/* Mesh Control 802.11s */
#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100
+/* Mesh Power Save Level */
+#define IEEE80211_QOS_CTL_MESH_PS_LEVEL 0x0200
+/* Mesh Receiver Service Period Initiated */
+#define IEEE80211_QOS_CTL_RSPI 0x0400
+
/* U-APSD queue for WMM IEs sent by AP */
#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7)
#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f
* @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
* @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
* is ongoing
+ * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has
+ * neighbors in deep sleep mode
*/
enum mesh_config_capab_flags {
IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01,
IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08,
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20,
+ IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40,
};
/**
Do not select this option.
+config MAC80211_MESH_PS_DEBUG
+ bool "Verbose mesh powersave debugging"
+ depends on MAC80211_DEBUG_MENU
+ depends on MAC80211_MESH
+ ---help---
+ Selecting this option causes mac80211 to print out very verbose mesh
+ powersave debugging messages (when mac80211 is taking part in a
+ mesh network).
+
+ Do not select this option.
+
config MAC80211_TDLS_DEBUG
bool "Verbose TDLS debugging"
depends on MAC80211_DEBUG_MENU
mesh_pathtbl.o \
mesh_plink.o \
mesh_hwmp.o \
- mesh_sync.o
+ mesh_sync.o \
+ mesh_ps.o
mac80211-$(CONFIG_PM) += pm.o
#ifdef CONFIG_MAC80211_MESH
sinfo->filled |= STATION_INFO_LLID |
STATION_INFO_PLID |
- STATION_INFO_PLINK_STATE;
+ STATION_INFO_PLINK_STATE |
+ STATION_INFO_LOCAL_PM |
+ STATION_INFO_PEER_PM |
+ STATION_INFO_NONPEER_PM;
sinfo->llid = le16_to_cpu(sta->llid);
sinfo->plid = le16_to_cpu(sta->plid);
sinfo->filled |= STATION_INFO_T_OFFSET;
sinfo->t_offset = sta->t_offset;
}
+ sinfo->local_pm = sta->local_pm;
+ sinfo->peer_pm = sta->peer_pm;
+ sinfo->nonpeer_pm = sta->nonpeer_pm;
#endif
}
changed = mesh_plink_inc_estab_count(
sdata);
sta->plink_state = params->plink_state;
+
+ ieee80211_mps_sta_status_update(sta);
+ ieee80211_mps_set_sta_local_pm(sta,
+ sdata->u.mesh.mshcfg.power_mode);
break;
case NL80211_PLINK_LISTEN:
case NL80211_PLINK_BLOCKED:
changed = mesh_plink_dec_estab_count(
sdata);
sta->plink_state = params->plink_state;
+
+ ieee80211_mps_sta_status_update(sta);
+ ieee80211_mps_local_status_update(sdata);
break;
default:
/* nothing */
break;
}
}
+
+ if (params->local_pm)
+ ieee80211_mps_set_sta_local_pm(sta, params->local_pm);
#endif
}
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask))
conf->dot11MeshHWMPconfirmationInterval =
nconf->dot11MeshHWMPconfirmationInterval;
+ if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) {
+ conf->power_mode = nconf->power_mode;
+ ieee80211_mps_local_status_update(sdata);
+ }
+ if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) {
+ conf->dot11MeshAwakeWindowDuration =
+ nconf->dot11MeshAwakeWindowDuration;
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+ }
return 0;
}
#define MAC80211_MESH_SYNC_DEBUG 0
#endif
+#ifdef CONFIG_MAC80211_MESH_PS_DEBUG
+#define MAC80211_MESH_PS_DEBUG 1
+#else
+#define MAC80211_MESH_PS_DEBUG 0
+#endif
+
#ifdef CONFIG_MAC80211_TDLS_DEBUG
#define MAC80211_TDLS_DEBUG 1
#else
_sdata_dbg(MAC80211_MESH_SYNC_DEBUG, \
sdata, fmt, ##__VA_ARGS__)
+#define mps_dbg(sdata, fmt, ...) \
+ _sdata_dbg(MAC80211_MESH_PS_DEBUG, \
+ sdata, fmt, ##__VA_ARGS__)
+
#define tdls_dbg(sdata, fmt, ...) \
_sdata_dbg(MAC80211_TDLS_DEBUG, \
sdata, fmt, ##__VA_ARGS__)
u.mesh.mshcfg.dot11MeshHWMProotInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPconfirmationInterval,
u.mesh.mshcfg.dot11MeshHWMPconfirmationInterval, DEC);
+IEEE80211_IF_FILE(power_mode, u.mesh.mshcfg.power_mode, DEC);
+IEEE80211_IF_FILE(dot11MeshAwakeWindowDuration,
+ u.mesh.mshcfg.dot11MeshAwakeWindowDuration, DEC);
#endif
#define DEBUGFS_ADD_MODE(name, mode) \
MESHPARAMS_ADD(dot11MeshHWMPactivePathToRootTimeout);
MESHPARAMS_ADD(dot11MeshHWMProotInterval);
MESHPARAMS_ADD(dot11MeshHWMPconfirmationInterval);
+ MESHPARAMS_ADD(power_mode);
+ MESHPARAMS_ADD(dot11MeshAwakeWindowDuration);
#undef MESHPARAMS_ADD
}
#endif
test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
int res = scnprintf(buf, sizeof(buf),
- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
TEST(PS_DRIVER), TEST(AUTHORIZED),
TEST(SHORT_PREAMBLE),
TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT),
TEST(INSERTED), TEST(RATE_CONTROL),
- TEST(TOFFSET_KNOWN));
+ TEST(TOFFSET_KNOWN), TEST(MPSP_OWNER),
+ TEST(MPSP_RECIPIENT));
#undef TEST
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
s64 sync_offset_clockdrift_max;
spinlock_t sync_offset_lock;
bool adjusting_tbtt;
+ /* mesh power save */
+ enum nl80211_mesh_power_mode nonpeer_pm;
+ int ps_peers_light_sleep;
+ int ps_peers_deep_sleep;
+ struct ps_data ps;
};
#ifdef CONFIG_MAC80211_MESH
struct ieee80211_meshconf_ie *mesh_config;
u8 *mesh_id;
u8 *peering;
+ __le16 *awake_window;
u8 *preq;
u8 *prep;
u8 *perr;
*pos = IEEE80211_MESHCONF_CAPAB_FORWARDING;
*pos |= ifmsh->accepting_plinks ?
IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
+ /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
+ *pos |= ifmsh->ps_peers_deep_sleep ?
+ IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
*pos++ |= ifmsh->adjusting_tbtt ?
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
*pos++ = 0x00;
return 0;
}
+int mesh_add_awake_window_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ u8 *pos;
+
+ /* see IEEE802.11-2012 13.14.6 */
+ if (ifmsh->ps_peers_light_sleep == 0 &&
+ ifmsh->ps_peers_deep_sleep == 0 &&
+ ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
+ return 0;
+
+ if (skb_tailroom(skb) < 4)
+ return -ENOMEM;
+
+ pos = skb_put(skb, 2 + 2);
+ *pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
+ *pos++ = 2;
+ put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
+
+ return 0;
+}
+
int
mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
{
sdata->vif.bss_conf.basic_rates =
ieee80211_mandatory_rates(local, band);
+ ieee80211_mps_local_status_update(sdata);
+
ieee80211_bss_info_change_notify(sdata, changed);
netif_carrier_on(sdata->dev);
sta_info_flush(sdata);
mesh_path_flush_by_iface(sdata);
+ /* free all potentially still buffered group-addressed frames */
+ local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
+ skb_queue_purge(&ifmsh->ps.bc_buf);
+
del_timer_sync(&sdata->u.mesh.housekeeping_timer);
del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
del_timer_sync(&sdata->u.mesh.mesh_path_timer);
ieee80211_mesh_path_root_timer,
(unsigned long) sdata);
INIT_LIST_HEAD(&ifmsh->preq_queue.list);
+ skb_queue_head_init(&ifmsh->ps.bc_buf);
spin_lock_init(&ifmsh->mesh_preq_queue_lock);
spin_lock_init(&ifmsh->sync_offset_lock);
struct ieee80211_sub_if_data *sdata);
int mesh_add_rsn_ie(struct sk_buff *skb,
struct ieee80211_sub_if_data *sdata);
+int mesh_add_awake_window_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
int mesh_add_vendor_ies(struct sk_buff *skb,
struct ieee80211_sub_if_data *sdata);
int mesh_add_ds_params_ie(struct sk_buff *skb,
void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh);
const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method);
+/* mesh power save */
+void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata);
+void ieee80211_mps_set_sta_local_pm(struct sta_info *sta,
+ enum nl80211_mesh_power_mode pm);
+void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ struct ieee80211_hdr *hdr);
+void ieee80211_mps_sta_status_update(struct sta_info *sta);
+void ieee80211_mps_rx_h_sta_process(struct sta_info *sta,
+ struct ieee80211_hdr *hdr);
+void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta,
+ bool tx, bool acked);
+void ieee80211_mps_frame_release(struct sta_info *sta,
+ struct ieee802_11_elems *elems);
+
/* Mesh paths */
int mesh_nexthop_lookup(struct sk_buff *skb,
struct ieee80211_sub_if_data *sdata);
struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
skb_set_mac_header(skb, 0);
skb_set_network_header(skb, 0);
info->control.vif = &sdata->vif;
info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
ieee80211_set_qos_hdr(sdata, skb);
+ ieee80211_mps_set_frame_flags(sdata, NULL, hdr);
}
/**
u8 *target_addr = hdr->addr3;
int err = 0;
+ /* Nulls are only sent to peers for PS and should be pre-addressed */
+ if (ieee80211_is_qos_nullfunc(hdr->frame_control))
+ return 0;
+
rcu_read_lock();
err = mesh_nexthop_lookup(skb, sdata);
if (!err)
if (next_hop) {
memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN);
memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN);
+ ieee80211_mps_set_frame_flags(sdata, next_hop, hdr);
err = 0;
}
hdr = (struct ieee80211_hdr *) skb->data;
memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN);
memcpy(hdr->addr2, mpath->sdata->vif.addr, ETH_ALEN);
+ ieee80211_mps_set_frame_flags(sta->sdata, sta, hdr);
}
spin_unlock_irqrestore(&mpath->frame_queue.lock, flags);
sta->plink_state = NL80211_PLINK_BLOCKED;
mesh_path_flush_by_nexthop(sta);
+ ieee80211_mps_sta_status_update(sta);
+ ieee80211_mps_local_status_update(sdata);
+
return changed;
}
rssi_threshold_check(sta, sdata))
mesh_plink_open(sta);
+ ieee80211_mps_frame_release(sta, elems);
out:
rcu_read_unlock();
}
"Mesh plink: starting establishment with %pM\n",
sta->sta.addr);
+ /* set the non-peer mode to active during peering */
+ ieee80211_mps_local_status_update(sdata);
+
return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
sta->sta.addr, llid, 0, 0);
}
sta->llid = llid;
mesh_plink_timer_set(sta,
mshcfg->dot11MeshRetryTimeout);
+
+ /* set the non-peer mode to active during peering */
+ ieee80211_mps_local_status_update(sdata);
+
spin_unlock_bh(&sta->lock);
mesh_plink_frame_tx(sdata,
WLAN_SP_MESH_PEERING_OPEN,
changed |= mesh_set_short_slot_time(sdata);
mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
sta->sta.addr);
+ ieee80211_mps_sta_status_update(sta);
+ ieee80211_mps_set_sta_local_pm(sta,
+ mshcfg->power_mode);
break;
default:
spin_unlock_bh(&sta->lock);
mesh_plink_frame_tx(sdata,
WLAN_SP_MESH_PEERING_CONFIRM,
sta->sta.addr, llid, plid, 0);
+ ieee80211_mps_sta_status_update(sta);
+ ieee80211_mps_set_sta_local_pm(sta,
+ mshcfg->power_mode);
break;
default:
spin_unlock_bh(&sta->lock);
--- /dev/null
+/*
+ * Copyright 2012-2013, Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
+ * Copyright 2012-2013, cozybit Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "mesh.h"
+#include "wme.h"
+
+
+/* mesh PS management */
+
+/**
+ * mps_qos_null_get - create pre-addressed QoS Null frame for mesh powersave
+ */
+static struct sk_buff *mps_qos_null_get(struct sta_info *sta)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_hdr *nullfunc; /* use 4addr header */
+ struct sk_buff *skb;
+ int size = sizeof(*nullfunc);
+ __le16 fc;
+
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + size + 2);
+ if (!skb)
+ return NULL;
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+
+ nullfunc = (struct ieee80211_hdr *) skb_put(skb, size);
+ fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+ ieee80211_fill_mesh_addresses(nullfunc, &fc, sta->sta.addr,
+ sdata->vif.addr);
+ nullfunc->frame_control = fc;
+ nullfunc->duration_id = 0;
+ /* no address resolution for this frame -> set addr 1 immediately */
+ memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
+ memset(skb_put(skb, 2), 0, 2); /* append QoS control field */
+ ieee80211_mps_set_frame_flags(sdata, sta, nullfunc);
+
+ return skb;
+}
+
+/**
+ * mps_qos_null_tx - send a QoS Null to indicate link-specific power mode
+ */
+static void mps_qos_null_tx(struct sta_info *sta)
+{
+ struct sk_buff *skb;
+
+ skb = mps_qos_null_get(sta);
+ if (!skb)
+ return;
+
+ mps_dbg(sta->sdata, "announcing peer-specific power mode to %pM\n",
+ sta->sta.addr);
+
+ /* don't unintentionally start a MPSP */
+ if (!test_sta_flag(sta, WLAN_STA_PS_STA)) {
+ u8 *qc = ieee80211_get_qos_ctl((void *) skb->data);
+
+ qc[0] |= IEEE80211_QOS_CTL_EOSP;
+ }
+
+ ieee80211_tx_skb(sta->sdata, skb);
+}
+
+/**
+ * ieee80211_mps_local_status_update - track status of local link-specific PMs
+ *
+ * @sdata: local mesh subif
+ *
+ * sets the non-peer power mode and triggers the driver PS (re-)configuration
+ */
+void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ struct sta_info *sta;
+ bool peering = false;
+ int light_sleep_cnt = 0;
+ int deep_sleep_cnt = 0;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
+ if (sdata != sta->sdata)
+ continue;
+
+ switch (sta->plink_state) {
+ case NL80211_PLINK_OPN_SNT:
+ case NL80211_PLINK_OPN_RCVD:
+ case NL80211_PLINK_CNF_RCVD:
+ peering = true;
+ break;
+ case NL80211_PLINK_ESTAB:
+ if (sta->local_pm == NL80211_MESH_POWER_LIGHT_SLEEP)
+ light_sleep_cnt++;
+ else if (sta->local_pm == NL80211_MESH_POWER_DEEP_SLEEP)
+ deep_sleep_cnt++;
+ break;
+ default:
+ break;
+ }
+ }
+ rcu_read_unlock();
+
+ /*
+ * Set non-peer mode to active during peering/scanning/authentication
+ * (see IEEE802.11-2012 13.14.8.3). The non-peer mesh power mode is
+ * deep sleep if the local STA is in light or deep sleep towards at
+ * least one mesh peer (see 13.14.3.1). Otherwise, set it to the
+ * user-configured default value.
