]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
gpio/langwell: convert to use irq_domain
authorMika Westerberg <mika.westerberg@linux.intel.com>
Wed, 2 May 2012 08:15:50 +0000 (11:15 +0300)
committerGrant Likely <grant.likely@secretlab.ca>
Tue, 8 May 2012 17:41:47 +0000 (11:41 -0600)
irq_domain already provides a facility to translate from hardware IRQ
numbers to Linux IRQ numbers so use that instead of open-coding the logic
in the driver.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
drivers/gpio/Kconfig
drivers/gpio/gpio-langwell.c

index 7875c3f936623b53a1417d464eb96ff00973ce72..8ee6d29c3714839c3b3e97e1516ed772ea7de469 100644 (file)
@@ -404,6 +404,7 @@ config GPIO_BT8XX
 config GPIO_LANGWELL
        bool "Intel Langwell/Penwell GPIO support"
        depends on PCI && X86
+       select IRQ_DOMAIN
        help
          Say Y here to support Intel Langwell/Penwell GPIO.
 
index 52f00d3cf6671fd4a30cb687009a5a168d003ae4..b0673574dc700c851a72415212577a7ab4610d6b 100644 (file)
@@ -36,6 +36,7 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/irqdomain.h>
 
 /*
  * Langwell chip has 64 pins and thus there are 2 32bit registers to control
@@ -66,8 +67,8 @@ struct lnw_gpio {
        struct gpio_chip                chip;
        void                            *reg_base;
        spinlock_t                      lock;
-       unsigned                        irq_base;
        struct pci_dev                  *pdev;
+       struct irq_domain               *domain;
 };
 
 static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
@@ -176,13 +177,13 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip,
 static int lnw_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
        struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
-       return lnw->irq_base + offset;
+       return irq_create_mapping(lnw->domain, offset);
 }
 
 static int lnw_irq_type(struct irq_data *d, unsigned type)
 {
        struct lnw_gpio *lnw = irq_data_get_irq_chip_data(d);
-       u32 gpio = d->irq - lnw->irq_base;
+       u32 gpio = irqd_to_hwirq(d);
        unsigned long flags;
        u32 value;
        void __iomem *grer = gpio_reg(&lnw->chip, gpio, GRER);
@@ -256,7 +257,8 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
                        pending &= ~mask;
                        /* Clear before handling so we can't lose an edge */
                        writel(mask, gedr);
-                       generic_handle_irq(lnw->irq_base + base + gpio);
+                       generic_handle_irq(irq_find_mapping(lnw->domain,
+                                                           base + gpio));
                }
        }
 
@@ -281,6 +283,24 @@ static void lnw_irq_init_hw(struct lnw_gpio *lnw)
        }
 }
 
+static int lnw_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+                           irq_hw_number_t hw)
+{
+       struct lnw_gpio *lnw = d->host_data;
+
+       irq_set_chip_and_handler_name(virq, &lnw_irqchip, handle_simple_irq,
+                                     "demux");
+       irq_set_chip_data(virq, lnw);
+       irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+       return 0;
+}
+
+static const struct irq_domain_ops lnw_gpio_irq_ops = {
+       .map = lnw_gpio_irq_map,
+       .xlate = irq_domain_xlate_twocell,
+};
+
 #ifdef CONFIG_PM
 static int lnw_gpio_runtime_resume(struct device *dev)
 {
@@ -318,10 +338,8 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
                        const struct pci_device_id *id)
 {
        void *base;
-       int i;
        resource_size_t start, len;
        struct lnw_gpio *lnw;
-       u32 irq_base;
        u32 gpio_base;
        int retval = 0;
        int ngpio = id->driver_data;
@@ -335,7 +353,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
                dev_err(&pdev->dev, "error requesting resources\n");
                goto err2;
        }
-       /* get the irq_base from bar1 */
+       /* get the gpio_base from bar1 */
        start = pci_resource_start(pdev, 1);
        len = pci_resource_len(pdev, 1);
        base = ioremap_nocache(start, len);
@@ -343,7 +361,6 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
                dev_err(&pdev->dev, "error mapping bar1\n");
                goto err3;
        }
-       irq_base = *(u32 *)base;
        gpio_base = *((u32 *)base + 1);
        /* release the IO mapping, since we already get the info from bar1 */
        iounmap(base);
@@ -364,12 +381,10 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
                goto err3;
        }
 
-       retval = irq_alloc_descs(-1, irq_base, ngpio, 0);
-       if (retval < 0) {
-               dev_err(&pdev->dev, "can't allocate IRQ descs\n");
+       lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
+                                           &lnw_gpio_irq_ops, lnw);
+       if (!lnw->domain)
                goto err3;
-       }
-       lnw->irq_base = retval;
 
        lnw->reg_base = base;
        lnw->chip.label = dev_name(&pdev->dev);
@@ -387,18 +402,13 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
        retval = gpiochip_add(&lnw->chip);
        if (retval) {
                dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);
-               goto err4;
+               goto err3;
        }
 
        lnw_irq_init_hw(lnw);
 
        irq_set_handler_data(pdev->irq, lnw);
        irq_set_chained_handler(pdev->irq, lnw_irq_handler);
-       for (i = 0; i < lnw->chip.ngpio; i++) {
-               irq_set_chip_and_handler_name(i + lnw->irq_base, &lnw_irqchip,
-                                             handle_simple_irq, "demux");
-               irq_set_chip_data(i + lnw->irq_base, lnw);
-       }
 
        spin_lock_init(&lnw->lock);
 
@@ -407,8 +417,6 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 
        return 0;
 
-err4:
-       irq_free_descs(lnw->irq_base, ngpio);
 err3:
        pci_release_regions(pdev);
 err2: