* --------------------------------------------------------------------
*/
-/*================================================================*/
-/* System Includes */
-
#include <linux/if_arp.h>
#include <linux/module.h>
#include <linux/kernel.h>
----------------------------------------------------------------*/
int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_scan_t *msg = msgp;
- u16 roamingmode, word;
- int i, timeout;
- int istmpenable = 0;
-
- hfa384x_HostScanRequest_data_t scanreq;
-
- /* gatekeeper check */
- if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
- hw->ident_sta_fw.minor,
- hw->ident_sta_fw.variant) <
- HFA384x_FIRMWARE_VERSION(1,3,2)) {
- printk(KERN_ERR "HostScan not supported with current firmware (<1.3.2).\n");
- result = 1;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ int result = 0;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_dot11req_scan_t *msg = msgp;
+ u16 roamingmode, word;
+ int i, timeout;
+ int istmpenable = 0;
+
+ hfa384x_HostScanRequest_data_t scanreq;
+
+ /* gatekeeper check */
+ if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+ hw->ident_sta_fw.minor,
+ hw->ident_sta_fw.variant) <
+ HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
+ printk(KERN_ERR
+ "HostScan not supported with current firmware (<1.3.2).\n");
+ result = 1;
+ msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ goto exit;
+ }
+
+ memset(&scanreq, 0, sizeof(scanreq));
+
+ /* save current roaming mode */
+ result = hfa384x_drvr_getconfig16(hw,
+ HFA384x_RID_CNFROAMINGMODE,
+ &roamingmode);
+ if (result) {
+ printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
+ result);
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
- memset(&scanreq, 0, sizeof(scanreq));
-
- /* save current roaming mode */
- result = hfa384x_drvr_getconfig16(hw,
- HFA384x_RID_CNFROAMINGMODE, &roamingmode);
- if ( result ) {
- printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
- result);
- msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
- goto exit;
- }
-
- /* drop into mode 3 for the scan */
- result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFROAMINGMODE,
- HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
- if ( result ) {
- printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
- result);
- msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
- goto exit;
- }
-
- /* active or passive? */
- if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
- hw->ident_sta_fw.minor,
- hw->ident_sta_fw.variant) >
- HFA384x_FIRMWARE_VERSION(1,5,0)) {
- if (msg->scantype.data != P80211ENUM_scantype_active) {
- word = host2hfa384x_16(msg->maxchanneltime.data);
- } else {
- word = 0;
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL, word);
- if ( result ) {
- printk(KERN_WARNING "Passive scan not supported with "
- "current firmware. (<1.5.1)\n");
- }
- }
+ /* drop into mode 3 for the scan */
+ result = hfa384x_drvr_setconfig16(hw,
+ HFA384x_RID_CNFROAMINGMODE,
+ HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+ if (result) {
+ printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
+ result);
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
+ goto exit;
+ }
+
+ /* active or passive? */
+ if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+ hw->ident_sta_fw.minor,
+ hw->ident_sta_fw.variant) >
+ HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
+ if (msg->scantype.data != P80211ENUM_scantype_active)
+ word = host2hfa384x_16(msg->maxchanneltime.data);
+ else
+ word = 0;
+
+ result =
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
+ word);
+ if (result) {
+ printk(KERN_WARNING "Passive scan not supported with "
+ "current firmware. (<1.5.1)\n");
+ }
+ }
/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
word = HFA384x_RATEBIT_2;
scanreq.txRate = host2hfa384x_16(word);
- /* set up the channel list */
- word = 0;
- for (i = 0; i < msg->channellist.data.len; i++) {
- u8 channel = msg->channellist.data.data[i];
- if (channel > 14) continue;
- /* channel 1 is BIT 0 ... channel 14 is BIT 13 */
- word |= (1 << (channel-1));
- }
- scanreq.channelList = host2hfa384x_16(word);
+ /* set up the channel list */
+ word = 0;
+ for (i = 0; i < msg->channellist.data.len; i++) {
+ u8 channel = msg->channellist.data.data[i];
+ if (channel > 14)
+ continue;
+ /* channel 1 is BIT 0 ... channel 14 is BIT 13 */
+ word |= (1 << (channel - 1));
+ }
+ scanreq.channelList = host2hfa384x_16(word);
- /* set up the ssid, if present. */
- scanreq.ssid.len = host2hfa384x_16(msg->ssid.data.len);
- memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
+ /* set up the ssid, if present. */
+ scanreq.ssid.len = host2hfa384x_16(msg->ssid.data.len);
+ memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
/* Enable the MAC port if it's not already enabled */
result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "getconfig(PORTSTATUS) failed. "
- "result=%d\n", result);
+ "result=%d\n", result);
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
if (word == HFA384x_PORTSTATUS_DISABLED) {
u16 wordbuf[17];
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFROAMINGMODE,
- HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
- if ( result ) {
- printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n", result);
+ HFA384x_RID_CNFROAMINGMODE,
+ HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+ if (result) {
+ printk(KERN_ERR
+ "setconfig(ROAMINGMODE) failed. result=%d\n",
+ result);
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* Construct a bogus SSID and assign it to OwnSSID and
*/
wordbuf[0] = host2hfa384x_16(WLAN_SSID_MAXLEN);
get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
- wordbuf, HFA384x_RID_CNFOWNSSID_LEN);
- if ( result ) {
+ result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
+ wordbuf,
+ HFA384x_RID_CNFOWNSSID_LEN);
+ if (result) {
printk(KERN_ERR "Failed to set OwnSSID.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
- wordbuf, HFA384x_RID_CNFDESIREDSSID_LEN);
- if ( result ) {
+ result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+ wordbuf,
+ HFA384x_RID_CNFDESIREDSSID_LEN);
+ if (result) {
printk(KERN_ERR "Failed to set DesiredSSID.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* bsstype */
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFPORTTYPE,
- HFA384x_PORTTYPE_IBSS);
- if ( result ) {
+ HFA384x_RID_CNFPORTTYPE,
+ HFA384x_PORTTYPE_IBSS);
+ if (result) {
printk(KERN_ERR "Failed to set CNFPORTTYPE.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
/* ibss options */
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CREATEIBSS,
- HFA384x_CREATEIBSS_JOINCREATEIBSS);
- if ( result ) {
+ HFA384x_RID_CREATEIBSS,
+ HFA384x_CREATEIBSS_JOINCREATEIBSS);
+ if (result) {
printk(KERN_ERR "Failed to set CREATEIBSS.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "drvr_enable(0) failed. "
- "result=%d\n", result);
+ "result=%d\n", result);
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
istmpenable = 1;
}
- /* Figure out our timeout first Kus, then HZ */
- timeout = msg->channellist.data.len * msg->maxchanneltime.data;
- timeout = (timeout * HZ)/1000;
+ /* Figure out our timeout first Kus, then HZ */
+ timeout = msg->channellist.data.len * msg->maxchanneltime.data;
+ timeout = (timeout * HZ) / 1000;
- /* Issue the scan request */
- hw->scanflag = 0;
+ /* Issue the scan request */
+ hw->scanflag = 0;
- result = hfa384x_drvr_setconfig( hw,
- HFA384x_RID_HOSTSCAN, &scanreq,
- sizeof(hfa384x_HostScanRequest_data_t));
- if ( result ) {
- printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
- result);
- msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
- goto exit;
- }
+ result = hfa384x_drvr_setconfig(hw,
+ HFA384x_RID_HOSTSCAN, &scanreq,
+ sizeof(hfa384x_HostScanRequest_data_t));
+ if (result) {
+ printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
+ result);
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
+ goto exit;
+ }
- /* sleep until info frame arrives */
- wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
+ /* sleep until info frame arrives */
+ wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
if (hw->scanflag == -1)
msg->numbss.data = hw->scanflag;
- hw->scanflag = 0;
+ hw->scanflag = 0;
/* Disable port if we temporarily enabled it. */
if (istmpenable) {
result = hfa384x_drvr_disable(hw, 0);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "drvr_disable(0) failed. "
- "result=%d\n", result);
+ "result=%d\n", result);
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
goto exit;
}
}
/* restore original roaming mode */
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
roamingmode);
- if ( result ) {
- printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
- result);
- msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
- goto exit;
- }
-
- result = 0;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- exit:
+ if (result) {
+ printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
+ result);
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
+ goto exit;
+ }
+
+ result = 0;
+ msg->resultcode.data = P80211ENUM_resultcode_success;
+
+exit:
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return result;
}
-
/*----------------------------------------------------------------
* prism2mgmt_scan_results
*
----------------------------------------------------------------*/
int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
- p80211msg_dot11req_scan_results_t *req;
- hfa384x_t *hw = wlandev->priv;
+ int result = 0;
+ p80211msg_dot11req_scan_results_t *req;
+ hfa384x_t *hw = wlandev->priv;
hfa384x_HScanResultSub_t *item = NULL;
int count;
- req = (p80211msg_dot11req_scan_results_t *) msgp;
+ req = (p80211msg_dot11req_scan_results_t *) msgp;
req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- if (! hw->scanresults) {
- printk(KERN_ERR "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
+ if (!hw->scanresults) {
+ printk(KERN_ERR
+ "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
result = 2;
req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
goto exit;
}
- count = (hw->scanresults->framelen - 3) / 32;
- if (count > 32) count = 32;
+ count = (hw->scanresults->framelen - 3) / 32;
+ if (count > 32)
+ count = 32;
if (req->bssindex.data >= count) {
pr_debug("requested index (%d) out of range (%d)\n",
- req->bssindex.data, count);
+ req->bssindex.data, count);
result = 2;
req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
goto exit;
memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
/* supported rates */
- for (count = 0; count < 10 ; count++)
- if (item->supprates[count] == 0)
- break;
+ for (count = 0; count < 10; count++)
+ if (item->supprates[count] == 0)
+ break;
#define REQBASICRATE(N) \
if ((count >= N) && DOT11_RATE5_ISBASIC_GET(item->supprates[(N)-1])) { \
req->cfpollreq.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(count);
/* bsstype */
- req->bsstype.status = P80211ENUM_msgitem_status_data_ok;
+ req->bsstype.status = P80211ENUM_msgitem_status_data_ok;
req->bsstype.data = (WLAN_GET_MGMT_CAP_INFO_ESS(count)) ?
- P80211ENUM_bsstype_infrastructure :
- P80211ENUM_bsstype_independent;
-
- // item->proberesp_rate
-/*
- req->fhdwelltime
- req->fhhopset
- req->fhhoppattern
- req->fhhopindex
- req->cfpdurremaining
-*/
+ P80211ENUM_bsstype_infrastructure : P80211ENUM_bsstype_independent;
result = 0;
req->resultcode.data = P80211ENUM_resultcode_success;
- exit:
+exit:
return result;
}
----------------------------------------------------------------*/
int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_start_t *msg = msgp;
+ int result = 0;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_dot11req_start_t *msg = msgp;
- p80211pstrd_t *pstr;
- u8 bytebuf[80];
- hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
- u16 word;
+ p80211pstrd_t *pstr;
+ u8 bytebuf[80];
+ hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
+ u16 word;
wlandev->macmode = WLAN_MACMODE_NONE;
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
hw->ident_sta_fw.variant) <
- HFA384x_FIRMWARE_VERSION(0,8,3)) {
+ HFA384x_FIRMWARE_VERSION(0, 8, 3)) {
/* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
/*** STATION ***/
/* Set the REQUIRED config items */
/* SSID */
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
+ pstr = (p80211pstrd_t *)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
- bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
- if ( result ) {
+ result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
+ bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+ if (result) {
printk(KERN_ERR "Failed to set CnfOwnSSID\n");
goto failed;
}
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
- bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
- if ( result ) {
+ result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+ bytebuf,
+ HFA384x_RID_CNFDESIREDSSID_LEN);
+ if (result) {
printk(KERN_ERR "Failed to set CnfDesiredSSID\n");
goto failed;
}
/* beacon period */
word = msg->beaconperiod.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNint, word);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "Failed to set beacon period=%d.\n", word);
goto failed;
}
/* dschannel */
word = msg->dschannel.data;
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "Failed to set channel=%d.\n", word);
goto failed;
}
/* Basic rates */
word = p80211rate_to_p2bit(msg->basicrate1.data);
- if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+ if (msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate2.data);
- }
- if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate3.data);
- }
- if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate4.data);
- }
- if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate5.data);
- }
- if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate6.data);
- }
- if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate7.data);
- }
- if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->basicrate8.data);
- }
+
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "Failed to set basicrates=%d.\n", word);
goto failed;
}
/* Operational rates (supprates and txratecontrol) */
word = p80211rate_to_p2bit(msg->operationalrate1.data);
- if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+ if (msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate2.data);
- }
- if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate3.data);
- }
- if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate4.data);
- }
- if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate5.data);
- }
- if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate6.data);
- }
- if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate7.data);
- }
- if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+
+ if (msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok)
word |= p80211rate_to_p2bit(msg->operationalrate8.data);
