extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o signal.o entry.o traps_32.o irq.o \
- ptrace.o time.o ioport.o ldt.o setup.o i8259_32.o sys_i386_32.o \
+ ptrace.o time.o ioport.o ldt.o setup_32.o i8259_32.o sys_i386_32.o \
pci-dma_32.o i386_ksyms.o i387.o bootflag.o e820_32.o\
quirks.o i8237.o topology.o alternative.o i8253_32.o tsc.o
+++ /dev/null
-/*
- * linux/arch/i386/kernel/setup.c
- *
- * Copyright (C) 1995 Linus Torvalds
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- *
- * Memory region support
- * David Parsons <orc@pell.chi.il.us>, July-August 1999
- *
- * Added E820 sanitization routine (removes overlapping memory regions);
- * Brian Moyle <bmoyle@mvista.com>, February 2001
- *
- * Moved CPU detection code to cpu/${cpu}.c
- * Patrick Mochel <mochel@osdl.org>, March 2002
- *
- * Provisions for empty E820 memory regions (reported by certain BIOSes).
- * Alex Achenbach <xela@slit.de>, December 2002.
- *
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/apm_bios.h>
-#include <linux/initrd.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/mca.h>
-#include <linux/root_dev.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <linux/efi.h>
-#include <linux/init.h>
-#include <linux/edd.h>
-#include <linux/nodemask.h>
-#include <linux/kexec.h>
-#include <linux/crash_dump.h>
-#include <linux/dmi.h>
-#include <linux/pfn.h>
-
-#include <video/edid.h>
-
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/mmzone.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-#include <asm/sections.h>
-#include <asm/io_apic.h>
-#include <asm/ist.h>
-#include <asm/io.h>
-#include <asm/vmi.h>
-#include <setup_arch.h>
-#include <bios_ebda.h>
-
-/* This value is set up by the early boot code to point to the value
- immediately after the boot time page tables. It contains a *physical*
- address, and must not be in the .bss segment! */
-unsigned long init_pg_tables_end __initdata = ~0UL;
-
-int disable_pse __devinitdata = 0;
-
-/*
- * Machine setup..
- */
-extern struct resource code_resource;
-extern struct resource data_resource;
-
-/* cpu data as detected by the assembly code in head.S */
-struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-/* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned long mmu_cr4_features;
-
-/* for MCA, but anyone else can use it if they want */
-unsigned int machine_id;
-#ifdef CONFIG_MCA
-EXPORT_SYMBOL(machine_id);
-#endif
-unsigned int machine_submodel_id;
-unsigned int BIOS_revision;
-unsigned int mca_pentium_flag;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-/* user-defined highmem size */
-static unsigned int highmem_pages = -1;
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct apm_info apm_info;
-EXPORT_SYMBOL(apm_info);
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-struct ist_info ist_info;
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
- defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-EXPORT_SYMBOL(ist_info);
-#endif
-
-extern void early_cpu_init(void);
-extern int root_mountflags;
-
-unsigned long saved_videomode;
-
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-struct boot_params __initdata boot_params;
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- * from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
- memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
- memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
- edd.mbr_signature_nr = EDD_MBR_SIG_NR;
- edd.edd_info_nr = EDD_NR;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-int __initdata user_defined_memmap = 0;
-
-/*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem= [also see Documentation/i386/boot.txt]
- */
-static int __init parse_mem(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (strcmp(arg, "nopentium") == 0) {
- clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
- disable_pse = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long mem_size;
-
- mem_size = memparse(arg, &arg);
- limit_regions(mem_size);
- user_defined_memmap = 1;
- }
- return 0;
-}
-early_param("mem", parse_mem);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- elfcorehdr_addr = memparse(arg, &arg);
- return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-#endif /* CONFIG_PROC_VMCORE */
-
-/*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
-static int __init parse_highmem(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
- return 0;
-}
-early_param("highmem", parse_highmem);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the
- * vmalloc area - the default is 128m.
