]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
Bluetooth: Add AR30XX device ID on Asus laptops
authorKeng-Yu Lin <kengyu@canonical.com>
Wed, 30 Nov 2011 10:32:37 +0000 (18:32 +0800)
committerJohan Hedberg <johan.hedberg@intel.com>
Thu, 23 Feb 2012 11:06:57 +0000 (13:06 +0200)
The ID is found on Asus K54HR and K53U.
Blacklist the AR3011-based device ID [0489:e03d]
and add to ath3k.c for firmware loading.

Below is the output of usb-devices script:

Before the fiwmware loading:

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e03d Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

After the fiwmware loading:

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=3005 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
drivers/bluetooth/ath3k.c
drivers/bluetooth/btusb.c

index 07f14d10ea49ef33ed73d6d9c9b84b32093fb08b..4eca6e5cbf22daec5d7db9d2fcb984e89f11683b 100644 (file)
@@ -65,6 +65,7 @@ static struct usb_device_id ath3k_table[] = {
        { USB_DEVICE(0x0CF3, 0x3002) },
        { USB_DEVICE(0x13d3, 0x3304) },
        { USB_DEVICE(0x0930, 0x0215) },
+       { USB_DEVICE(0x0489, 0xE03D) },
 
        /* Atheros AR9285 Malbec with sflash firmware */
        { USB_DEVICE(0x03F0, 0x311D) },
index e61a195969bf9f43c4b14d73a0151d8d85ee8942..c5606ef917615e803bff809d15a714af508e2b99 100644 (file)
@@ -121,6 +121,7 @@ static struct usb_device_id blacklist_table[] = {
        { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
        { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
+       { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
 
        /* Atheros AR9285 Malbec with sflash firmware */
        { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },