MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(FRAME_BAR), &FrameBar,
END_OF_ARGS);
+
if (1) // Now we always send BAR.
{
+#ifndef RT30xx
MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
+#endif
+#ifdef RT30xx
+ MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
+#endif
}
MlmeFreeMemory(pAd, pOutBuffer);
}
pBAEntry->TimeOutValue = TimeOut;
pBAEntry->pAdapter = pAd;
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_TRACE,("Send AddBA to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d isForced:%d Wcid:%d\n"
+ ,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
+ ,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
+ ,TID,isForced,pEntry->Aid));
+#endif
+
if (!(pEntry->TXBAbitmap & (1<<TID)))
{
RTMPInitTimer(pAd, &pBAEntry->ORIBATimer, GET_TIMER_FUNCTION(BAOriSessionSetupTimeout), pBAEntry, FALSE);
AddbaReq.Token = pBAEntry->Token;
MlmeEnqueue(pAd, ACTION_STATE_MACHINE, MT2_MLME_ADD_BA_CATE, sizeof(MLME_ADDBA_REQ_STRUCT), (PVOID)&AddbaReq);
RT28XX_MLME_HANDLER(pAd);
+#ifndef RT30xx
DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) : Send ADD BA again\n", pBAEntry->Token));
-
+#endif
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_TRACE,("BA Ori Session Timeout(%d) to %02x:%02x:%02x:%02x:%02x:%02x Tid:%d Wcid:%d\n"
+ ,pBAEntry->Token
+ ,pEntry->Addr[0],pEntry->Addr[1],pEntry->Addr[2]
+ ,pEntry->Addr[3],pEntry->Addr[4],pEntry->Addr[5]
+ ,pBAEntry->TID,pEntry->Aid));
+#endif
pBAEntry->Token++;
RTMPSetTimer(&pBAEntry->ORIBATimer, ORI_BA_SESSION_TIMEOUT);
}
//ULONG Idx;
FRAME_PSMP_ACTION Frame;
ULONG FrameLen;
+#ifdef RT30xx
+ UCHAR bbpdata=0;
+ UINT32 macdata;
+#endif // RT30xx //
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
if (NStatus != NDIS_STATUS_SUCCESS)
switch (Psmp)
{
case MMPS_ENABLE:
+#ifdef RT30xx
+ if (IS_RT3090(pAd))
+ {
+ // disable MMPS BBP control register
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+ bbpdata &= ~(0x04); //bit 2
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+ // disable MMPS MAC control register
+ RTMP_IO_READ32(pAd, 0x1210, &macdata);
+ macdata &= ~(0x09); //bit 0, 3
+ RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+ }
+#endif // RT30xx //
Frame.Psmp = 0;
break;
case MMPS_DYNAMIC:
+#ifdef RT30xx
+ if (IS_RT3090(pAd))
+ {
+ // enable MMPS BBP control register
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+ bbpdata |= 0x04; //bit 2
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+ // enable MMPS MAC control register
+ RTMP_IO_READ32(pAd, 0x1210, &macdata);
+ macdata |= 0x09; //bit 0, 3
+ RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+ }
+#endif // RT30xx //
Frame.Psmp = 3;
break;
case MMPS_STATIC:
+#ifdef RT30xx
+ if (IS_RT3090(pAd))
+ {
+ // enable MMPS BBP control register
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
+ bbpdata |= 0x04; //bit 2
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);
+
+ // enable MMPS MAC control register
+ RTMP_IO_READ32(pAd, 0x1210, &macdata);
+ macdata |= 0x09; //bit 0, 3
+ RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+ }
+#endif // RT30xx //
Frame.Psmp = 1;
break;
}
PNDIS_PACKET pPacket;
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
ULONG FreeNum;
+#ifdef RT2860
unsigned long IrqFlags = 0;
+#endif
UCHAR IrqState;
UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
IrqState = pAd->irq_disabled;
+#ifdef RT2860
if ((pAd->MACVersion == 0x28600100) && (!IrqState))
RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-
+#endif
do
{
// Reset is in progress, stop immediately
} while (FALSE);
+#ifdef RT2860
// 2860C use Tx Ring
if ((pAd->MACVersion == 0x28600100) && (!IrqState))
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-
+#endif
return Status;
}
-
+#ifdef RT2860
NDIS_STATUS MiniportMMRequestUnlock(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
return Status;
}
+#endif
+#ifdef RT30xx
+NDIS_STATUS MlmeDataHardTransmit(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR QueIdx,
+ IN PNDIS_PACKET pPacket);
+
+#define MAX_DATAMM_RETRY 3
+/*
+ ========================================================================
+
+ Routine Description:
+ API for MLME to transmit management frame to AP (BSS Mode)
+ or station (IBSS Mode)
+
+ Arguments:
+ pAd Pointer to our adapter
+ pData Pointer to the outgoing 802.11 frame
+ Length Size of outgoing management frame
+
+ Return Value:
+ NDIS_STATUS_FAILURE
+ NDIS_STATUS_PENDING
+ NDIS_STATUS_SUCCESS
+
+ IRQL = PASSIVE_LEVEL
+ IRQL = DISPATCH_LEVEL
+
+ Note:
+
+ ========================================================================
+*/
+NDIS_STATUS MiniportDataMMRequest(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR QueIdx,
+ IN PUCHAR pData,
+ IN UINT Length)
+{
+ PNDIS_PACKET pPacket;
+ NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
+ ULONG FreeNum;
+ int retry = 0;
+ UCHAR IrqState;
+ UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
+
+ ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);
+
+ // 2860C use Tx Ring
+ IrqState = pAd->irq_disabled;
+
+ do
+ {
+ // Reset is in progress, stop immediately
+ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
+ RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
+ !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
+ {
+ Status = NDIS_STATUS_FAILURE;
+ break;
+ }
+
+ // Check Free priority queue
+ // Since we use PBF Queue2 for management frame. Its corresponding DMA ring should be using TxRing.
+
+ // 2860C use Tx Ring
+
+ // free Tx(QueIdx) resources
+ FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
+
+ if ((FreeNum > 0))
+ {
+ // We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
+ NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
+ Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
+ if (Status != NDIS_STATUS_SUCCESS)
+ {
+ DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
+ break;
+ }
+
+ //pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
+ //pAd->CommonCfg.MlmeRate = RATE_2;
+ Status = MlmeDataHardTransmit(pAd, QueIdx, pPacket);
+ if (Status != NDIS_STATUS_SUCCESS)
+ RTMPFreeNdisPacket(pAd, pPacket);
+ retry = MAX_DATAMM_RETRY;
+ }
+ else
+ {
+ retry ++;
+
+ printk("retry %d\n", retry);
+ pAd->RalinkCounters.MgmtRingFullCount++;
+
+ if (retry >= MAX_DATAMM_RETRY)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in DataRing, MgmtRingFullCount=%ld!\n",
+ QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
+ }
+ }
+
+ } while (retry < MAX_DATAMM_RETRY);
+
+
+ return Status;
+}
+#endif /* RT30xx */
+
/*
========================================================================
return NDIS_STATUS_FAILURE;
}
+#ifdef RT2860
if ( pAd->MACVersion == 0x28600100 )
return MlmeHardTransmitTxRing(pAd,QueIdx,pPacket);
else
+#endif
return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
}
-
+#ifdef RT2860
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
return NDIS_STATUS_SUCCESS;
}
+#endif /* RT2860 */
+
+#ifdef RT30xx
+NDIS_STATUS MlmeDataHardTransmit(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR QueIdx,
+ IN PNDIS_PACKET pPacket)
+{
+ if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
+ )
+ {
+ return NDIS_STATUS_FAILURE;
+ }
+#ifdef RT2870
+ return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
+#endif // RT2870 //
+}
+#endif /* RT30xx */
NDIS_STATUS MlmeHardTransmitMgmtRing(
IN PRTMP_ADAPTER pAd,
// outgoing frame always wakeup PHY to prevent frame lost
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#ifdef RT2860
AsicForceWakeup(pAd, FROM_TX);
+#endif
+#ifdef RT2870
+ AsicForceWakeup(pAd, TRUE);
+#endif
pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA + TXINFO_SIZE);
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
{
// If support WMM, enable it.
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+#endif
+#ifdef RT2870
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
+ CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))
+#endif
TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
}
}
return TRUE;
+
+#ifdef RT30xx
+FillTxBlkErr:
+ return FALSE;
+#endif
}
if (QIdx == NUM_OF_TX_RING)
{
sQIdx = 0;
+//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
eQIdx = 3; // 4 ACs, start from 0.
}
else
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
break;
}
-
+#ifdef RT2860
FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
#ifdef DBG_DIAGNOSE
RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
}
-
+#endif /* RT2860 */
// probe the Queue Head
pQueue = &pAd->TxSwQueue[QueIdx];
if ((pEntry = pQueue->Head) == NULL)
pTxBlk->TxFrameType = TX_LEGACY_FRAME;
}
+#ifdef RT2870
+ DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
+#endif // RT2870 //
Count += pTxBlk->TxPacketList.Number;
// Do HardTransmit now.
Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
+#ifdef RT2860
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
// static rate also need NICUpdateFifoStaCounters() function.
//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
NICUpdateFifoStaCounters(pAd);
+#endif
}
RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
+
+#ifdef RT2870
+ if (!hasTxDesc)
+ RTUSBKickBulkOut(pAd);
+#endif // RT2870 //
}
}
return (NULL);
}
-
+#ifdef RT2860
BOOLEAN RTMPFreeTXDUponTxDmaDone(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx)
DBGPRINT_RAW(RT_DEBUG_TRACE,(" RxSwReadIdx [%d]=", AC0freeIdx));
DBGPRINT_RAW(RT_DEBUG_TRACE,(" pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount));
}
+#endif /* RT2860 */
/*
========================================================================
{
DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n"));
-
+#ifdef RT30xx
+ // After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
+ // R66 should not be 0
+ if (pAd->BbpTuning.R66CurrentValue == 0)
+ {
+ pAd->BbpTuning.R66CurrentValue = 0x38;
+ DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
+ }
+#endif
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
pEntry->AuthMode = pAd->StaCfg.AuthMode;
pEntry->WepStatus = pAd->StaCfg.WepStatus;
pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
+#ifdef RT2860
AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i);
+#endif
}
}
pEntry->PairwiseKey.KeyLen = 0;
pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
+#ifdef RT2860
if ((pAd->OpMode == OPMODE_STA) &&
(pAd->StaCfg.BssType == BSS_ADHOC))
pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
else
+#endif
pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
if (pAd->MacTab.Size == 0)
{
pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
+#ifndef RT30xx
AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
+#endif
+#ifdef RT30xx
+ RT28XX_UPDATE_PROTECT(pAd); // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+#endif
}
return TRUE;
for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
{
+#ifdef RT2860
RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
+#endif
if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
{
// free resources of BA
+#ifdef RT2870
+ NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
+ RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
+#endif // RT2870 //
//AsicDelWcidTab(pAd, i);
}
STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);
+#ifdef RT2870
+ if (pAd->CommonCfg.bDisableReordering == 0)
+ {
+ PBA_REC_ENTRY pBAEntry;
+ ULONG Now32;
+ UCHAR Wcid = pRxBlk->pRxWI->WirelessCliID;
+ UCHAR TID = pRxBlk->pRxWI->TID;
+ USHORT Idx;
+
+#define REORDERING_PACKET_TIMEOUT ((100 * HZ)/1000) // system ticks -- 100 ms
+
+ if (Wcid < MAX_LEN_OF_MAC_TABLE)
+ {
+ Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
+ if (Idx != 0)
+ {
+ pBAEntry = &pAd->BATable.BARecEntry[Idx];
+ // update last rx time
+ NdisGetSystemUpTime(&Now32);
+ if ((pBAEntry->list.qlen > 0) &&
+ RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
+ )
+ {
+ printk("Indicate_Legacy_Packet():flush reordering_timeout_mpdus! RxWI->Flags=%d, pRxWI.TID=%d, RxD->AMPDU=%d!\n", pRxBlk->Flags, pRxBlk->pRxWI->TID, pRxBlk->RxD.AMPDU);
+ hex_dump("Dump the legacy Packet:", GET_OS_PKT_DATAPTR(pRxBlk->pRxPacket), 64);
+ ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
+ }
+ }
+ }
+ }
+#endif // RT2870 //
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
+#ifdef RT2860
INT i, QueIdx=0;
PRT28XX_RXD_STRUC pRxD;
PTXD_STRUC pTxD;
hex_dump("Rx Descriptor", (char *)pRxD, 16);
printk("pRxD->DDONE = %x\n", pRxD->DDONE);
}
-
+#endif /* RT2860 */
return TRUE;
}
pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
}
+#ifndef RT30xx
+#ifdef RT2870
+ /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/
+ if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
+ {
+ pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0;
+ pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
+ }
+#endif // RT2870 //
+#endif
if(pHTPhyMode->SHORTGI == GI_400)
{
}
// For key index and ext IV bit, so only need to update the position(offset+3).