- */
-static int __init parse_vmalloc(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- __VMALLOC_RESERVE = memparse(arg, &arg);
- return 0;
-}
-early_param("vmalloc", parse_vmalloc);
-
-/*
- * reservetop=size reserves a hole at the top of the kernel address space which
- * a hypervisor can load into later. Needed for dynamically loaded hypervisors,
- * so relocating the fixmap can be done before paging initialization.
- */
-static int __init parse_reservetop(char *arg)
-{
- unsigned long address;
-
- if (!arg)
- return -EINVAL;
-
- address = memparse(arg, &arg);
- reserve_top_address(address);
- return 0;
-}
-early_param("reservetop", parse_reservetop);
-
-/*
- * Determine low and high memory ranges:
- */
-unsigned long __init find_max_low_pfn(void)
-{
- unsigned long max_low_pfn;
-
- max_low_pfn = max_pfn;
- if (max_low_pfn > MAXMEM_PFN) {
- if (highmem_pages == -1)
- highmem_pages = max_pfn - MAXMEM_PFN;
- if (highmem_pages + MAXMEM_PFN < max_pfn)
- max_pfn = MAXMEM_PFN + highmem_pages;
- if (highmem_pages + MAXMEM_PFN > max_pfn) {
- printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
- highmem_pages = 0;
- }
- max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
- /* Maximum memory usable is what is directly addressable */
- printk(KERN_WARNING "Warning only %ldMB will be used.\n",
- MAXMEM>>20);
- if (max_pfn > MAX_NONPAE_PFN)
- printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
- else
- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
- max_pfn = MAXMEM_PFN;
-#else /* !CONFIG_HIGHMEM */
-#ifndef CONFIG_HIGHMEM64G
- if (max_pfn > MAX_NONPAE_PFN) {
- max_pfn = MAX_NONPAE_PFN;
- printk(KERN_WARNING "Warning only 4GB will be used.\n");
- printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
- }
-#endif /* !CONFIG_HIGHMEM64G */
-#endif /* !CONFIG_HIGHMEM */
- } else {
- if (highmem_pages == -1)
- highmem_pages = 0;
-#ifdef CONFIG_HIGHMEM
- if (highmem_pages >= max_pfn) {
- printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
- highmem_pages = 0;
- }
- if (highmem_pages) {
- if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
- printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
- highmem_pages = 0;
- }
- max_low_pfn -= highmem_pages;
- }
-#else
- if (highmem_pages)
- printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
-#endif
- }
- return max_low_pfn;
-}
-
-/*
- * workaround for Dell systems that neglect to reserve EBDA
- */
-static void __init reserve_ebda_region(void)
-{
- unsigned int addr;
- addr = get_bios_ebda();
- if (addr)
- reserve_bootmem(addr, PAGE_SIZE);
-}
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init setup_bootmem_allocator(void);
-static unsigned long __init setup_memory(void)
-{
- /*
- * partially used pages are not usable - thus
- * we are rounding upwards:
- */
- min_low_pfn = PFN_UP(init_pg_tables_end);
-
- find_max_pfn();
-
- max_low_pfn = find_max_low_pfn();
-
-#ifdef CONFIG_HIGHMEM
- highstart_pfn = highend_pfn = max_pfn;
- if (max_pfn > max_low_pfn) {
- highstart_pfn = max_low_pfn;
- }
- printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
- pages_to_mb(highend_pfn - highstart_pfn));
- num_physpages = highend_pfn;
- high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
- num_physpages = max_low_pfn;
- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
-#ifdef CONFIG_FLATMEM
- max_mapnr = num_physpages;
-#endif
- printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
- pages_to_mb(max_low_pfn));
-
- setup_bootmem_allocator();
-
- return max_low_pfn;
-}
-
-void __init zone_sizes_init(void)
-{
- unsigned long max_zone_pfns[MAX_NR_ZONES];
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] =
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
- max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-#ifdef CONFIG_HIGHMEM
- max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
- add_active_range(0, 0, highend_pfn);
-#else
- add_active_range(0, 0, max_low_pfn);
-#endif
-
- free_area_init_nodes(max_zone_pfns);
-}
-#else
-extern unsigned long __init setup_memory(void);
-extern void zone_sizes_init(void);
-#endif /* !CONFIG_NEED_MULTIPLE_NODES */
-
-void __init setup_bootmem_allocator(void)
-{
- unsigned long bootmap_size;
- /*
- * Initialize the boot-time allocator (with low memory only):
- */
- bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
-
- register_bootmem_low_pages(max_low_pfn);
-
- /*
- * Reserve the bootmem bitmap itself as well. We do this in two
- * steps (first step was init_bootmem()) because this catches
- * the (very unlikely) case of us accidentally initializing the
- * bootmem allocator with an invalid RAM area.
