--- /dev/null
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ };
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc1: esdhc@50004000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@50008000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ clocks = <&clks 32>, <&clks 33>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ clocks = <&clks 51>, <&clks 52>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks 49>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@50020000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc4: esdhc@50024000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+
+ usbotg: usb@53f80000 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ clocks = <&clks 124>;
+ status = "disabled";
+ };
+
+ usbh1: usb@53f80200 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ clocks = <&clks 125>;
+ status = "disabled";
+ };
+
+ usbh2: usb@53f80400 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ clocks = <&clks 108>;
+ status = "disabled";
+ };
+
+ usbh3: usb@53f80600 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ clocks = <&clks 108>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@53f84000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53f88000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@53f8c000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@53f90000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wdog1: wdog@53f98000 {
+ compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ clocks = <&clks 0>;
+ };
+
+ gpt: timer@53fa0000 {
+ compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+ reg = <0x53fa0000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks 36>, <&clks 41>;
+ clock-names = "ipg", "per";
+ };
+
+ iomuxc: iomuxc@53fa8000 {
+ compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@53fa8000 {
+ compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+ reg = <0x53fa8000 0xc>;
+ };
+
+ pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks 37>, <&clks 38>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@53fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb8000 0x4000>;
+ clocks = <&clks 39>, <&clks 40>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
+ uart1: serial@53fbc000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ clocks = <&clks 28>, <&clks 29>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@53fc0000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks 30>, <&clks 31>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ src: src@53fd0000 {
+ compatible = "fsl,imx50-src", "fsl,imx51-src";
+ reg = <0x53fd0000 0x4000>;
+ #reset-cells = <1>;
+ };
+
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx50-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
+ gpio5: gpio@53fdc000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@53fe0000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c3: i2c@53fec000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ clocks = <&clks 88>;
+ status = "disabled";
+ };
+
+ uart4: serial@53ff0000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks 65>, <&clks 66>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart5: serial@63f90000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ clocks = <&clks 67>, <&clks 68>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ owire: owire@63fa4000 {
+ compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+ reg = <0x63fa4000 0x4000>;
+ clocks = <&clks 159>;
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@63fac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ clocks = <&clks 53>, <&clks 54>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sdma: sdma@63fb0000 {
+ compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ clocks = <&clks 56>, <&clks 56>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+ };
+
+ cspi: cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ clocks = <&clks 55>, <&clks 55>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@63fc4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ clocks = <&clks 35>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@63fc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ clocks = <&clks 34>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@63fcc000 {
+ compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ clocks = <&clks 48>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux: audmux@63fd0000 {
+ compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ fec: ethernet@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+ };
+ };
+};
projects / ~emulex / infiniband.git / commitdiff