+#ifdef RT2860
RTMP_IO_WRITE8(pAd, offset+3, IVEIV);
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV);
+#endif // RT2870 //
DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri));
Value = simple_strtol(arg, 0, 10);
if (Value == 0)
+ {
pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
+#ifdef RT30xx
+ pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
+#endif
+ }
else if (Value == 1)
+ {
pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+#ifdef RT30xx
+ pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
+#endif
+ }
else
return FALSE; //Invalid argument
pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
+#ifdef RT30xx
+ pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+#endif
SetCommonHT(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA));
{
case Ndis802_11AuthModeOpen:
return "OPEN";
+#if defined(RT2860) || defined(RT30xx)
default:
+#endif
case Ndis802_11AuthModeWPAPSK:
return "WPAPSK";
case Ndis802_11AuthModeShared:
return "WPAPSKWPA2PSK";
case Ndis802_11AuthModeWPA1WPA2:
return "WPA1WPA2";
+#ifndef RT30xx
case Ndis802_11AuthModeWPANone:
return "WPANONE";
+#ifdef RT2870
+ default:
+ return "UNKNOW";
+#endif
+#endif
}
}
{
switch(encryMode)
{
+#if defined(RT2860) || defined(RT30xx)
default:
+#endif
case Ndis802_11WEPDisabled:
return "NONE";
case Ndis802_11WEPEnabled:
return "AES";
case Ndis802_11Encryption4Enabled:
return "TKIPAES";
+#if !defined(RT2860) && !defined(RT30xx)
+ default:
+ return "UNKNOW";
+#endif
}
}
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
}
+#ifdef RT2870
+ else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
+ {
+ pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
+ MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
+ }
+#endif // RT2870 //
else
{
{
// BBP and RF are not accessible in PS mode, we has to wake them up first
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#ifdef RT2860
AsicForceWakeup(pAd, FROM_TX);
-
+#endif
+#ifdef RT2870
+ AsicForceWakeup(pAd, TRUE);
+#endif
// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
if (pAd->StaCfg.Psm == PWR_SAVE)
MlmeSetPsmBit(pAd, PWR_ACTIVE);
// WPA OUI
UCHAR OUI_WPA_NONE_AKM[4] = {0x00, 0x50, 0xF2, 0x00};
UCHAR OUI_WPA_VERSION[4] = {0x00, 0x50, 0xF2, 0x01};
+#ifndef RT30xx
UCHAR OUI_WPA_WEP40[4] = {0x00, 0x50, 0xF2, 0x01};
+#endif
UCHAR OUI_WPA_TKIP[4] = {0x00, 0x50, 0xF2, 0x02};
UCHAR OUI_WPA_CCMP[4] = {0x00, 0x50, 0xF2, 0x04};
+#ifndef RT30xx
UCHAR OUI_WPA_WEP104[4] = {0x00, 0x50, 0xF2, 0x05};
+#endif
UCHAR OUI_WPA_8021X_AKM[4] = {0x00, 0x50, 0xF2, 0x01};
UCHAR OUI_WPA_PSK_AKM[4] = {0x00, 0x50, 0xF2, 0x02};
// WPA2 OUI
UCHAR OUI_WPA2_CCMP[4] = {0x00, 0x0F, 0xAC, 0x04};
UCHAR OUI_WPA2_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x01};
UCHAR OUI_WPA2_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x02};
+#ifndef RT30xx
UCHAR OUI_WPA2_WEP104[4] = {0x00, 0x0F, 0xAC, 0x05};
+#endif
// MSA OUI
UCHAR OUI_MSA_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x05}; // Not yet final - IEEE 802.11s-D1.06
UCHAR OUI_MSA_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x06}; // Not yet final - IEEE 802.11s-D1.06
break;
}
+#ifndef RT30xx
if ((pAd->OpMode == OPMODE_STA) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
break;
}
}
-
+#endif
// swap for big-endian platform
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
break;
}
+#ifndef RT30xx
if ((pAd->OpMode == OPMODE_STA) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
break;
}
}
-
+#endif
// swap for big-endian platform
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
RaiseClock(pAd, &x);
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-
+#ifdef RT30xx
+ LowerClock(pAd, &x); //prevent read failed
+#endif
x &= ~(EEDI);
if(x & EEDO)
data |= 1;
+#ifndef RT30xx
LowerClock(pAd, &x);
+#endif
}
return data;
UINT32 x;
USHORT data;
+#ifdef RT30xx
+ if (pAd->NicConfig2.field.AntDiversity)
+ {
+ pAd->EepromAccess = TRUE;
+ }
+//2008/09/11:KH add to support efuse<--
+//2008/09/11:KH add to support efuse-->
+{
+#endif
Offset /= 2;
// reset bits and set EECS
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+#ifdef RT30xx
+ // patch can not access e-Fuse issue
+ if (!IS_RT3090(pAd))
+ {
+#endif
// kick a pulse
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
+#ifdef RT30xx
+ }
+#endif
// output the read_opcode and register number in that order
ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
EEpromCleanup(pAd);
+#ifdef RT30xx
+ // Antenna and EEPROM access are both using EESK pin,
+ // Therefor we should avoid accessing EESK at the same time
+ // Then restore antenna after EEPROM access
+ if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
+ {
+ pAd->EepromAccess = FALSE;
+ AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+ }
+}
+#endif
return data;
} //ReadEEprom
{
UINT32 x;
+#ifdef RT30xx
+ if (pAd->NicConfig2.field.AntDiversity)
+ {
+ pAd->EepromAccess = TRUE;
+ }
+ //2008/09/11:KH add to support efuse<--
+//2008/09/11:KH add to support efuse-->
+ {
+#endif
Offset /= 2;
EWEN(pAd);
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+#ifdef RT30xx
+ // patch can not access e-Fuse issue
+ if (!IS_RT3090(pAd))
+ {
+#endif
// kick a pulse
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
+#ifdef RT30xx
+ }
+#endif
// output the read_opcode ,register number and data in that order
ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
EWDS(pAd);
EEpromCleanup(pAd);
+
+#ifdef RT30xx
+ // Antenna and EEPROM access are both using EESK pin,
+ // Therefor we should avoid accessing EESK at the same time
+ // Then restore antenna after EEPROM access
+ if ((pAd->NicConfig2.field.AntDiversity) || (pAd->RfIcType == RFIC_3020))
+ {
+ pAd->EepromAccess = FALSE;
+ AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+ }
+}
+#endif
+}
+
+//2008/09/11:KH add to support efuse<--
+#ifdef RT30xx
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+UCHAR eFuseReadRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData)
+{
+ EFUSE_CTRL_STRUC eFuseCtrlStruc;
+ int i;
+ USHORT efuseDataOffset;
+ UINT32 data;
+
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ //Use the eeprom logical address and covert to address to block number
+ eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+ //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 0.
+ eFuseCtrlStruc.field.EFSROM_MODE = 0;
+
+ //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+ eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+ NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+ RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+ //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+ i = 0;
+ while(i < 100)
+ {
+ //rtmp.HwMemoryReadDword(EFUSE_CTRL, (DWORD *) &eFuseCtrlStruc, 4);
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+ if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+ {
+ break;
+ }
+ RTMPusecDelay(2);
+ i++;
+ }
+
+ //if EFSROM_AOUT is not found in physical address, write 0xffff
+ if (eFuseCtrlStruc.field.EFSROM_AOUT == 0x3f)
+ {
+ for(i=0; i<Length/2; i++)
+ *(pData+2*i) = 0xffff;
+ }
+ else
+ {
+ //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x590-0x59C)
+ efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC) ;
+ //data hold 4 bytes data.
+ //In RTMP_IO_READ32 will automatically execute 32-bytes swapping
+ RTMP_IO_READ32(pAd, efuseDataOffset, &data);
+ //Decide the upper 2 bytes or the bottom 2 bytes.
+ // Little-endian S | S Big-endian
+ // addr 3 2 1 0 | 0 1 2 3
+ // Ori-V D C B A | A B C D
+ //After swapping
+ // D C B A | D C B A
+ //Return 2-bytes
+ //The return byte statrs from S. Therefore, the little-endian will return BA, the Big-endian will return DC.
+ //For returning the bottom 2 bytes, the Big-endian should shift right 2-bytes.
+ data = data >> (8*(Offset & 0x3));
+
+ NdisMoveMemory(pData, &data, Length);
+ }
+
+ return (UCHAR) eFuseCtrlStruc.field.EFSROM_AOUT;
+
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+VOID eFusePhysicalReadRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData)
+{
+ EFUSE_CTRL_STRUC eFuseCtrlStruc;
+ int i;
+ USHORT efuseDataOffset;
+ UINT32 data;
+
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+ //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+ //Read in physical view
+ eFuseCtrlStruc.field.EFSROM_MODE = 1;
+
+ //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+ eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+ NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+ RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+ //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+ i = 0;
+ while(i < 100)
+ {
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+ if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+ break;
+ RTMPusecDelay(2);
+ i++;
+ }
+
+ //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+ //Because the size of each EFUSE_DATA is 4 Bytes, the size of address of each is 2 bits.
+ //The previous 2 bits is the EFUSE_DATA number, the last 2 bits is used to decide which bytes
+ //Decide which EFUSE_DATA to read
+ //590:F E D C
+ //594:B A 9 8
+ //598:7 6 5 4
+ //59C:3 2 1 0
+ efuseDataOffset = EFUSE_DATA3 - (Offset & 0xC) ;
+
+ RTMP_IO_READ32(pAd, efuseDataOffset, &data);
+
+ data = data >> (8*(Offset & 0x3));
+
+ NdisMoveMemory(pData, &data, Length);
+
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+VOID eFuseReadPhysical(
+ IN PRTMP_ADAPTER pAd,
+ IN PUSHORT lpInBuffer,
+ IN ULONG nInBufferSize,
+ OUT PUSHORT lpOutBuffer,
+ IN ULONG nOutBufferSize
+)
+{
+ USHORT* pInBuf = (USHORT*)lpInBuffer;
+ USHORT* pOutBuf = (USHORT*)lpOutBuffer;
+
+ USHORT Offset = pInBuf[0]; //addr
+ USHORT Length = pInBuf[1]; //length
+ int i;
+
+ for(i=0; i<Length; i+=2)
+ {
+ eFusePhysicalReadRegisters(pAd,Offset+i, 2, &pOutBuf[i/2]);
+ }
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+NTSTATUS eFuseRead(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ OUT PUCHAR pData,
+ IN USHORT Length)
+{
+ USHORT* pOutBuf = (USHORT*)pData;
+ NTSTATUS Status = STATUS_SUCCESS;
+ UCHAR EFSROM_AOUT;
+ int i;
+
+ for(i=0; i<Length; i+=2)
+ {
+ EFSROM_AOUT = eFuseReadRegisters(pAd, Offset+i, 2, &pOutBuf[i/2]);
+ }
+ return Status;
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+VOID eFusePhysicalWriteRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData)
+{
+ EFUSE_CTRL_STRUC eFuseCtrlStruc;
+ int i;
+ USHORT efuseDataOffset;
+ UINT32 data, eFuseDataBuffer[4];
+
+ //Step0. Write 16-byte of data to EFUSE_DATA0-3 (0x590-0x59C), where EFUSE_DATA0 is the LSB DW, EFUSE_DATA3 is the MSB DW.
+
+ /////////////////////////////////////////////////////////////////
+ //read current values of 16-byte block
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ //Step0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+ //Step1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+ eFuseCtrlStruc.field.EFSROM_MODE = 1;
+
+ //Step2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+ eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+ NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+ RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+ //Step3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+ i = 0;
+ while(i < 100)
+ {
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+ break;
+ RTMPusecDelay(2);
+ i++;
+ }
+
+ //Step4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+ efuseDataOffset = EFUSE_DATA3;
+ for(i=0; i< 4; i++)
+ {
+ RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &eFuseDataBuffer[i]);
+ efuseDataOffset -= 4;
+ }
+
+ //Update the value, the offset is multiple of 2, length is 2
+ efuseDataOffset = (Offset & 0xc) >> 2;
+ data = pData[0] & 0xffff;
+ //The offset should be 0x***10 or 0x***00
+ if((Offset % 4) != 0)
+ {
+ eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff) | (data << 16);
+ }
+ else
+ {
+ eFuseDataBuffer[efuseDataOffset] = (eFuseDataBuffer[efuseDataOffset] & 0xffff0000) | data;
+ }
+
+ efuseDataOffset = EFUSE_DATA3;
+ for(i=0; i< 4; i++)
+ {
+ RTMP_IO_WRITE32(pAd, efuseDataOffset, eFuseDataBuffer[i]);
+ efuseDataOffset -= 4;
+ }
+ /////////////////////////////////////////////////////////////////
+
+ //Step1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+ //Step2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
+ eFuseCtrlStruc.field.EFSROM_MODE = 3;
+
+ //Step3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
+ eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+ NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+ RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+ //Step4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It��s done.
+ i = 0;
+ while(i < 100)
+ {
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+ break;
+
+ RTMPusecDelay(2);
+ i++;
+ }
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+NTSTATUS eFuseWriteRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ IN USHORT* pData)
+{
+ USHORT i;
+ USHORT eFuseData;
+ USHORT LogicalAddress, BlkNum = 0xffff;
+ UCHAR EFSROM_AOUT;
+
+ USHORT addr,tmpaddr, InBuf[3], tmpOffset;
+ USHORT buffer[8];
+ BOOLEAN bWriteSuccess = TRUE;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters Offset=%x, pData=%x\n", Offset, *pData));
+
+ //Step 0. find the entry in the mapping table
+ //The address of EEPROM is 2-bytes alignment.
+ //The last bit is used for alignment, so it must be 0.
+ tmpOffset = Offset & 0xfffe;
+ EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
+
+ if( EFSROM_AOUT == 0x3f)
+ { //find available logical address pointer
+ //the logical address does not exist, find an empty one
+ //from the first address of block 45=16*45=0x2d0 to the last address of block 47
+ //==>48*16-3(reserved)=2FC
+ for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+ {
+ //Retrive the logical block nubmer form each logical address pointer
+ //It will access two logical address pointer each time.
+ eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+ if( (LogicalAddress & 0xff) == 0)
+ {//Not used logical address pointer
+ BlkNum = i-EFUSE_USAGE_MAP_START;
+ break;
+ }
+ else if(( (LogicalAddress >> 8) & 0xff) == 0)
+ {//Not used logical address pointer
+ if (i != EFUSE_USAGE_MAP_END)
+ {
+ BlkNum = i-EFUSE_USAGE_MAP_START+1;
+ }
+ break;
+ }
+ }
+ }
+ else
+ {
+ BlkNum = EFSROM_AOUT;
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
+
+ if(BlkNum == 0xffff)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+ return FALSE;
+ }
+
+ //Step 1. Save data of this block which is pointed by the avaible logical address pointer
+ // read and save the original block data
+ for(i =0; i<8; i++)
+ {
+ addr = BlkNum * 0x10 ;
+
+ InBuf[0] = addr+2*i;
+ InBuf[1] = 2;
+ InBuf[2] = 0x0;
+
+ eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+ buffer[i] = InBuf[2];
+ }
+
+ //Step 2. Update the data in buffer, and write the data to Efuse
+ buffer[ (Offset >> 1) % 8] = pData[0];
+
+ do
+ {
+ //Step 3. Write the data to Efuse
+ if(!bWriteSuccess)
+ {
+ for(i =0; i<8; i++)
+ {
+ addr = BlkNum * 0x10 ;
+
+ InBuf[0] = addr+2*i;
+ InBuf[1] = 2;
+ InBuf[2] = buffer[i];
+
+ eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+ }
+ }
+ else
+ {
+ addr = BlkNum * 0x10 ;
+
+ InBuf[0] = addr+(Offset % 16);
+ InBuf[1] = 2;
+ InBuf[2] = pData[0];
+
+ eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+ }
+
+ //Step 4. Write mapping table
+ addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+ tmpaddr = addr;
+
+ if(addr % 2 != 0)
+ addr = addr -1;
+ InBuf[0] = addr;
+ InBuf[1] = 2;
+
+ //convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
+ tmpOffset = Offset;
+ tmpOffset >>= 4;
+ tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^ (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
+ tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
+
+ // write the logical address
+ if(tmpaddr%2 != 0)
+ InBuf[2] = tmpOffset<<8;
+ else
+ InBuf[2] = tmpOffset;
+
+ eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
+
+ //Step 5. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
+ bWriteSuccess = TRUE;
+ for(i =0; i<8; i++)
+ {
+ addr = BlkNum * 0x10 ;
+
+ InBuf[0] = addr+2*i;
+ InBuf[1] = 2;
+ InBuf[2] = 0x0;
+
+ eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+ if(buffer[i] != InBuf[2])
+ {
+ bWriteSuccess = FALSE;
+ break;
+ }
+ }
+
+ //Step 6. invlidate mapping entry and find a free mapping entry if not succeed
+ if (!bWriteSuccess)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess BlkNum = %d\n", BlkNum));
+
+ // the offset of current mapping entry
+ addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+ //find a new mapping entry
+ BlkNum = 0xffff;
+ for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+ {
+ eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+ if( (LogicalAddress & 0xff) == 0)
+ {
+ BlkNum = i-EFUSE_USAGE_MAP_START;
+ break;
+ }
+ else if(( (LogicalAddress >> 8) & 0xff) == 0)
+ {
+ if (i != EFUSE_USAGE_MAP_END)
+ {
+ BlkNum = i+1-EFUSE_USAGE_MAP_START;
+ }
+ break;
+ }
+ }
+ DBGPRINT(RT_DEBUG_TRACE, ("Not bWriteSuccess new BlkNum = %d\n", BlkNum));
+ if(BlkNum == 0xffff)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+ return FALSE;
+ }
+
+ //invalidate the original mapping entry if new entry is not found
+ tmpaddr = addr;
+
+ if(addr % 2 != 0)
+ addr = addr -1;
+ InBuf[0] = addr;
+ InBuf[1] = 2;
+
+ eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+ // write the logical address
+ if(tmpaddr%2 != 0)
+ {
+ // Invalidate the high byte
+ for (i=8; i<15; i++)
+ {
+ if( ( (InBuf[2] >> i) & 0x01) == 0)
+ {
+ InBuf[2] |= (0x1 <<i);
+ break;
+ }
+ }
+ }
+ else
+ {
+ // invalidate the low byte
+ for (i=0; i<8; i++)
+ {
+ if( ( (InBuf[2] >> i) & 0x01) == 0)
+ {
+ InBuf[2] |= (0x1 <<i);
+ break;
+ }
+ }
+ }
+ eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
+ }
+ }
+ while(!bWriteSuccess);
+
+ return TRUE;
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+VOID eFuseWritePhysical(
+ IN PRTMP_ADAPTER pAd,
+ PUSHORT lpInBuffer,
+ ULONG nInBufferSize,
+ PUCHAR lpOutBuffer,
+ ULONG nOutBufferSize
+)
+{
+ USHORT* pInBuf = (USHORT*)lpInBuffer;
+ int i;
+ //USHORT* pOutBuf = (USHORT*)ioBuffer;
+
+ USHORT Offset = pInBuf[0]; //addr
+ USHORT Length = pInBuf[1]; //length
+ USHORT* pValueX = &pInBuf[2]; //value ...