- }
+
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "Failed to set supprates=%d.\n", word);
goto failed;
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "Failed to set txrates=%d.\n", word);
goto failed;
}
/* Set the macmode so the frame setup code knows what to do */
- if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
+ if (msg->bsstype.data == P80211ENUM_bsstype_independent) {
wlandev->macmode = WLAN_MACMODE_IBSS_STA;
/* lets extend the data length a bit */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
+ if (result) {
printk(KERN_ERR "Enable macport failed, result=%d.\n", result);
goto failed;
}
----------------------------------------------------------------*/
int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_readpda_t *msg = msgp;
- int result;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_p2req_readpda_t *msg = msgp;
+ int result;
/* We only support collecting the PDA when in the FWLOAD
* state.
*/
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
- "PDA may only be read "
- "in the fwload state.\n");
+ "PDA may only be read " "in the fwload state.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
} else {
/* Call drvr_readpda(), it handles the auxport enable
* and validating the returned PDA.
*/
- result = hfa384x_drvr_readpda(
- hw,
- msg->pda.data,
- HFA384x_PDA_LEN_MAX);
+ result = hfa384x_drvr_readpda(hw,
+ msg->pda.data,
+ HFA384x_PDA_LEN_MAX);
if (result) {
printk(KERN_ERR
- "hfa384x_drvr_readpda() failed, "
- "result=%d\n",
- result);
+ "hfa384x_drvr_readpda() failed, "
+ "result=%d\n", result);
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status =
- P80211ENUM_msgitem_status_data_ok;
+ P80211ENUM_msgitem_status_data_ok;
return 0;
}
msg->pda.status = P80211ENUM_msgitem_status_data_ok;
----------------------------------------------------------------*/
int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_ramdl_state_t *msg = msgp;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_p2req_ramdl_state_t *msg = msgp;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
- "ramdl_state(): may only be called "
- "in the fwload state.\n");
+ "ramdl_state(): may only be called "
+ "in the fwload state.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
/*
- ** Note: Interrupts are locked out if this is an AP and are NOT
- ** locked out if this is a station.
- */
+ ** Note: Interrupts are locked out if this is an AP and are NOT
+ ** locked out if this is a station.
+ */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- if ( msg->enable.data == P80211ENUM_truth_true ) {
- if ( hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data) ) {
- msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+ if (msg->enable.data == P80211ENUM_truth_true) {
+ if (hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data)) {
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
} else {
msg->resultcode.data = P80211ENUM_resultcode_success;
}
return 0;
}
-
/*----------------------------------------------------------------
* prism2mgmt_ramdl_write
*
----------------------------------------------------------------*/
int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_ramdl_write_t *msg = msgp;
- u32 addr;
- u32 len;
- u8 *buf;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_p2req_ramdl_write_t *msg = msgp;
+ u32 addr;
+ u32 len;
+ u8 *buf;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
- "ramdl_write(): may only be called "
- "in the fwload state.\n");
+ "ramdl_write(): may only be called "
+ "in the fwload state.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/* first validate the length */
- if ( msg->len.data > sizeof(msg->data.data) ) {
- msg->resultcode.status = P80211ENUM_resultcode_invalid_parameters;
+ if (msg->len.data > sizeof(msg->data.data)) {
+ msg->resultcode.status =
+ P80211ENUM_resultcode_invalid_parameters;
return 0;
}
/* call the hfa384x function to do the write */
addr = msg->addr.data;
len = msg->len.data;
buf = msg->data.data;
- if ( hfa384x_drvr_ramdl_write(hw, addr, buf, len) ) {
+ if (hfa384x_drvr_ramdl_write(hw, addr, buf, len))
msg->resultcode.data = P80211ENUM_resultcode_refused;
- }
msg->resultcode.data = P80211ENUM_resultcode_success;
return 0;
}
-
/*----------------------------------------------------------------
* prism2mgmt_flashdl_state
*
----------------------------------------------------------------*/
int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_flashdl_state_t *msg = msgp;
+ int result = 0;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_p2req_flashdl_state_t *msg = msgp;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
- "flashdl_state(): may only be called "
- "in the fwload state.\n");
+ "flashdl_state(): may only be called "
+ "in the fwload state.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
/*
- ** Note: Interrupts are locked out if this is an AP and are NOT
- ** locked out if this is a station.
