);
+
+ bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare);
+ }
+ }
+}
+
+static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
+{
+ struct bfin_mac_local *lp = netdev_priv(netdev);
+ u32 valid;
+ u64 regval, ns;
+ struct skb_shared_hwtstamps *shhwtstamps;
+
+ if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter))
+ return;
+
+ valid = bfin_read_EMAC_PTP_ISTAT() & RXEL;
+ if (!valid)
+ return;
+
+ shhwtstamps = skb_hwtstamps(skb);
+
+ regval = bfin_read_EMAC_PTP_RXSNAPLO();
+ regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32;
+ ns = timecounter_cyc2time(&lp->clock, regval);
+ timecompare_update(&lp->compare, ns);
+ memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+ shhwtstamps->hwtstamp = ns_to_ktime(ns);
+ shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns);
+
+ bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare);
+}
+
+/*
+ * bfin_read_clock - read raw cycle counter (to be used by time counter)
+ */
+static cycle_t bfin_read_clock(const struct cyclecounter *tc)
+{
+ u64 stamp;
+
+ stamp = bfin_read_EMAC_PTP_TIMELO();
+ stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL;
+
+ return stamp;
+}
+
+#define PTP_CLK 25000000
+
+static void bfin_mac_hwtstamp_init(struct net_device *netdev)
+{
+ struct bfin_mac_local *lp = netdev_priv(netdev);
+ u64 append;
+
+ /* Initialize hardware timer */
+ append = PTP_CLK * (1ULL << 32);
+ do_div(append, get_sclk());
+ bfin_write_EMAC_PTP_ADDEND((u32)append);
+
+ memset(&lp->cycles, 0, sizeof(lp->cycles));
+ lp->cycles.read = bfin_read_clock;
+ lp->cycles.mask = CLOCKSOURCE_MASK(64);
+ lp->cycles.mult = 1000000000 / PTP_CLK;
+ lp->cycles.shift = 0;
+
+ /* Synchronize our NIC clock against system wall clock */
+ memset(&lp->compare, 0, sizeof(lp->compare));
+ lp->compare.source = &lp->clock;
+ lp->compare.target = ktime_get_real;
+ lp->compare.num_samples = 10;
+
+ /* Initialize hwstamp config */
+ lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
+ lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
+}
+
+#else
+# define bfin_mac_hwtstamp_is_none(cfg) 0
+# define bfin_mac_hwtstamp_init(dev)
+# define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP)
+# define bfin_rx_hwtstamp(dev, skb)
+# define bfin_tx_hwtstamp(dev, skb)
+#endif
+
+static inline void _tx_reclaim_skb(void)
+{
+ do {
+ tx_list_head->desc_a.config &= ~DMAEN;
+ tx_list_head->status.status_word = 0;
+ if (tx_list_head->skb) {
+ dev_kfree_skb(tx_list_head->skb);
+ tx_list_head->skb = NULL;
+ }
+ tx_list_head = tx_list_head->next;
+
+ } while (tx_list_head->status.status_word != 0);
+}
+
+static void tx_reclaim_skb(struct bfin_mac_local *lp)
+{
+ int timeout_cnt = MAX_TIMEOUT_CNT;
+
+ if (tx_list_head->status.status_word != 0)
+ _tx_reclaim_skb();
+
+ if (current_tx_ptr->next == tx_list_head) {
+ while (tx_list_head->status.status_word == 0) {
+ /* slow down polling to avoid too many queue stop. */
+ udelay(10);
+ /* reclaim skb if DMA is not running. */
+ if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN))
+ break;
+ if (timeout_cnt-- < 0)
+ break;
+ }
+
+ if (timeout_cnt >= 0)
+ _tx_reclaim_skb();
+ else
+ netif_stop_queue(lp->ndev);
+ }
+
+ if (current_tx_ptr->next != tx_list_head &&
+ netif_queue_stopped(lp->ndev))
+ netif_wake_queue(lp->ndev);
+
+ if (tx_list_head != current_tx_ptr) {
+ /* shorten the timer interval if tx queue is stopped */
+ if (netif_queue_stopped(lp->ndev))
+ lp->tx_reclaim_timer.expires =
+ jiffies + (TX_RECLAIM_JIFFIES >> 4);
+ else
+ lp->tx_reclaim_timer.expires =
+ jiffies + TX_RECLAIM_JIFFIES;
+
+ mod_timer(&lp->tx_reclaim_timer,
+ lp->tx_reclaim_timer.expires);
+ }
+
+ return;
+}
+
+static void tx_reclaim_skb_timeout(unsigned long lp)
+{
+ tx_reclaim_skb((struct bfin_mac_local *)lp);
+}
+
+static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ u16 *data;
+ u32 data_align = (unsigned long)(skb->data) & 0x3;
+
+ current_tx_ptr->skb = skb;
+
+ if (data_align == 0x2) {
+ /* move skb->data to current_tx_ptr payload */
+ data = (u16 *)(skb->data) - 1;
+ *data = (u16)(skb->len);
+ /*
+ * When transmitting an Ethernet packet, the PTP_TSYNC module requires
+ * a DMA_Length_Word field associated with the packet. The lower 12 bits
+ * of this field are the length of the packet payload in bytes and the higher
+ * 4 bits are the timestamping enable field.