+ */
+ if (peering) {
+ mps_dbg(sdata, "setting non-peer PM to active for peering\n");
+ ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE;
+ } else if (light_sleep_cnt || deep_sleep_cnt) {
+ mps_dbg(sdata, "setting non-peer PM to deep sleep\n");
+ ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP;
+ } else {
+ mps_dbg(sdata, "setting non-peer PM to user value\n");
+ ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode;
+ }
+
+ ifmsh->ps_peers_light_sleep = light_sleep_cnt;
+ ifmsh->ps_peers_deep_sleep = deep_sleep_cnt;
+}
+
+/**
+ * ieee80211_mps_set_sta_local_pm - set local PM towards a mesh STA
+ *
+ * @sta: mesh STA
+ * @pm: the power mode to set
+ */
+void ieee80211_mps_set_sta_local_pm(struct sta_info *sta,
+ enum nl80211_mesh_power_mode pm)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+
+ mps_dbg(sdata, "local STA operates in mode %d with %pM\n",
+ pm, sta->sta.addr);
+
+ sta->local_pm = pm;
+
+ /*
+ * announce peer-specific power mode transition
+ * (see IEEE802.11-2012 13.14.3.2 and 13.14.3.3)
+ */
+ if (sta->plink_state == NL80211_PLINK_ESTAB)
+ mps_qos_null_tx(sta);
+
+ ieee80211_mps_local_status_update(sdata);
+}
+
+/**
+ * ieee80211_mps_set_frame_flags - set mesh PS flags in FC (and QoS Control)
+ *
+ * @sdata: local mesh subif
+ * @sta: mesh STA
+ * @hdr: 802.11 frame header
+ *
+ * see IEEE802.11-2012 8.2.4.1.7 and 8.2.4.5.11
+ *
+ * NOTE: sta must be given when an individually-addressed QoS frame header
+ * is handled, for group-addressed and management frames it is not used
+ */
+void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta,
+ struct ieee80211_hdr *hdr)
+{
+ enum nl80211_mesh_power_mode pm;
+ u8 *qc;
+
+ if (WARN_ON(is_unicast_ether_addr(hdr->addr1) &&
+ ieee80211_is_data_qos(hdr->frame_control) &&
+ !sta))
+ return;
+
+ if (is_unicast_ether_addr(hdr->addr1) &&
+ ieee80211_is_data_qos(hdr->frame_control) &&
+ sta->plink_state == NL80211_PLINK_ESTAB)
+ pm = sta->local_pm;
+ else
+ pm = sdata->u.mesh.nonpeer_pm;
+
+ if (pm == NL80211_MESH_POWER_ACTIVE)
+ hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_PM);
+ else
+ hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+
+ if (!ieee80211_is_data_qos(hdr->frame_control))
+ return;
+
+ qc = ieee80211_get_qos_ctl(hdr);
+
+ if ((is_unicast_ether_addr(hdr->addr1) &&
+ pm == NL80211_MESH_POWER_DEEP_SLEEP) ||
+ (is_multicast_ether_addr(hdr->addr1) &&
+ sdata->u.mesh.ps_peers_deep_sleep > 0))
+ qc[1] |= (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8);
+ else
+ qc[1] &= ~(IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8);
+}
+
+/**
+ * ieee80211_mps_sta_status_update - update buffering status of neighbor STA
+ *
+ * @sta: mesh STA
+ *
+ * called after change of peering status or non-peer/peer-specific power mode
+ */
+void ieee80211_mps_sta_status_update(struct sta_info *sta)
+{
+ enum nl80211_mesh_power_mode pm;
+ bool do_buffer;
+
+ /*
+ * use peer-specific power mode if peering is established and the
+ * peer's power mode is known
+ */
+ if (sta->plink_state == NL80211_PLINK_ESTAB &&
+ sta->peer_pm != NL80211_MESH_POWER_UNKNOWN)
+ pm = sta->peer_pm;
+ else
+ pm = sta->nonpeer_pm;
+
+ do_buffer = (pm != NL80211_MESH_POWER_ACTIVE);
+
+ /* Don't let the same PS state be set twice */
+ if (test_sta_flag(sta, WLAN_STA_PS_STA) == do_buffer)
+ return;
+
+ if (do_buffer) {
+ set_sta_flag(sta, WLAN_STA_PS_STA);
+ atomic_inc(&sta->sdata->u.mesh.ps.num_sta_ps);
+ mps_dbg(sta->sdata, "start PS buffering frames towards %pM\n",
+ sta->sta.addr);
+ } else {
+ ieee80211_sta_ps_deliver_wakeup(sta);
+ }
+
+ /* clear the MPSP flags for non-peers or active STA */
+ if (sta->plink_state != NL80211_PLINK_ESTAB) {
+ clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+ clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+ } else if (!do_buffer) {
+ clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+ }
+}
+
+static void mps_set_sta_peer_pm(struct sta_info *sta,
+ struct ieee80211_hdr *hdr)
+{
+ enum nl80211_mesh_power_mode pm;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+
+ /*
+ * Test Power Management field of frame control (PW) and
+ * mesh power save level subfield of QoS control field (PSL)
+ *
+ * | PM | PSL| Mesh PM |
+ * +----+----+---------+
+ * | 0 |Rsrv| Active |
+ * | 1 | 0 | Light |
+ * | 1 | 1 | Deep |
+ */
+ if (ieee80211_has_pm(hdr->frame_control)) {
+ if (qc[1] & (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8))
+ pm = NL80211_MESH_POWER_DEEP_SLEEP;
+ else
+ pm = NL80211_MESH_POWER_LIGHT_SLEEP;
+ } else {
+ pm = NL80211_MESH_POWER_ACTIVE;
+ }
+
+ if (sta->peer_pm == pm)
+ return;
+
+ mps_dbg(sta->sdata, "STA %pM enters mode %d\n",
+ sta->sta.addr, pm);
+
+ sta->peer_pm = pm;
+
+ ieee80211_mps_sta_status_update(sta);
+}
+
+static void mps_set_sta_nonpeer_pm(struct sta_info *sta,
+ struct ieee80211_hdr *hdr)
+{
+ enum nl80211_mesh_power_mode pm;
+
+ if (ieee80211_has_pm(hdr->frame_control))
+ pm = NL80211_MESH_POWER_DEEP_SLEEP;
+ else
+ pm = NL80211_MESH_POWER_ACTIVE;
+
+ if (sta->nonpeer_pm == pm)
+ return;
+
+ mps_dbg(sta->sdata, "STA %pM sets non-peer mode to %d\n",
+ sta->sta.addr, pm);
+
+ sta->nonpeer_pm = pm;
+
+ ieee80211_mps_sta_status_update(sta);
+}
+
+/**
+ * ieee80211_mps_rx_h_sta_process - frame receive handler for mesh powersave
+ *
+ * @sta: STA info that transmitted the frame
+ * @hdr: IEEE 802.11 (QoS) Header
+ */
+void ieee80211_mps_rx_h_sta_process(struct sta_info *sta,
+ struct ieee80211_hdr *hdr)
+{
+ if (is_unicast_ether_addr(hdr->addr1) &&
+ ieee80211_is_data_qos(hdr->frame_control)) {
+ /*
+ * individually addressed QoS Data/Null frames contain
+ * peer link-specific PS mode towards the local STA
+ */
+ mps_set_sta_peer_pm(sta, hdr);
+
+ /* check for mesh Peer Service Period trigger frames */
+ ieee80211_mpsp_trigger_process(ieee80211_get_qos_ctl(hdr),
+ sta, false, false);
+ } else {
+ /*
+ * can only determine non-peer PS mode
+ * (see IEEE802.11-2012 8.2.4.1.7)
+ */
+ mps_set_sta_nonpeer_pm(sta, hdr);
+ }
+}
+
+
+/* mesh PS frame release */
+
+static void mpsp_trigger_send(struct sta_info *sta, bool rspi, bool eosp)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct sk_buff *skb;
+ struct ieee80211_hdr *nullfunc;
+ struct ieee80211_tx_info *info;
+ u8 *qc;
+
+ skb = mps_qos_null_get(sta);
+ if (!skb)
+ return;
+
+ nullfunc = (struct ieee80211_hdr *) skb->data;
+ if (!eosp)
+ nullfunc->frame_control |=
+ cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ /*
+ * | RSPI | EOSP | MPSP triggering |
+ * +------+------+--------------------+
+ * | 0 | 0 | local STA is owner |
+ * | 0 | 1 | no MPSP (MPSP end) |
+ * | 1 | 0 | both STA are owner |
+ * | 1 | 1 | peer STA is owner | see IEEE802.11-2012 13.14.9.2
+ */
+ qc = ieee80211_get_qos_ctl(nullfunc);
+ if (rspi)
+ qc[1] |= (IEEE80211_QOS_CTL_RSPI >> 8);
+ if (eosp)
+ qc[0] |= IEEE80211_QOS_CTL_EOSP;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
+ IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+ mps_dbg(sdata, "sending MPSP trigger%s%s to %pM\n",
+ rspi ? " RSPI" : "", eosp ? " EOSP" : "", sta->sta.addr);
+
+ ieee80211_tx_skb(sdata, skb);
+}
+
+/**
+ * mpsp_qos_null_append - append QoS Null frame to MPSP skb queue if needed
+ *
+ * To properly end a mesh MPSP the last transmitted frame has to set the EOSP
+ * flag in the QoS Control field. In case the current tailing frame is not a
+ * QoS Data frame, append a QoS Null to carry the flag.
