]> git.openfabrics.org - ~emulex/infiniband.git/commitdiff
staging: emxx_udc: Add Emma Mobile USB Gadget driver
authorMagnus Damm <damm+renesas@opensource.se>
Fri, 6 Jun 2014 10:44:17 +0000 (19:44 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 19 Jun 2014 21:42:17 +0000 (14:42 -0700)
Add the emxx_udc driver to staging based on an old linux-2.6.35.7
android tree. The driver has been brushed up slightly to complile
but it is still in great need of cleanup.

At this point DT bindings are clearly lacking and I doubt that the
driver even can run with multiple instances (global variables, hurray!).

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/Kconfig
drivers/staging/Makefile
drivers/staging/emxx_udc/Kconfig [new file with mode: 0644]
drivers/staging/emxx_udc/Makefile [new file with mode: 0644]
drivers/staging/emxx_udc/emxx_udc.c [new file with mode: 0644]
drivers/staging/emxx_udc/emxx_udc.h [new file with mode: 0644]

index 4f38fc000a371735d40f1b10ed2c03a155c4637e..a511efc1b3c7d93937ee500ea04150e733190c2e 100644 (file)
@@ -90,6 +90,8 @@ source "drivers/staging/tidspbridge/Kconfig"
 
 source "drivers/staging/quickstart/Kconfig"
 
+source "drivers/staging/emxx_udc/Kconfig"
+
 source "drivers/staging/keucr/Kconfig"
 
 source "drivers/staging/bcm/Kconfig"
index 1e97ad2177de4e39bfd29282b72d2f41f612dd1b..e5039056266df049b85917a449860f3ede0739d1 100644 (file)
@@ -39,6 +39,7 @@ obj-$(CONFIG_CXT1E1)          += cxt1e1/
 obj-$(CONFIG_FB_XGI)           += xgifb/
 obj-$(CONFIG_TIDSPBRIDGE)      += tidspbridge/
 obj-$(CONFIG_ACPI_QUICKSTART)  += quickstart/
+obj-$(CONFIG_USB_EMXX)         += emxx_udc/
 obj-$(CONFIG_USB_ENESTORAGE)   += keucr/
 obj-$(CONFIG_BCM_WIMAX)                += bcm/
 obj-$(CONFIG_FT1000)           += ft1000/
diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig
new file mode 100644 (file)
index 0000000..9bc6d3d
--- /dev/null
@@ -0,0 +1,10 @@
+config USB_EMXX
+       boolean "EMXX USB Function Device Controller"
+       depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
+       help
+          The Emma Mobile series of SoCs from Renesas Electronics and
+          former NEC Electronics include USB Function hardware.
+
+          Say "y" to link the driver statically, or "m" to build a
+          dynamically linked module called "emxx_udc" and force all
+          gadget drivers to also be dynamically linked.
diff --git a/drivers/staging/emxx_udc/Makefile b/drivers/staging/emxx_udc/Makefile
new file mode 100644 (file)
index 0000000..6352724
--- /dev/null
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_EMXX) := emxx_udc.o
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
new file mode 100644 (file)
index 0000000..b89c411
--- /dev/null
@@ -0,0 +1,3559 @@
+/*
+ *  drivers/usb/gadget/emxx_udc.c
+ *     EMXX FCD (Function Controller Driver) for USB.
+ *
+ *  Copyright (C) 2010 Renesas Electronics Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software Foundation,
+ *  Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include "emxx_udc.h"
+
+#define        DRIVER_DESC     "EMXX UDC driver"
+#define        DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+static const char      driver_name[] = "emxx_udc";
+static const char      driver_desc[] = DRIVER_DESC;
+
+/*===========================================================================*/
+/* Prototype */
+static void _nbu2ss_ep_dma_abort(struct nbu2ss_udc *, struct nbu2ss_ep *);
+static void _nbu2ss_ep0_enable(struct nbu2ss_udc *);
+/*static void _nbu2ss_ep0_disable(struct nbu2ss_udc *);*/
+static void _nbu2ss_ep_done(struct nbu2ss_ep *, struct nbu2ss_req *, int);
+static void _nbu2ss_set_test_mode(struct nbu2ss_udc *, u32 mode);
+static void _nbu2ss_endpoint_toggle_reset(struct nbu2ss_udc *udc, u8 ep_adrs);
+
+static int _nbu2ss_pullup(struct nbu2ss_udc *, int);
+static void _nbu2ss_fifo_flush(struct nbu2ss_udc *, struct nbu2ss_ep *);
+
+/*===========================================================================*/
+/* Macro */
+#define        _nbu2ss_zero_len_pkt(udc, epnum)        \
+       _nbu2ss_ep_in_end(udc, epnum, 0, 0)
+
+
+/*===========================================================================*/
+/* Global */
+struct nbu2ss_udc udc_controller;
+
+
+/*-------------------------------------------------------------------------*/
+/* Read */
+static inline u32 _nbu2ss_readl(void *address)
+{
+       return __raw_readl(address) ;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Write */
+static inline void _nbu2ss_writel(void *address, u32 udata)
+{
+       __raw_writel(udata, address) ;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Set Bit */
+static inline void _nbu2ss_bitset(void *address, u32 udata)
+{
+       u32     reg_dt = __raw_readl(address) | (udata);
+       __raw_writel(reg_dt, address) ;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Clear Bit */
+static inline void _nbu2ss_bitclr(void *address, u32 udata)
+{
+       u32     reg_dt = __raw_readl(address) & ~(udata);
+       __raw_writel(reg_dt, address) ;
+}
+
+#ifdef UDC_DEBUG_DUMP
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_dump_register(struct nbu2ss_udc *udc)
+{
+       int             i;
+       u32 reg_data;
+
+       pr_info("=== %s()\n", __func__);
+
+       if (udc == NULL) {
+               ERR("%s udc == NULL\n", __func__);
+               return;
+       }
+
+       spin_unlock(&udc->lock);
+
+       printk(KERN_DEBUG "\n-USB REG-\n");
+       for (i = 0x0 ; i < USB_BASE_SIZE ; i += 16) {
+               reg_data =   _nbu2ss_readl(
+                       (u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i));
+               printk(KERN_DEBUG "USB%04x =%08x", i, (int)reg_data);
+
+               reg_data =  _nbu2ss_readl(
+                       (u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 4));
+               printk(KERN_DEBUG " %08x", (int)reg_data);
+
+               reg_data =  _nbu2ss_readl(
+                       (u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 8));
+               printk(KERN_DEBUG " %08x", (int)reg_data);
+
+               reg_data =  _nbu2ss_readl(
+                       (u32 *)IO_ADDRESS(USB_BASE_ADDRESS + i + 12));
+               printk(KERN_DEBUG " %08x\n", (int)reg_data);
+
+       }
+
+       spin_lock(&udc->lock);
+}
+#endif /* UDC_DEBUG_DUMP */
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 Callback (Complete) */
+static void _nbu2ss_ep0_complete(struct usb_ep *_ep, struct usb_request *_req)
+{
+       u8              recipient;
+       u16             selector;
+       u32             test_mode;
+       struct usb_ctrlrequest  *p_ctrl;
+       struct nbu2ss_udc *udc;
+
+       if ((_ep == NULL) || (_req == NULL))
+               return;
+
+       udc = (struct nbu2ss_udc *)_req->context;
+       p_ctrl = &udc->ctrl;
+       if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+
+               if (p_ctrl->bRequest == USB_REQ_SET_FEATURE) {
+                       /*-------------------------------------------------*/
+                       /* SET_FEATURE */
+                       recipient = (u8)(p_ctrl->bRequestType & USB_RECIP_MASK);
+                       selector  = p_ctrl->wValue;
