return 0;
}
+/*
+ * t4_mem_win_rw - read/write memory through PCIE memory window
+ * @adap: the adapter
+ * @addr: address of first byte requested
+ * @data: MEMWIN0_APERTURE bytes of data containing the requested address
+ * @dir: direction of transfer 1 => read, 0 => write
+ *
+ * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a
+ * MEMWIN0_APERTURE-byte-aligned address that covers the requested
+ * address @addr.
+ */
+static int t4_mem_win_rw(struct adapter *adap, u32 addr, __be32 *data, int dir)
+{
+ int i;
+
+ /*
+ * Setup offset into PCIE memory window. Address must be a
+ * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to
+ * ensure that changes propagate before we attempt to use the new
+ * values.)
+ */
+ t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET,
+ addr & ~(MEMWIN0_APERTURE - 1));
+ t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET);
+
+ /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */
+ for (i = 0; i < MEMWIN0_APERTURE; i = i+0x4) {
+ if (dir)
+ *data++ = t4_read_reg(adap, (MEMWIN0_BASE + i));
+ else
+ t4_write_reg(adap, (MEMWIN0_BASE + i), *data++);
+ }
+
+ return 0;
+}
+
+/**
+ * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
+ * @adap: the adapter
+ * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
+ * @addr: address within indicated memory type
+ * @len: amount of memory to transfer
+ * @buf: host memory buffer
+ * @dir: direction of transfer 1 => read, 0 => write
+ *
+ * Reads/writes an [almost] arbitrary memory region in the firmware: the
+ * firmware memory address, length and host buffer must be aligned on
+ * 32-bit boudaries. The memory is transferred as a raw byte sequence
+ * from/to the firmware's memory. If this memory contains data
+ * structures which contain multi-byte integers, it's the callers
+ * responsibility to perform appropriate byte order conversions.
+ */
+static int t4_memory_rw(struct adapter *adap, int mtype, u32 addr, u32 len,
+ __be32 *buf, int dir)
+{
+ u32 pos, start, end, offset, memoffset;
+ int ret;
+
+ /*
+ * Argument sanity checks ...
+ */
+ if ((addr & 0x3) || (len & 0x3))
+ return -EINVAL;
+
+ /*
+ * Offset into the region of memory which is being accessed
+ * MEM_EDC0 = 0
+ * MEM_EDC1 = 1
+ * MEM_MC = 2
+ */
+ memoffset = (mtype * (5 * 1024 * 1024));
+
+ /* Determine the PCIE_MEM_ACCESS_OFFSET */
+ addr = addr + memoffset;
+
+ /*
+ * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes
+ * at a time so we need to round down the start and round up the end.
+ * We'll start copying out of the first line at (addr - start) a word
+ * at a time.
+ */
+ start = addr & ~(MEMWIN0_APERTURE-1);
+ end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1);
+ offset = (addr - start)/sizeof(__be32);
+
+ for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) {
+ __be32 data[MEMWIN0_APERTURE/sizeof(__be32)];
+
+ /*
+ * If we're writing, copy the data from the caller's memory
+ * buffer
+ */
+ if (!dir) {
+ /*
+ * If we're doing a partial write, then we need to do
+ * a read-modify-write ...
+ */
+ if (offset || len < MEMWIN0_APERTURE) {
+ ret = t4_mem_win_rw(adap, pos, data, 1);
+ if (ret)
+ return ret;
+ }
+ while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
+ len > 0) {
+ data[offset++] = *buf++;
+ len -= sizeof(__be32);
+ }
+ }
+
+ /*
+ * Transfer a block of memory and bail if there's an error.
+ */
+ ret = t4_mem_win_rw(adap, pos, data, dir);
+ if (ret)
+ return ret;
+
+ /*
+ * If we're reading, copy the data into the caller's memory
+ * buffer.
