if COMEDI_PCI_DRIVERS
+config COMEDI_8255_PCI
+ tristate "Generic PCI based 8255 digital i/o board support"
+ select COMEDI_8255
+ ---help---
+ Enable support for PCI based 8255 digital i/o boards. This driver
+ provides a PCI wrapper around the generic 8255 driver.
+
+ Supported boards:
+ ADlink - PCI-7224, PCI-7248, and PCI-7296
+
+ To compile this driver as a module, choose M here: the module will
+ be called 8255_pci.
+
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
depends on VIRT_TO_BUS
To compile this driver as a module, choose M here: the module will be
called adl_pci7x3x.
-config COMEDI_ADL_PCI7296
- tristate "ADLink PCI-72xx opto-22 compatible digital i/o board support"
- select COMEDI_8255
- ---help---
- Enable support for ADlink PCI-72xx opto-22 compatible digital i/o
- boards. Supported boards include the 24-channel PCI-7224, 48-channel
- PCI-7248, and 96-channel PCI-7296.
-
- To compile this driver as a module, choose M here: the module will be
- called adl_pci7296.
-
config COMEDI_ADL_PCI8164
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
---help---
that has an 8255 chip. For multifunction boards, the main driver will
configure the 8255 subdevice automatically.
- Note that most PCI 8255 boards do NOT work with this driver, and
- need a separate driver as a wrapper.
+ Note that most PCI based 8255 boards use the 8255_pci driver as a
+ wrapper around this driver.
To compile this driver as a module, choose M here: the module will be
called 8255.
--- /dev/null
+/*
+ * COMEDI driver for the ADLINK PCI-72xx series boards.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+Driver: adl_pci7296
+Description: 24/48/96-Channel Opto-22 Compatible Digital I/O Boards
+Devices: (ADLink) PCI-7224 [adl_pci7224] - 24 channels
+ (ADLink) PCI-7248 [adl_pci7248] - 48 channels
+ (ADLink) PCI-7296 [adl_pci7296] - 96 channels
+Author: Jon Grierson <jd@renko.co.uk>
+Updated: Mon, 14 Apr 2008 15:05:56 +0100
+Status: testing
+
+This driver only attaches using the PCI PnP auto config support
+in the comedi core. The module parameter 'comedi_autoconfig'
+must be 1 (default) to enable this feature. The COMEDI_DEVCONFIG
+ioctl, used by the comedi_config utility, is not supported by
+this driver.
+
+These boards also have an 8254 programmable timer/counter chip.
+This chip is not currently supported by this driver.
+
+Interrupt support for these boards is also not currently supported.
+
+Configuration Options: not applicable
+*/
+
+#include "../comedidev.h"
+
+#include "8255.h"
+
+/*
+ * PCI Device ID's supported by this driver
+ */
+#define PCI_DEVICE_ID_PCI7224 0x7224
+#define PCI_DEVICE_ID_PCI7248 0x7248
+#define PCI_DEVICE_ID_PCI7296 0x7296
+
+struct adl_pci7296_boardinfo {
+ const char *name;
+ unsigned short device;
+ int nsubdevs;
+};
+
+static const struct adl_pci7296_boardinfo adl_pci7296_boards[] = {
+ {
+ .name = "adl_pci7224",
+ .device = PCI_DEVICE_ID_PCI7224,
+ .nsubdevs = 1,
+ }, {
+ .name = "adl_pci7248",
+ .device = PCI_DEVICE_ID_PCI7248,
+ .nsubdevs = 2,
+ }, {
+ .name = "adl_pci7296",
+ .device = PCI_DEVICE_ID_PCI7296,
+ .nsubdevs = 4,
+ },
+};
+
+static const void *adl_pci7296_find_boardinfo(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct adl_pci7296_boardinfo *board;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adl_pci7296_boards); i++) {
+ board = &adl_pci7296_boards[i];
+ if (pcidev->device == board->device)
+ return board;
+ }
+ return NULL;
+}
+
+static int adl_pci7296_attach_pci(struct comedi_device *dev,
+ struct pci_dev *pcidev)
+{
+ const struct adl_pci7296_boardinfo *board;
+ struct comedi_subdevice *s;
+ int ret;
+ int i;
+
+ comedi_set_hw_dev(dev, &pcidev->dev);
+
+ board = adl_pci7296_find_boardinfo(dev, pcidev);
+ if (!board)
+ return -ENODEV;
+ dev->board_ptr = board;
+ dev->board_name = board->name;
+
+ ret = comedi_pci_enable(pcidev, dev->board_name);
+ if (ret)
+ return ret;
+ dev->iobase = pci_resource_start(pcidev, 2);
+
+ /*
+ * One, two, or four subdevices are setup by this driver depending
+ * on the number of channels provided by the board. Each subdevice
+ * has 24 channels supported by the 8255 module.