+ */
+ if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+ *data |= 0x1000;
+
+ current_tx_ptr->desc_a.start_addr = (u32)data;
+ /* this is important! */
+ blackfin_dcache_flush_range((u32)data,
+ (u32)((u8 *)data + skb->len + 4));
+ } else {
+ *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
+ /* enable timestamping for the sent packet */
+ if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+ *((u16 *)(current_tx_ptr->packet)) |= 0x1000;
+ memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
+ skb->len);
+ current_tx_ptr->desc_a.start_addr =
+ (u32)current_tx_ptr->packet;
+ blackfin_dcache_flush_range(
+ (u32)current_tx_ptr->packet,
+ (u32)(current_tx_ptr->packet + skb->len + 2));
+ }
+
+ /* make sure the internal data buffers in the core are drained
+ * so that the DMA descriptors are completely written when the
+ * DMA engine goes to fetch them below
+ */
+ SSYNC();
+
+ /* always clear status buffer before start tx dma */
+ current_tx_ptr->status.status_word = 0;
+
+ /* enable this packet's dma */
+ current_tx_ptr->desc_a.config |= DMAEN;
+
+ /* tx dma is running, just return */
+ if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
+ goto out;
+
+ /* tx dma is not running */
+ bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a));
+ /* dma enabled, read from memory, size is 6 */
+ bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config);
+ /* Turn on the EMAC tx */
+ bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
+
+out:
+ bfin_tx_hwtstamp(dev, skb);
+
+ current_tx_ptr = current_tx_ptr->next;
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += (skb->len);
+
+ tx_reclaim_skb(lp);
+
+ return NETDEV_TX_OK;
+}
+
+#define IP_HEADER_OFF 0
+#define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \
+ RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE)
+
+static void bfin_mac_rx(struct net_device *dev)
+{
+ struct sk_buff *skb, *new_skb;
+ unsigned short len;
+ struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev);
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+ unsigned int i;
+ unsigned char fcs[ETH_FCS_LEN + 1];
+#endif
+
+ /* check if frame status word reports an error condition
+ * we which case we simply drop the packet
+ */
+ if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
+ netdev_notice(dev, "rx: receive error - packet dropped\n");
+ dev->stats.rx_dropped++;
+ goto out;
+ }
+
+ /* allocate a new skb for next time receive */
+ skb = current_rx_ptr->skb;
+
+ new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
+ if (!new_skb) {
+ netdev_notice(dev, "rx: low on mem - packet dropped\n");
+ dev->stats.rx_dropped++;
+ goto out;
+ }
+ /* reserve 2 bytes for RXDWA padding */
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ /* Invidate the data cache of skb->data range when it is write back
+ * cache. It will prevent overwritting the new data from DMA
+ */
+ blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+ (unsigned long)new_skb->end);
+
+ current_rx_ptr->skb = new_skb;
+ current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
+
+ len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
+ /* Deduce Ethernet FCS length from Ethernet payload length */
+ len -= ETH_FCS_LEN;
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ bfin_rx_hwtstamp(dev, skb);
+
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+ /* Checksum offloading only works for IPv4 packets with the standard IP header
+ * length of 20 bytes, because the blackfin MAC checksum calculation is
+ * based on that assumption. We must NOT use the calculated checksum if our
+ * IP version or header break that assumption.