- */
- reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
- bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text));
-
- /*
- * reserve physical page 0 - it's a special BIOS page on many boxes,
- * enabling clean reboots, SMP operation, laptop functions.
- */
- reserve_bootmem(0, PAGE_SIZE);
-
- /* reserve EBDA region, it's a 4K region */
- reserve_ebda_region();
-
- /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent
- PCI prefetch into it (errata #56). Usually the page is reserved anyways,
- unless you have no PS/2 mouse plugged in. */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 6)
- reserve_bootmem(0xa0000 - 4096, 4096);
-
-#ifdef CONFIG_SMP
- /*
- * But first pinch a few for the stack/trampoline stuff
- * FIXME: Don't need the extra page at 4K, but need to fix
- * trampoline before removing it. (see the GDT stuff)
- */
- reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
-#endif
-#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- */
- acpi_reserve_bootmem();
-#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
-#endif
- numa_kva_reserve();
-#ifdef CONFIG_BLK_DEV_INITRD
- if (LOADER_TYPE && INITRD_START) {
- if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
- reserve_bootmem(INITRD_START, INITRD_SIZE);
- initrd_start = INITRD_START + PAGE_OFFSET;
- initrd_end = initrd_start+INITRD_SIZE;
- }
- else {
- printk(KERN_ERR "initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- INITRD_START + INITRD_SIZE,
- max_low_pfn << PAGE_SHIFT);
- initrd_start = 0;
- }
- }
-#endif
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- reserve_bootmem(crashk_res.start,
- crashk_res.end - crashk_res.start + 1);
-#endif
-}
-
-/*
- * The node 0 pgdat is initialized before all of these because
- * it's needed for bootmem. node>0 pgdats have their virtual
- * space allocated before the pagetables are in place to access
- * them, so they can't be cleared then.
- *
- * This should all compile down to nothing when NUMA is off.
- */
-static void __init remapped_pgdat_init(void)
-{
- int nid;
-
- for_each_online_node(nid) {
- if (nid != 0)
- memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
- }
-}
-
-#ifdef CONFIG_MCA
-static void set_mca_bus(int x)
-{
- MCA_bus = x;
-}
-#else
-static void set_mca_bus(int x) { }
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
- return machine_specific_memory_setup();
-}
-
-/*
- * Determine if we were loaded by an EFI loader. If so, then we have also been
- * passed the efi memmap, systab, etc., so we should use these data structures
- * for initialization. Note, the efi init code path is determined by the
- * global efi_enabled. This allows the same kernel image to be used on existing
- * systems (with a traditional BIOS) as well as on EFI systems.
- */
-void __init setup_arch(char **cmdline_p)
-{
- unsigned long max_low_pfn;
-
- memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
- pre_setup_arch_hook();
- early_cpu_init();
-
- /*
- * FIXME: This isn't an official loader_type right
- * now but does currently work with elilo.
- * If we were configured as an EFI kernel, check to make
- * sure that we were loaded correctly from elilo and that
- * the system table is valid. If not, then initialize normally.