+ // Little-endian S | S Big-endian
+ // addr 3 2 1 0 | 0 1 2 3
+ // Ori-V D C B A | A B C D
+ //After swapping
+ // D C B A | D C B A
+ //Both the little and big-endian use the same sequence to write data.
+ //Therefore, we only need swap data when read the data.
+ for(i=0; i<Length; i+=2)
+ {
+ eFusePhysicalWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
+ }
+}
+
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+NTSTATUS eFuseWrite(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN PUCHAR pData,
+ IN USHORT length)
+{
+ int i;
+
+ USHORT* pValueX = (PUSHORT) pData; //value ...
+ //The input value=3070 will be stored as following
+ // Little-endian S | S Big-endian
+ // addr 1 0 | 0 1
+ // Ori-V 30 70 | 30 70
+ //After swapping
+ // 30 70 | 70 30
+ //Casting
+ // 3070 | 7030 (x)
+ //The swapping should be removed for big-endian
+ for(i=0; i<length; i+=2)
+ {
+ eFuseWriteRegisters(pAd, Offset+i, 2, &pValueX[i/2]);
+ }
+
+ return TRUE;
+}
+
+/*
+ ========================================================================
+
+ Routine Description:
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+INT set_eFuseGetFreeBlockCount_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ USHORT i;
+ USHORT LogicalAddress;
+ USHORT efusefreenum=0;
+ if(!pAd->bUseEfuse)
+ return FALSE;
+ for (i = EFUSE_USAGE_MAP_START; i <= EFUSE_USAGE_MAP_END; i+=2)
+ {
+ eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+ if( (LogicalAddress & 0xff) == 0)
+ {
+ efusefreenum= (UCHAR) (EFUSE_USAGE_MAP_END-i+1);
+ break;
+ }
+ else if(( (LogicalAddress >> 8) & 0xff) == 0)
+ {
+ efusefreenum = (UCHAR) (EFUSE_USAGE_MAP_END-i);
+ break;
+ }
+
+ if(i == EFUSE_USAGE_MAP_END)
+ efusefreenum = 0;
+ }
+ printk("efuseFreeNumber is %d\n",efusefreenum);
+ return TRUE;
+}
+INT set_eFusedump_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+USHORT InBuf[3];
+ INT i=0;
+ if(!pAd->bUseEfuse)
+ return FALSE;
+ for(i =0; i<EFUSE_USAGE_MAP_END/2; i++)
+ {
+ InBuf[0] = 2*i;
+ InBuf[1] = 2;
+ InBuf[2] = 0x0;
+
+ eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+ if(i%4==0)
+ printk("\nBlock %x:",i/8);
+ printk("%04x ",InBuf[2]);
+ }
+ return TRUE;
+}
+INT set_eFuseLoadFromBin_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg)
+{
+ CHAR *src;
+ struct file *srcf;
+ INT retval, orgfsuid, orgfsgid;
+ mm_segment_t orgfs;
+ UCHAR *buffer;
+ UCHAR BinFileSize=0;
+ INT i = 0,j=0,k=1;
+ USHORT *PDATA;
+ USHORT DATA;
+ BinFileSize=strlen("RT30xxEEPROM.bin");
+ src = kmalloc(128, MEM_ALLOC_FLAG);
+ NdisZeroMemory(src, 128);
+
+ if(strlen(arg)>0)
+ {
+
+ NdisMoveMemory(src, arg, strlen(arg));
+ }
+
+ else
+ {
+
+ NdisMoveMemory(src, "RT30xxEEPROM.bin", BinFileSize);
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("FileName=%s\n",src));
+ buffer = kmalloc(MAX_EEPROM_BIN_FILE_SIZE, MEM_ALLOC_FLAG);
+
+ if(buffer == NULL)
+ {
+ kfree(src);
+ return FALSE;
+}
+ PDATA=kmalloc(sizeof(USHORT)*8,MEM_ALLOC_FLAG);
+
+ if(PDATA==NULL)
+ {
+ kfree(src);
+
+ kfree(buffer);
+ return FALSE;
+ }
+ /* Don't change to uid 0, let the file be opened as the "normal" user */
+#if 0
+ orgfsuid = current->fsuid;
+ orgfsgid = current->fsgid;
+ current->fsuid=current->fsgid = 0;
+#endif
+ orgfs = get_fs();
+ set_fs(KERNEL_DS);
+
+ if (src && *src)
+ {
+ srcf = filp_open(src, O_RDONLY, 0);
+ if (IS_ERR(srcf))
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
+ return FALSE;
+ }
+ else
+ {
+ // The object must have a read method
+ if (srcf->f_op && srcf->f_op->read)
+ {
+ memset(buffer, 0x00, MAX_EEPROM_BIN_FILE_SIZE);
+ while(srcf->f_op->read(srcf, &buffer[i], 1, &srcf->f_pos)==1)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[i]));
+ if((i+1)%8==0)
+ DBGPRINT(RT_DEBUG_TRACE, ("\n"));
+ i++;
+ if(i>=MAX_EEPROM_BIN_FILE_SIZE)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld reading %s, The file is too large[1024]\n", -PTR_ERR(srcf),src));
+ kfree(PDATA);
+ kfree(buffer);
+ kfree(src);
+ return FALSE;
+ }
+ }
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("--> Error!! System doest not support read function\n"));
+ kfree(PDATA);
+ kfree(buffer);
+ kfree(src);
+ return FALSE;
+ }
+ }
+
+
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("--> Error src or srcf is null\n"));
+ kfree(PDATA);
+ kfree(buffer);
+ return FALSE;
+
+ }
+
+
+ retval=filp_close(srcf,NULL);
+
+ if (retval)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
+ }
+ set_fs(orgfs);
+#if 0
+ current->fsuid = orgfsuid;
+ current->fsgid = orgfsgid;
+#endif
+ for(j=0;j<i;j++)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("%02X ",buffer[j]));
+ if((j+1)%2==0)
+ PDATA[j/2%8]=((buffer[j]<<8)&0xff00)|(buffer[j-1]&0xff);
+ if(j%16==0)
+ {
+ k=buffer[j];
+ }
+ else
+ {
+ k&=buffer[j];
+ if((j+1)%16==0)
+ {
+
+ DBGPRINT(RT_DEBUG_TRACE, (" result=%02X,blk=%02x\n",k,j/16));
+
+ if(k!=0xff)
+ eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
+ else
+ {
+ if(eFuseReadRegisters(pAd,j, 2,(PUSHORT)&DATA)!=0x3f)
+ eFuseWriteRegistersFromBin(pAd,(USHORT)j-15, 16, PDATA);
+ }
+ /*
+ for(l=0;l<8;l++)
+ printk("%04x ",PDATA[l]);
+ printk("\n");
+ */
+ NdisZeroMemory(PDATA,16);
+
+
+ }
+ }
+
+
+ }
+
+
+ kfree(PDATA);
+ kfree(buffer);
+ kfree(src);
+ return TRUE;
+}
+NTSTATUS eFuseWriteRegistersFromBin(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ IN USHORT* pData)
+{
+ USHORT i;
+ USHORT eFuseData;
+ USHORT LogicalAddress, BlkNum = 0xffff;
+ UCHAR EFSROM_AOUT,Loop=0;
+ EFUSE_CTRL_STRUC eFuseCtrlStruc;
+ USHORT efuseDataOffset;
+ UINT32 data,tempbuffer;
+ USHORT addr,tmpaddr, InBuf[3], tmpOffset;
+ UINT32 buffer[4];
+ BOOLEAN bWriteSuccess = TRUE;
+ BOOLEAN bNotWrite=TRUE;
+ BOOLEAN bAllocateNewBlk=TRUE;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin Offset=%x, pData=%04x:%04x:%04x:%04x\n", Offset, *pData,*(pData+1),*(pData+2),*(pData+3)));
+
+ do
+ {
+ //Step 0. find the entry in the mapping table
+ //The address of EEPROM is 2-bytes alignment.
+ //The last bit is used for alignment, so it must be 0.
+ Loop++;
+ tmpOffset = Offset & 0xfffe;
+ EFSROM_AOUT = eFuseReadRegisters(pAd, tmpOffset, 2, &eFuseData);
+
+ if( EFSROM_AOUT == 0x3f)
+ { //find available logical address pointer
+ //the logical address does not exist, find an empty one
+ //from the first address of block 45=16*45=0x2d0 to the last address of block 47
+ //==>48*16-3(reserved)=2FC
+ bAllocateNewBlk=TRUE;
+ for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+ {
+ //Retrive the logical block nubmer form each logical address pointer
+ //It will access two logical address pointer each time.
+ eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+ if( (LogicalAddress & 0xff) == 0)
+ {//Not used logical address pointer
+ BlkNum = i-EFUSE_USAGE_MAP_START;
+ break;
+ }
+ else if(( (LogicalAddress >> 8) & 0xff) == 0)
+ {//Not used logical address pointer
+ if (i != EFUSE_USAGE_MAP_END)
+ {
+ BlkNum = i-EFUSE_USAGE_MAP_START+1;
+ }
+ break;
+ }
+ }
+ }
+ else
+ {
+ bAllocateNewBlk=FALSE;
+ BlkNum = EFSROM_AOUT;
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters BlkNum = %d \n", BlkNum));
+
+ if(BlkNum == 0xffff)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegisters: out of free E-fuse space!!!\n"));
+ return FALSE;
+ }
+ //Step 1.1.0
+ //If the block is not existing in mapping table, create one
+ //and write down the 16-bytes data to the new block
+ if(bAllocateNewBlk)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk\n"));
+ efuseDataOffset = EFUSE_DATA3;
+ for(i=0; i< 4; i++)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("Allocate New Blk, Data%d=%04x%04x\n",3-i,pData[2*i+1],pData[2*i]));
+ tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
+
+
+ RTMP_IO_WRITE32(pAd, efuseDataOffset,tempbuffer);
+ efuseDataOffset -= 4;
+
+ }
+ /////////////////////////////////////////////////////////////////
+
+ //Step1.1.1. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ eFuseCtrlStruc.field.EFSROM_AIN = BlkNum* 0x10 ;
+
+ //Step1.1.2. Write EFSROM_MODE (0x580, bit7:bit6) to 3.
+ eFuseCtrlStruc.field.EFSROM_MODE = 3;
+
+ //Step1.1.3. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical write procedure.
+ eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+ NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+
+ RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+ //Step1.1.4. Polling EFSROM_KICK(0x580, bit30) until it become 0 again. It��s done.
+ i = 0;
+ while(i < 100)
+ {
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+ break;
+
+ RTMPusecDelay(2);
+ i++;
+ }
+
+ }
+ else
+ { //Step1.2.
+ //If the same logical number is existing, check if the writting data and the data
+ //saving in this block are the same.
+ /////////////////////////////////////////////////////////////////
+ //read current values of 16-byte block
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ //Step1.2.0. Write 10-bit of address to EFSROM_AIN (0x580, bit25:bit16). The address must be 16-byte alignment.
+ eFuseCtrlStruc.field.EFSROM_AIN = Offset & 0xfff0;
+
+ //Step1.2.1. Write EFSROM_MODE (0x580, bit7:bit6) to 1.
+ eFuseCtrlStruc.field.EFSROM_MODE = 0;
+
+ //Step1.2.2. Write EFSROM_KICK (0x580, bit30) to 1 to kick-off physical read procedure.
+ eFuseCtrlStruc.field.EFSROM_KICK = 1;
+
+ NdisMoveMemory(&data, &eFuseCtrlStruc, 4);
+ RTMP_IO_WRITE32(pAd, EFUSE_CTRL, data);
+
+ //Step1.2.3. Polling EFSROM_KICK(0x580, bit30) until it become 0 again.
+ i = 0;
+ while(i < 100)
+ {
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, (PUINT32) &eFuseCtrlStruc);
+
+ if(eFuseCtrlStruc.field.EFSROM_KICK == 0)
+ break;
+ RTMPusecDelay(2);
+ i++;
+ }
+
+ //Step1.2.4. Read 16-byte of data from EFUSE_DATA0-3 (0x59C-0x590)
+ efuseDataOffset = EFUSE_DATA3;
+ for(i=0; i< 4; i++)
+ {
+ RTMP_IO_READ32(pAd, efuseDataOffset, (PUINT32) &buffer[i]);
+ efuseDataOffset -= 4;
+ }
+ //Step1.2.5. Check if the data of efuse and the writing data are the same.