+                       if ((recipient == USB_RECIP_DEVICE) &&
+                               (selector == USB_DEVICE_TEST_MODE)) {
+                               test_mode = (u32)(p_ctrl->wIndex >> 8);
+                               _nbu2ss_set_test_mode(udc, test_mode);
+                       }
+               }
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+/* Initialization usb_request */
+static void _nbu2ss_create_ep0_packet(
+       struct nbu2ss_udc *udc,
+       void *p_buf,
+       unsigned length
+)
+{
+       udc->ep0_req.req.buf            = p_buf;
+       udc->ep0_req.req.length         = length;
+       udc->ep0_req.req.dma            = 0;
+       udc->ep0_req.req.zero           = TRUE;
+       udc->ep0_req.req.complete       = _nbu2ss_ep0_complete;
+       udc->ep0_req.req.status         = -EINPROGRESS;
+       udc->ep0_req.req.context        = udc;
+       udc->ep0_req.req.actual         = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Acquisition of the first address of RAM(FIFO) */
+static u32 _nbu2ss_get_begin_ram_address(struct nbu2ss_udc *udc)
+{
+       u32             num, buf_type;
+       u32             data, last_ram_adr, use_ram_size;
+
+       PT_EP_REGS      p_ep_regs;
+
+       last_ram_adr = (D_RAM_SIZE_CTRL / sizeof(u32)) * 2;
+       use_ram_size = 0;
+
+       for (num = 0; num < NUM_ENDPOINTS - 1; num++) {
+               p_ep_regs = &udc->p_regs->EP_REGS[num];
+               data = _nbu2ss_readl(&p_ep_regs->EP_PCKT_ADRS);
+               buf_type = _nbu2ss_readl(&p_ep_regs->EP_CONTROL) & EPn_BUF_TYPE;
+               if (buf_type == 0) {
+                       /* Single Buffer */
+                       use_ram_size += (data & EPn_MPKT) / sizeof(u32);
+               } else {
+                       /* Double Buffer */
+                       use_ram_size += ((data & EPn_MPKT) / sizeof(u32)) * 2;
+               }
+
+               if ((data >> 16) > last_ram_adr)
+                       last_ram_adr = data>>16;
+       }
+
+       return last_ram_adr + use_ram_size;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Construction of Endpoint */
+static int _nbu2ss_ep_init(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+       u32             num;
+       u32             data;
+       u32             begin_adrs;
+
+       if (ep->epnum == 0)
+               return  -EINVAL;
+
+       num = ep->epnum - 1;
+
+       /*-------------------------------------------------------------*/
+       /* RAM Transfer Address */
+       begin_adrs = _nbu2ss_get_begin_ram_address(udc);
+       data = (begin_adrs << 16) | ep->ep.maxpacket;
+       _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_PCKT_ADRS, data);
+
+       /*-------------------------------------------------------------*/
+       /* Interrupt Enable */
+       data = 1 << (ep->epnum + 8);
+       _nbu2ss_bitset(&udc->p_regs->USB_INT_ENA, data);
+
+       /*-------------------------------------------------------------*/
+       /* Endpoint Type(Mode) */
+       /*   Bulk, Interrupt, ISO */
+       switch (ep->ep_type) {
+       case USB_ENDPOINT_XFER_BULK:
+               data = EPn_BULK;
+               break;
+
+       case USB_ENDPOINT_XFER_INT:
+               data = EPn_BUF_SINGLE | EPn_INTERRUPT;
+               break;
+
+       case USB_ENDPOINT_XFER_ISOC:
+               data = EPn_ISO;
+               break;
+
+       default:
+               data = 0;
+               break;
+       }
+
+       _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+       _nbu2ss_endpoint_toggle_reset(udc, (ep->epnum|ep->direct));
+
+       if (ep->direct == USB_DIR_OUT) {
+               /*---------------------------------------------------------*/
+               /* OUT */
+               data = EPn_EN | EPn_BCLR | EPn_DIR0;
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = (EPn_ONAK | EPn_OSTL_EN | EPn_OSTL);
+               _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = (EPn_OUT_EN | EPn_OUT_END_EN);
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+       } else {
+               /*---------------------------------------------------------*/
+               /* IN */
+               data = (EPn_EN | EPn_BCLR | EPn_AUTO);
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = (EPn_ISTL);
+               _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = (EPn_IN_EN | EPn_IN_END_EN);
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Release of Endpoint */
+static int _nbu2ss_epn_exit(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+       u32             num;
+       u32             data;
+
+       if ((ep->epnum == 0) || (udc->vbus_active == 0))
+               return  -EINVAL;
+
+       num = ep->epnum - 1;
+
+       /*-------------------------------------------------------------*/
+       /* RAM Transfer Address */
+       _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_PCKT_ADRS, 0);
+
+       /*-------------------------------------------------------------*/
+       /* Interrupt Disable */
+       data = 1 << (ep->epnum + 8);
+       _nbu2ss_bitclr(&udc->p_regs->USB_INT_ENA, data);
+
+       if (ep->direct == USB_DIR_OUT) {
+               /*---------------------------------------------------------*/
+               /* OUT */
+               data = EPn_ONAK | EPn_BCLR;
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = EPn_EN | EPn_DIR0;
+               _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = EPn_OUT_EN | EPn_OUT_END_EN;
+               _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+       } else {
+               /*---------------------------------------------------------*/
+               /* IN */
+               data = EPn_BCLR;
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = EPn_EN | EPn_AUTO;
+               _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+
+               data = EPn_IN_EN | EPn_IN_END_EN;
+               _nbu2ss_bitclr(&udc->p_regs->EP_REGS[num].EP_INT_ENA, data);
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* DMA setting (without Endpoint 0) */
+static void _nbu2ss_ep_dma_init(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+       u32             num;
+       u32             data;
+
+       data = _nbu2ss_readl(&udc->p_regs->USBSSCONF);
+       if (((ep->epnum == 0) || (data & (1 << ep->epnum)) == 0))
+               return;         /* Not Support DMA */
+
+       num = ep->epnum - 1;
+
+       if (ep->direct == USB_DIR_OUT) {
+               /*---------------------------------------------------------*/
+               /* OUT */
+               data = ep->ep.maxpacket;
+               _nbu2ss_writel(&udc->p_regs->EP_DCR[num].EP_DCR2, data);
+
+               /*---------------------------------------------------------*/
+               /* Transfer Direct */
+               data = DCR1_EPn_DIR0;
+               _nbu2ss_bitset(&udc->p_regs->EP_DCR[num].EP_DCR1, data);
+
+               /*---------------------------------------------------------*/
+               /* DMA Mode etc. */
+               data = EPn_STOP_MODE | EPn_STOP_SET  | EPn_DMAMODE0;
+               _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_DMA_CTRL, data);
+       } else {