+ */
+ if (skb->data[IP_HEADER_OFF] == 0x45) {
+ skb->csum = current_rx_ptr->status.ip_payload_csum;
+ /*
+ * Deduce Ethernet FCS from hardware generated IP payload checksum.
+ * IP checksum is based on 16-bit one's complement algorithm.
+ * To deduce a value from checksum is equal to add its inversion.
+ * If the IP payload len is odd, the inversed FCS should also
+ * begin from odd address and leave first byte zero.
+ */
+ if (skb->len % 2) {
+ fcs[0] = 0;
+ for (i = 0; i < ETH_FCS_LEN; i++)
+ fcs[i + 1] = ~skb->data[skb->len + i];
+ skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum);
+ } else {
+ for (i = 0; i < ETH_FCS_LEN; i++)
+ fcs[i] = ~skb->data[skb->len + i];
+ skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum);
+ }
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+#endif
+
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+out:
+ current_rx_ptr->status.status_word = 0x00000000;
+ current_rx_ptr = current_rx_ptr->next;
+}
+
+/* interrupt routine to handle rx and error signal */
+static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ int number = 0;
+
+get_one_packet:
+ if (current_rx_ptr->status.status_word == 0) {
+ /* no more new packet received */
+ if (number == 0) {
+ if (current_rx_ptr->next->status.status_word != 0) {
+ current_rx_ptr = current_rx_ptr->next;
+ goto real_rx;
+ }
+ }
+ bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() |
+ DMA_DONE | DMA_ERR);
+ return IRQ_HANDLED;
+ }
+
+real_rx:
+ bfin_mac_rx(dev);
+ number++;
+ goto get_one_packet;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void bfin_mac_poll(struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+
+ disable_irq(IRQ_MAC_RX);
+ bfin_mac_interrupt(IRQ_MAC_RX, dev);
+ tx_reclaim_skb(lp);
+ enable_irq(IRQ_MAC_RX);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+static void bfin_mac_disable(void)
+{
+ unsigned int opmode;
+
+ opmode = bfin_read_EMAC_OPMODE();
+ opmode &= (~RE);
+ opmode &= (~TE);
+ /* Turn off the EMAC */
+ bfin_write_EMAC_OPMODE(opmode);
+}
+
+/*
+ * Enable Interrupts, Receive, and Transmit
+ */
+static int bfin_mac_enable(struct phy_device *phydev)
+{
+ int ret;
+ u32 opmode;
+
+ pr_debug("%s\n", __func__);
+
+ /* Set RX DMA */
+ bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
+ bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
+
+ /* Wait MII done */
+ ret = bfin_mdio_poll();
+ if (ret)
+ return ret;
+
+ /* We enable only RX here */
+ /* ASTP : Enable Automatic Pad Stripping
+ PR : Promiscuous Mode for test
+ PSF : Receive frames with total length less than 64 bytes.
+ FDMODE : Full Duplex Mode
+ LB : Internal Loopback for test
+ RE : Receiver Enable */
+ opmode = bfin_read_EMAC_OPMODE();
+ if (opmode & FDMODE)
+ opmode |= PSF;
+ else
+ opmode |= DRO | DC | PSF;
+ opmode |= RE;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+ opmode |= RMII; /* For Now only 100MBit are supported */
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+ if (__SILICON_REVISION__ < 3) {
+ /*
+ * This isn't publicly documented (fun times!), but in
+ * silicon <=0.2, the RX and TX pins are clocked together.
+ * So in order to recv, we must enable the transmit side
+ * as well. This will cause a spurious TX interrupt too,
+ * but we can easily consume that.