+ for(i =0; i<4; i++)
+ {
+ tempbuffer=((pData[2*i+1]<<16)&0xffff0000)|pData[2*i];
+ DBGPRINT(RT_DEBUG_TRACE, ("buffer[%d]=%x,pData[%d]=%x,pData[%d]=%x,tempbuffer=%x\n",i,buffer[i],2*i,pData[2*i],2*i+1,pData[2*i+1],tempbuffer));
+
+ if(((buffer[i]&0xffff0000)==(pData[2*i+1]<<16))&&((buffer[i]&0xffff)==pData[2*i]))
+ bNotWrite&=TRUE;
+ else
+ {
+ bNotWrite&=FALSE;
+ break;
+ }
+ }
+ if(!bNotWrite)
+ {
+ printk("The data is not the same\n");
+
+ for(i =0; i<8; i++)
+ {
+ addr = BlkNum * 0x10 ;
+
+ InBuf[0] = addr+2*i;
+ InBuf[1] = 2;
+ InBuf[2] = pData[i];
+
+ eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 2);
+ }
+
+ }
+ else
+ return TRUE;
+ }
+
+
+
+ //Step 2. Write mapping table
+ addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+ tmpaddr = addr;
+
+ if(addr % 2 != 0)
+ addr = addr -1;
+ InBuf[0] = addr;
+ InBuf[1] = 2;
+
+ //convert the address from 10 to 8 bit ( bit7, 6 = parity and bit5 ~ 0 = bit9~4), and write to logical map entry
+ tmpOffset = Offset;
+ tmpOffset >>= 4;
+ tmpOffset |= ((~((tmpOffset & 0x01) ^ ( tmpOffset >> 1 & 0x01) ^ (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01))) << 6) & 0x40;
+ tmpOffset |= ((~( (tmpOffset >> 2 & 0x01) ^ (tmpOffset >> 3 & 0x01) ^ (tmpOffset >> 4 & 0x01) ^ ( tmpOffset >> 5 & 0x01))) << 7) & 0x80;
+
+ // write the logical address
+ if(tmpaddr%2 != 0)
+ InBuf[2] = tmpOffset<<8;
+ else
+ InBuf[2] = tmpOffset;
+
+ eFuseWritePhysical(pAd,&InBuf[0], 6, NULL, 0);
+
+ //Step 3. Compare data if not the same, invalidate the mapping entry, then re-write the data until E-fuse is exhausted
+ bWriteSuccess = TRUE;
+ for(i =0; i<8; i++)
+ {
+ addr = BlkNum * 0x10 ;
+
+ InBuf[0] = addr+2*i;
+ InBuf[1] = 2;
+ InBuf[2] = 0x0;
+
+ eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+ DBGPRINT(RT_DEBUG_TRACE, ("addr=%x, buffer[i]=%x,InBuf[2]=%x\n",InBuf[0],pData[i],InBuf[2]));
+ if(pData[i] != InBuf[2])
+ {
+ bWriteSuccess = FALSE;
+ break;
+ }
+ }
+
+ //Step 4. invlidate mapping entry and find a free mapping entry if not succeed
+
+ if (!bWriteSuccess&&Loop<2)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess BlkNum = %d\n", BlkNum));
+
+ // the offset of current mapping entry
+ addr = EFUSE_USAGE_MAP_START+BlkNum;
+
+ //find a new mapping entry
+ BlkNum = 0xffff;
+ for (i=EFUSE_USAGE_MAP_START; i<=EFUSE_USAGE_MAP_END; i+=2)
+ {
+ eFusePhysicalReadRegisters(pAd, i, 2, &LogicalAddress);
+ if( (LogicalAddress & 0xff) == 0)
+ {
+ BlkNum = i-EFUSE_USAGE_MAP_START;
+ break;
+ }
+ else if(( (LogicalAddress >> 8) & 0xff) == 0)
+ {
+ if (i != EFUSE_USAGE_MAP_END)
+ {
+ BlkNum = i+1-EFUSE_USAGE_MAP_START;
+ }
+ break;
+ }
+ }
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin::Not bWriteSuccess new BlkNum = %d\n", BlkNum));
+ if(BlkNum == 0xffff)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("eFuseWriteRegistersFromBin: out of free E-fuse space!!!\n"));
+ return FALSE;
+ }
+
+ //invalidate the original mapping entry if new entry is not found
+ tmpaddr = addr;
+
+ if(addr % 2 != 0)
+ addr = addr -1;
+ InBuf[0] = addr;
+ InBuf[1] = 2;
+
+ eFuseReadPhysical(pAd, &InBuf[0], 4, &InBuf[2], 2);
+
+ // write the logical address
+ if(tmpaddr%2 != 0)
+ {
+ // Invalidate the high byte
+ for (i=8; i<15; i++)
+ {
+ if( ( (InBuf[2] >> i) & 0x01) == 0)
+ {
+ InBuf[2] |= (0x1 <<i);
+ break;
+ }
+ }
+ }
+ else
+ {
+ // invalidate the low byte
+ for (i=0; i<8; i++)
+ {
+ if( ( (InBuf[2] >> i) & 0x01) == 0)
+ {
+ InBuf[2] |= (0x1 <<i);
+ break;
+ }
+ }
+ }
+ eFuseWritePhysical(pAd, &InBuf[0], 6, NULL, 0);
+ }
+
+ }
+ while(!bWriteSuccess&&Loop<2);
+
+ return TRUE;
}
+#endif // RT30xx //
+//2008/09/11:KH add to support efuse-->
UCHAR Wpa2Ie = IE_WPA2;
UCHAR IbssIe = IE_IBSS_PARM;
UCHAR Ccx2Ie = IE_CCX_V2;
+#ifdef RT2870
+UCHAR WapiIe = IE_WAPI;
+#endif
extern UCHAR WPA_OUI[];
{13, 247, 2, 2},
{14, 248, 2, 4},
};
+#ifndef RT30xx
#define NUM_OF_3020_CHNL (sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM))
+#endif
+#ifdef RT30xx
+//2008/07/10:KH Modified to share this variable
+UCHAR NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM));
+#endif
/*
==========================================================================
// software-based RX Antenna diversity
RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
+#ifdef RT2860
{
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE);
}
}
+#endif
} while (FALSE);
DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));
//From message type, determine which state machine I should drive
if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
{
+#ifdef RT2870
+ if (Elem->MsgType == MT2_RESET_CONF)
+ {
+ DBGPRINT_RAW(RT_DEBUG_TRACE, ("!!! reset MLME state machine !!!\n"));
+ MlmeRestartStateMachine(pAd);
+ Elem->Occupied = FALSE;
+ Elem->MsgLen = 0;
+ continue;
+ }
+#endif // RT2870 //
// if dequeue success
switch (Elem->Machine)
IN PRTMP_ADAPTER pAd)
{
BOOLEAN Cancelled;
+#ifdef RT3070
+ UINT32 TxPinCfg = 0x00050F0F;
+#endif // RT3070 //
DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));
RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
}
+#endif
}
RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
// Set LED
RTMPSetLED(pAd, LED_HALT);
RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, firmware is not done it.
+#ifdef RT2870
+ {
+ LED_CFG_STRUC LedCfg;
+ RTMP_IO_READ32(pAd, LED_CFG, &LedCfg.word);
+ LedCfg.field.LedPolar = 0;
+ LedCfg.field.RLedMode = 0;
+ LedCfg.field.GLedMode = 0;
+ LedCfg.field.YLedMode = 0;
+ RTMP_IO_WRITE32(pAd, LED_CFG, LedCfg.word);
+ }
+#endif // RT2870 //
+#ifdef RT3070
+ //
+ // Turn off LNA_PE
+ //
+ if (IS_RT3070(pAd) || IS_RT3071(pAd))
+ {
+ TxPinCfg &= 0xFFFFF0F0;
+ RTUSBWriteMACRegister(pAd, TX_PIN_CFG, TxPinCfg);
+ }
+#endif // RT3070 //
}
RTMPusecDelay(5000); // 5 msec to gurantee Ant Diversity timer canceled
ULONG TxTotalCnt;
PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext;
+#ifdef RT2860
//Baron 2008/07/10
//printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus));
//If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0.
}
}
}
+#endif /* RT2860 */
// Do nothing if the driver is starting halt state.
// This might happen when timer already been fired before cancel timer with mlmehalt
fRTMP_ADAPTER_RESET_IN_PROGRESS))))
return;
+#ifdef RT2860
{
if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE))
{
AsicResetFromDMABusy(pAd);
}
}
-
+#endif /* RT2860 */
RT28XX_MLME_PRE_SANITY_CHECK(pAd);
{
// RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
pAd->Mlme.PeriodicRound ++;
+#ifdef RT3070
+ // execute every 100ms, update the Tx FIFO Cnt for update Tx Rate.
+ NICUpdateFifoStaCounters(pAd);
+#endif // RT3070 //
// execute every 500ms
if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
{
// the dynamic tuning mechanism below are based on most up-to-date information
NICUpdateRawCounters(pAd);
+#ifdef RT2870
+ RT2870_WatchDog(pAd);
+#endif // RT2870 //
+
// Need statistics after read counter. So put after NICUpdateRawCounters
ORIBATimerTimeout(pAd);
pAd->RalinkCounters.OneSecTxRetryOkCount +
pAd->RalinkCounters.OneSecTxFailCount;
+ // dynamic adjust antenna evaluation period according to the traffic
if (TxTotalCnt > 50)
{
if (pAd->Mlme.OneSecPeriodicRound % 10 == 0)
MlmeResetRalinkCounters(pAd);
{
+#ifdef RT2860
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE))
+#endif
{
// When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
// and sending CTS-to-self over and over.
RT28XX_MLME_HANDLER(pAd);
}
-
pAd->bUpdateBcnCntDone = FALSE;
}
VOID STAMlmePeriodicExec(
PRTMP_ADAPTER pAd)
{
+#ifdef RT2860
ULONG TxTotalCnt;
+#endif
+#ifdef RT2870
+ ULONG TxTotalCnt;
+ int i;
+#endif
if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
{
pAd->StaCfg.bBlockAssoc = FALSE;
}
+#ifdef RT2860
//Baron 2008/07/10
//printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus));
//If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0.
{
pAd->StaCfg.WpaSupplicantUP = 1;
}
+#endif
if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent))
{
pAd->PreMediaState = pAd->IndicateMediaState;
}
+#ifdef RT2860
if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) &&
(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
(pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) &&
{
RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
}
+#endif
}
else if (ADHOC_ON(pAd))
{
+#ifdef RT2860
// 2003-04-17 john. this is a patch that driver forces a BEACON out if ASIC fails
// the "TX BEACON competition" for the entire past 1 sec.
// So that even when ASIC's BEACONgen engine been blocked
pAd->StaCfg.Adhoc20NJoined = FALSE;
}
}
+#endif /* RT2860 */
//radar detect
if ((pAd->CommonCfg.Channel > 14)
MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
}
+
+#ifdef RT2870
+ for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
+ {
+ MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i];
+
+ if (pEntry->ValidAsCLI == FALSE)
+ continue;
+
+ if (pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME < pAd->Mlme.Now32)
+ MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);
+ }
+#endif
}
else // no INFRA nor ADHOC connection
{
if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
{
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
+#ifdef RT2860
!pAd->StaCfg.AdhocBOnlyJoined &&
!pAd->StaCfg.AdhocBGJoined &&
(pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
+#endif
+#ifdef RT2870
+ (pEntry->HTCapability.MCSSet[0] == 0xff) &&
+ ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
+#endif
{// 11N 1S Adhoc
*ppTable = RateSwitchTable11N1S;
*pTableSize = RateSwitchTable11N1S[0];
}
else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
+#ifdef RT2860
!pAd->StaCfg.AdhocBOnlyJoined &&
!pAd->StaCfg.AdhocBGJoined &&
(pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
(pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) &&
+#endif
+#ifdef RT2870
+ (pEntry->HTCapability.MCSSet[0] == 0xff) &&
+ (pEntry->HTCapability.MCSSet[1] == 0xff) &&
+#endif
(pAd->Antenna.field.TxPath == 2))
{// 11N 2S Adhoc
if (pAd->LatchRfRegs.Channel <= 14)
}
else
+#ifdef RT2860
if (pAd->CommonCfg.PhyMode == PHY_11B)
{
*ppTable = RateSwitchTable11B;
}
else if((pAd->LatchRfRegs.Channel <= 14) && (pAd->StaCfg.AdhocBOnlyJoined == TRUE))
+#endif
+#ifdef RT2870
+ if ((pEntry->RateLen == 4)
+ && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
+ )
+#endif
{
// USe B Table when Only b-only Station in my IBSS .