- */
-#ifdef CONFIG_EFI
- if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
- efi_enabled = 1;
-#endif
-
- ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- screen_info = SCREEN_INFO;
- edid_info = EDID_INFO;
- apm_info.bios = APM_BIOS_INFO;
- ist_info = IST_INFO;
- saved_videomode = VIDEO_MODE;
- if( SYS_DESC_TABLE.length != 0 ) {
- set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
- machine_id = SYS_DESC_TABLE.table[0];
- machine_submodel_id = SYS_DESC_TABLE.table[1];
- BIOS_revision = SYS_DESC_TABLE.table[2];
- }
- bootloader_type = LOADER_TYPE;
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
- ARCH_SETUP
- if (efi_enabled)
- efi_init();
- else {
- printk(KERN_INFO "BIOS-provided physical RAM map:\n");
- print_memory_map(memory_setup());
- }
-
- copy_edd();
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) _text;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
-
- code_resource.start = virt_to_phys(_text);
- code_resource.end = virt_to_phys(_etext)-1;
- data_resource.start = virt_to_phys(_etext);
- data_resource.end = virt_to_phys(_edata)-1;
-
- parse_early_param();
-
- if (user_defined_memmap) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
- }
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- max_low_pfn = setup_memory();
-
-#ifdef CONFIG_VMI
- /*
- * Must be after max_low_pfn is determined, and before kernel
- * pagetables are setup.
- */
- vmi_init();
-#endif
-
- /*
- * NOTE: before this point _nobody_ is allowed to allocate
- * any memory using the bootmem allocator. Although the
- * alloctor is now initialised only the first 8Mb of the kernel
- * virtual address space has been mapped. All allocations before
- * paging_init() has completed must use the alloc_bootmem_low_pages()
- * variant (which allocates DMA'able memory) and care must be taken
- * not to exceed the 8Mb limit.
- */
-
-#ifdef CONFIG_SMP
- smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
- paging_init();
- remapped_pgdat_init();
- sparse_init();
- zone_sizes_init();
-
- /*
- * NOTE: at this point the bootmem allocator is fully available.
- */
-
- paravirt_post_allocator_init();
-
- dmi_scan_machine();
-
-#ifdef CONFIG_X86_GENERICARCH
- generic_apic_probe();
-#endif
- if (efi_enabled)
- efi_map_memmap();
-
-#ifdef CONFIG_ACPI
- /*
- * Parse the ACPI tables for possible boot-time SMP configuration.
- */
- acpi_boot_table_init();
-#endif
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_X86_IO_APIC
- check_acpi_pci(); /* Checks more than just ACPI actually */
-#endif
-#endif
-
-#ifdef CONFIG_ACPI
- acpi_boot_init();
-
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
- if (def_to_bigsmp)
- printk(KERN_WARNING "More than 8 CPUs detected and "
- "CONFIG_X86_PC cannot handle it.\nUse "
- "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
- if (smp_found_config)
- get_smp_config();
-#endif
-
- e820_register_memory();
- e820_mark_nosave_regions();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
- conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-#endif
-}
--- /dev/null
+/*
+ * linux/arch/i386/kernel/setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ * Memory region support
+ * David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ * Added E820 sanitization routine (removes overlapping memory regions);
+ * Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ * Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ * Provisions for empty E820 memory regions (reported by certain BIOSes).
+ * Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/screen_info.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+
+#include <video/edid.h>
+
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/mmzone.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/sections.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/io.h>
+#include <asm/vmi.h>
+#include <setup_arch.h>
+#include <bios_ebda.h>
+
+/* This value is set up by the early boot code to point to the value
+ immediately after the boot time page tables. It contains a *physical*
+ address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+int disable_pse __devinitdata = 0;
+
+/*
+ * Machine setup..