+               /*---------------------------------------------------------*/
+               /* IN */
+               _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+
+               /*---------------------------------------------------------*/
+               /* DMA Mode etc. */
+               data = EPn_BURST_SET | EPn_DMAMODE0;
+               _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_DMA_CTRL, data);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+/* DMA setting release */
+static void _nbu2ss_ep_dma_exit(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+       u32             num;
+       u32             data;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (udc->vbus_active == 0)
+               return;         /* VBUS OFF */
+
+       data = _nbu2ss_readl(&preg->USBSSCONF);
+       if ((ep->epnum == 0) || ((data & (1 << ep->epnum)) == 0))
+               return;         /* Not Support DMA */
+
+       num = ep->epnum - 1;
+
+       _nbu2ss_ep_dma_abort(udc, ep);
+
+       if (ep->direct == USB_DIR_OUT) {
+               /*---------------------------------------------------------*/
+               /* OUT */
+               _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, 0);
+               _nbu2ss_bitclr(&preg->EP_DCR[num].EP_DCR1, DCR1_EPn_DIR0);
+               _nbu2ss_writel(&preg->EP_REGS[num].EP_DMA_CTRL, 0);
+       } else {
+               /*---------------------------------------------------------*/
+               /* IN */
+               _nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+               _nbu2ss_writel(&preg->EP_REGS[num].EP_DMA_CTRL, 0);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+/* Abort DMA */
+static void _nbu2ss_ep_dma_abort(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+       PT_FC_REGS      preg = udc->p_regs;
+
+       _nbu2ss_bitclr(&preg->EP_DCR[ep->epnum-1].EP_DCR1, DCR1_EPn_REQEN);
+       mdelay(DMA_DISABLE_TIME);       /* DCR1_EPn_REQEN Clear */
+       _nbu2ss_bitclr(&preg->EP_REGS[ep->epnum-1].EP_DMA_CTRL, EPn_DMA_EN);
+}
+
+/*-------------------------------------------------------------------------*/
+/* Start IN Transfer */
+static void _nbu2ss_ep_in_end(
+       struct nbu2ss_udc *udc,
+       u32 epnum,
+       u32 data32,
+       u32 length
+)
+{
+       u32             data;
+       u32             num;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (length >= sizeof(u32))
+               return;
+
+       if (epnum == 0) {
+               _nbu2ss_bitclr(&preg->EP0_CONTROL, EP0_AUTO);
+
+               /* Writing of 1-4 bytes */
+               if (length)
+                       _nbu2ss_writel(&preg->EP0_WRITE, data32);
+
+               data = ((length << 5) & EP0_DW) | EP0_DEND;
+               _nbu2ss_writel(&preg->EP0_CONTROL, data);
+
+               _nbu2ss_bitset(&preg->EP0_CONTROL, EP0_AUTO);
+       } else {
+               num = epnum - 1;
+
+               _nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+
+               /* Writing of 1-4 bytes */
+               if (length)
+                       _nbu2ss_writel(&preg->EP_REGS[num].EP_WRITE, data32);
+
+               data = (((((u32)length) << 5) & EPn_DW) | EPn_DEND);
+               _nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, data);
+
+               _nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, EPn_AUTO);
+       }
+
+       return;
+}
+
+#ifdef USE_DMA
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_dma_map_single(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u8              direct
+)
+{
+       if (req->req.dma == DMA_ADDR_INVALID) {
+               if (req->unaligned)
+                       req->req.dma = ep->phys_buf;
+               else {
+                       req->req.dma = dma_map_single(
+                               udc->gadget.dev.parent,
+                               req->req.buf,
+                               req->req.length,
+                               (direct == USB_DIR_IN)
+                               ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+               }
+               req->mapped = 1;
+       } else {
+               if (!req->unaligned)
+                       dma_sync_single_for_device(
+                               udc->gadget.dev.parent,
+                               req->req.dma,
+                               req->req.length,
+                               (direct == USB_DIR_IN)
+                               ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+               req->mapped = 0;
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_dma_unmap_single(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u8              direct
+)
+{
+       u8              data[4];
+       u8              *p;
+       u32             count = 0;
+
+       if (direct == USB_DIR_OUT) {
+               count = req->req.actual % 4;
+               if (count) {
+                       p = req->req.buf;
+                       p += (req->req.actual - count);
+                       memcpy(data, p, count);
+               }
+       }
+
+       if (req->mapped) {
+               if (req->unaligned) {
+                       if (direct == USB_DIR_OUT)
+                               memcpy(req->req.buf, ep->virt_buf,
+                                       req->req.actual & 0xfffffffc);
+               } else
+                       dma_unmap_single(udc->gadget.dev.parent,
+                               req->req.dma, req->req.length,
+                               (direct == USB_DIR_IN)
+                               ? DMA_TO_DEVICE
+                               : DMA_FROM_DEVICE);
+               req->req.dma = DMA_ADDR_INVALID;
+               req->mapped = 0;
+       } else {
+               if (!req->unaligned)
+                       dma_sync_single_for_cpu(udc->gadget.dev.parent,
+                               req->req.dma, req->req.length,
+                               (direct == USB_DIR_IN)
+                               ? DMA_TO_DEVICE
+                               : DMA_FROM_DEVICE);
+       }
+
+       if (count) {
+               p = req->req.buf;
+               p += (req->req.actual - count);
+               memcpy(p, data, count);
+       }
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 OUT Transfer (PIO) */
+static int EP0_out_PIO(struct nbu2ss_udc *udc, u8* pBuf, u32 length)
+{
+       u32             i;
+       int             nret   = 0;
+       u32             iWordLength = 0;
+       USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+       /*------------------------------------------------------------*/
+       /* Read Length */
+       iWordLength = length / sizeof(u32);
+
+       /*------------------------------------------------------------*/
+       /* PIO Read */
+       if (iWordLength) {
+               for (i = 0; i < iWordLength; i++) {
+                       pBuf32->dw = _nbu2ss_readl(&udc->p_regs->EP0_READ);
+                       pBuf32++;
+               }
+               nret = iWordLength * sizeof(u32);
+       }
+
+       return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 OUT Transfer (PIO, OverBytes) */