*ppTable = RateSwitchTable11B;
//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen == 4)
+#ifndef RT30xx
+//Iverson mark for Adhoc b mode,sta will use rate 54 Mbps when connect with sta b/g/n mode
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
+#endif
)
{// B only AP
*ppTable = RateSwitchTable11B;
if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls))
{
+#ifdef RT2860
Rssi = RTMPMaxRssi(pAd, (CHAR)pAd->StaCfg.RssiSample.AvgRssi0, (CHAR)pAd->StaCfg.RssiSample.AvgRssi1, (CHAR)pAd->StaCfg.RssiSample.AvgRssi2);
+#endif
+#ifdef RT2870
+ Rssi = RTMPMaxRssi(pAd,
+ pAd->StaCfg.RssiSample.AvgRssi0,
+ pAd->StaCfg.RssiSample.AvgRssi1,
+ pAd->StaCfg.RssiSample.AvgRssi2);
+#endif
// Update statistic counter
RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
}
else
{
+#ifdef RT2860
Rssi = RTMPMaxRssi(pAd, (CHAR)pEntry->RssiSample.AvgRssi0, (CHAR)pEntry->RssiSample.AvgRssi1, (CHAR)pEntry->RssiSample.AvgRssi2);
+#endif
+#ifdef RT2870
+ if (INFRA_ON(pAd) && (i == 1))
+ Rssi = RTMPMaxRssi(pAd,
+ pAd->StaCfg.RssiSample.AvgRssi0,
+ pAd->StaCfg.RssiSample.AvgRssi1,
+ pAd->StaCfg.RssiSample.AvgRssi2);
+ else
+ Rssi = RTMPMaxRssi(pAd,
+ pEntry->RssiSample.AvgRssi0,
+ pEntry->RssiSample.AvgRssi1,
+ pEntry->RssiSample.AvgRssi2);
+#endif
TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
pEntry->OneSecTxRetryOkCount +
UCHAR UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
ULONG TxTotalCnt;
ULONG TxErrorRatio = 0;
+#ifdef RT2860
BOOLEAN bTxRateChanged = TRUE; //, bUpgradeQuality = FALSE;
+#endif
+#ifdef RT2870
+ BOOLEAN bTxRateChanged; //, bUpgradeQuality = FALSE;
+#endif
PRTMP_TX_RATE_SWITCH pCurrTxRate, pNextTxRate = NULL;
PUCHAR pTable;
UCHAR TableSize = 0;
if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
continue;
+#ifdef RT2860
//Rssi = RTMPMaxRssi(pAd, (CHAR)pAd->StaCfg.AvgRssi0, (CHAR)pAd->StaCfg.AvgRssi1, (CHAR)pAd->StaCfg.AvgRssi2);
if (pAd->Antenna.field.TxPath > 1)
Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
else
Rssi = pAd->StaCfg.RssiSample.AvgRssi0;
+#endif
+#ifdef RT2870
+ if (INFRA_ON(pAd) && (i == 1))
+ Rssi = RTMPMaxRssi(pAd,
+ pAd->StaCfg.RssiSample.AvgRssi0,
+ pAd->StaCfg.RssiSample.AvgRssi1,
+ pAd->StaCfg.RssiSample.AvgRssi2);
+ else
+ Rssi = RTMPMaxRssi(pAd,
+ pEntry->RssiSample.AvgRssi0,
+ pEntry->RssiSample.AvgRssi1,
+ pEntry->RssiSample.AvgRssi2);
+#endif
CurrRateIdx = pAd->CommonCfg.TxRateIndex;
pAd->DrsCounters.TxRateUpPenalty = 0;
NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
+#ifdef RT2870
+ bTxRateChanged = TRUE;
+#endif
}
// if rate-down happen, only clear DownRate's bad history
else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx)
pAd->DrsCounters.TxRateUpPenalty = 0; // no penalty
pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0;
pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
+#ifdef RT2870
+ bTxRateChanged = TRUE;
+#endif
}
else
{
if (INFRA_ON(pAd) &&
(PowerMode != Ndis802_11PowerModeCAM) &&
(pAd->StaCfg.Psm == PWR_ACTIVE) &&
+#ifdef RT2860
RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP))
+#endif
+#if !defined(RT2860) && !defined(RT30xx)
+ (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
+#endif
+#ifndef RT30xx
{
NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
pAd->RalinkCounters.RxCountSinceLastNULL = 0;
RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
}
}
+#endif
+#ifdef RT30xx
+// (! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+ (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) /*&&
+ (pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
+ (pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/)
+ {
+ // add by johnli, use Rx OK data count per second to calculate throughput
+ // If Ttraffic is too high ( > 400 Rx per second), don't go to sleep mode. If tx rate is low, use low criteria
+ // Mode=CCK/MCS=3 => 11 Mbps, Mode=OFDM/MCS=3 => 18 Mbps
+ if (((pAd->StaCfg.HTPhyMode.field.MCS <= 3) &&
+/* Iverson mark
+ (pAd->StaCfg.HTPhyMode.field.MODE <= MODE_OFDM) &&
+*/
+ (pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)100)) ||
+ ((pAd->StaCfg.HTPhyMode.field.MCS > 3) &&
+/* Iverson mark
+ (pAd->StaCfg.HTPhyMode.field.MODE > MODE_OFDM) &&
+*/
+ (pAd->RalinkCounters.OneSecRxOkDataCnt < (ULONG)400)))
+ {
+ // Get this time
+ NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
+ pAd->RalinkCounters.RxCountSinceLastNULL = 0;
+ MlmeSetPsmBit(pAd, PWR_SAVE);
+ if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
+ {
+ RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
+ }
+ else
+ {
+ RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
+ }
+ }
+ }
+#endif
}
// IRQL = PASSIVE_LEVEL
RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
+#ifndef RT30xx
DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
+#endif
}
// IRQL = DISPATCH_LEVEL
}
else
{
+#ifdef RT30xx
+ /* avoid Hidden SSID form beacon to overwirite correct SSID from probe response */
+ if ((SSID_EQUAL(Ssid, SsidLen, Tab->BssEntry[Idx].Ssid, Tab->BssEntry[Idx].SsidLen)) ||
+ (NdisEqualMemory(Tab->BssEntry[Idx].Ssid, ZeroSsid, Tab->BssEntry[Idx].SsidLen)))
+ {
+#endif
BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
+#ifdef RT30xx
+ }
+#endif
}
return Idx;
continue;
// check group cipher
+#ifndef RT30xx
if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
+#endif
+#ifdef RT30xx
+ if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
+#endif
continue;
// check pairwise cipher, skip if none matched
continue;
// check group cipher
+#ifndef RT30xx
if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
+#endif
+#ifdef RT30xx
+ if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
+#endif
continue;
// check pairwise cipher, skip if none matched
switch (*pTmp)
{
case 1:
+#ifndef RT30xx
pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled;
break;
case 5:
pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled;
+#endif
+#ifdef RT30xx
+ case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
+ pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
+#endif
break;
case 2:
pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
pBss->AuthMode = Ndis802_11AuthModeWPANone;
pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
pBss->WepStatus = pBss->WPA.GroupCipher;
- // Patched bugs for old driver
if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
}
switch (pCipher->Type)
{
case 1:
+#ifndef RT30xx
pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled;
break;
case 5:
pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled;
+#endif
+#ifdef RT30xx
+ case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
+ pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled;
+#endif
break;
case 2:
pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux;
pBss->WPA.GroupCipher = pBss->WPA2.GroupCipher;
pBss->WepStatus = pBss->WPA.GroupCipher;
- // Patched bugs for old driver
if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
}
VOID MlmeRestartStateMachine(
IN PRTMP_ADAPTER pAd)
{
+#ifdef RT2860
MLME_QUEUE_ELEM *Elem = NULL;
+#endif
BOOLEAN Cancelled;
DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
+#ifdef RT2860
NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
if(pAd->Mlme.bRunning)
{
DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n"));
}
}
+#endif /* RT2860 */
{
// Cancel all timer events
pAd->Mlme.ActMachine.CurrState = ACT_IDLE;
}
+#ifdef RT2860
// Remove running state
NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
pAd->Mlme.bRunning = FALSE;
NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
+#endif
}
/*! \brief test if the MLME Queue is empty
}
}
+#ifdef RT30xx
+/*
+ ========================================================================
+
+ Routine Description: Write RT30xx RF register through MAC
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+NTSTATUS RT30xxWriteRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR RegID,
+ IN UCHAR Value)
+{
+ RF_CSR_CFG_STRUC rfcsr;
+ UINT i = 0;
+
+ do
+ {
+ RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+ if (!rfcsr.field.RF_CSR_KICK)
+ break;
+ i++;
+ }
+ while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));
+
+ if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+ {
+ DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
+ return STATUS_UNSUCCESSFUL;
+ }
+
+ rfcsr.field.RF_CSR_WR = 1;
+ rfcsr.field.RF_CSR_KICK = 1;
+ rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
+ rfcsr.field.RF_CSR_DATA = Value;
+
+ RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
+
+ return STATUS_SUCCESS;
+}
+
+
+/*
+ ========================================================================
+
+ Routine Description: Read RT30xx RF register through MAC
+
+ Arguments:
+
+ Return Value:
+
+ IRQL =
+
+ Note:
+
+ ========================================================================
+*/
+NTSTATUS RT30xxReadRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR RegID,
+ IN PUCHAR pValue)
+{
+ RF_CSR_CFG_STRUC rfcsr;
+ UINT i=0, k=0;
+
+ for (i=0; i<MAX_BUSY_COUNT; i++)
+ {
+ RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+ if (rfcsr.field.RF_CSR_KICK == BUSY)
+ {
+ continue;
+ }
+ rfcsr.word = 0;
+ rfcsr.field.RF_CSR_WR = 0;
+ rfcsr.field.RF_CSR_KICK = 1;
+ rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
+ RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
+ for (k=0; k<MAX_BUSY_COUNT; k++)
+ {
+ RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);
+
+ if (rfcsr.field.RF_CSR_KICK == IDLE)
+ break;
+ }
+ if ((rfcsr.field.RF_CSR_KICK == IDLE) &&
+ (rfcsr.field.TESTCSR_RFACC_REGNUM == RegID))
+ {
+ *pValue = (UCHAR)rfcsr.field.RF_CSR_DATA;
+ break;
+ }
+ }
+ if (rfcsr.field.RF_CSR_KICK == BUSY)
+ {
+ DBGPRINT_ERR(("RF read R%d=0x%x fail, i[%d], k[%d]\n", RegID, rfcsr.word,i,k));
+ return STATUS_UNSUCCESSFUL;
+ }
+
+ return STATUS_SUCCESS;
+}
+#endif // RT30xx //
+
+#ifdef RT30xx
+// add by johnli, RF power sequence setup
+/*
+ ==========================================================================
+ Description:
+
+ Load RF normal operation-mode setup
+
+ ==========================================================================
+ */
+VOID RT30xxLoadRFNormalModeSetup(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR RFValue;
+
+ // RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
+ RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+ RFValue = (RFValue & (~0x0C)) | 0x31;
+ RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+ // TX_LO2_en, RF R15 register Bit 3 to 0
+ RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
+ RFValue &= (~0x08);
+ RT30xxWriteRFRegister(pAd, RF_R15, RFValue);
+
+ // TX_LO1_en, RF R17 register Bit 3 to 0
+ RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
+ RFValue &= (~0x08);
+ // to fix rx long range issue
+ if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
+ {
+ RFValue |= 0x20;
+ }
+ RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
+
+ // RX_LO1_en, RF R20 register Bit 3 to 0
+ RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
+ RFValue &= (~0x08);
+ RT30xxWriteRFRegister(pAd, RF_R20, RFValue);
+
+ // RX_LO2_en, RF R21 register Bit 3 to 0
+ RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+ RFValue &= (~0x08);
+ RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+ // LDORF_VC, RF R27 register Bit 2 to 0
+ RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+ if ((pAd->MACVersion & 0xffff) < 0x0211)
+ RFValue = (RFValue & (~0x77)) | 0x3;
+ else
+ RFValue = (RFValue & (~0x77));
+ RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+ /* end johnli */
+}
+
+/*
+ ==========================================================================
+ Description:
+
+ Load RF sleep-mode setup
+
+ ==========================================================================
+ */
+VOID RT30xxLoadRFSleepModeSetup(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR RFValue;
+ UINT32 MACValue;
+
+ // RF_BLOCK_en. RF R1 register Bit 0 to 0
+ RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+ RFValue &= (~0x01);
+ RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+ // VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
+ RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+ RFValue &= (~0x30);
+ RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+ // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
+ RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+ RFValue &= (~0x0E);
+ RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+ // RX_CTB_en, RF R21 register Bit 7 to 0
+ RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+ RFValue &= (~0x80);
+ RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+ // LDORF_VC, RF R27 register Bit 0, Bit 1 & Bit 2 to 1
+ RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+ RFValue |= 0x77;
+ RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+
+ RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+ MACValue |= 0x1D000000;
+ RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+}
+
+/*
+ ==========================================================================
+ Description:
+
+ Reverse RF sleep-mode setup
+
+ ==========================================================================
+ */
+VOID RT30xxReverseRFSleepModeSetup(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR RFValue;
+ UINT32 MACValue;
+
+ // RF_BLOCK_en, RF R1 register Bit 0 to 1
+ RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+ RFValue |= 0x01;
+ RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+ // VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
+ RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+ RFValue |= 0x30;
+ RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+ // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
+ RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
+ RFValue |= 0x0E;
+ RT30xxWriteRFRegister(pAd, RF_R09, RFValue);
+
+ // RX_CTB_en, RF R21 register Bit 7 to 1
+ RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
+ RFValue |= 0x80;
+ RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
+
+ // LDORF_VC, RF R27 register Bit 2 to 0
+ RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
+ if ((pAd->MACVersion & 0xffff) < 0x0211)
+ RFValue = (RFValue & (~0x77)) | 0x3;
+ else
+ RFValue = (RFValue & (~0x77));
+ RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
+
+ // RT3071 version E has fixed this issue
+ if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+ {
+ // patch tx EVM issue temporarily
+ RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+ MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
+ RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+ }
+ else
+ {
+ RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
+ MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000);
+ RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
+ }
+}
+// end johnli
+#endif // RT30xx //
+
/*
==========================================================================
Description:
RTMP_RF_REGS *RFRegTable;
// Search Tx power value
+#ifdef RT30xx
+ // We can't use ChannelList to search channel, since some central channl's txpowr doesn't list
+ // in ChannelList, so use TxPower array instead.
+ //
+ for (index = 0; index < MAX_NUM_OF_CHANNELS; index++)
+ {
+ if (Channel == pAd->TxPower[index].Channel)
+ {
+ TxPwer = pAd->TxPower[index].Power;
+ TxPwer2 = pAd->TxPower[index].Power2;
+ break;
+ }
+ }
+#endif
+#ifndef RT30xx
for (index = 0; index < pAd->ChannelListNum; index++)
{
if (Channel == pAd->ChannelList[index].Channel)
break;
}
}
+#endif
if (index == MAX_NUM_OF_CHANNELS)
{
+#ifndef RT30xx
DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Cant find the Channel#%d \n", Channel));
+#endif
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_ERROR, ("AsicSwitchChannel: Can't find the Channel#%d \n", Channel));
+#endif
}
+#ifdef RT2870
+ // The RF programming sequence is difference between 3xxx and 2xxx
+#ifdef RT30xx
+ if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020) ||
+ (pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022)))
+#endif
+#ifndef RT30xx
+ if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
+#endif
+ {
+ /* modify by WY for Read RF Reg. error */
+ UCHAR RFValue;
+
+ for (index = 0; index < NUM_OF_3020_CHNL; index++)
+ {
+ if (Channel == FreqItems3020[index].Channel)
+ {
+ // Programming channel parameters
+ RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
+ RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
+
+#ifndef RT30xx
+ RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue);
+ RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
+ RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue);
+
+ // Set Tx Power
+ RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
+ RFValue = (RFValue & 0xE0) | TxPwer;
+ RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
+
+ // Set RF offset
+ RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
+ RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
+ RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
+#endif
+#ifdef RT30xx
+ RT30xxReadRFRegister(pAd, RF_R06, &RFValue);
+ RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
+ RT30xxWriteRFRegister(pAd, RF_R06, RFValue);
+
+ // Set Tx0 Power
+ RT30xxReadRFRegister(pAd, RF_R12, &RFValue);
+ RFValue = (RFValue & 0xE0) | TxPwer;
+ RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
+
+ // Set Tx1 Power
+ RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
+ RFValue = (RFValue & 0xE0) | TxPwer2;
+ RT30xxWriteRFRegister(pAd, RF_R13, RFValue);
+
+ // Tx/Rx Stream setting
+ RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
+ //if (IS_RT3090(pAd))
+ // RFValue |= 0x01; // Enable RF block.
+ RFValue &= 0x03; //clear bit[7~2]
+ if (pAd->Antenna.field.TxPath == 1)
+ RFValue |= 0xA0;
+ else if (pAd->Antenna.field.TxPath == 2)
+ RFValue |= 0x80;
+ if (pAd->Antenna.field.RxPath == 1)
+ RFValue |= 0x50;
+ else if (pAd->Antenna.field.RxPath == 2)
+ RFValue |= 0x40;
+ RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
+
+ // Set RF offset
+ RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
+ RFValue = (RFValue & 0x80) | pAd->RfFreqOffset;
+ RT30xxWriteRFRegister(pAd, RF_R23, RFValue);
+#endif
+
+ // Set BW
+ if (!bScan && (pAd->CommonCfg.BBPCurrentBW == BW_40))
+ {
+ RFValue = pAd->Mlme.CaliBW40RfR24;
+ //DISABLE_11N_CHECK(pAd);
+ }
+ else
+ {
+ RFValue = pAd->Mlme.CaliBW20RfR24;
+ }
+#ifndef RT30xx
+ RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue);
+
+ // Enable RF tuning
+ RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue);
+ RFValue = RFValue | 0x1;
+ RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue);
+
+ // latch channel for future usage.
+ pAd->LatchRfRegs.Channel = Channel;
+#endif
+#ifdef RT30xx
+ RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
+ RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
+
+ // Enable RF tuning
+ RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
+ RFValue = RFValue | 0x1;
+ RT30xxWriteRFRegister(pAd, RF_R07, RFValue);
+
+ // latch channel for future usage.
+ pAd->LatchRfRegs.Channel = Channel;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
+ Channel,
+ pAd->RfIcType,
+ TxPwer,
+ TxPwer2,
+ pAd->Antenna.field.TxPath,
+ FreqItems3020[index].N,
+ FreqItems3020[index].K,
+ FreqItems3020[index].R));
+#endif
+
+ break;
+ }
+ }
+
+#ifndef RT30xx
+ DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
+ Channel,
+ pAd->RfIcType,
+ TxPwer,
+ TxPwer2,
+ pAd->Antenna.field.TxPath,
+ FreqItems3020[index].N,
+ FreqItems3020[index].K,
+ FreqItems3020[index].R));
+#endif
+ }
+ else
+#endif // RT2870 //
{
RFRegTable = RF2850RegTable;
IN PRTMP_ADAPTER pAd,
IN UCHAR Channel)
{
+#ifdef RT30xx
+ if (pAd->Mlme.OneSecPeriodicRound % 2 == 1)
+ {
+ // patch for AsicSetRxAnt failed
+ pAd->RxAnt.EvaluatePeriod = 0;
+
+ // check every 2 second. If rcv-beacon less than 5 in the past 2 second, then AvgRSSI is no longer a
+ // valid indication of the distance between this AP and its clients.