+ */
+ ret = comedi_alloc_subdevices(dev, board->nsubdevs);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < board->nsubdevs; i++) {
+ s = &dev->subdevices[i];
+ ret = subdev_8255_init(dev, s, NULL, dev->iobase + (i * 4));
+ if (ret)
+ return ret;
+ }
+
+ dev_info(dev->class_dev, "%s attached (%d digital i/o channels)\n",
+ dev->board_name, board->nsubdevs * 24);
+
+ return 0;
+}
+
+static void adl_pci7296_detach(struct comedi_device *dev)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct adl_pci7296_boardinfo *board = comedi_board(dev);
+ struct comedi_subdevice *s;
+ int i;
+
+ if (dev->subdevices) {
+ for (i = 0; i < board->nsubdevs; i++) {
+ s = &dev->subdevices[i];
+ subdev_8255_cleanup(dev, s);
+ }
+ }
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ }
+}
+
+static struct comedi_driver adl_pci7296_driver = {
+ .driver_name = "adl_pci7296",
+ .module = THIS_MODULE,
+ .attach_pci = adl_pci7296_attach_pci,
+ .detach = adl_pci7296_detach,
+};
+
+static int __devinit adl_pci7296_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ return comedi_pci_auto_config(dev, &adl_pci7296_driver);
+}
+
+static void __devexit adl_pci7296_pci_remove(struct pci_dev *dev)
+{
+ comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7224) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7248) },
+ { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
+
+static struct pci_driver adl_pci7296_pci_driver = {
+ .name = "adl_pci7296",
+ .id_table = adl_pci7296_pci_table,
+ .probe = adl_pci7296_pci_probe,
+ .remove = __devexit_p(adl_pci7296_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7296_driver, adl_pci7296_pci_driver);
+
+MODULE_DESCRIPTION("ADLINK PCI-72xx Opto-22 Compatible Digital I/O Boards");
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_LICENSE("GPL");
obj-$(CONFIG_COMEDI_POC) += poc.o
# Comedi PCI drivers
+obj-$(CONFIG_COMEDI_8255_PCI) += 8255_pci.o
obj-$(CONFIG_COMEDI_ADDI_APCI_035) += addi_apci_035.o
obj-$(CONFIG_COMEDI_ADDI_APCI_1032) += addi_apci_1032.o
obj-$(CONFIG_COMEDI_ADDI_APCI_1500) += addi_apci_1500.o
obj-$(CONFIG_COMEDI_ADDI_APCI_3XXX) += addi_apci_3xxx.o
obj-$(CONFIG_COMEDI_ADL_PCI6208) += adl_pci6208.o
obj-$(CONFIG_COMEDI_ADL_PCI7X3X) += adl_pci7x3x.o
-obj-$(CONFIG_COMEDI_ADL_PCI7296) += adl_pci7296.o
obj-$(CONFIG_COMEDI_ADL_PCI8164) += adl_pci8164.o
obj-$(CONFIG_COMEDI_ADL_PCI9111) += adl_pci9111.o
obj-$(CONFIG_COMEDI_ADL_PCI9118) += adl_pci9118.o
+++ /dev/null
-/*
- * COMEDI driver for the ADLINK PCI-72xx series boards.
- *
- * COMEDI - Linux Control and Measurement Device Interface
- * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
-Driver: adl_pci7296
-Description: 24/48/96-Channel Opto-22 Compatible Digital I/O Boards
-Devices: (ADLink) PCI-7224 [adl_pci7224] - 24 channels
- (ADLink) PCI-7248 [adl_pci7248] - 48 channels
- (ADLink) PCI-7296 [adl_pci7296] - 96 channels
-Author: Jon Grierson <jd@renko.co.uk>
-Updated: Mon, 14 Apr 2008 15:05:56 +0100
-Status: testing
-
-This driver only attaches using the PCI PnP auto config support
-in the comedi core. The module parameter 'comedi_autoconfig'
-must be 1 (default) to enable this feature. The COMEDI_DEVCONFIG
-ioctl, used by the comedi_config utility, is not supported by
-this driver.
-
-These boards also have an 8254 programmable timer/counter chip.
-This chip is not currently supported by this driver.
-
-Interrupt support for these boards is also not currently supported.