+static int EP0_out_OverBytes(struct nbu2ss_udc *udc, u8* pBuf, u32 length)
+{
+       u32             i;
+       u32             iReadSize = 0;
+       USB_REG_ACCESS  Temp32;
+       USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+       if ((0 < length) && (length < sizeof(u32))) {
+               Temp32.dw = _nbu2ss_readl(&udc->p_regs->EP0_READ);
+               for (i = 0 ; i < length ; i++)
+                       pBuf32->byte.DATA[i] = Temp32.byte.DATA[i];
+               iReadSize += length;
+       }
+
+       return iReadSize;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 IN Transfer (PIO) */
+static int EP0_in_PIO(struct nbu2ss_udc *udc, u8 *pBuf, u32 length)
+{
+       u32             i;
+       u32             iMaxLength   = EP0_PACKETSIZE;
+       u32             iWordLength  = 0;
+       u32             iWriteLength = 0;
+       USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+       /*------------------------------------------------------------*/
+       /* Transfer Length */
+       if (iMaxLength < length)
+               iWordLength = iMaxLength / sizeof(u32);
+       else
+               iWordLength = length / sizeof(u32);
+
+       /*------------------------------------------------------------*/
+       /* PIO */
+       for (i = 0; i < iWordLength; i++) {
+               _nbu2ss_writel(&udc->p_regs->EP0_WRITE, pBuf32->dw);
+               pBuf32++;
+               iWriteLength += sizeof(u32);
+       }
+
+       return iWriteLength;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Endpoint 0 IN Transfer (PIO, OverBytes) */
+static int EP0_in_OverBytes(struct nbu2ss_udc *udc, u8 *pBuf, u32 iRemainSize)
+{
+       u32             i;
+       USB_REG_ACCESS Temp32;
+       USB_REG_ACCESS* pBuf32 = (USB_REG_ACCESS *)pBuf;
+
+       if ((0 < iRemainSize) && (iRemainSize < sizeof(u32))) {
+               for (i = 0 ; i < iRemainSize ; i++)
+                       Temp32.byte.DATA[i] = pBuf32->byte.DATA[i];
+               _nbu2ss_ep_in_end(udc, 0, Temp32.dw, iRemainSize);
+
+               return iRemainSize;
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Transfer NULL Packet (Epndoint 0) */
+static int EP0_send_NULL(struct nbu2ss_udc *udc, bool pid_flag)
+{
+       u32             data;
+
+       data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+       data &= ~(u32)EP0_INAK;
+
+       if (pid_flag)
+               data |= (EP0_INAK_EN | EP0_PIDCLR | EP0_DEND);
+       else
+               data |= (EP0_INAK_EN | EP0_DEND);
+
+       _nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Receive NULL Packet (Endpoint 0) */
+static int EP0_receive_NULL(struct nbu2ss_udc *udc, bool pid_flag)
+{
+       u32             data;
+
+       data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+       data &= ~(u32)EP0_ONAK;
+
+       if (pid_flag)
+               data |= EP0_PIDCLR;
+
+       _nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_ep0_in_transfer(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req
+)
+{
+       u8              *pBuffer;                       /* IN Data Buffer */
+       u32             data;
+       u32             iRemainSize = 0;
+       int             result = 0;
+
+       /*-------------------------------------------------------------*/
+       /* End confirmation */
+       if (req->req.actual == req->req.length) {
+               if ((req->req.actual % EP0_PACKETSIZE) == 0) {
+                       if (req->zero) {
+                               req->zero = 0;
+                               EP0_send_NULL(udc, FALSE);
+                               return 1;
+                       }
+               }
+
+               return 0;               /* Transfer End */
+       }
+
+       /*-------------------------------------------------------------*/
+       /* NAK release */
+       data = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+       data |= EP0_INAK_EN;
+       data &= ~(u32)EP0_INAK;
+       _nbu2ss_writel(&udc->p_regs->EP0_CONTROL, data);
+
+       iRemainSize = req->req.length - req->req.actual;
+       pBuffer = (u8 *)req->req.buf;
+       pBuffer += req->req.actual;
+
+       /*-------------------------------------------------------------*/
+       /* Data transfer */
+       result = EP0_in_PIO(udc, pBuffer, iRemainSize);
+
+       req->div_len = result;
+       iRemainSize -= result;
+
+       if (iRemainSize == 0) {
+               EP0_send_NULL(udc, FALSE);
+               return result;
+       }
+
+       if ((iRemainSize < sizeof(u32)) && (result != EP0_PACKETSIZE)) {
+               pBuffer += result;
+               result += EP0_in_OverBytes(udc, pBuffer, iRemainSize);
+               req->div_len = result;
+       }
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_ep0_out_transfer(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req
+)
+{
+       u8              *pBuffer;
+       u32             iRemainSize;
+       u32             iRecvLength;
+       int             result = 0;
+       int             fRcvZero;
+
+       /*-------------------------------------------------------------*/
+       /* Receive data confirmation */
+       iRecvLength = _nbu2ss_readl(&udc->p_regs->EP0_LENGTH) & EP0_LDATA;
+       if (iRecvLength != 0) {
+
+               fRcvZero = 0;
+
+               iRemainSize = req->req.length - req->req.actual;
+               pBuffer = (u8 *)req->req.buf;
+               pBuffer += req->req.actual;
+
+               result = EP0_out_PIO(udc, pBuffer
+                                       , min(iRemainSize, iRecvLength));
+               if (result < 0)
+                       return result;
+
+               req->req.actual += result;
+               iRecvLength -= result;
+
+               if ((0 < iRecvLength) && (iRecvLength < sizeof(u32))) {
+                       pBuffer += result;
+                       iRemainSize -= result;
+
+                       result = EP0_out_OverBytes(udc, pBuffer
+                                       , min(iRemainSize, iRecvLength));
+                       req->req.actual += result;
+               }
+       } else {
+               fRcvZero = 1;
+       }
+
+       /*-------------------------------------------------------------*/
+       /* End confirmation */
+       if (req->req.actual == req->req.length) {
+               if ((req->req.actual % EP0_PACKETSIZE) == 0) {
+                       if (req->zero) {
+                               req->zero = 0;
+                               EP0_receive_NULL(udc, FALSE);
+                               return 1;
+                       }
+               }
+
+               return 0;               /* Transfer End */
+       }
+
+       if ((req->req.actual % EP0_PACKETSIZE) != 0)
+               return 0;               /* Short Packet Transfer End */
+
+       if (req->req.actual > req->req.length) {
+               ERR(" *** Overrun Error\n");
+               return -EOVERFLOW;
+       }
+
+       if (fRcvZero != 0) {
+               iRemainSize = _nbu2ss_readl(&udc->p_regs->EP0_CONTROL);
+               if (iRemainSize & EP0_ONAK) {
+                       /*---------------------------------------------------*/
+                       /* NACK release */
+                       _nbu2ss_bitclr(&udc->p_regs->EP0_CONTROL, EP0_ONAK);
+               }
+               result = 1;
+       }
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_out_dma(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_req *req,
+       u32             num,
+       u32             length
+)
+{
+       u8              *pBuffer;
+       u32             mpkt;
+       u32             lmpkt;
+       u32             dmacnt;
+       u32             burst = 1;
+       u32             data;
+       int             result = -EINVAL;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (req->dma_flag)
+               return 1;               /* DMA is forwarded */
+
+       req->dma_flag = TRUE;
+       pBuffer = (u8 *)req->req.dma;
+       pBuffer += req->req.actual;
+
+       /* DMA Address */
+       _nbu2ss_writel(&preg->EP_DCR[num].EP_TADR, (u32)pBuffer);
+
+       /* Number of transfer packets */
+       mpkt = _nbu2ss_readl(&preg->EP_REGS[num].EP_PCKT_ADRS) & EPn_MPKT;
+       dmacnt = (length / mpkt);
+       lmpkt = (length % mpkt) & ~(u32)0x03;
+
+       if (DMA_MAX_COUNT < dmacnt) {
+               dmacnt = DMA_MAX_COUNT;
+               lmpkt = 0;
+       } else if (0 != lmpkt) {
+               if (0 == dmacnt)
+                       burst = 0;      /* Burst OFF */
+               dmacnt++;
+       }
+
+       data = mpkt | (lmpkt << 16);
+       _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, data);
+
+       data = ((dmacnt & 0xff) << 16) | DCR1_EPn_DIR0 | DCR1_EPn_REQEN;
+       _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR1, data);
+
+       if (0 == burst) {
+               _nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT, 0);
+               _nbu2ss_bitclr(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_BURST_SET);
+       } else {
+               _nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT
+                               , (dmacnt << 16));
+               _nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_BURST_SET);
+       }
+       _nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_DMA_EN);
+
+       result = length & ~(u32)0x03;
+       req->div_len = result;
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_out_pio(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u32             length
+)
+{
+       u8              *pBuffer;
+       u32             i;
+       u32             data;
+       u32             iWordLength;
+       USB_REG_ACCESS  Temp32;
+       USB_REG_ACCESS  *pBuf32;
+       int             result = 0;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (req->dma_flag)
+               return 1;               /* DMA is forwarded */
+
+       if (length == 0)
+               return 0;
+
+       pBuffer = (u8 *)req->req.buf;
+       pBuf32 = (USB_REG_ACCESS *)(pBuffer + req->req.actual);
+
+       iWordLength = length / sizeof(u32);
+       if (iWordLength > 0) {
+               /*---------------------------------------------------------*/
+               /* Copy of every four bytes */
+               for (i = 0; i < iWordLength; i++) {
+                       pBuf32->dw =
+                       _nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_READ);
+                       pBuf32++;
+               }
+               result = iWordLength * sizeof(u32);
+       }
+
+       data = length - result;
+       if (data > 0) {
+               /*---------------------------------------------------------*/
+               /* Copy of fraction byte */
+               Temp32.dw = _nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_READ);
+               for (i = 0 ; i < data ; i++)
+                       pBuf32->byte.DATA[i] = Temp32.byte.DATA[i];
+               result += data;
+       }
+
+       req->req.actual += result;
+
+       if ((req->req.actual == req->req.length)
+                       || ((req->req.actual % ep->ep.maxpacket) != 0)) {
+
+               result = 0;
+       }
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_out_data(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u32             data_size
+)
+{
+       u32             num;
+       u32             iBufSize;
+       int             nret = 1;
+
+       if (ep->epnum == 0)
+               return -EINVAL;
+
+       num = ep->epnum - 1;
+
+       iBufSize = min((req->req.length - req->req.actual), data_size);
+
+       if ((ep->ep_type != USB_ENDPOINT_XFER_INT)
+               && (req->req.dma != 0)
+               && (iBufSize  >= sizeof(u32))) {
+               nret = _nbu2ss_out_dma(udc, req, num, iBufSize);
+       } else {
+               iBufSize = min(iBufSize, (u32)ep->ep.maxpacket);
+               nret = _nbu2ss_epn_out_pio(udc, ep, req, iBufSize);
+       }
+
+       return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_out_transfer(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req
+)
+{
+       u32             num;
+       u32             iRecvLength;
+       int             result = 1;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (ep->epnum == 0)
+               return -EINVAL;
+
+       num = ep->epnum - 1;
+
+       /*-------------------------------------------------------------*/
+       /* Receive Length */
+       iRecvLength
+               = _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT) & EPn_LDATA;
+
+       if (iRecvLength != 0) {
+               result = _nbu2ss_epn_out_data(udc, ep, req, iRecvLength);
+               if (iRecvLength < ep->ep.maxpacket) {
+                       if (iRecvLength == result) {
+                               req->req.actual += result;
+                               result = 0;
+                       }
+               }
+       } else {
+               if ((req->req.actual == req->req.length)
+                       || ((req->req.actual % ep->ep.maxpacket) != 0)) {
+
+                       result = 0;
+               }
+       }
+
+       if (result == 0) {
+               if ((req->req.actual % ep->ep.maxpacket) == 0) {
+                       if (req->zero) {
+                               req->zero = 0;
+                               return 1;
+                       }
+               }
+       }
+
+       if (req->req.actual > req->req.length) {
+               ERR(" *** Overrun Error\n");
+               ERR(" *** actual = %d, length = %d\n",
+                       req->req.actual, req->req.length);
+               result = -EOVERFLOW;
+       }
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_in_dma(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u32             num,
+       u32             length
+)
+{
+       u8              *pBuffer;
+       u32             mpkt;           /* MaxPacketSize */
+       u32             lmpkt;          /* Last Packet Data Size */
+       u32             dmacnt;         /* IN Data Size */
+       u32             iWriteLength;
+       u32             data;
+       int             result = -EINVAL;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (req->dma_flag)
+               return 1;               /* DMA is forwarded */
+
+#ifdef USE_DMA
+       if (req->req.actual == 0)
+               _nbu2ss_dma_map_single(udc, ep, req, USB_DIR_IN);
+#endif
