ASoC: da7210: Minor bugfix for non pll slave mode

This patch fixes a bug discovered during testing of non pll slave mode.
Due to the bug chip was not getting correctly configured and as a result
there was no sound output while playback. After applying this patch,
both pll and non pll modes work fine.

Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index f92d1f7777571ecdeb5b2833cbefef2fcdd60e36..10f52ff14daac70cb8d0522a32fe1c85b3cba517 100644 (file)
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -1159,8 +1159,9 @@ static int da7210_probe(struct snd_soc_codec *codec)
        /* Enable Aux2 */
        snd_soc_write(codec, DA7210_AUX2, DA7210_AUX2_EN);
 
-       /* Set PLL Master clock range 10-20 MHz */
-       snd_soc_write(codec, DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ);
+       /* Set PLL Master clock range 10-20 MHz, enable PLL bypass */
+       snd_soc_write(codec, DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ |
+                                             DA7210_PLL_BYP);
 
        /* Diable PLL and bypass it */
        snd_soc_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
@@ -1191,8 +1192,8 @@ static struct reg_default da7210_regmap_i2c_patch[] = {
 
        /* System controller master disable */
        { DA7210_STARTUP1, 0x00 },
-       /* make sure that DA7210 use bypass mode before start up */
-       { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP },
+       /* Set PLL Master clock range 10-20 MHz */
+       { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ },
 
        /* to unlock */
        { DA7210_A_HID_UNLOCK, 0x8B},
@@ -1290,8 +1291,8 @@ static struct reg_default da7210_regmap_spi_patch[] = {
 
        /* System controller master disable */
        { DA7210_STARTUP1, 0x00 },
-       /* make sure that DA7210 use bypass mode before start up */
-       { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP },
+       /* Set PLL Master clock range 10-20 MHz */
+       { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ },
 
        /* to set PAGE1 of SPI register space */
        { DA7210_PAGE_CONTROL, 0x80 },