- */
+ ** Note: Interrupts are locked out if this is an AP and are NOT
+ ** locked out if this is a station.
+ */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- if ( msg->enable.data == P80211ENUM_truth_true ) {
- if ( hfa384x_drvr_flashdl_enable(hw) ) {
- msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+ if (msg->enable.data == P80211ENUM_truth_true) {
+ if (hfa384x_drvr_flashdl_enable(hw)) {
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
} else {
msg->resultcode.data = P80211ENUM_resultcode_success;
}
result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
if (result != P80211ENUM_resultcode_success) {
printk(KERN_ERR "prism2sta_ifstate(fwload) failed,"
- "P80211ENUM_resultcode=%d\n", result);
+ "P80211ENUM_resultcode=%d\n", result);
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
result = -1;
}
}
return 0;
}
-
/*----------------------------------------------------------------
* prism2mgmt_flashdl_write
*
----------------------------------------------------------------*/
int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_flashdl_write_t *msg = msgp;
- u32 addr;
- u32 len;
- u8 *buf;
+ hfa384x_t *hw = wlandev->priv;
+ p80211msg_p2req_flashdl_write_t *msg = msgp;
+ u32 addr;
+ u32 len;
+ u8 *buf;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
printk(KERN_ERR
- "flashdl_write(): may only be called "
- "in the fwload state.\n");
+ "flashdl_write(): may only be called "
+ "in the fwload state.\n");
msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
return 0;
}
/*
- ** Note: Interrupts are locked out if this is an AP and are NOT
- ** locked out if this is a station.
- */
+ ** Note: Interrupts are locked out if this is an AP and are NOT
+ ** locked out if this is a station.
+ */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
/* first validate the length */
- if ( msg->len.data > sizeof(msg->data.data) ) {
+ if (msg->len.data > sizeof(msg->data.data)) {
msg->resultcode.status =
- P80211ENUM_resultcode_invalid_parameters;
+ P80211ENUM_resultcode_invalid_parameters;
return 0;
}
/* call the hfa384x function to do the write */
addr = msg->addr.data;
len = msg->len.data;
buf = msg->data.data;
- if ( hfa384x_drvr_flashdl_write(hw, addr, buf, len) ) {
+ if (hfa384x_drvr_flashdl_write(hw, addr, buf, len))
msg->resultcode.data = P80211ENUM_resultcode_refused;
- }
msg->resultcode.data = P80211ENUM_resultcode_success;
return 0;
----------------------------------------------------------------*/
int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
{
- hfa384x_t *hw = wlandev->priv;
- int result = 0;
- u16 reg;
- u16 port_type;
- p80211msg_lnxreq_autojoin_t *msg = msgp;
- p80211pstrd_t *pstr;
- u8 bytebuf[256];
- hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
+ hfa384x_t *hw = wlandev->priv;
+ int result = 0;
+ u16 reg;
+ u16 port_type;
+ p80211msg_lnxreq_autojoin_t *msg = msgp;
+ p80211pstrd_t *pstr;
+ u8 bytebuf[256];
+ hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
wlandev->macmode = WLAN_MACMODE_NONE;
hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
/* Set the auth type */
- if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
+ if (msg->authtype.data == P80211ENUM_authalg_sharedkey)
reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
- } else {
+ else
reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
- }
+
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
/* Set the ssid */
memset(bytebuf, 0, 256);
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
+ pstr = (p80211pstrd_t *)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig(
- hw, HFA384x_RID_CNFDESIREDSSID,
- bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+ result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+ bytebuf,
+ HFA384x_RID_CNFDESIREDSSID_LEN);
port_type = HFA384x_PORTTYPE_BSS;
/* Set the PortType */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