+ */
+ opmode |= TE;
+ }
+#endif
+ }
+
+ /* Turn on the EMAC rx */
+ bfin_write_EMAC_OPMODE(opmode);
+
+ return 0;
+}
+
+/* Our watchdog timed out. Called by the networking layer */
+static void bfin_mac_timeout(struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+
+ pr_debug("%s: %s\n", dev->name, __func__);
+
+ bfin_mac_disable();
+
+ del_timer(&lp->tx_reclaim_timer);
+
+ /* reset tx queue and free skb */
+ while (tx_list_head != current_tx_ptr) {
+ tx_list_head->desc_a.config &= ~DMAEN;
+ tx_list_head->status.status_word = 0;
+ if (tx_list_head->skb) {
+ dev_kfree_skb(tx_list_head->skb);
+ tx_list_head->skb = NULL;
+ }
+ tx_list_head = tx_list_head->next;
+ }
+
+ if (netif_queue_stopped(lp->ndev))
+ netif_wake_queue(lp->ndev);
+
+ bfin_mac_enable(lp->phydev);
+
+ /* We can accept TX packets again */
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_wake_queue(dev);
+}
+
+static void bfin_mac_multicast_hash(struct net_device *dev)
+{
+ u32 emac_hashhi, emac_hashlo;
+ struct netdev_hw_addr *ha;
+ u32 crc;
+
+ emac_hashhi = emac_hashlo = 0;
+
+ netdev_for_each_mc_addr(ha, dev) {
+ crc = ether_crc(ETH_ALEN, ha->addr);
+ crc >>= 26;
+
+ if (crc & 0x20)
+ emac_hashhi |= 1 << (crc & 0x1f);
+ else
+ emac_hashlo |= 1 << (crc & 0x1f);
+ }
+
+ bfin_write_EMAC_HASHHI(emac_hashhi);
+ bfin_write_EMAC_HASHLO(emac_hashlo);
+}
+
+/*
+ * This routine will, depending on the values passed to it,
+ * either make it accept multicast packets, go into
+ * promiscuous mode (for TCPDUMP and cousins) or accept
+ * a select set of multicast packets
+ */
+static void bfin_mac_set_multicast_list(struct net_device *dev)
+{
+ u32 sysctl;
+
+ if (dev->flags & IFF_PROMISC) {
+ netdev_info(dev, "set promisc mode\n");
+ sysctl = bfin_read_EMAC_OPMODE();
+ sysctl |= PR;
+ bfin_write_EMAC_OPMODE(sysctl);
+ } else if (dev->flags & IFF_ALLMULTI) {
+ /* accept all multicast */
+ sysctl = bfin_read_EMAC_OPMODE();
+ sysctl |= PAM;
+ bfin_write_EMAC_OPMODE(sysctl);
+ } else if (!netdev_mc_empty(dev)) {
+ /* set up multicast hash table */
+ sysctl = bfin_read_EMAC_OPMODE();
+ sysctl |= HM;
+ bfin_write_EMAC_OPMODE(sysctl);
+ bfin_mac_multicast_hash(dev);
+ } else {
+ /* clear promisc or multicast mode */
+ sysctl = bfin_read_EMAC_OPMODE();
+ sysctl &= ~(RAF | PAM);
+ bfin_write_EMAC_OPMODE(sysctl);
+ }
+}
+
+static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct bfin_mac_local *lp = netdev_priv(netdev);
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ switch (cmd) {
+ case SIOCSHWTSTAMP:
+ return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
+ default:
+ if (lp->phydev)
+ return phy_mii_ioctl(lp->phydev, ifr, cmd);
+ else
+ return -EOPNOTSUPP;
+ }
+}
+
+/*
+ * this puts the device in an inactive state
+ */
+static void bfin_mac_shutdown(struct net_device *dev)
+{
+ /* Turn off the EMAC */
+ bfin_write_EMAC_OPMODE(0x00000000);
+ /* Turn off the EMAC RX DMA */
+ bfin_write_DMA1_CONFIG(0x0000);
+ bfin_write_DMA2_CONFIG(0x0000);
+}
+
+/*
+ * Open and Initialize the interface
+ *
+ * Set up everything, reset the card, etc..