+       req->dma_flag = TRUE;
+
+       /* MAX Packet Size */
+       mpkt = _nbu2ss_readl(&preg->EP_REGS[num].EP_PCKT_ADRS) & EPn_MPKT;
+
+       if ((DMA_MAX_COUNT * mpkt) < length)
+               iWriteLength = DMA_MAX_COUNT * mpkt;
+       else
+               iWriteLength = length;
+
+       /*------------------------------------------------------------*/
+       /* Number of transmission packets */
+       if (mpkt < iWriteLength) {
+               dmacnt = iWriteLength / mpkt;
+               lmpkt  = (iWriteLength % mpkt) & ~(u32)0x3;
+               if (lmpkt != 0)
+                       dmacnt++;
+               else
+                       lmpkt = mpkt & ~(u32)0x3;
+
+       } else {
+               dmacnt = 1;
+               lmpkt  = iWriteLength & ~(u32)0x3;
+       }
+
+       /* Packet setting */
+       data = mpkt | (lmpkt << 16);
+       _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR2, data);
+
+       /* Address setting */
+       pBuffer = (u8 *)req->req.dma;
+       pBuffer += req->req.actual;
+       _nbu2ss_writel(&preg->EP_DCR[num].EP_TADR, (u32)pBuffer);
+
+       /* Packet and DMA setting */
+       data = ((dmacnt & 0xff) << 16) | DCR1_EPn_REQEN;
+       _nbu2ss_writel(&preg->EP_DCR[num].EP_DCR1, data);
+
+       /* Packet setting of EPC */
+       data = dmacnt << 16;
+       _nbu2ss_writel(&preg->EP_REGS[num].EP_LEN_DCNT, data);
+
+       /*DMA setting of EPC */
+       _nbu2ss_bitset(&preg->EP_REGS[num].EP_DMA_CTRL, EPn_DMA_EN);
+
+       result = iWriteLength & ~(u32)0x3;
+       req->div_len = result;
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_in_pio(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u32             length
+)
+{
+       u8              *pBuffer;
+       u32             i;
+       u32             data;
+       u32             iWordLength;
+       USB_REG_ACCESS  Temp32;
+       USB_REG_ACCESS  *pBuf32 = NULL;
+       int             result = 0;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (req->dma_flag)
+               return 1;               /* DMA is forwarded */
+
+       if (length > 0) {
+               pBuffer = (u8 *)req->req.buf;
+               pBuf32 = (USB_REG_ACCESS *)(pBuffer + req->req.actual);
+
+               iWordLength = length / sizeof(u32);
+               if (iWordLength > 0) {
+                       for (i = 0; i < iWordLength; i++) {
+                               _nbu2ss_writel(
+                                       &preg->EP_REGS[ep->epnum-1].EP_WRITE
+                                       , pBuf32->dw
+                               );
+
+                               pBuf32++;
+                       }
+                       result = iWordLength * sizeof(u32);
+               }
+       }
+
+       if (result != ep->ep.maxpacket) {
+               data = length - result;
+               Temp32.dw = 0;
+               for (i = 0 ; i < data ; i++)
+                       Temp32.byte.DATA[i] = pBuf32->byte.DATA[i];
+
+               _nbu2ss_ep_in_end(udc, ep->epnum, Temp32.dw, data);
+               result += data;
+       }
+
+       req->div_len = result;
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_in_data(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       u32             data_size
+)
+{
+       u32             num;
+       int             nret = 1;
+
+       if (ep->epnum == 0)
+               return -EINVAL;
+
+       num = ep->epnum - 1;
+
+       if ((ep->ep_type != USB_ENDPOINT_XFER_INT)
+               && (req->req.dma != 0)
+               && (data_size >= sizeof(u32))) {
+               nret = _nbu2ss_in_dma(udc, ep, req, num, data_size);
+       } else {
+               data_size = min(data_size, (u32)ep->ep.maxpacket);
+               nret = _nbu2ss_epn_in_pio(udc, ep, req, data_size);
+       }
+
+       return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_epn_in_transfer(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req
+)
+{
+       u32             num;
+       u32             iBufSize;
+       int             result = 0;
+       u32             status;
+
+       if (ep->epnum == 0)
+               return -EINVAL;
+
+       num = ep->epnum - 1;
+
+       status = _nbu2ss_readl(&udc->p_regs->EP_REGS[num].EP_STATUS);
+
+       /*-------------------------------------------------------------*/
+       /* State confirmation of FIFO */
+       if (req->req.actual == 0) {
+               if ((status & EPn_IN_EMPTY) == 0)
+                       return 1;       /* Not Empty */
+
+       } else {
+               if ((status & EPn_IN_FULL) != 0)
+                       return 1;       /* Not Empty */
+       }
+
+       /*-------------------------------------------------------------*/
+       /* Start tranfer */
+       iBufSize = req->req.length - req->req.actual;
+       if (iBufSize > 0)
+               result = _nbu2ss_epn_in_data(udc, ep, req, iBufSize);
+       else if (req->req.length == 0)
+               _nbu2ss_zero_len_pkt(udc, ep->epnum);
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_start_transfer(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       bool    bflag)
+{
+       int             nret = -EINVAL;
+
+       req->dma_flag = FALSE;
+       req->div_len = 0;
+
+       if (req->req.length == 0)
+               req->zero = 0;
+       else {
+               if ((req->req.length % ep->ep.maxpacket) == 0)
+                       req->zero = req->req.zero;
+               else
+                       req->zero = 0;
+       }
+
+       if (ep->epnum == 0) {
+               /* EP0 */
+               switch (udc->ep0state) {
+               case EP0_IN_DATA_PHASE:
+                       nret = _nbu2ss_ep0_in_transfer(udc, ep, req);
+                       break;
+
+               case EP0_OUT_DATA_PHASE:
+                       nret = _nbu2ss_ep0_out_transfer(udc, ep, req);
+                       break;
+
+               case EP0_IN_STATUS_PHASE:
+                       nret = EP0_send_NULL(udc, TRUE);
+                       break;
+
+               default:
+                       break;
+               }
+
+       } else {
+               /* EPn */
+               if (ep->direct == USB_DIR_OUT) {
+                       /* OUT */
+                       if (bflag == FALSE)
+                               nret = _nbu2ss_epn_out_transfer(udc, ep, req);
+               } else {
+                       /* IN */
+                       nret = _nbu2ss_epn_in_transfer(udc, ep, req);
+               }
+       }
+
+       return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_restert_transfer(struct nbu2ss_ep *ep)
+{
+       u32             length;
+       bool    bflag = FALSE;
+       struct nbu2ss_req *req;
+
+       if (list_empty(&ep->queue))
+               req = NULL;
+       else
+               req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+       if (req == NULL)
+               return;
+
+       if (ep->epnum > 0) {
+               length = _nbu2ss_readl(
+                       &ep->udc->p_regs->EP_REGS[ep->epnum-1].EP_LEN_DCNT);
+
+               length &= EPn_LDATA;
+               if (length < ep->ep.maxpacket)
+                       bflag = TRUE;
+       }
+