return result;
}
-
/*----------------------------------------------------------------
* prism2mgmt_wlansniff
*
----------------------------------------------------------------*/
int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
- p80211msg_lnxreq_wlansniff_t *msg = msgp;
+ int result = 0;
+ p80211msg_lnxreq_wlansniff_t *msg = msgp;
- hfa384x_t *hw = wlandev->priv;
- u16 word;
+ hfa384x_t *hw = wlandev->priv;
+ u16 word;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- switch (msg->enable.data)
- {
+ switch (msg->enable.data) {
case P80211ENUM_truth_false:
/* Confirm that we're in monitor mode */
- if ( wlandev->netdev->type == ARPHRD_ETHER ) {
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+ if (wlandev->netdev->type == ARPHRD_ETHER) {
+ msg->resultcode.data =
+ P80211ENUM_resultcode_invalid_parameters;
result = 0;
goto exit;
}
/* Disable monitor mode */
result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
- if ( result ) {
- pr_debug(
- "failed to disable monitor mode, result=%d\n",
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to disable monitor mode, result=%d\n",
+ result);
goto failed;
}
/* Disable port 0 */
result = hfa384x_drvr_disable(hw, 0);
- if ( result ) {
- pr_debug(
- "failed to disable port 0 after sniffing, result=%d\n",
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to disable port 0 after sniffing, result=%d\n",
+ result);
goto failed;
}
/* Clear the driver state */
/* Restore the wepflags */
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFWEPFLAGS,
- hw->presniff_wepflags);
- if ( result ) {
- pr_debug(
- "failed to restore wepflags=0x%04x, result=%d\n",
- hw->presniff_wepflags,
- result);
+ HFA384x_RID_CNFWEPFLAGS,
+ hw->presniff_wepflags);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to restore wepflags=0x%04x, result=%d\n",
+ hw->presniff_wepflags, result);
goto failed;
}
/* Set the port to its prior type and enable (if necessary) */
- if (hw->presniff_port_type != 0 ) {
+ if (hw->presniff_port_type != 0) {
word = hw->presniff_port_type;
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFPORTTYPE, word);
- if ( result ) {
- pr_debug(
- "failed to restore porttype, result=%d\n",
- result);
+ HFA384x_RID_CNFPORTTYPE,
+ word);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to restore porttype, result=%d\n",
+ result);
goto failed;
}
/* Enable the port */
result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- pr_debug("failed to enable port to presniff setting, result=%d\n", result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to enable port to presniff setting, result=%d\n",
+ result);
goto failed;
}
} else {
break;
case P80211ENUM_truth_true:
/* Disable the port (if enabled), only check Port 0 */
- if ( hw->port_enabled[0]) {
+ if (hw->port_enabled[0]) {
if (wlandev->netdev->type == ARPHRD_ETHER) {
/* Save macport 0 state */
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFPORTTYPE,
- &(hw->presniff_port_type));
- if ( result ) {
- pr_debug("failed to read porttype, result=%d\n", result);
+ &(hw->
+ presniff_port_type));
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to read porttype, result=%d\n",
+ result);
goto failed;
}
/* Save the wepflags state */
result = hfa384x_drvr_getconfig16(hw,
HFA384x_RID_CNFWEPFLAGS,
- &(hw->presniff_wepflags));
- if ( result ) {
- pr_debug("failed to read wepflags, result=%d\n", result);
+ &(hw->
+ presniff_wepflags));
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to read wepflags, result=%d\n",
+ result);
goto failed;
}
hfa384x_drvr_stop(hw);
result = hfa384x_drvr_start(hw);
- if ( result ) {
- pr_debug(
- "failed to restart the card for sniffing, result=%d\n",
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to restart the card for sniffing, result=%d\n",
+ result);
goto failed;
}
} else {
/* Disable the port */
result = hfa384x_drvr_disable(hw, 0);