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+ {
+ SHORT realavgrssi1;
+
+ // if no traffic then reset average rssi to trigger evaluation
+ if (pAd->StaCfg.NumOfAvgRssiSample < 5)
+ {
+ pAd->RxAnt.Pair1LastAvgRssi = (-99);
+ pAd->RxAnt.Pair2LastAvgRssi = (-99);
+ DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no traffic/beacon, reset RSSI\n"));
+ }
+
+ pAd->StaCfg.NumOfAvgRssiSample = 0;
+ realavgrssi1 = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3);
+
+ DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi1, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt));
+
+ // if the difference between two rssi is larger or less than 5, then evaluate the other antenna
+ if ((pAd->RxAnt.EvaluateStableCnt < 2) || (realavgrssi1 > (pAd->RxAnt.Pair1LastAvgRssi + 5)) || (realavgrssi1 < (pAd->RxAnt.Pair1LastAvgRssi - 5)))
+ {
+ pAd->RxAnt.Pair1LastAvgRssi = realavgrssi1;
+ AsicEvaluateRxAnt(pAd);
+ }
+ }
+ else
+ {
+ // if not connected, always switch antenna to try to connect
+ UCHAR temp;
+
+ temp = pAd->RxAnt.Pair1PrimaryRxAnt;
+ pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
+ pAd->RxAnt.Pair1SecondaryRxAnt = temp;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("MlmePeriodicExec: no connect, switch to another one to try connection\n"));
+
+ AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+ }
+ }
+#endif /* RT30xx */
}
/*
ULONG TxPwr[5];
CHAR Value;
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
|| (pAd->bPCIclkOff == TRUE)
|| RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)
|| RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
return;
+#endif
if (pAd->CommonCfg.BBPCurrentBW == BW_40)
{
*/
VOID AsicForceWakeup(
IN PRTMP_ADAPTER pAd,
+#ifdef RT2860
IN UCHAR Level)
+#endif
+#ifdef RT2870
+ IN BOOLEAN bFromTx)
+#endif
{
DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
+#ifdef RT2860
RT28XX_STA_FORCE_WAKEUP(pAd, Level);
+#endif
+#ifdef RT2870
+ RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
+#endif
}
/*
csr9.field.bTsfTicking = 0;
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
+#ifdef RT2860
// move BEACON TXD and frame content to on-chip memory
ptr = (PUCHAR)&pAd->BeaconTxWI;
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
ptr +=4;
}
+#endif
+#ifdef RT2870
+ // move BEACON TXD and frame content to on-chip memory
+ ptr = (PUCHAR)&pAd->BeaconTxWI;
+ for (i=0; i<TXWI_SIZE; i+=2) // 16-byte TXWI field
+ {
+ RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + i, ptr, 2);
+ ptr += 2;
+ }
+
+ // start right after the 16-byte TXWI field
+ ptr = pAd->BeaconBuf;
+ for (i=0; i< pAd->BeaconTxWI.MPDUtotalByteCount; i+=2)
+ {
+ RTUSBMultiWrite(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, ptr, 2);
+ ptr +=2;
+ }
+#endif // RT2870 //
// start sending BEACON
csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
Ac2Cfg.field.Aifsn -= 1;
// Tuning for TGn Wi-Fi 5.2.32
- // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+ // STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
if (STA_TGN_WIFI_ON(pAd) &&
pEdcaParm->Aifsn[QID_AC_VI] == 10)
{
Ac0Cfg.field.Aifsn = 3;
Ac2Cfg.field.AcTxop = 5;
}
+
+#ifdef RT30xx
+ if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
+ {
+ // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
+ Ac2Cfg.field.Aifsn = 5;
+ }
+#endif // RT30xx //
}
Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn - 4;
// Tuning for TGn Wi-Fi 5.2.32
- // STA TestBed changes in this item: conexant legacy sta ==> broadcom 11n sta
+ // STA TestBed changes in this item: connexant legacy sta ==> broadcom 11n sta
if (STA_TGN_WIFI_ON(pAd) &&
pEdcaParm->Aifsn[QID_AC_VI] == 10)
{
AifsnCsr.field.Aifsn0 = 3;
AifsnCsr.field.Aifsn2 = 7;
}
+#ifdef RT2870
+ if (INFRA_ON(pAd))
+ CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE);
+#endif
}
AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
+#ifdef RT30xx
+ if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
+ AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
+#endif // RT30xx //
RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
SlotTime = (bUseShortSlotTime)? 9 : 20;
{
+#ifndef RT30xx
// force using short SLOT time for FAE to demo performance when TxBurst is ON
if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))
// And we will not set to short slot when bEnableTxBurst is TRUE.
}
else if (pAd->CommonCfg.bEnableTxBurst)
+#endif
+#ifdef RT30xx
+ if (pAd->CommonCfg.bEnableTxBurst)
+#endif
SlotTime = 9;
}
{
ULONG offset; //, csr0;
SHAREDKEY_MODE_STRUC csr1;
+#ifdef RT2860
INT i;
+#endif
DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx));
//============================================================================================
//
// fill key material - key + TX MIC + RX MIC
//
+
offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE;
+#ifdef RT2860
for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
}
-
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_SHARE_KEY);
+#endif
offset += MAX_LEN_OF_SHARE_KEY;
if (pTxMic)
{
+#ifdef RT2860
for (i=0; i<8; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, pTxMic, 8);
+#endif
}
offset += 8;
if (pRxMic)
{
+#ifdef RT2860
for (i=0; i<8; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, pRxMic, 8);
+#endif
}
PUCHAR pTxtsc = pCipherKey->TxTsc;
UCHAR CipherAlg = pCipherKey->CipherAlg;
SHAREDKEY_MODE_STRUC csr1;
+#ifdef RT2860
UCHAR i;
+#endif
DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
//
// 2.) Set Key to Asic
//
//for (i = 0; i < KeyLen; i++)
+#ifdef RT2860
for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, pKey, MAX_LEN_OF_PEER_KEY);
+#endif
offset += MAX_LEN_OF_PEER_KEY;
//
//
if (pTxMic)
{
+#ifdef RT2860
for (i = 0; i < 8; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pTxMic[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, pTxMic, 8);
+#endif
}
offset += LEN_TKIP_TXMICK;
if (pRxMic)
{
+#ifdef RT2860
for (i = 0; i < 8; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, pRxMic, 8);
+#endif
}
//
if (bTxKey)
{
+#ifdef RT2860
offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
//
// Write IV
RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]);
}
+#endif
+#ifdef RT2870
+ UINT32 tmpVal;
+
+ //
+ // Write IV
+ //
+ IV4 = (KeyIdx << 6);
+ if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) ||(CipherAlg == CIPHER_AES))
+ IV4 |= 0x20; // turn on extension bit means EIV existence
+
+ tmpVal = pTxtsc[1] + (((pTxtsc[1] | 0x20) & 0x7f) << 8) + (pTxtsc[0] << 16) + (IV4 << 24);
+ RTMP_IO_WRITE32(pAd, offset, tmpVal);
+
+ //
+ // Write EIV
+ //
+ offset += 4;
+ RTMP_IO_WRITE32(pAd, offset, *(PUINT32)&pCipherKey->TxTsc[2]);
+#endif // RT2870 //
AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable);
}
// EKEY
offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
+#ifdef RT2860
for (i=0; i<MAX_LEN_OF_PEER_KEY; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, &pCipherKey->Key[0], MAX_LEN_OF_PEER_KEY);
+#endif // RT2870 //
for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4)
{
UINT32 Value;
// MIC KEY
if (pTxMic)
{
+#ifdef RT2860
for (i=0; i<8; i++)
{
RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, &pCipherKey->TxMic[0], 8);
+#endif // RT2870 //
}
offset += 8;
if (pRxMic)
{
+#ifdef RT2860
for (i=0; i<8; i++)
{
RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]);
}
+#endif
+#ifdef RT2870
+ RTUSBMultiWrite(pAd, offset, &pCipherKey->RxMic[0], 8);
+#endif // RT2870 //
}
DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg]));
if (i >= 100)
{
{
+#ifdef RT2860
UINT32 Data;
// Reset DMA
RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
Data &= 0xfffffffd;
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+#endif /* RT2860 */
DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
}
//return FALSE;
+#ifdef RT2870
+ return FALSE;
+#endif
}
H2MMailbox.field.Owner = 1; // pass ownership to MCU
return TRUE;
}
+#ifdef RT2860
BOOLEAN AsicCheckCommanOk(
IN PRTMP_ADAPTER pAd,
IN UCHAR Command)
return FALSE;
}
+#endif /* RT8260 */
/*
========================================================================
return larger;
}
+#ifdef RT30xx
+// Antenna divesity use GPIO3 and EESK pin for control
+// Antenna and EEPROM access are both using EESK pin,
+// Therefor we should avoid accessing EESK at the same time
+// Then restore antenna after EEPROM access
+VOID AsicSetRxAnt(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Ant)
+{
+#ifdef RT30xx
+ UINT32 Value;
+ UINT32 x;
+
+ if ((pAd->EepromAccess) ||
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
+ {
+ return;
+ }
+
+ // the antenna selection is through firmware and MAC register(GPIO3)
+ if (Ant == 0)
+ {
+ // Main antenna
+ RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+ x |= (EESK);
+ RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+
+ RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+ Value &= ~(0x0808);
+ RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+ DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
+ }
+ else
+ {
+ // Aux antenna
+ RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
+ x &= ~(EESK);
+ RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
+
+ RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
+ Value &= ~(0x0808);
+ Value |= 0x08;
+ RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
+ DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
+ }
+#endif // RT30xx //
+}
+#endif /* RT30xx */
+
/*
========================================================================
Routine Description:
{
UCHAR BBPR3 = 0;
+#ifndef RT30xx
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS |
fRTMP_ADAPTER_HALT_IN_PROGRESS |
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+#ifdef RT2860
pAd->StaCfg.BBPR3 = BBPR3;
+#endif
+#ifdef RT2870
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
+ )
+ {
+ ULONG TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
+ pAd->RalinkCounters.OneSecTxRetryOkCount +
+ pAd->RalinkCounters.OneSecTxFailCount;
+
+ if (TxTotalCnt > 50)
+ {
+ RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
+ pAd->Mlme.bLowThroughput = FALSE;
+ }
+ else
+ {
+ RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
+ pAd->Mlme.bLowThroughput = TRUE;
+ }
+ }
+#endif
+#endif /* RT30xx */
+#ifdef RT30xx
+ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS |
+ fRTMP_ADAPTER_HALT_IN_PROGRESS |
+ fRTMP_ADAPTER_RADIO_OFF |
+ fRTMP_ADAPTER_NIC_NOT_EXIST |
+ fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) ||
+ OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+#ifdef RT30xx
+ || (pAd->EepromAccess)
+#endif // RT30xx //
+ )
+ return;
+
+
+ {
+ //if (pAd->StaCfg.Psm == PWR_SAVE)
+ // return;
+ }
+
+ // two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove
+ // one is antenna diversity:there is only one antenna can rx and tx
+ // the other is failed antenna remove:two physical antenna can rx and tx
+ if (pAd->NicConfig2.field.AntDiversity)
+ {
+ DBGPRINT(RT_DEBUG_TRACE,("AntDiv - before evaluate Pair1-Ant (%d,%d)\n",
+ pAd->RxAnt.Pair1PrimaryRxAnt, pAd->RxAnt.Pair1SecondaryRxAnt));
+
+ AsicSetRxAnt(pAd, pAd->RxAnt.Pair1SecondaryRxAnt);
+
+ pAd->RxAnt.EvaluatePeriod = 1; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
+ pAd->RxAnt.FirstPktArrivedWhenEvaluate = FALSE;
+ pAd->RxAnt.RcvPktNumWhenEvaluate = 0;
+
+ // a one-shot timer to end the evalution
+ // dynamic adjust antenna evaluation period according to the traffic
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+ RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 100);
+ else
+ RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
+ }
+ else
+ {
+ if (pAd->StaCfg.Psm == PWR_SAVE)
+ return;
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
+ BBPR3 &= (~0x18);
+ if(pAd->Antenna.field.RxPath == 3)
+ {
+ BBPR3 |= (0x10);
+ }
+ else if(pAd->Antenna.field.RxPath == 2)
+ {
+ BBPR3 |= (0x8);
+ }
+ else if(pAd->Antenna.field.RxPath == 1)
+ {
+ BBPR3 |= (0x0);
+ }
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+ }
+#endif /* RT30xx */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
)
pAd->RalinkCounters.OneSecTxRetryOkCount +
pAd->RalinkCounters.OneSecTxFailCount;
+ // dynamic adjust antenna evaluation period according to the traffic
if (TxTotalCnt > 50)
{
RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
UCHAR BBPR3 = 0;
CHAR larger = -127, rssi0, rssi1, rssi2;
+#ifndef RT30xx
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
BBPR3 |= (0x0);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+#ifdef RT2860
pAd->StaCfg.BBPR3 = BBPR3;
+#endif
}
+#endif /* RT30xx */
+#ifdef RT30xx
+ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS |
+ fRTMP_ADAPTER_HALT_IN_PROGRESS |
+ fRTMP_ADAPTER_RADIO_OFF |
+ fRTMP_ADAPTER_NIC_NOT_EXIST) ||
+ OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+#ifdef RT30xx
+ || (pAd->EepromAccess)
+#endif // RT30xx //
+ )
+ return;
+
+ {
+ //if (pAd->StaCfg.Psm == PWR_SAVE)
+ // return;
+
+ if (pAd->NicConfig2.field.AntDiversity)
+ {
+ if ((pAd->RxAnt.RcvPktNumWhenEvaluate != 0) && (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >= pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt]))
+ {
+ UCHAR temp;
+
+ //
+ // select PrimaryRxAntPair
+ // Role change, Used Pair1SecondaryRxAnt as PrimaryRxAntPair.