+ */
+static int bfin_mac_open(struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ int ret;
+ pr_debug("%s: %s\n", dev->name, __func__);
+
+ /*
+ * Check that the address is valid. If its not, refuse
+ * to bring the device up. The user must specify an
+ * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
+ */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ netdev_warn(dev, "no valid ethernet hw addr\n");
+ return -EINVAL;
+ }
+
+ /* initial rx and tx list */
+ ret = desc_list_init();
+ if (ret)
+ return ret;
+
+ phy_start(lp->phydev);
+ phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
+ setup_system_regs(dev);
+ setup_mac_addr(dev->dev_addr);
+
+ bfin_mac_disable();
+ ret = bfin_mac_enable(lp->phydev);
+ if (ret)
+ return ret;
+ pr_debug("hardware init finished\n");
+
+ netif_start_queue(dev);
+ netif_carrier_on(dev);
+
+ return 0;
+}
+
+/*
+ * this makes the board clean up everything that it can
+ * and not talk to the outside world. Caused by
+ * an 'ifconfig ethX down'
+ */
+static int bfin_mac_close(struct net_device *dev)
+{
+ struct bfin_mac_local *lp = netdev_priv(dev);
+ pr_debug("%s: %s\n", dev->name, __func__);
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+
+ phy_stop(lp->phydev);
+ phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
+
+ /* clear everything */
+ bfin_mac_shutdown(dev);
+
+ /* free the rx/tx buffers */
+ desc_list_free();
+
+ return 0;
+}
+
+static const struct net_device_ops bfin_mac_netdev_ops = {
+ .ndo_open = bfin_mac_open,
+ .ndo_stop = bfin_mac_close,
+ .ndo_start_xmit = bfin_mac_hard_start_xmit,
+ .ndo_set_mac_address = bfin_mac_set_mac_address,
+ .ndo_tx_timeout = bfin_mac_timeout,
+ .ndo_set_multicast_list = bfin_mac_set_multicast_list,
+ .ndo_do_ioctl = bfin_mac_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = bfin_mac_poll,
+#endif
+};
+
+static int __devinit bfin_mac_probe(struct platform_device *pdev)
+{
+ struct net_device *ndev;
+ struct bfin_mac_local *lp;
+ struct platform_device *pd;
+ struct bfin_mii_bus_platform_data *mii_bus_data;
+ int rc;
+
+ ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
+ if (!ndev) {
+ dev_err(&pdev->dev, "Cannot allocate net device!\n");
+ return -ENOMEM;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+ platform_set_drvdata(pdev, ndev);
+ lp = netdev_priv(ndev);
+ lp->ndev = ndev;
+
+ /* Grab the MAC address in the MAC */
+ *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO());
+ *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI());
+
+ /* probe mac */
+ /*todo: how to proble? which is revision_register */
+ bfin_write_EMAC_ADDRLO(0x12345678);
+ if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
+ dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n");
+ rc = -ENODEV;
+ goto out_err_probe_mac;
+ }
+
+
+ /*
+ * Is it valid? (Did bootloader initialize it?)
+ * Grab the MAC from the board somehow
+ * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c
+ */
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ bfin_get_ether_addr(ndev->dev_addr);
+
+ /* If still not valid, get a random one */
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ random_ether_addr(ndev->dev_addr);
+
+ setup_mac_addr(ndev->dev_addr);
+
+ if (!pdev->dev.platform_data) {
+ dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
+ rc = -ENODEV;
+ goto out_err_probe_mac;
+ }
+ pd = pdev->dev.platform_data;
+ lp->mii_bus = platform_get_drvdata(pd);
+ if (!lp->mii_bus) {
+ dev_err(&pdev->dev, "Cannot get mii_bus!\n");
+ rc = -ENODEV;
+ goto out_err_probe_mac;
+ }
+ lp->mii_bus->priv = ndev;
+ mii_bus_data = pd->dev.platform_data;
+
+ rc = mii_probe(ndev, mii_bus_data->phy_mode);
+ if (rc) {
+ dev_err(&pdev->dev, "MII Probe failed!\n");
+ goto out_err_mii_probe;
+ }
+
+ lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
+ lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
+
+ /* Fill in the fields of the device structure with ethernet values. */
+ ether_setup(ndev);
