]> git.openfabrics.org - ~emulex/infiniband.git/commitdiff
staging: comedi: usbduxfast: remove usbduxfast_attach
authorH Hartley Sweeten <hartleys@visionengravers.com>
Wed, 19 Sep 2012 23:20:57 +0000 (16:20 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 21 Sep 2012 16:24:16 +0000 (09:24 -0700)
This driver originally used the 'attach' method in order to get
the firmware for the device from the comedi_config utility. It
now uses request_firmware_nowait() in the usb_driver probe to
get this firmware.

Since this driver has an 'attach_usb' method in the comedi_driver,
the 'attach' method can be removed because it is now optional.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/usbduxfast.c

index 3f68fc396301bebe65ddb97d2338d5f7d2877709..0f6c1392f6ce5ab8aef48dd9c1c789e708b4d8db 100644 (file)
@@ -1430,10 +1430,8 @@ static void tidy_up(struct usbduxfastsub_s *udfs)
        udfs->ai_cmd_running = 0;
 }
 
-/* common part of attach and attach_usb */
 static int usbduxfast_attach_common(struct comedi_device *dev,
-                                   struct usbduxfastsub_s *udfs,
-                                   void *aux_data, int aux_len)
+                                   struct usbduxfastsub_s *udfs)
 {
        int ret;
        struct comedi_subdevice *s;
@@ -1441,9 +1439,6 @@ static int usbduxfast_attach_common(struct comedi_device *dev,
        down(&udfs->sem);
        /* pointer back to the corresponding comedi device */
        udfs->comedidev = dev;
-       /* trying to upload the firmware into the chip */
-       if (aux_data)
-               firmwareUpload(udfs, aux_data, aux_len);
        dev->board_name = "usbduxfast";
        ret = comedi_alloc_subdevices(dev, 1);
        if (ret) {
@@ -1485,48 +1480,6 @@ static int usbduxfast_attach_common(struct comedi_device *dev,
        return 0;
 }
 
-/* is called for COMEDI_DEVCONFIG ioctl (when comedi_config is run) */
-static int usbduxfast_attach(struct comedi_device *dev,
-                            struct comedi_devconfig *it)
-{
-       int ret;
-       int index;
-       int i;
-       void *aux_data;
-       int aux_len;
-
-       dev->private = NULL;
-
-       aux_data = comedi_aux_data(it->options, 0);
-       aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
-       if (aux_data == NULL)
-               aux_len = 0;
-       else if (aux_len == 0)
-               aux_data = NULL;
-       down(&start_stop_sem);
-       /*
-        * find a valid device which has been detected by the
-        * probe function of the usb
-        */
-       index = -1;
-       for (i = 0; i < NUMUSBDUXFAST; i++) {
-               if (usbduxfastsub[i].probed && !usbduxfastsub[i].attached) {
-                       index = i;
-                       break;
-               }
-       }
-       if (index < 0) {
-               dev_err(dev->class_dev,
-                       "usbduxfast: error: attach failed, no usbduxfast devs connected to the usb bus.\n");
-               ret = -ENODEV;
-       } else
-               ret = usbduxfast_attach_common(dev, &usbduxfastsub[index],
-                                              aux_data, aux_len);
-       up(&start_stop_sem);
-       return ret;
-}
-
-/* is called from comedi_usb_auto_config() */
 static int usbduxfast_attach_usb(struct comedi_device *dev,
                                 struct usb_interface *uinterf)
 {
@@ -1545,7 +1498,7 @@ static int usbduxfast_attach_usb(struct comedi_device *dev,
                       "usbduxfast: error: attach_usb failed, already attached\n");
                ret = -ENODEV;
        } else
-               ret = usbduxfast_attach_common(dev, udfs, NULL, 0);
+               ret = usbduxfast_attach_common(dev, udfs);
        up(&start_stop_sem);
        return ret;
 }
@@ -1568,9 +1521,8 @@ static void usbduxfast_detach(struct comedi_device *dev)
 static struct comedi_driver usbduxfast_driver = {
        .driver_name    = "usbduxfast",
        .module         = THIS_MODULE,
-       .attach         = usbduxfast_attach,
-       .detach         = usbduxfast_detach,
        .attach_usb     = usbduxfast_attach_usb,
+       .detach         = usbduxfast_detach,
 };
 
 static void usbduxfast_firmware_request_complete_handler(const struct firmware