- if ( result ) {
- pr_debug(
- "failed to enable port for sniffing, result=%d\n",
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to enable port for sniffing, result=%d\n",
+ result);
goto failed;
}
}
/* Set the channel we wish to sniff */
word = msg->channel.data;
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFOWNCHANNEL, word);
- hw->sniff_channel=word;
+ HFA384x_RID_CNFOWNCHANNEL,
+ word);
+ hw->sniff_channel = word;
- if ( result ) {
- pr_debug(
- "failed to set channel %d, result=%d\n",
- word,
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to set channel %d, result=%d\n",
+ word, result);
goto failed;
}
/* Set the port type to pIbss */
word = HFA384x_PORTTYPE_PSUEDOIBSS;
result = hfa384x_drvr_setconfig16(hw,
- HFA384x_RID_CNFPORTTYPE, word);
- if ( result ) {
- pr_debug(
- "failed to set porttype %d, result=%d\n",
- word,
- result);
+ HFA384x_RID_CNFPORTTYPE,
+ word);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to set porttype %d, result=%d\n",
+ word, result);
goto failed;
}
- if ((msg->keepwepflags.status == P80211ENUM_msgitem_status_data_ok) && (msg->keepwepflags.data != P80211ENUM_truth_true)) {
+ if ((msg->keepwepflags.status ==
+ P80211ENUM_msgitem_status_data_ok)
+ && (msg->keepwepflags.data !=
+ P80211ENUM_truth_true)) {
/* Set the wepflags for no decryption */
word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT |
- HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFWEPFLAGS, word);
+ HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
+ result =
+ hfa384x_drvr_setconfig16(hw,
+ HFA384x_RID_CNFWEPFLAGS,
+ word);
}
- if ( result ) {
- pr_debug(
- "failed to set wepflags=0x%04x, result=%d\n",
- word,
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to set wepflags=0x%04x, result=%d\n",
+ word, result);
goto failed;
}
}
/* Do we want to strip the FCS in monitor mode? */
- if ((msg->stripfcs.status == P80211ENUM_msgitem_status_data_ok) && (msg->stripfcs.data == P80211ENUM_truth_true)) {
+ if ((msg->stripfcs.status == P80211ENUM_msgitem_status_data_ok)
+ && (msg->stripfcs.data == P80211ENUM_truth_true)) {
hw->sniff_fcs = 0;
} else {
hw->sniff_fcs = 1;
}
/* Do we want to truncate the packets? */
- if (msg->packet_trunc.status == P80211ENUM_msgitem_status_data_ok) {
+ if (msg->packet_trunc.status ==
+ P80211ENUM_msgitem_status_data_ok) {
hw->sniff_truncate = msg->packet_trunc.data;
} else {
hw->sniff_truncate = 0;
/* Enable the port */
result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- pr_debug(
- "failed to enable port for sniffing, result=%d\n",
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to enable port for sniffing, result=%d\n",
+ result);
goto failed;
}
/* Enable monitor mode */
result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
- if ( result ) {
- pr_debug(
- "failed to enable monitor mode, result=%d\n",
- result);
+ if (result) {
+ printk(KERN_DEBUG
+ "failed to enable monitor mode, result=%d\n",
+ result);
goto failed;
}
- if (wlandev->netdev->type == ARPHRD_ETHER) {
+ if (wlandev->netdev->type == ARPHRD_ETHER)
printk(KERN_INFO "monitor mode enabled\n");
- }
/* Set the driver state */
/* Do we want the prism2 header? */
- if ((msg->prismheader.status == P80211ENUM_msgitem_status_data_ok) && (msg->prismheader.data == P80211ENUM_truth_true)) {
+ if ((msg->prismheader.status ==
+ P80211ENUM_msgitem_status_data_ok)
+ && (msg->prismheader.data == P80211ENUM_truth_true)) {
hw->sniffhdr = 0;
wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
- } else if ((msg->wlanheader.status == P80211ENUM_msgitem_status_data_ok) && (msg->wlanheader.data == P80211ENUM_truth_true)) {
+ } else
+ if ((msg->wlanheader.status ==
+ P80211ENUM_msgitem_status_data_ok)
+ && (msg->wlanheader.data == P80211ENUM_truth_true)) {
hw->sniffhdr = 1;
wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
} else {
projects / ~shefty / rdma-dev.git / commitdiff