+ */
+static void mpsp_qos_null_append(struct sta_info *sta,
+ struct sk_buff_head *frames)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct sk_buff *new_skb, *skb = skb_peek_tail(frames);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_tx_info *info;
+
+ if (ieee80211_is_data_qos(hdr->frame_control))
+ return;
+
+ new_skb = mps_qos_null_get(sta);
+ if (!new_skb)
+ return;
+
+ mps_dbg(sdata, "appending QoS Null in MPSP towards %pM\n",
+ sta->sta.addr);
+ /*
+ * This frame has to be transmitted last. Assign lowest priority to
+ * make sure it cannot pass other frames when releasing multiple ACs.
+ */
+ new_skb->priority = 1;
+ skb_set_queue_mapping(new_skb, IEEE80211_AC_BK);
+ ieee80211_set_qos_hdr(sdata, new_skb);
+
+ info = IEEE80211_SKB_CB(new_skb);
+ info->control.vif = &sdata->vif;
+ info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
+
+ __skb_queue_tail(frames, new_skb);
+}
+
+/**
+ * mps_frame_deliver - transmit frames during mesh powersave
+ *
+ * @sta: STA info to transmit to
+ * @n_frames: number of frames to transmit. -1 for all
+ */
+static void mps_frame_deliver(struct sta_info *sta, int n_frames)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct ieee80211_local *local = sdata->local;
+ int ac;
+ struct sk_buff_head frames;
+ struct sk_buff *skb;
+ bool more_data = false;
+
+ skb_queue_head_init(&frames);
+
+ /* collect frame(s) from buffers */
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ while (n_frames != 0) {
+ skb = skb_dequeue(&sta->tx_filtered[ac]);
+ if (!skb) {
+ skb = skb_dequeue(
+ &sta->ps_tx_buf[ac]);
+ if (skb)
+ local->total_ps_buffered--;
+ }
+ if (!skb)
+ break;
+ n_frames--;
+ __skb_queue_tail(&frames, skb);
+ }
+
+ if (!skb_queue_empty(&sta->tx_filtered[ac]) ||
+ !skb_queue_empty(&sta->ps_tx_buf[ac]))
+ more_data = true;
+ }
+
+ /* nothing to send? -> EOSP */
+ if (skb_queue_empty(&frames)) {
+ mpsp_trigger_send(sta, false, true);
+ return;
+ }
+
+ /* in a MPSP make sure the last skb is a QoS Data frame */
+ if (test_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+ mpsp_qos_null_append(sta, &frames);
+
+ mps_dbg(sta->sdata, "sending %d frames to PS STA %pM\n",
+ skb_queue_len(&frames), sta->sta.addr);
+
+ /* prepare collected frames for transmission */
+ skb_queue_walk(&frames, skb) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (void *) skb->data;
+
+ /*
+ * Tell TX path to send this frame even though the
+ * STA may still remain is PS mode after this frame
+ * exchange.
+ */
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+
+ if (more_data || !skb_queue_is_last(&frames, skb))
+ hdr->frame_control |=
+ cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ else
+ hdr->frame_control &=
+ cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
+
+ if (skb_queue_is_last(&frames, skb) &&
+ ieee80211_is_data_qos(hdr->frame_control)) {
+ u8 *qoshdr = ieee80211_get_qos_ctl(hdr);
+
+ /* MPSP trigger frame ends service period */
+ *qoshdr |= IEEE80211_QOS_CTL_EOSP;
+ info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ }
+ }
+
+ ieee80211_add_pending_skbs(local, &frames);
+ sta_info_recalc_tim(sta);
+}
+
+/**
+ * ieee80211_mpsp_trigger_process - track status of mesh Peer Service Periods
+ *
+ * @qc: QoS Control field
+ * @sta: peer to start a MPSP with
+ * @tx: frame was transmitted by the local STA
+ * @acked: frame has been transmitted successfully
+ *
+ * NOTE: active mode STA may only serve as MPSP owner
+ */
+void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta,
+ bool tx, bool acked)
+{
+ u8 rspi = qc[1] & (IEEE80211_QOS_CTL_RSPI >> 8);
+ u8 eosp = qc[0] & IEEE80211_QOS_CTL_EOSP;
+
+ if (tx) {
+ if (rspi && acked)
+ set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+
+ if (eosp)
+ clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+ else if (acked &&
+ test_sta_flag(sta, WLAN_STA_PS_STA) &&
+ !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+ mps_frame_deliver(sta, -1);
+ } else {
+ if (eosp)
+ clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+ else if (sta->local_pm != NL80211_MESH_POWER_ACTIVE)
+ set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+
+ if (rspi && !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+ mps_frame_deliver(sta, -1);
+ }
+}
+
+/**
+ * ieee80211_mps_frame_release - release buffered frames in response to beacon
+ *
+ * @sta: mesh STA
+ * @elems: beacon IEs
+ *
+ * For peers if we have individually-addressed frames buffered or the peer
+ * indicates buffered frames, send a corresponding MPSP trigger frame. Since
+ * we do not evaluate the awake window duration, QoS Nulls are used as MPSP
+ * trigger frames. If the neighbour STA is not a peer, only send single frames.
+ */
+void ieee80211_mps_frame_release(struct sta_info *sta,
+ struct ieee802_11_elems *elems)
+{
+ int ac, buffer_local = 0;
+ bool has_buffered = false;
+
+ /* TIM map only for LLID <= IEEE80211_MAX_AID */
+ if (sta->plink_state == NL80211_PLINK_ESTAB)
+ has_buffered = ieee80211_check_tim(elems->tim, elems->tim_len,
+ le16_to_cpu(sta->llid) % IEEE80211_MAX_AID);
+
+ if (has_buffered)
+ mps_dbg(sta->sdata, "%pM indicates buffered frames\n",
+ sta->sta.addr);
+
+ /* only transmit to PS STA with announced, non-zero awake window */
+ if (test_sta_flag(sta, WLAN_STA_PS_STA) &&
+ (!elems->awake_window || !le16_to_cpu(*elems->awake_window)))
+ return;
+
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+ buffer_local += skb_queue_len(&sta->ps_tx_buf[ac]) +
+ skb_queue_len(&sta->tx_filtered[ac]);
+
+ if (!has_buffered && !buffer_local)
+ return;
+
+ if (sta->plink_state == NL80211_PLINK_ESTAB)
+ mpsp_trigger_send(sta, has_buffered, !buffer_local);
+ else
+ mps_frame_deliver(sta, 1);
+}
}
}
+ /* mesh power save support */
+ if (ieee80211_vif_is_mesh(&rx->sdata->vif))
+ ieee80211_mps_rx_h_sta_process(sta, hdr);
+
/*
* Drop (qos-)data::nullfunc frames silently, since they
* are used only to control station power saving mode.
if (is_multicast_ether_addr(fwd_hdr->addr1)) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_mcast);
memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
+ /* update power mode indication when forwarding */
+ ieee80211_mps_set_frame_flags(sdata, NULL, fwd_hdr);
} else if (!mesh_nexthop_lookup(fwd_skb, sdata)) {
+ /* mesh power mode flags updated in mesh_nexthop_lookup */
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, fwded_unicast);
} else {
/* unable to resolve next hop */
if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
ps = &sdata->bss->ps;
+ else if (ieee80211_vif_is_mesh(&sdata->vif))
+ ps = &sdata->u.mesh.ps;
else
return;
ps = &sta->sdata->bss->ps;
id = sta->sta.aid;
+#ifdef CONFIG_MAC80211_MESH
+ } else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) {
+ ps = &sta->sdata->u.mesh.ps;
+ /* TIM map only for PLID <= IEEE80211_MAX_AID */
+ id = le16_to_cpu(sta->plid) % IEEE80211_MAX_AID;
+#endif
} else {
return;
}
bool have_buffered = false;
int ac;
- /* This is only necessary for stations on BSS interfaces */
- if (!sta->sdata->bss)
+ /* This is only necessary for stations on BSS/MBSS interfaces */
+ if (!sta->sdata->bss &&
+ !ieee80211_vif_is_mesh(&sta->sdata->vif))
return false;
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
if (time_after(jiffies, sta->last_rx + exp_time)) {
sta_dbg(sta->sdata, "expiring inactive STA %pM\n",
sta->sta.addr);
+
+ if (ieee80211_vif_is_mesh(&sdata->vif) &&
+ test_sta_flag(sta, WLAN_STA_PS_STA))
+ atomic_dec(&sdata->u.mesh.ps.num_sta_ps);
+
WARN_ON(__sta_info_destroy(sta));
}
}
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
ps = &sdata->bss->ps;
+ else if (ieee80211_vif_is_mesh(&sdata->vif))
+ ps = &sdata->u.mesh.ps;
else
return;
* @WLAN_STA_INSERTED: This station is inserted into the hash table.
* @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
* @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid.
+ * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period.
+ * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH,
WLAN_STA_INSERTED,
WLAN_STA_RATE_CONTROL,
WLAN_STA_TOFFSET_KNOWN,
+ WLAN_STA_MPSP_OWNER,
+ WLAN_STA_MPSP_RECIPIENT,
};
#define ADDBA_RESP_INTERVAL HZ
* @t_offset_setpoint: reference timing offset of this sta to be used when
* calculating clockdrift
* @ch_width: peer's channel width
+ * @local_pm: local link-specific power save mode
+ * @peer_pm: peer-specific power save mode towards local STA
+ * @nonpeer_pm: STA power save mode towards non-peer neighbors
* @debugfs: debug filesystem info
* @dead: set to true when sta is unlinked
* @uploaded: set to true when sta is uploaded to the driver
s64 t_offset;
s64 t_offset_setpoint;
enum nl80211_chan_width ch_width;
+ /* mesh power save */
+ enum nl80211_mesh_power_mode local_pm;
+ enum nl80211_mesh_power_mode peer_pm;
+ enum nl80211_mesh_power_mode nonpeer_pm;
#endif
#ifdef CONFIG_MAC80211_DEBUGFS
return;
}
+ /* mesh Peer Service Period support */
+ if (ieee80211_vif_is_mesh(&sta->sdata->vif) &&
+ ieee80211_is_data_qos(fc))
+ ieee80211_mpsp_trigger_process(
+ ieee80211_get_qos_ctl(hdr),
+ sta, true, acked);
+
if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) &&
(rates_idx != -1))
sta->last_tx_rate = info->status.rates[rates_idx];
if (sdata->vif.type == NL80211_IFTYPE_AP)
ps = &sdata->u.ap.ps;
+ else if (ieee80211_vif_is_mesh(&sdata->vif))
+ ps = &sdata->u.mesh.ps;
else
continue;
/*
* broadcast/multicast frame
*
- * If any of the associated stations is in power save mode,
+ * If any of the associated/peer stations is in power save mode,
* the frame is buffered to be sent after DTIM beacon frame.
* This is done either by the hardware or us.
*/
- /* powersaving STAs currently only in AP/VLAN mode */
+ /* powersaving STAs currently only in AP/VLAN/mesh mode */
if (tx->sdata->vif.type == NL80211_IFTYPE_AP ||
tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
if (!tx->sdata->bss)
return TX_CONTINUE;
ps = &tx->sdata->bss->ps;
+ } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) {
+ ps = &tx->sdata->u.mesh.ps;
} else {
return TX_CONTINUE;
}
hdr = (struct ieee80211_hdr *) skb->data;
info->control.vif = &sdata->vif;
- if (ieee80211_vif_is_mesh(&sdata->vif) &&
- ieee80211_is_data(hdr->frame_control) &&
- !is_multicast_ether_addr(hdr->addr1) &&
- mesh_nexthop_resolve(skb, sdata)) {
- /* skb queued: don't free */
- return;
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ if (ieee80211_is_data(hdr->frame_control) &&
+ is_unicast_ether_addr(hdr->addr1)) {
+ if (mesh_nexthop_resolve(skb, sdata))
+ return; /* skb queued: don't free */
+ } else {
+ ieee80211_mps_set_frame_flags(sdata, NULL, hdr);
+ }
}
ieee80211_set_qos_hdr(sdata, skb);
2 + /* NULL SSID */
2 + 8 + /* supported rates */
2 + 3 + /* DS params */
+ 256 + /* TIM IE */
2 + (IEEE80211_MAX_SUPP_RATES - 8) +
2 + sizeof(struct ieee80211_ht_cap) +
2 + sizeof(struct ieee80211_ht_operation) +
2 + sdata->u.mesh.mesh_id_len +
2 + sizeof(struct ieee80211_meshconf_ie) +
- sdata->u.mesh.ie_len);
+ sdata->u.mesh.ie_len +
+ 2 + sizeof(__le16)); /* awake window */
if (!skb)
goto out;
eth_broadcast_addr(mgmt->da);
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
+ ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
mgmt->u.beacon.beacon_int =
cpu_to_le16(sdata->vif.bss_conf.beacon_int);
mgmt->u.beacon.capab_info |= cpu_to_le16(
if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
mesh_add_ds_params_ie(skb, sdata) ||
+ ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) ||
ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
mesh_add_rsn_ie(skb, sdata) ||
mesh_add_ht_cap_ie(skb, sdata) ||
mesh_add_ht_oper_ie(skb, sdata) ||
mesh_add_meshid_ie(skb, sdata) ||
mesh_add_meshconf_ie(skb, sdata) ||
+ mesh_add_awake_window_ie(skb, sdata) ||
mesh_add_vendor_ies(skb, sdata)) {
pr_err("o11s: couldn't add ies!\n");
goto out;
goto out;
ps = &sdata->u.ap.ps;
+ } else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ ps = &sdata->u.mesh.ps;
} else {
goto out;
}
elems->peering = pos;
elems->peering_len = elen;
break;
+ case WLAN_EID_MESH_AWAKE_WINDOW:
+ if (elen >= 2)
+ elems->awake_window = (void *)pos;
+ break;
case WLAN_EID_PREQ:
elems->preq = pos;
elems->preq_len = elen;
/* qos header is 2 bytes */
*p++ = ack_policy | tid;
- *p = ieee80211_vif_is_mesh(&sdata->vif) ?
- (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8) : 0;
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ /* preserve RSPI and Mesh PS Level bit */
+ *p &= ((IEEE80211_QOS_CTL_RSPI |
+ IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8);
+
+ /* Nulls don't have a mesh header (frame body) */
+ if (!ieee80211_is_qos_nullfunc(hdr->frame_control))
+ *p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8);
+ } else {
+ *p = 0;
+ }
}
projects / ~emulex / infiniband.git / commitdiff