+ */
+extern struct resource code_resource;
+extern struct resource data_resource;
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+EXPORT_SYMBOL(boot_cpu_data);
+
+unsigned long mmu_cr4_features;
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+#ifdef CONFIG_MCA
+EXPORT_SYMBOL(machine_id);
+#endif
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+unsigned int mca_pentium_flag;
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
+/* user-defined highmem size */
+static unsigned int highmem_pages = -1;
+
+/*
+ * Setup options
+ */
+struct screen_info screen_info;
+EXPORT_SYMBOL(screen_info);
+struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
+struct edid_info edid_info;
+EXPORT_SYMBOL_GPL(edid_info);
+struct ist_info ist_info;
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+EXPORT_SYMBOL(ist_info);
+#endif
+
+extern void early_cpu_init(void);
+extern int root_mountflags;
+
+unsigned long saved_videomode;
+
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+struct boot_params __initdata boot_params;
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ * from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+ memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
+ memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
+ edd.mbr_signature_nr = EDD_MBR_SIG_NR;
+ edd.edd_info_nr = EDD_NR;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+int __initdata user_defined_memmap = 0;
+
+/*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem= [also see Documentation/i386/boot.txt]
+ */
+static int __init parse_mem(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ if (strcmp(arg, "nopentium") == 0) {
+ clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+ disable_pse = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long mem_size;
+
+ mem_size = memparse(arg, &arg);
+ limit_regions(mem_size);
+ user_defined_memmap = 1;
+ }
+ return 0;
+}
+early_param("mem", parse_mem);
+
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ elfcorehdr_addr = memparse(arg, &arg);
+ return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif /* CONFIG_PROC_VMCORE */
+
+/*
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
+ */
+static int __init parse_highmem(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
+ return 0;
+}
+early_param("highmem", parse_highmem);
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the
+ * vmalloc area - the default is 128m.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ __VMALLOC_RESERVE = memparse(arg, &arg);
+ return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+
+/*
+ * reservetop=size reserves a hole at the top of the kernel address space which
+ * a hypervisor can load into later. Needed for dynamically loaded hypervisors,
+ * so relocating the fixmap can be done before paging initialization.
+ */
+static int __init parse_reservetop(char *arg)
+{
+ unsigned long address;
+
+ if (!arg)
+ return -EINVAL;
+
+ address = memparse(arg, &arg);
+ reserve_top_address(address);
+ return 0;
+}
+early_param("reservetop", parse_reservetop);
+
+/*
+ * Determine low and high memory ranges:
+ */
+unsigned long __init find_max_low_pfn(void)
+{
+ unsigned long max_low_pfn;
+
+ max_low_pfn = max_pfn;
+ if (max_low_pfn > MAXMEM_PFN) {
+ if (highmem_pages == -1)
+ highmem_pages = max_pfn - MAXMEM_PFN;
+ if (highmem_pages + MAXMEM_PFN < max_pfn)
+ max_pfn = MAXMEM_PFN + highmem_pages;
+ if (highmem_pages + MAXMEM_PFN > max_pfn) {
+ printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
+ highmem_pages = 0;
+ }
+ max_low_pfn = MAXMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+ /* Maximum memory usable is what is directly addressable */
+ printk(KERN_WARNING "Warning only %ldMB will be used.\n",
+ MAXMEM>>20);
+ if (max_pfn > MAX_NONPAE_PFN)
+ printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
+ else
+ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+ max_pfn = MAXMEM_PFN;
+#else /* !CONFIG_HIGHMEM */
+#ifndef CONFIG_HIGHMEM64G
+ if (max_pfn > MAX_NONPAE_PFN) {
+ max_pfn = MAX_NONPAE_PFN;
+ printk(KERN_WARNING "Warning only 4GB will be used.\n");
+ printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
+ }
+#endif /* !CONFIG_HIGHMEM64G */
+#endif /* !CONFIG_HIGHMEM */
+ } else {
+ if (highmem_pages == -1)
+ highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+ if (highmem_pages >= max_pfn) {
+ printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+ highmem_pages = 0;
+ }
+ if (highmem_pages) {
+ if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
+ printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
+ highmem_pages = 0;
+ }
+ max_low_pfn -= highmem_pages;
+ }
+#else
+ if (highmem_pages)
+ printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+ }
+ return max_low_pfn;
+}
+
+/*
+ * workaround for Dell systems that neglect to reserve EBDA