+
+ ndev->netdev_ops = &bfin_mac_netdev_ops;
+ ndev->ethtool_ops = &bfin_mac_ethtool_ops;
+
+ init_timer(&lp->tx_reclaim_timer);
+ lp->tx_reclaim_timer.data = (unsigned long)lp;
+ lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
+
+ spin_lock_init(&lp->lock);
+
+ /* now, enable interrupts */
+ /* register irq handler */
+ rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
+ IRQF_DISABLED, "EMAC_RX", ndev);
+ if (rc) {
+ dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
+ rc = -EBUSY;
+ goto out_err_request_irq;
+ }
+
+ rc = register_netdev(ndev);
+ if (rc) {
+ dev_err(&pdev->dev, "Cannot register net device!\n");
+ goto out_err_reg_ndev;
+ }
+
+ bfin_mac_hwtstamp_init(ndev);
+
+ /* now, print out the card info, in a short format.. */
+ netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
+
+ return 0;
+
+out_err_reg_ndev:
+ free_irq(IRQ_MAC_RX, ndev);
+out_err_request_irq:
+out_err_mii_probe:
+ mdiobus_unregister(lp->mii_bus);
+ mdiobus_free(lp->mii_bus);
+out_err_probe_mac:
+ platform_set_drvdata(pdev, NULL);
+ free_netdev(ndev);
+
+ return rc;
+}
+
+static int __devexit bfin_mac_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct bfin_mac_local *lp = netdev_priv(ndev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ lp->mii_bus->priv = NULL;
+
+ unregister_netdev(ndev);
+
+ free_irq(IRQ_MAC_RX, ndev);
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct net_device *net_dev = platform_get_drvdata(pdev);
+ struct bfin_mac_local *lp = netdev_priv(net_dev);
+
+ if (lp->wol) {
+ bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE);
+ bfin_write_EMAC_WKUP_CTL(MPKE);
+ enable_irq_wake(IRQ_MAC_WAKEDET);
+ } else {
+ if (netif_running(net_dev))
+ bfin_mac_close(net_dev);
+ }
+
+ return 0;
+}
+
+static int bfin_mac_resume(struct platform_device *pdev)
+{
+ struct net_device *net_dev = platform_get_drvdata(pdev);
+ struct bfin_mac_local *lp = netdev_priv(net_dev);
+
+ if (lp->wol) {
+ bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
+ bfin_write_EMAC_WKUP_CTL(0);
+ disable_irq_wake(IRQ_MAC_WAKEDET);
+ } else {
+ if (netif_running(net_dev))
+ bfin_mac_open(net_dev);
+ }
+
+ return 0;
+}
+#else
+#define bfin_mac_suspend NULL
+#define bfin_mac_resume NULL
+#endif /* CONFIG_PM */
+
+static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
+{
+ struct mii_bus *miibus;
+ struct bfin_mii_bus_platform_data *mii_bus_pd;
+ const unsigned short *pin_req;
+ int rc, i;
+
+ mii_bus_pd = dev_get_platdata(&pdev->dev);
+ if (!mii_bus_pd) {
+ dev_err(&pdev->dev, "No peripherals in platform data!\n");
+ return -EINVAL;
+ }
+
+ /*
+ * We are setting up a network card,
+ * so set the GPIO pins to Ethernet mode
+ */
+ pin_req = mii_bus_pd->mac_peripherals;
+ rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
+ if (rc) {
+ dev_err(&pdev->dev, "Requesting peripherals failed!\n");
+ return rc;
+ }
+
+ rc = -ENOMEM;
+ miibus = mdiobus_alloc();
+ if (miibus == NULL)
+ goto out_err_alloc;
+ miibus->read = bfin_mdiobus_read;
+ miibus->write = bfin_mdiobus_write;
+ miibus->reset = bfin_mdiobus_reset;
+
+ miibus->parent = &pdev->dev;
+ miibus->name = "bfin_mii_bus";
+ miibus->phy_mask = mii_bus_pd->phy_mask;
+
+ snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
+ miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ if (!miibus->irq)
+ goto out_err_irq_alloc;
+
+ for (i = rc; i < PHY_MAX_ADDR; ++i)
+ miibus->irq[i] = PHY_POLL;
+
+ rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
+ if (rc != mii_bus_pd->phydev_number)
+ dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
+ mii_bus_pd->phydev_number);
+ for (i = 0; i < rc; ++i) {
+ unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
+ if (phyaddr < PHY_MAX_ADDR)
+ miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
+ else
+ dev_err(&pdev->dev,
+ "Invalid PHY address %i for phydev %i\n",
+ phyaddr, i);
+ }
+
+ rc = mdiobus_register(miibus);
+ if (rc) {
+ dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+ goto out_err_mdiobus_register;