+       _nbu2ss_start_transfer(ep->udc, ep, req, bflag);
+}
+
+/*-------------------------------------------------------------------------*/
+/*     Endpoint Toggle Reset */
+static void _nbu2ss_endpoint_toggle_reset(
+       struct nbu2ss_udc *udc,
+       u8 ep_adrs)
+{
+       u8              num;
+       u32             data;
+
+       if ((ep_adrs == 0) || (ep_adrs == 0x80))
+               return;
+
+       num = (ep_adrs & 0x7F) - 1;
+
+       if (ep_adrs & USB_DIR_IN)
+               data = EPn_IPIDCLR;
+       else
+               data = EPn_BCLR | EPn_OPIDCLR;
+
+       _nbu2ss_bitset(&udc->p_regs->EP_REGS[num].EP_CONTROL, data);
+}
+
+/*-------------------------------------------------------------------------*/
+/*     Endpoint STALL set */
+static void _nbu2ss_set_endpoint_stall(
+       struct nbu2ss_udc *udc,
+       u8 ep_adrs,
+       bool bstall)
+{
+       u8              num, epnum;
+       u32             data;
+       struct nbu2ss_ep *ep;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if ((ep_adrs == 0) || (ep_adrs == 0x80)) {
+               if (bstall) {
+                       /* Set STALL */
+                       _nbu2ss_bitset(&preg->EP0_CONTROL, EP0_STL);
+               } else {
+                       /* Clear STALL */
+                       _nbu2ss_bitclr(&preg->EP0_CONTROL, EP0_STL);
+               }
+       } else {
+               epnum = ep_adrs & USB_ENDPOINT_NUMBER_MASK;
+               num = epnum - 1;
+               ep = &udc->ep[epnum];
+
+               if (bstall) {
+                       /* Set STALL */
+                       ep->halted = TRUE;
+
+                       if (ep_adrs & USB_DIR_IN)
+                               data = EPn_BCLR | EPn_ISTL;
+                       else
+                               data = EPn_OSTL_EN | EPn_OSTL;
+
+                       _nbu2ss_bitset(&preg->EP_REGS[num].EP_CONTROL, data);
+               } else {
+                       /* Clear STALL */
+                       ep->stalled = FALSE;
+                       if (ep_adrs & USB_DIR_IN) {
+                               _nbu2ss_bitclr(&preg->EP_REGS[num].EP_CONTROL
+                                               , EPn_ISTL);
+                       } else {
+                               data =
+                               _nbu2ss_readl(&preg->EP_REGS[num].EP_CONTROL);
+
+                               data &= ~EPn_OSTL;
+                               data |= EPn_OSTL_EN;
+
+                               _nbu2ss_writel(&preg->EP_REGS[num].EP_CONTROL
+                                               , data);
+                       }
+
+                       ep->stalled = FALSE;
+                       if (ep->halted) {
+                               ep->halted = FALSE;
+                               _nbu2ss_restert_transfer(ep);
+                       }
+               }
+       }
+
+       return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+/* Device Descriptor */
+static struct usb_device_descriptor device_desc = {
+       .bLength              = sizeof(device_desc),
+       .bDescriptorType      = USB_DT_DEVICE,
+       .bcdUSB               = __constant_cpu_to_le16(0x0200),
+       .bDeviceClass         = USB_CLASS_VENDOR_SPEC,
+       .bDeviceSubClass      = 0x00,
+       .bDeviceProtocol      = 0x00,
+       .bMaxPacketSize0      = 64,
+       .idVendor             = __constant_cpu_to_le16 (0x0409),
+       .idProduct            = __constant_cpu_to_le16 (0xfff0),
+       .bcdDevice            = 0xffff,
+       .iManufacturer        = 0x00,
+       .iProduct             = 0x00,
+       .iSerialNumber        = 0x00,
+       .bNumConfigurations   = 0x01,
+};
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_set_test_mode(struct nbu2ss_udc *udc, u32 mode)
+{
+       u32             data;
+
+       if (mode > MAX_TEST_MODE_NUM)
+               return;
+
+       pr_info("SET FEATURE : test mode = %d\n", mode);
+
+       data = _nbu2ss_readl(&udc->p_regs->USB_CONTROL);
+       data &= ~TEST_FORCE_ENABLE;
+       data |= mode << TEST_MODE_SHIFT;
+
+       _nbu2ss_writel(&udc->p_regs->USB_CONTROL, data);
+       _nbu2ss_bitset(&udc->p_regs->TEST_CONTROL, CS_TESTMODEEN);
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_set_feature_device(
+       struct nbu2ss_udc *udc,
+       u16 selector,
+       u16 wIndex
+)
+{
+       int     result = -EOPNOTSUPP;
+
+       switch (selector) {
+       case USB_DEVICE_REMOTE_WAKEUP:
+               if (0x0000 == wIndex) {
+                       udc->remote_wakeup = U2F_ENABLE;
+                       result = 0;
+               }
+               break;
+
+       case USB_DEVICE_TEST_MODE:
+               wIndex = wIndex >> 8;
+               if (wIndex <= MAX_TEST_MODE_NUM)
+                       result = 0;
+               break;
+
+       default:
+               break;
+       }
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_get_ep_stall(struct nbu2ss_udc *udc, u8 ep_adrs)
+{
+       u8              epnum;
+       u32             data = 0, bit_data;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       epnum = ep_adrs & ~USB_ENDPOINT_DIR_MASK;
+       if (epnum == 0) {
+               data = _nbu2ss_readl(&preg->EP0_CONTROL);
+               bit_data = EP0_STL;
+
+       } else {
+               data = _nbu2ss_readl(&preg->EP_REGS[epnum-1].EP_CONTROL);
+               if ((data & EPn_EN) == 0)
+                       return -1;
+
+               if (ep_adrs & USB_ENDPOINT_DIR_MASK)
+                       bit_data = EPn_ISTL;
+               else
+                       bit_data = EPn_OSTL;
+       }
+
+       if ((data & bit_data) == 0)
+               return 0;
+       else
+               return 1;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_req_feature(struct nbu2ss_udc *udc, bool bset)
+{
+       u8      recipient = (u8)(udc->ctrl.bRequestType & USB_RECIP_MASK);
+       u8      direction = (u8)(udc->ctrl.bRequestType & USB_DIR_IN);
+       u16     selector  = udc->ctrl.wValue;
+       u16     wIndex    = udc->ctrl.wIndex;
+       u8      ep_adrs;
+       int     result = -EOPNOTSUPP;
+
+       if ((0x0000 != udc->ctrl.wLength) ||
+                       (USB_DIR_OUT != direction)) {
+               return -EINVAL;
+       }
+
+       switch (recipient) {
+       case USB_RECIP_DEVICE:
+               if (bset)
+                       result =
+                       _nbu2ss_set_feature_device(udc, selector, wIndex);
+               break;
+
+       case USB_RECIP_ENDPOINT:
+               if (0x0000 == (wIndex & 0xFF70)) {
+                       if (USB_ENDPOINT_HALT == selector) {
+                               ep_adrs = wIndex & 0xFF;
+                               if (bset == FALSE) {
+                                       _nbu2ss_endpoint_toggle_reset(
+                                               udc, ep_adrs);
+                               }
+
+                               _nbu2ss_set_endpoint_stall(
+                                       udc, ep_adrs, bset);
+
+                               result = 0;
+                       }
+               }
+               break;
+
+       default:
+               break;
+       }
+