+ */
+static void __init reserve_ebda_region(void)
+{
+ unsigned int addr;
+ addr = get_bios_ebda();
+ if (addr)
+ reserve_bootmem(addr, PAGE_SIZE);
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+void __init setup_bootmem_allocator(void);
+static unsigned long __init setup_memory(void)
+{
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ min_low_pfn = PFN_UP(init_pg_tables_end);
+
+ find_max_pfn();
+
+ max_low_pfn = find_max_low_pfn();
+
+#ifdef CONFIG_HIGHMEM
+ highstart_pfn = highend_pfn = max_pfn;
+ if (max_pfn > max_low_pfn) {
+ highstart_pfn = max_low_pfn;
+ }
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highend_pfn - highstart_pfn));
+ num_physpages = highend_pfn;
+ high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+ num_physpages = max_low_pfn;
+ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+#ifdef CONFIG_FLATMEM
+ max_mapnr = num_physpages;
+#endif
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(max_low_pfn));
+
+ setup_bootmem_allocator();
+
+ return max_low_pfn;
+}
+
+void __init zone_sizes_init(void)
+{
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+#ifdef CONFIG_HIGHMEM
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+ add_active_range(0, 0, highend_pfn);
+#else
+ add_active_range(0, 0, max_low_pfn);
+#endif
+
+ free_area_init_nodes(max_zone_pfns);
+}
+#else
+extern unsigned long __init setup_memory(void);
+extern void zone_sizes_init(void);
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+
+void __init setup_bootmem_allocator(void)
+{
+ unsigned long bootmap_size;
+ /*
+ * Initialize the boot-time allocator (with low memory only):
+ */
+ bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
+
+ register_bootmem_low_pages(max_low_pfn);
+
+ /*
+ * Reserve the bootmem bitmap itself as well. We do this in two
+ * steps (first step was init_bootmem()) because this catches
+ * the (very unlikely) case of us accidentally initializing the
+ * bootmem allocator with an invalid RAM area.
+ */
+ reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
+ bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text));
+
+ /*
+ * reserve physical page 0 - it's a special BIOS page on many boxes,
+ * enabling clean reboots, SMP operation, laptop functions.
+ */
+ reserve_bootmem(0, PAGE_SIZE);
+
+ /* reserve EBDA region, it's a 4K region */
+ reserve_ebda_region();
+
+ /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent
+ PCI prefetch into it (errata #56). Usually the page is reserved anyways,
+ unless you have no PS/2 mouse plugged in. */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 == 6)
+ reserve_bootmem(0xa0000 - 4096, 4096);
+
+#ifdef CONFIG_SMP
+ /*
+ * But first pinch a few for the stack/trampoline stuff
+ * FIXME: Don't need the extra page at 4K, but need to fix
+ * trampoline before removing it. (see the GDT stuff)
+ */
+ reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+ /*
+ * Reserve low memory region for sleep support.
+ */
+ acpi_reserve_bootmem();
+#endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+#endif
+ numa_kva_reserve();
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (LOADER_TYPE && INITRD_START) {
+ if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+ reserve_bootmem(INITRD_START, INITRD_SIZE);
+ initrd_start = INITRD_START + PAGE_OFFSET;
+ initrd_end = initrd_start+INITRD_SIZE;
+ }
+ else {
+ printk(KERN_ERR "initrd extends beyond end of memory "
+ "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+ INITRD_START + INITRD_SIZE,
+ max_low_pfn << PAGE_SHIFT);
+ initrd_start = 0;
+ }
+ }
+#endif
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1);
+#endif
+}
+
+/*
+ * The node 0 pgdat is initialized before all of these because
+ * it's needed for bootmem. node>0 pgdats have their virtual
+ * space allocated before the pagetables are in place to access
+ * them, so they can't be cleared then.
+ *
+ * This should all compile down to nothing when NUMA is off.
+ */
+static void __init remapped_pgdat_init(void)
+{
+ int nid;
+
+ for_each_online_node(nid) {
+ if (nid != 0)
+ memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+ }
+}
+
+#ifdef CONFIG_MCA
+static void set_mca_bus(int x)
+{
+ MCA_bus = x;
+}
+#else
+static void set_mca_bus(int x) { }
+#endif
+
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __init __attribute__((weak)) memory_setup(void)
+{
+ return machine_specific_memory_setup();
+}
+
+/*
+ * Determine if we were loaded by an EFI loader. If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization. Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long max_low_pfn;
+
+ memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+ pre_setup_arch_hook();
+ early_cpu_init();
+
+ /*
+ * FIXME: This isn't an official loader_type right
+ * now but does currently work with elilo.