+ }
+
+ platform_set_drvdata(pdev, miibus);
+ return 0;
+
+out_err_mdiobus_register:
+ kfree(miibus->irq);
+out_err_irq_alloc:
+ mdiobus_free(miibus);
+out_err_alloc:
+ peripheral_free_list(pin_req);
+
+ return rc;
+}
+
+static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
+{
+ struct mii_bus *miibus = platform_get_drvdata(pdev);
+ struct bfin_mii_bus_platform_data *mii_bus_pd =
+ dev_get_platdata(&pdev->dev);
+
+ platform_set_drvdata(pdev, NULL);
+ mdiobus_unregister(miibus);
+ kfree(miibus->irq);
+ mdiobus_free(miibus);
+ peripheral_free_list(mii_bus_pd->mac_peripherals);
+
+ return 0;
+}
+
+static struct platform_driver bfin_mii_bus_driver = {
+ .probe = bfin_mii_bus_probe,
+ .remove = __devexit_p(bfin_mii_bus_remove),
+ .driver = {
+ .name = "bfin_mii_bus",
+ .owner = THIS_MODULE,
+ },
+};
+
+static struct platform_driver bfin_mac_driver = {
+ .probe = bfin_mac_probe,
+ .remove = __devexit_p(bfin_mac_remove),
+ .resume = bfin_mac_resume,
+ .suspend = bfin_mac_suspend,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bfin_mac_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&bfin_mii_bus_driver);
+ if (!ret)
+ return platform_driver_register(&bfin_mac_driver);
+ return -ENODEV;
+}
+
+module_init(bfin_mac_init);
+
+static void __exit bfin_mac_cleanup(void)
+{
+ platform_driver_unregister(&bfin_mac_driver);
+ platform_driver_unregister(&bfin_mii_bus_driver);
+}
+
+module_exit(bfin_mac_cleanup);
+
--- /dev/null
+/*
+ * Blackfin On-Chip MAC Driver
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef _BFIN_MAC_H_
+#define _BFIN_MAC_H_
+
+#include <linux/net_tstamp.h>
+#include <linux/clocksource.h>
+#include <linux/timecompare.h>
+#include <linux/timer.h>
+#include <linux/etherdevice.h>
+#include <linux/bfin_mac.h>
+
+/*
+ * Disable hardware checksum for bug #5600 if writeback cache is
+ * enabled. Otherwize, corrupted RX packet will be sent up stack
+ * without error mark.
+ */
+#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
+#define BFIN_MAC_CSUM_OFFLOAD
+#endif
+
+#define TX_RECLAIM_JIFFIES (HZ / 5)
+
+struct dma_descriptor {
+ struct dma_descriptor *next_dma_desc;
+ unsigned long start_addr;
+ unsigned short config;
+ unsigned short x_count;
+};
+
+struct status_area_rx {
+#if defined(BFIN_MAC_CSUM_OFFLOAD)
+ unsigned short ip_hdr_csum; /* ip header checksum */
+ /* ip payload(udp or tcp or others) checksum */
+ unsigned short ip_payload_csum;
+#endif
+ unsigned long status_word; /* the frame status word */
+};
+
+struct status_area_tx {
+ unsigned long status_word; /* the frame status word */
+};
+
+/* use two descriptors for a packet */
+struct net_dma_desc_rx {
+ struct net_dma_desc_rx *next;
+ struct sk_buff *skb;
+ struct dma_descriptor desc_a;
+ struct dma_descriptor desc_b;
+ struct status_area_rx status;
+};
+
+/* use two descriptors for a packet */
+struct net_dma_desc_tx {
+ struct net_dma_desc_tx *next;
+ struct sk_buff *skb;
+ struct dma_descriptor desc_a;
+ struct dma_descriptor desc_b;
+ unsigned char packet[1560];
+ struct status_area_tx status;
+};
+
+struct bfin_mac_local {
+ /*
+ * these are things that the kernel wants me to keep, so users
+ * can find out semi-useless statistics of how well the card is
+ * performing
+ */
+ struct net_device_stats stats;
+
+ spinlock_t lock;
+
+ int wol; /* Wake On Lan */
+ int irq_wake_requested;
+ struct timer_list tx_reclaim_timer;
+ struct net_device *ndev;
+
+ /* Data for EMAC_VLAN1 regs */
+ u16 vlan1_mask, vlan2_mask;
+
+ /* MII and PHY stuffs */
+ int old_link; /* used by bf537_adjust_link */
+ int old_speed;
+ int old_duplex;
+
+ struct phy_device *phydev;
+ struct mii_bus *mii_bus;
+
+#if defined(CONFIG_BFIN_MAC_USE_HWSTAMP)
+ struct cyclecounter cycles;
+ struct timecounter clock;
+ struct timecompare compare;
+ struct hwtstamp_config stamp_cfg;
+#endif
+};
+
+extern void bfin_get_ether_addr(char *addr);
+
+#endif
projects / ~shefty / rdma-dev.git / commitdiff