+ // Since Pair1SecondaryRxAnt Quality good than Pair1PrimaryRxAnt
+ //
+ temp = pAd->RxAnt.Pair1PrimaryRxAnt;
+ pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
+ pAd->RxAnt.Pair1SecondaryRxAnt = temp;
+
+ pAd->RxAnt.Pair1LastAvgRssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >> 3);
+ pAd->RxAnt.EvaluateStableCnt = 0;
+ }
+ else
+ {
+ // if the evaluated antenna is not better than original, switch back to original antenna
+ AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+ pAd->RxAnt.EvaluateStableCnt ++;
+ }
+
+ pAd->RxAnt.EvaluatePeriod = 0; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
+
+ DBGPRINT(RT_DEBUG_TRACE,("AsicRxAntEvalAction::After Eval(fix in #%d), <%d, %d>, RcvPktNumWhenEvaluate=%ld\n",
+ pAd->RxAnt.Pair1PrimaryRxAnt, (pAd->RxAnt.Pair1AvgRssi[0] >> 3), (pAd->RxAnt.Pair1AvgRssi[1] >> 3), pAd->RxAnt.RcvPktNumWhenEvaluate));
+ }
+ else
+ {
+ if (pAd->StaCfg.Psm == PWR_SAVE)
+ return;
+
+ // if the traffic is low, use average rssi as the criteria
+ if (pAd->Mlme.bLowThroughput == TRUE)
+ {
+ rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
+ rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
+ rssi2 = pAd->StaCfg.RssiSample.LastRssi2;
+ }
+ else
+ {
+ rssi0 = pAd->StaCfg.RssiSample.AvgRssi0;
+ rssi1 = pAd->StaCfg.RssiSample.AvgRssi1;
+ rssi2 = pAd->StaCfg.RssiSample.AvgRssi2;
+ }
+
+ if(pAd->Antenna.field.RxPath == 3)
+ {
+ larger = max(rssi0, rssi1);
+
+ if (larger > (rssi2 + 20))
+ pAd->Mlme.RealRxPath = 2;
+ else
+ pAd->Mlme.RealRxPath = 3;
+ }
+ else if(pAd->Antenna.field.RxPath == 2)
+ {
+ if (rssi0 > (rssi1 + 20))
+ pAd->Mlme.RealRxPath = 1;
+ else
+ pAd->Mlme.RealRxPath = 2;
+ }
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
+ BBPR3 &= (~0x18);
+ if(pAd->Mlme.RealRxPath == 3)
+ {
+ BBPR3 |= (0x10);
+ }
+ else if(pAd->Mlme.RealRxPath == 2)
+ {
+ BBPR3 |= (0x8);
+ }
+ else if(pAd->Mlme.RealRxPath == 1)
+ {
+ BBPR3 |= (0x0);
+ }
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
+ }
+ }
+#endif /* RT30xx */
}
&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
)
&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#ifdef RT2860
&& (pAd->bPCIclkOff == FALSE))
+#endif
+#ifdef RT2870
+ )
+#endif
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
R66 = OrigR66Value;
if (pAd->LatchRfRegs.Channel <= 14)
{ //BG band
+#ifdef RT2870
+ // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
+ // Otherwise, it will have some throughput side effect when low RSSI
+#ifndef RT30xx
+ if (IS_RT3070(pAd))
+#endif
+#ifdef RT30xx
+ if (IS_RT30xx(pAd))
+#endif
+ {
+ if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
+ {
+ R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
+ if (OrigR66Value != R66)
+ {
+#ifndef RT30xx
+ RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
+#endif
+#ifdef RT30xx
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
+#endif
+ }
+ }
+ else
+ {
+ R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
+ if (OrigR66Value != R66)
+ {
+#ifndef RT30xx
+ RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
+#endif
+#ifdef RT30xx
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
+#endif
+ }
+ }
+ }
+ else
+#endif // RT2870 //
{
if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
{
}
}
+#ifdef RT2860
VOID AsicResetFromDMABusy(
IN PRTMP_ADAPTER pAd)
{
DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset PBF !!!! \n"));
}
}
+#endif /* RT2860 */
VOID RTMPSetAGCInitValue(
IN PRTMP_ADAPTER pAd,
UCHAR index;
RTMP_RF_REGS *RFRegTable;
+#ifdef RT30xx
+ // The RF programming sequence is difference between 3xxx and 2xxx
+ if (IS_RT3090(pAd))
+ {
+ RT30xxLoadRFSleepModeSetup(pAd); // add by johnli, RF power sequence setup, load RF sleep-mode setup
+ }
+ else
+ {
+#endif // RT30xx //
RFRegTable = RF2850RegTable;
switch (pAd->RfIcType)
default:
break;
}
+#ifdef RT30xx
+ }
+#endif // RT30xx //
+
}
UCHAR index;
RTMP_RF_REGS *RFRegTable;
+#ifdef RT30xx
+ // The RF programming sequence is difference between 3xxx and 2xxx
+ if (IS_RT3090(pAd))
+ {
+ }
+ else
+ {
+#endif // RT30xx //
RFRegTable = RF2850RegTable;
switch (pAd->RfIcType)
break;
}
+#ifndef RT30xx
DBGPRINT(RT_DEBUG_TRACE, ("AsicTurnOnRFClk#%d(RF=%d, ) , R2=0x%08x\n",
Channel,
pAd->RfIcType,
R2));
+#endif
+#ifdef RT30xx
+ }
+#endif // RT30xx //
}
Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
*/
#include "../rt_config.h"
-#include "firmware.h"
+#ifndef RT30xx
+#ifdef RT2860
+#include "firmware.h"
#include <linux/bitrev.h>
+#endif
+#ifdef RT2870
+#include "../../rt2870/common/firmware.h"
+#endif
+#endif
+#ifdef RT30xx
+#include "../../rt3070/firmware.h"
+#endif
UCHAR BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
ULONG BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008,
#define ByteCRC16(v, crc) \
(unsigned short)((crc << 8) ^ ccitt_16Table[((crc >> 8) ^ (v)) & 255])
+#ifdef RT2870
+unsigned char BitReverse(unsigned char x)
+{
+ int i;
+ unsigned char Temp=0;
+ for(i=0; ; i++)
+ {
+ if(x & 0x80) Temp |= 0x80;
+ if(i==7) break;
+ x <<= 1;
+ Temp >>= 1;
+ }
+ return Temp;
+}
+#endif
+
//
// BBP register initialization set
//
//
// RF register initialization set
//
+#ifdef RT2870
+REG_PAIR RT30xx_RFRegTable[] = {
+ {RF_R04, 0x40},
+ {RF_R05, 0x03},
+ {RF_R06, 0x02},
+ {RF_R07, 0x70},
+ {RF_R09, 0x0F},
+#ifndef RT30xx
+ {RF_R10, 0x71},
+#endif
+#ifdef RT30xx
+ {RF_R10, 0x41},
+#endif
+ {RF_R11, 0x21},
+ {RF_R12, 0x7B},
+ {RF_R14, 0x90},
+ {RF_R15, 0x58},
+ {RF_R16, 0xB3},
+ {RF_R17, 0x92},
+ {RF_R18, 0x2C},
+ {RF_R19, 0x02},
+ {RF_R20, 0xBA},
+ {RF_R21, 0xDB},
+ {RF_R24, 0x16},
+ {RF_R25, 0x01},
+#ifndef RT30xx
+ {RF_R27, 0x03},
+#endif
+ {RF_R29, 0x1F},
+};
+#define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
+#endif // RT2870 //
//
// ASIC register initialization sets
{AUTO_RSP_CFG, 0x00000013}, // Initial Auto_Responder, because QA will turn off Auto-Responder
{CCK_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
{OFDM_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled.
+//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
+#ifdef RT2870
+ {PBF_CFG, 0xf40006}, // Only enable Queue 2
+ {MM40_PROT_CFG, 0x3F44084}, // Initial Auto_Responder, because QA will turn off Auto-Responder
+ {WPDMA_GLO_CFG, 0x00000030},
+#endif // RT2870 //
{GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS
{GF40_PROT_CFG, 0x03F44084},
{MM20_PROT_CFG, 0x01744004},
+#ifdef RT2860
{MM40_PROT_CFG, 0x03F54084},
+#endif
{TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff.
{TX_RTS_CFG, 0x00092b20},
{EXP_ACK_TIME, 0x002400ca}, // default value
#define NUM_MAC_REG_PARMS (sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
#define NUM_STA_MAC_REG_PARMS (sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
+#ifdef RT2870
+//
+// RT2870 Firmware Spec only used 1 oct for version expression
+//
+#define FIRMWARE_MINOR_VERSION 7
+
+#endif // RT2870 //
// New 8k byte firmware size for RT3071/RT3072
#define FIRMWAREIMAGE_MAX_LENGTH 0x2000
#define FIRMWAREIMAGEV1_LENGTH 0x1000
#define FIRMWAREIMAGEV2_LENGTH 0x1000
+#ifdef RT2860
#define FIRMWARE_MINOR_VERSION 2
+#endif
/*
// Init spin locks
NdisAllocateSpinLock(&pAd->MgmtRingLock);
+#ifdef RT2860
NdisAllocateSpinLock(&pAd->RxRingLock);
+#endif
for (index =0 ; index < NUM_OF_TX_RING; index++)
{
}
+#ifdef RT2870
+/*
+ ========================================================================
+
+ Routine Description:
+ For RF filter calibration purpose
+
+ Arguments:
+ pAd Pointer to our adapter
+
+ Return Value:
+ None
+
+ IRQL = PASSIVE_LEVEL
+
+ ========================================================================
+*/
+#ifndef RT30xx
+VOID RTUSBFilterCalibration(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue;
+ UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0;
+ UCHAR RF_R24_Value = 0;
+
+ // Give bbp filter initial value
+ pAd->Mlme.CaliBW20RfR24 = 0x16;
+ pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40
+
+ do
+ {
+ if (loop == 1) //BandWidth = 40 MHz
+ {
+ // Write 0x27 to RF_R24 to program filter
+ RF_R24_Value = 0x27;
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+ FilterTarget = 0x19;
+
+ // when calibrate BW40, BBP mask must set to BW40.
+ RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
+ BBPValue&= (~0x18);
+ BBPValue|= (0x10);
+ RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
+ }
+ else //BandWidth = 20 MHz
+ {
+ // Write 0x07 to RF_R24 to program filter
+ RF_R24_Value = 0x07;
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+ FilterTarget = 0x16;
+ }
+
+ // Write 0x01 to RF_R22 to enable baseband loopback mode
+ RT30xxReadRFRegister(pAd, RF_R22, &value);
+ value |= 0x01;
+ RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+ // Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+ RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
+
+ do
+ {
+ // Write 0x90 to BBP_R25 to transmit test tone
+ RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
+
+ RTMPusecDelay(1000);
+ // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+ RTUSBReadBBPRegister(pAd, BBP_R55, &value);
+ R55x = value & 0xFF;
+
+ } while ((ReTry++ < 100) && (R55x == 0));
+
+ // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+ RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06);
+
+ while(TRUE)
+ {
+ // Write 0x90 to BBP_R25 to transmit test tone
+ RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
+
+ //We need to wait for calibration
+ RTMPusecDelay(1000);
+ RTUSBReadBBPRegister(pAd, BBP_R55, &value);
+ value &= 0xFF;
+ if ((R55x - value) < FilterTarget)
+ {
+ RF_R24_Value ++;
+ }
+ else if ((R55x - value) == FilterTarget)
+ {
+ RF_R24_Value ++;
+ count ++;
+ }
+ else
+ {
+ break;
+ }
+
+ // prevent infinite loop cause driver hang.
+ if (loopcnt++ > 100)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
+ break;
+ }
+
+ // Write RF_R24 to program filter
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+ }
+
+ if (count > 0)
+ {
+ RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
+ }
+
+ // Store for future usage
+ if (loopcnt < 100)
+ {
+ if (loop++ == 0)
+ {
+ //BandWidth = 20 MHz
+ pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
+ }
+ else
+ {
+ //BandWidth = 40 MHz
+ pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
+ break;
+ }
+ }
+ else
+ break;
+
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+
+ // reset count
+ count = 0;
+ } while(TRUE);
+
+ //
+ // Set back to initial state
+ //
+ RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
+
+ RT30xxReadRFRegister(pAd, RF_R22, &value);
+ value &= ~(0x01);
+ RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+ // set BBP back to BW20
+ RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
+ BBPValue&= (~0x18);
+ RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
+}
+#endif /* RT30xx */
+#ifdef RT30xx
+VOID RTMPFilterCalibration(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue=0;
+ UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0;
+ UCHAR RF_R24_Value = 0;
+
+ // Give bbp filter initial value
+ pAd->Mlme.CaliBW20RfR24 = 0x1F;
+ pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
+
+ do
+ {
+ if (loop == 1) //BandWidth = 40 MHz
+ {
+ // Write 0x27 to RF_R24 to program filter
+ RF_R24_Value = 0x27;
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+ if (IS_RT3090(pAd))
+ FilterTarget = 0x15;
+ else
+ FilterTarget = 0x19;
+
+ // when calibrate BW40, BBP mask must set to BW40.
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+ BBPValue&= (~0x18);
+ BBPValue|= (0x10);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+ // set to BW40
+ RT30xxReadRFRegister(pAd, RF_R31, &value);
+ value |= 0x20;
+ RT30xxWriteRFRegister(pAd, RF_R31, value);
+ }
+ else //BandWidth = 20 MHz
+ {
+ // Write 0x07 to RF_R24 to program filter
+ RF_R24_Value = 0x07;
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+ if (IS_RT3090(pAd))
+ FilterTarget = 0x13;
+ else
+ FilterTarget = 0x16;
+
+ // set to BW20
+ RT30xxReadRFRegister(pAd, RF_R31, &value);
+ value &= (~0x20);
+ RT30xxWriteRFRegister(pAd, RF_R31, value);
+ }
+
+ // Write 0x01 to RF_R22 to enable baseband loopback mode
+ RT30xxReadRFRegister(pAd, RF_R22, &value);
+ value |= 0x01;
+ RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+ // Write 0x00 to BBP_R24 to set power & frequency of passband test tone
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+ do
+ {
+ // Write 0x90 to BBP_R25 to transmit test tone
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+ RTMPusecDelay(1000);
+ // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+ R55x = value & 0xFF;
+
+ } while ((ReTry++ < 100) && (R55x == 0));
+
+ // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);
+
+ while(TRUE)
+ {
+ // Write 0x90 to BBP_R25 to transmit test tone
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);
+
+ //We need to wait for calibration
+ RTMPusecDelay(1000);
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
+ value &= 0xFF;
+ if ((R55x - value) < FilterTarget)
+ {
+ RF_R24_Value ++;
+ }
+ else if ((R55x - value) == FilterTarget)
+ {
+ RF_R24_Value ++;
+ count ++;
+ }
+ else
+ {
+ break;
+ }
+
+ // prevent infinite loop cause driver hang.
+ if (loopcnt++ > 100)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
+ break;
+ }
+
+ // Write RF_R24 to program filter
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+ }
+
+ if (count > 0)
+ {
+ RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
+ }
+
+ // Store for future usage
+ if (loopcnt < 100)
+ {
+ if (loop++ == 0)
+ {
+ //BandWidth = 20 MHz
+ pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
+ }
+ else
+ {
+ //BandWidth = 40 MHz
+ pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
+ break;
+ }
+ }
+ else
+ break;
+
+ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
+
+ // reset count
+ count = 0;
+ } while(TRUE);
+
+ //
+ // Set back to initial state
+ //
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);
+
+ RT30xxReadRFRegister(pAd, RF_R22, &value);
+ value &= ~(0x01);
+ RT30xxWriteRFRegister(pAd, RF_R22, value);
+
+ // set BBP back to BW20
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
+ BBPValue&= (~0x18);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
+}
+#endif /* RT30xx */
+
+VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
+{
+ INT i;
+ // Driver must read EEPROM to get RfIcType before initial RF registers
+ // Initialize RF register to default value
+#ifndef RT30xx
+ if (IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) ||(pAd->RfIcType == RFIC_2020)))
+ {
+ // Init RF calibration
+ // Driver should toggle RF R30 bit7 before init RF registers
+ ULONG RfReg = 0;
+ RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
+ RfReg |= 0x80;
+ RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+ RTMPusecDelay(1000);
+ RfReg &= 0x7F;
+ RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+
+ // Initialize RF register to default value
+ for (i = 0; i < NUM_RF_REG_PARMS; i++)
+ {
+ RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
+ }
+
+ //For RF filter Calibration
+ RTUSBFilterCalibration(pAd);
+ }
+#endif
+#ifdef RT30xx
+ if (IS_RT3070(pAd) || IS_RT3071(pAd))
+ {
+ // Init RF calibration
+ // Driver should toggle RF R30 bit7 before init RF registers
+ UINT32 RfReg = 0;
+ UINT32 data;
+
+ RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
+ RfReg |= 0x80;
+ RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+ RTMPusecDelay(1000);
+ RfReg &= 0x7F;
+ RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
+
+ // Initialize RF register to default value
+ for (i = 0; i < NUM_RF_REG_PARMS; i++)
+ {
+ RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
+ }
+
+ // add by johnli
+ if (IS_RT3070(pAd))
+ {
+ // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
+ RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
+ data = ((data & 0xF0FFFFFF) | 0x0D000000);
+ RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
+ }
+ else if (IS_RT3071(pAd))
+ {
+ // Driver should set RF R6 bit6 on before init RF registers
+ RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg);
+ RfReg |= 0x40;
+ RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg);
+
+ // init R31
+ RT30xxWriteRFRegister(pAd, RF_R31, 0x14);
+
+ // RT3071 version E has fixed this issue
+ if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
+ {
+ // patch tx EVM issue temporarily
+ RTUSBReadMACRegister(pAd, LDO_CFG0, &data);
+ data = ((data & 0xE0FFFFFF) | 0x0D000000);
+ RTUSBWriteMACRegister(pAd, LDO_CFG0, data);
+ }
+ else
+ {
+ RTMP_IO_READ32(pAd, LDO_CFG0, &data);
+ data = ((data & 0xE0FFFFFF) | 0x01000000);
+ RTMP_IO_WRITE32(pAd, LDO_CFG0, data);
+ }
+
+ // patch LNA_PE_G1 failed issue
+ RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data);
+ data &= ~(0x20);
+ RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
+ }
+
+ //For RF filter Calibration
+ RTMPFilterCalibration(pAd);
+
+ // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
+ if ((pAd->MACVersion & 0xffff) < 0x0211)
+ RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
+
+ // set led open drain enable
+ RTUSBReadMACRegister(pAd, OPT_14, &data);
+ data |= 0x01;
+ RTUSBWriteMACRegister(pAd, OPT_14, data);
+
+ if (IS_RT3071(pAd))
+ {
+ // add by johnli, RF power sequence setup, load RF normal operation-mode setup
+ RT30xxLoadRFNormalModeSetup(pAd);
+ }
+ }
+#endif
+}
+#endif // RT2870 //
/*
Antenna.word = pAd->EEPROMDefaultValue[0];
if (Antenna.word == 0xFFFF)
{
+#ifdef RT30xx
+ if(IS_RT3090(pAd))
+ {
+ Antenna.word = 0;
+ Antenna.field.RfIcType = RFIC_3020;
+ Antenna.field.TxPath = 1;
+ Antenna.field.RxPath = 1;
+ }
+ else
+ {
+#endif // RT30xx //
Antenna.word = 0;
Antenna.field.RfIcType = RFIC_2820;
Antenna.field.TxPath = 1;
Antenna.field.RxPath = 2;
DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+#ifdef RT30xx
+ }
+#endif // RT30xx //
}
// Choose the desired Tx&Rx stream.