+ * If we were configured as an EFI kernel, check to make
+ * sure that we were loaded correctly from elilo and that
+ * the system table is valid. If not, then initialize normally.
+ */
+#ifdef CONFIG_EFI
+ if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
+ efi_enabled = 1;
+#endif
+
+ ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ screen_info = SCREEN_INFO;
+ edid_info = EDID_INFO;
+ apm_info.bios = APM_BIOS_INFO;
+ ist_info = IST_INFO;
+ saved_videomode = VIDEO_MODE;
+ if( SYS_DESC_TABLE.length != 0 ) {
+ set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
+ machine_id = SYS_DESC_TABLE.table[0];
+ machine_submodel_id = SYS_DESC_TABLE.table[1];
+ BIOS_revision = SYS_DESC_TABLE.table[2];
+ }
+ bootloader_type = LOADER_TYPE;
+
+#ifdef CONFIG_BLK_DEV_RAM
+ rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+ rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+ rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+ ARCH_SETUP
+ if (efi_enabled)
+ efi_init();
+ else {
+ printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+ print_memory_map(memory_setup());
+ }
+
+ copy_edd();
+
+ if (!MOUNT_ROOT_RDONLY)
+ root_mountflags &= ~MS_RDONLY;
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+
+ code_resource.start = virt_to_phys(_text);
+ code_resource.end = virt_to_phys(_etext)-1;
+ data_resource.start = virt_to_phys(_etext);
+ data_resource.end = virt_to_phys(_edata)-1;
+
+ parse_early_param();
+
+ if (user_defined_memmap) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ print_memory_map("user");
+ }
+
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
+ max_low_pfn = setup_memory();
+
+#ifdef CONFIG_VMI
+ /*
+ * Must be after max_low_pfn is determined, and before kernel
+ * pagetables are setup.
+ */
+ vmi_init();
+#endif
+
+ /*
+ * NOTE: before this point _nobody_ is allowed to allocate
+ * any memory using the bootmem allocator. Although the
+ * alloctor is now initialised only the first 8Mb of the kernel
+ * virtual address space has been mapped. All allocations before
+ * paging_init() has completed must use the alloc_bootmem_low_pages()
+ * variant (which allocates DMA'able memory) and care must be taken
+ * not to exceed the 8Mb limit.
+ */
+
+#ifdef CONFIG_SMP
+ smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
+#endif
+ paging_init();
+ remapped_pgdat_init();
+ sparse_init();
+ zone_sizes_init();
+
+ /*
+ * NOTE: at this point the bootmem allocator is fully available.
+ */
+
+ paravirt_post_allocator_init();
+
+ dmi_scan_machine();
+
+#ifdef CONFIG_X86_GENERICARCH
+ generic_apic_probe();
+#endif
+ if (efi_enabled)
+ efi_map_memmap();
+
+#ifdef CONFIG_ACPI
+ /*
+ * Parse the ACPI tables for possible boot-time SMP configuration.
+ */
+ acpi_boot_table_init();
+#endif
+
+#ifdef CONFIG_PCI
+#ifdef CONFIG_X86_IO_APIC
+ check_acpi_pci(); /* Checks more than just ACPI actually */
+#endif
+#endif
+
+#ifdef CONFIG_ACPI
+ acpi_boot_init();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+ if (def_to_bigsmp)
+ printk(KERN_WARNING "More than 8 CPUs detected and "
+ "CONFIG_X86_PC cannot handle it.\nUse "
+ "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+#endif
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (smp_found_config)
+ get_smp_config();
+#endif
+
+ e820_register_memory();
+ e820_mark_nosave_regions();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+}
projects / ~emulex / infiniband.git / commitdiff