+ */
+ if (dir)
+ while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
+ len > 0) {
+ *buf++ = data[offset++];
+ len -= sizeof(__be32);
+ }
+ }
+
+ return 0;
+}
+
+int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len,
+ __be32 *buf)
+{
+ return t4_memory_rw(adap, mtype, addr, len, buf, 0);
+}
+
#define EEPROM_STAT_ADDR 0x7bfc
#define VPD_BASE 0
#define VPD_LEN 512
enum {
SF_PAGE_SIZE = 256, /* serial flash page size */
+ SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */
};
enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */
#define QINTR_CNT_EN 0x1
#define QINTR_TIMER_IDX(x) ((x) << 1)
#define QINTR_TIMER_IDX_GET(x) (((x) >> 1) & 0x7)
+
+/*
+ * Flash layout.
+ */
+#define FLASH_START(start) ((start) * SF_SEC_SIZE)
+#define FLASH_MAX_SIZE(nsecs) ((nsecs) * SF_SEC_SIZE)
+
+enum {
+ /*
+ * Various Expansion-ROM boot images, etc.
+ */
+ FLASH_EXP_ROM_START_SEC = 0,
+ FLASH_EXP_ROM_NSECS = 6,
+ FLASH_EXP_ROM_START = FLASH_START(FLASH_EXP_ROM_START_SEC),
+ FLASH_EXP_ROM_MAX_SIZE = FLASH_MAX_SIZE(FLASH_EXP_ROM_NSECS),
+
+ /*
+ * iSCSI Boot Firmware Table (iBFT) and other driver-related
+ * parameters ...
+ */
+ FLASH_IBFT_START_SEC = 6,
+ FLASH_IBFT_NSECS = 1,
+ FLASH_IBFT_START = FLASH_START(FLASH_IBFT_START_SEC),
+ FLASH_IBFT_MAX_SIZE = FLASH_MAX_SIZE(FLASH_IBFT_NSECS),
+
+ /*
+ * Boot configuration data.
+ */
+ FLASH_BOOTCFG_START_SEC = 7,
+ FLASH_BOOTCFG_NSECS = 1,
+ FLASH_BOOTCFG_START = FLASH_START(FLASH_BOOTCFG_START_SEC),
+ FLASH_BOOTCFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_BOOTCFG_NSECS),
+
+ /*
+ * Location of firmware image in FLASH.
+ */
+ FLASH_FW_START_SEC = 8,
+ FLASH_FW_NSECS = 8,
+ FLASH_FW_START = FLASH_START(FLASH_FW_START_SEC),
+ FLASH_FW_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FW_NSECS),
+
+ /*
+ * iSCSI persistent/crash information.
+ */
+ FLASH_ISCSI_CRASH_START_SEC = 29,
+ FLASH_ISCSI_CRASH_NSECS = 1,
+ FLASH_ISCSI_CRASH_START = FLASH_START(FLASH_ISCSI_CRASH_START_SEC),
+ FLASH_ISCSI_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_ISCSI_CRASH_NSECS),
+
+ /*
+ * FCoE persistent/crash information.
+ */
+ FLASH_FCOE_CRASH_START_SEC = 30,
+ FLASH_FCOE_CRASH_NSECS = 1,
+ FLASH_FCOE_CRASH_START = FLASH_START(FLASH_FCOE_CRASH_START_SEC),
+ FLASH_FCOE_CRASH_MAX_SIZE = FLASH_MAX_SIZE(FLASH_FCOE_CRASH_NSECS),
+
+ /*
+ * Location of Firmware Configuration File in FLASH. Since the FPGA
+ * "FLASH" is smaller we need to store the Configuration File in a
+ * different location -- which will overlap the end of the firmware
+ * image if firmware ever gets that large ...
+ */
+ FLASH_CFG_START_SEC = 31,
+ FLASH_CFG_NSECS = 1,
+ FLASH_CFG_START = FLASH_START(FLASH_CFG_START_SEC),
+ FLASH_CFG_MAX_SIZE = FLASH_MAX_SIZE(FLASH_CFG_NSECS),
+
+ FLASH_FPGA_CFG_START_SEC = 15,
+ FLASH_FPGA_CFG_START = FLASH_START(FLASH_FPGA_CFG_START_SEC),
+
+ /*
+ * Sectors 32-63 are reserved for FLASH failover.
+ */
+};
+
+#undef FLASH_START
+#undef FLASH_MAX_SIZE
+
#endif /* __T4_HW_H */
projects / ~shefty / rdma-dev.git / commitdiff