NicConfig2.word = pAd->EEPROMDefaultValue[1];
{
+#ifndef RT30xx
NicConfig2.word = 0;
+#endif
if ((NicConfig2.word & 0x00ff) == 0xff)
{
NicConfig2.word &= 0xff00;
RTMPReadTxPwrPerRate(pAd);
+#ifdef RT30xx
+ if (IS_RT30xx(pAd))
+ {
+ eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value);
+ pAd->EFuseTag = (value & 0xff);
+ }
+#endif // RT30xx //
+
DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n"));
}
}
}
+#ifndef RT30xx
Antenna.word = pAd->Antenna.word;
+#endif
+#ifdef RT30xx
+ Antenna.word = pAd->EEPROMDefaultValue[0];
+ if (Antenna.word == 0xFFFF)
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
+ BUG_ON(Antenna.word == 0xFFFF);
+ }
+#endif
pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath));
+
+ // Save the antenna for future use
+ pAd->Antenna.word = Antenna.word;
+#endif
NicConfig2.word = pAd->EEPROMDefaultValue[1];
+#ifdef RT30xx
+ {
+ if ((NicConfig2.word & 0x00ff) == 0xff)
+ {
+ NicConfig2.word &= 0xff00;
+ }
+ if ((NicConfig2.word >> 8) == 0xff)
+ {
+ NicConfig2.word &= 0x00ff;
+ }
+ }
+#endif
// Save the antenna for future use
pAd->NicConfig2.word = NicConfig2.word;
+#ifdef RT30xx
+ // set default antenna as main
+ if (pAd->RfIcType == RFIC_3020)
+ AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
+#endif
//
// Send LED Setting to MCU.
//
pAd->LedCntl.word = 0x01;
pAd->Led1 = 0x5555;
pAd->Led2 = 0x2221;
+#ifdef RT2860
pAd->Led3 = 0xA9F8;
+#endif
+
+#ifdef RT2870
+ pAd->Led3 = 0x5627;
+#endif // RT2870 //
}
AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8));
else
{
RTMPSetLED(pAd, LED_RADIO_ON);
+#ifdef RT2860
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00);
// 2-1. wait command ok.
AsicCheckCommanOk(pAd, PowerWakeCID);
+#endif
}
}
{
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
WPDMA_GLO_CFG_STRUC GloCfg;
+#ifdef RT2860
UINT32 Value;
DELAY_INT_CFG_STRUC IntCfg;
+#endif
ULONG i =0, j=0;
AC_TXOP_CSR0_STRUC csr0;
// asic simulation sequence put this ahead before loading firmware.
// pbf hardware reset
+#ifdef RT2860
RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings.
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f);
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00);
+#endif
// Initialze ASIC for TX & Rx operation
if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS)
}
+#ifdef RT2860
// Write AC_BK base address register
Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value);
// Write RX_RING_CSR register
Value = RX_RING_SIZE;
RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value);
+#endif /* RT2860 */
// WMM parameter
RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
+#ifdef RT2860
// 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
i = 0;
do
IntCfg.word = 0;
RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word);
+#endif
// reset action
ULONG Index = 0;
UCHAR R0 = 0xff;
UINT32 MacCsr12 = 0, Counter = 0;
+#ifdef RT2870
+ UINT32 MacCsr0 = 0;
+ NTSTATUS Status;
+ UCHAR Value = 0xff;
+#endif // RT2870 //
+#ifdef RT30xx
+ UINT32 eFuseCtrl;
+#endif // RT30xx //
USHORT KeyIdx;
INT i,apidx;
DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
+#ifdef RT2860
if (bHardReset == TRUE)
{
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
}
else
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
+#endif
+#ifdef RT2870
+ //
+ // Make sure MAC gets ready after NICLoadFirmware().
+ //
+ Index = 0;
+
+ //To avoid hang-on issue when interface up in kernel 2.4,
+ //we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly.
+ do
+ {
+ RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
+
+ if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF))
+ break;
+
+ RTMPusecDelay(10);
+ } while (Index++ < 100);
+
+ pAd->MACVersion = MacCsr0;
+ DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
+ // turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue.
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12);
+ MacCsr12 &= (~0x2000);
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12);
+
+ RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
+ RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0);
+ Status = RTUSBVenderReset(pAd);
+#endif
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
+
// Initialize MAC register to default value
+#ifdef RT2860
for (Index = 0; Index < NUM_MAC_REG_PARMS; Index++)
{
RTMP_IO_WRITE32(pAd, MACRegTable[Index].Register, MACRegTable[Index].Value);
}
+#endif
+#ifdef RT2870
+ for(Index=0; Index<NUM_MAC_REG_PARMS; Index++)
+ {
+#ifdef RT3070
+ if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd)))
+ {
+ MACRegTable[Index].Value = 0x00000400;
+ }
+#endif // RT3070 //
+ RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
+ }
+
+#ifndef RT30xx
+ if(IS_RT3070(pAd))
+ {
+ // According to Frank Hsu (from Gary Tsao)
+ RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400);
+
+ // Initialize RT3070 serial MAC registers which is different from RT2870 serial
+ RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0);
+ RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0);
+ }
+#endif
+#endif // RT2870 //
{
for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
{
+#ifdef RT2860
RTMP_IO_WRITE32(pAd, STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
+#endif
+#ifdef RT2870
+ RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
+#endif
}
}
+#ifdef RT30xx
+ // Initialize RT3070 serial MAc registers which is different from RT2870 serial
+ if (IS_RT3090(pAd))
+ {
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
+
+ // RT3071 version E has fixed this issue
+ if ((pAd->MACVersion & 0xffff) < 0x0211)
+ {
+ if (pAd->NicConfig2.field.DACTestBit == 1)
+ {
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically
+ }
+ else
+ {
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); // To fix throughput drop drastically
+ }
+ }
+ else
+ {
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
+ }
+ }
+ else if (IS_RT3070(pAd))
+ {
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
+ RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically
+ }
+#endif // RT30xx //
+
//
// Before program BBP, we need to wait BBP/RF get wake up.
//
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
}
+#ifndef RT30xx
// for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
if ((pAd->MACVersion&0xffff) != 0x0101)
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
+#ifdef RT2870
+ //write RT3070 BBP wchich different with 2870 after write RT2870 BBP
+ if (IS_RT3070(pAd))
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05);
+ }
+#endif // RT2870 //
+#endif
+#ifdef RT30xx
+ // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
+ // RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
+ if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd)))
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
+
+// add by johnli, RF power sequence setup
+ if (IS_RT30xx(pAd))
+ { //update for RT3070/71/72/90/91/92.
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33);
+ }
+
+ if (IS_RT3090(pAd))
+ {
+ UCHAR bbpreg=0;
+
+ // enable DC filter
+ if ((pAd->MACVersion & 0xffff) >= 0x0211)
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
+ }
+ // improve power consumption
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
+ if (pAd->Antenna.field.TxPath == 1)
+ {
+ // turn off tx DAC_1
+ bbpreg = (bbpreg | 0x20);
+ }
+
+ if (pAd->Antenna.field.RxPath == 1)
+ {
+ // turn off tx ADC_1
+ bbpreg &= (~0x2);
+ }
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
+
+ // improve power consumption in RT3071 Ver.E
+ if ((pAd->MACVersion & 0xffff) >= 0x0211)
+ {
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
+ bbpreg &= (~0x3);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
+ }
+ }
+#endif
if (pAd->MACVersion == 0x28600100)
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr);
}
+#ifdef RT2870
+{
+ UCHAR MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0};
+
+ //Initialize WCID table
+ Value = 0xff;
+ for(Index =0 ;Index < 254;Index++)
+ {
+ RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8);
+ }
+}
+#endif // RT2870 //
// Add radio off control
{
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00);
}
}
+#ifdef RT2870
+ AsicDisableSync(pAd);
+ // Clear raw counters
+ RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
+ RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter);
+ RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter);
+ RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter);
+ RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter);
+ RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter);
+ // Default PCI clock cycle per ms is different as default setting, which is based on PCI.
+ RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter);
+ Counter&=0xffffff00;
+ Counter|=0x000001e;
+ RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
+#endif // RT2870 //
+#ifdef RT30xx
+ pAd->bUseEfuse=FALSE;
+ RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl);
+ pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0;
+ if(pAd->bUseEfuse)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n"));
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n"));
+
+ }
+#endif // RT30xx //
{
// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
}
+#ifdef RT2860
VOID NICRestoreBBPValue(
IN PRTMP_ADAPTER pAd)
{
DBGPRINT(RT_DEBUG_TRACE, ("<--- NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n"));
}
+#endif /* RT2860 */
/*
========================================================================
// Update RX Overflow counter
pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount);
+#ifdef RT2870
+ if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt)
+ {
+ pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount;
+ pAd->watchDogRxOverFlowCnt = 0;
+ }
+ else
+ {
+ if (RxStaCnt2.field.RxFifoOverflowCount)
+ pAd->watchDogRxOverFlowCnt++;
+ else
+ pAd->watchDogRxOverFlowCnt = 0;
+ }
+#endif // RT2870 //
+
+
if (!pAd->bUpdateBcnCntDone)
{
// Update BEACON sent count
ULONG FileLength, Index;
//ULONG firm;
UINT32 MacReg = 0;
+#ifdef RT2870
+ UINT32 Version = (pAd->MACVersion >> 16);
+#endif // RT2870 //
pFirmwareImage = FirmwareImage;
FileLength = sizeof(FirmwareImage);
+#ifdef RT2870
+ // New 8k byte firmware size for RT3071/RT3072
+ //printk("Usb Chip\n");
+ if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH)
+ //The firmware image consists of two parts. One is the origianl and the other is the new.
+ //Use Second Part
+ {
+ if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070))
+ { // Use Firmware V2.
+ //printk("KH:Use New Version,part2\n");
+ pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH];
+ FileLength = FIRMWAREIMAGEV2_LENGTH;
+ }
+ else
+ {
+ //printk("KH:Use New Version,part1\n");
+ pFirmwareImage = FirmwareImage;
+ FileLength = FIRMWAREIMAGEV1_LENGTH;
+ }
+ }
+ else
+ {
+ DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n"));
+ Status = NDIS_STATUS_FAILURE;
+ }
+
+#endif // RT2870 //
+
RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength);
/* check if MCU is ready */
//
// part I. intialize common configuration
//
+#ifdef RT2870
+ pAd->BulkOutReq = 0;
+
+ pAd->BulkOutComplete = 0;
+ pAd->BulkOutCompleteOther = 0;
+ pAd->BulkOutCompleteCancel = 0;
+ pAd->BulkInReq = 0;
+ pAd->BulkInComplete = 0;
+ pAd->BulkInCompleteFail = 0;
+
+ //pAd->QuickTimerP = 100;
+ //pAd->TurnAggrBulkInCount = 0;
+ pAd->bUsbTxBulkAggre = 0;
+
+ // init as unsed value to ensure driver will set to MCU once.
+ pAd->LedIndicatorStregth = 0xFF;
+
+ pAd->CommonCfg.MaxPktOneTxBulk = 2;
+ pAd->CommonCfg.TxBulkFactor = 1;
+ pAd->CommonCfg.RxBulkFactor =1;
+
+ pAd->CommonCfg.TxPower = 100; //mW
+
+ NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm));
+#endif // RT2870 //
for(key_index=0; key_index<SHARE_KEY_NUM; key_index++)
{
}
}
+#ifdef RT30xx
+ pAd->EepromAccess = FALSE;
+#endif
pAd->Antenna.word = 0;
pAd->CommonCfg.BBPCurrentBW = BW_20;
pAd->LedCntl.word = 0;
+#ifdef RT2860
pAd->LedIndicatorStregth = 0;
pAd->RLnkCtrlOffset = 0;
pAd->HostLnkCtrlOffset = 0;
pAd->CheckDmaBusyCount = 0;
+#endif
pAd->bAutoTxAgcA = FALSE; // Default is OFF
pAd->bAutoTxAgcG = FALSE; // Default is OFF
NdisAllocateSpinLock(&pAd->MacTabLock);
pAd->CommonCfg.bWiFiTest = FALSE;
+#ifdef RT2860
pAd->bPCIclkOff = FALSE;
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
}
pTimer->State = FALSE;
pTimer->cookie = (ULONG) pData;
+#ifdef RT2870
+ pTimer->pAd = pAd;
+#endif // RT2870 //
RTMP_OS_Init_Timer(pAd, &pTimer->TimerObj, pTimerFunc, (PVOID) pTimer);
}
if (*pCancelled == TRUE)
pTimer->State = TRUE;
+#ifdef RT2870
+ // We need to go-through the TimerQ to findout this timer handler and remove it if
+ // it's still waiting for execution.
+
+ RT2870_TimerQ_Remove(pTimer->pAd, pTimer);
+#endif // RT2870 //
}
else
{
if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL)
{
+#ifndef RT30xx
DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%zu).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
+#endif
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%d).\n", __func__, sizeof(MEASURE_RPI_REPORT)));
+#endif
return;
}
projects / ~emulex / infiniband.git / commitdiff