-
-Configuration Options: not applicable
-*/
-
-#include "../comedidev.h"
-
-#include "8255.h"
-
-/*
- * PCI Device ID's supported by this driver
- */
-#define PCI_DEVICE_ID_PCI7224 0x7224
-#define PCI_DEVICE_ID_PCI7248 0x7248
-#define PCI_DEVICE_ID_PCI7296 0x7296
-
-struct adl_pci7296_boardinfo {
- const char *name;
- unsigned short device;
- int nsubdevs;
-};
-
-static const struct adl_pci7296_boardinfo adl_pci7296_boards[] = {
- {
- .name = "adl_pci7224",
- .device = PCI_DEVICE_ID_PCI7224,
- .nsubdevs = 1,
- }, {
- .name = "adl_pci7248",
- .device = PCI_DEVICE_ID_PCI7248,
- .nsubdevs = 2,
- }, {
- .name = "adl_pci7296",
- .device = PCI_DEVICE_ID_PCI7296,
- .nsubdevs = 4,
- },
-};
-
-static const void *adl_pci7296_find_boardinfo(struct comedi_device *dev,
- struct pci_dev *pcidev)
-{
- const struct adl_pci7296_boardinfo *board;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(adl_pci7296_boards); i++) {
- board = &adl_pci7296_boards[i];
- if (pcidev->device == board->device)
- return board;
- }
- return NULL;
-}
-
-static int adl_pci7296_attach_pci(struct comedi_device *dev,
- struct pci_dev *pcidev)
-{
- const struct adl_pci7296_boardinfo *board;
- struct comedi_subdevice *s;
- int ret;
- int i;
-
- comedi_set_hw_dev(dev, &pcidev->dev);
-
- board = adl_pci7296_find_boardinfo(dev, pcidev);
- if (!board)
- return -ENODEV;
- dev->board_ptr = board;
- dev->board_name = board->name;
-
- ret = comedi_pci_enable(pcidev, dev->board_name);
- if (ret)
- return ret;
- dev->iobase = pci_resource_start(pcidev, 2);
-
- /*
- * One, two, or four subdevices are setup by this driver depending
- * on the number of channels provided by the board. Each subdevice
- * has 24 channels supported by the 8255 module.
- */
- ret = comedi_alloc_subdevices(dev, board->nsubdevs);
- if (ret)
- return ret;
-
- for (i = 0; i < board->nsubdevs; i++) {
- s = &dev->subdevices[i];
- ret = subdev_8255_init(dev, s, NULL, dev->iobase + (i * 4));
- if (ret)
- return ret;
- }
-
- dev_info(dev->class_dev, "%s attached (%d digital i/o channels)\n",
- dev->board_name, board->nsubdevs * 24);
-
- return 0;
-}
-
-static void adl_pci7296_detach(struct comedi_device *dev)
-{
- struct pci_dev *pcidev = comedi_to_pci_dev(dev);
- const struct adl_pci7296_boardinfo *board = comedi_board(dev);
- struct comedi_subdevice *s;
- int i;
-
- if (dev->subdevices) {
- for (i = 0; i < board->nsubdevs; i++) {
- s = &dev->subdevices[i];
- subdev_8255_cleanup(dev, s);
- }
- }
- if (pcidev) {
- if (dev->iobase)
- comedi_pci_disable(pcidev);
- }
-}
-
-static struct comedi_driver adl_pci7296_driver = {
- .driver_name = "adl_pci7296",
- .module = THIS_MODULE,
- .attach_pci = adl_pci7296_attach_pci,
- .detach = adl_pci7296_detach,
-};
-
-static int __devinit adl_pci7296_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *ent)
-{
- return comedi_pci_auto_config(dev, &adl_pci7296_driver);
-}
-
-static void __devexit adl_pci7296_pci_remove(struct pci_dev *dev)
-{
- comedi_pci_auto_unconfig(dev);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
- { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7224) },
- { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7248) },
- { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
-
-static struct pci_driver adl_pci7296_pci_driver = {
- .name = "adl_pci7296",
- .id_table = adl_pci7296_pci_table,
- .probe = adl_pci7296_pci_probe,
- .remove = __devexit_p(adl_pci7296_pci_remove),
-};
-module_comedi_pci_driver(adl_pci7296_driver, adl_pci7296_pci_driver);
-
-MODULE_DESCRIPTION("ADLINK PCI-72xx Opto-22 Compatible Digital I/O Boards");
-MODULE_AUTHOR("Comedi http://www.comedi.org");
-MODULE_LICENSE("GPL");
projects / ~emulex / infiniband.git / commitdiff