+       if (result >= 0)
+               _nbu2ss_create_ep0_packet(udc, udc->ep0_buf, 0);
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline enum usb_device_speed _nbu2ss_get_speed(struct nbu2ss_udc *udc)
+{
+       u32             data;
+       enum usb_device_speed speed = USB_SPEED_FULL;
+
+       data = _nbu2ss_readl(&udc->p_regs->USB_STATUS);
+       if (data & HIGH_SPEED)
+               speed = USB_SPEED_HIGH;
+
+       return speed;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_epn_set_stall(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep
+)
+{
+       u8      ep_adrs;
+       u32     regdata;
+       int     limit_cnt = 0;
+
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (ep->direct == USB_DIR_IN) {
+               for (limit_cnt = 0
+                       ; limit_cnt < IN_DATA_EMPTY_COUNT
+                       ; limit_cnt++) {
+
+                       regdata = _nbu2ss_readl(
+                               &preg->EP_REGS[ep->epnum-1].EP_STATUS);
+
+                       if ((regdata & EPn_IN_DATA) == 0)
+                               break;
+
+                       mdelay(1);
+               }
+       }
+
+       ep_adrs = ep->epnum | ep->direct;
+       _nbu2ss_set_endpoint_stall(udc, ep_adrs, 1);
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_get_status(struct nbu2ss_udc *udc)
+{
+       u32     length;
+       u16     status_data = 0;
+       u8      recipient = (u8)(udc->ctrl.bRequestType & USB_RECIP_MASK);
+       u8      direction = (u8)(udc->ctrl.bRequestType & USB_DIR_IN);
+       u8      ep_adrs;
+       int     result = -EINVAL;
+
+       if ((0x0000 != udc->ctrl.wValue)
+               || (USB_DIR_IN != direction)) {
+
+               return result;
+       }
+
+       length = min(udc->ctrl.wLength, (u16)sizeof(status_data));
+
+       switch (recipient) {
+       case USB_RECIP_DEVICE:
+               if (udc->ctrl.wIndex == 0x0000) {
+                       if (udc->self_powered)
+                               status_data |= (1 << USB_DEVICE_SELF_POWERED);
+
+                       if (udc->remote_wakeup)
+                               status_data |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+
+                       result = 0;
+               }
+               break;
+
+       case USB_RECIP_ENDPOINT:
+               if (0x0000 == (udc->ctrl.wIndex & 0xFF70)) {
+                       ep_adrs = (u8)(udc->ctrl.wIndex & 0xFF);
+                       result = _nbu2ss_get_ep_stall(udc, ep_adrs);
+
+                       if (result > 0)
+                               status_data |= (1 << USB_ENDPOINT_HALT);
+               }
+               break;
+
+       default:
+               break;
+       }
+
+       if (result >= 0) {
+               memcpy(udc->ep0_buf, &status_data, length);
+               _nbu2ss_create_ep0_packet(udc, udc->ep0_buf, length);
+               _nbu2ss_ep0_in_transfer(udc, &udc->ep[0], &udc->ep0_req);
+
+       } else {
+               ERR("*** Error GET_STATUS\n");
+       }
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_clear_feature(struct nbu2ss_udc *udc)
+{
+       return _nbu2ss_req_feature(udc, FALSE);
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_set_feature(struct nbu2ss_udc *udc)
+{
+       return _nbu2ss_req_feature(udc, TRUE);
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_set_address(struct nbu2ss_udc *udc)
+{
+       int             result = 0;
+       u32             wValue = udc->ctrl.wValue;
+
+       if ((0x00 != udc->ctrl.bRequestType)    ||
+               (0x0000 != udc->ctrl.wIndex)    ||
+               (0x0000 != udc->ctrl.wLength)) {
+               return -EINVAL;
+       }
+
+       if (wValue != (wValue & 0x007F))
+               return -EINVAL;
+
+       wValue = wValue << USB_ADRS_SHIFT;
+
+       _nbu2ss_writel(&udc->p_regs->USB_ADDRESS, wValue);
+       _nbu2ss_create_ep0_packet(udc, udc->ep0_buf, 0);
+
+       return result;
+}
+
+/*-------------------------------------------------------------------------*/
+static int std_req_set_configuration(struct nbu2ss_udc *udc)
+{
+       u32 ConfigValue = (u32)(udc->ctrl.wValue & 0x00ff);
+
+       if ((0x0000 != udc->ctrl.wIndex)        ||
+               (0x0000 != udc->ctrl.wLength)   ||
+               (0x00 != udc->ctrl.bRequestType)) {
+               return -EINVAL;
+       }
+
+       udc->curr_config = ConfigValue;
+
+       if (ConfigValue > 0) {
+               _nbu2ss_bitset(&udc->p_regs->USB_CONTROL, CONF);
+               udc->devstate = USB_STATE_CONFIGURED;
+
+       } else {
+               _nbu2ss_bitclr(&udc->p_regs->USB_CONTROL, CONF);
+               udc->devstate = USB_STATE_ADDRESS;
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_read_request_data(struct nbu2ss_udc *udc, u32 *pdata)
+{
+       if ((udc == NULL) && (pdata == NULL))
+               return;
+
+       *pdata = _nbu2ss_readl(&udc->p_regs->SETUP_DATA0);
+       pdata++;
+       *pdata = _nbu2ss_readl(&udc->p_regs->SETUP_DATA1);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_decode_request(struct nbu2ss_udc *udc)
+{
+       bool                    bcall_back = TRUE;
+       int                     nret = -EINVAL;
+       struct usb_ctrlrequest  *p_ctrl;
+
+       p_ctrl = &udc->ctrl;
+       _nbu2ss_read_request_data(udc, (u32 *)p_ctrl);
+
+       /* ep0 state control */
+       if (p_ctrl->wLength == 0) {
+               udc->ep0state = EP0_IN_STATUS_PHASE;
+
+       } else {
+               if (p_ctrl->bRequestType & USB_DIR_IN)
+                       udc->ep0state = EP0_IN_DATA_PHASE;
+               else
+                       udc->ep0state = EP0_OUT_DATA_PHASE;
+       }
+
+       if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+               switch (p_ctrl->bRequest) {
+               case USB_REQ_GET_STATUS:
+                       nret = std_req_get_status(udc);
+                       bcall_back = FALSE;
+                       break;
+
+               case USB_REQ_CLEAR_FEATURE:
+                       nret = std_req_clear_feature(udc);
+                       bcall_back = FALSE;
+                       break;
+
+               case USB_REQ_SET_FEATURE:
+                       nret = std_req_set_feature(udc);
+                       bcall_back = FALSE;
+                       break;
+
+               case USB_REQ_SET_ADDRESS:
+                       nret = std_req_set_address(udc);
+                       bcall_back = FALSE;
+                       break;
+
+               case USB_REQ_SET_CONFIGURATION:
+                       nret = std_req_set_configuration(udc);
+                       break;
+
+               default:
+                       break;
+               }
+       }
+
+       if (bcall_back == FALSE) {
+               if (udc->ep0state == EP0_IN_STATUS_PHASE) {
+                       if (nret >= 0) {
+                               /*--------------------------------------*/
+                               /* Status Stage */
+                               nret = EP0_send_NULL(udc, TRUE);
+                       }
+               }
+
+       } else {
+               spin_unlock(&udc->lock);
+               nret = udc->driver->setup(&udc->gadget, &udc->ctrl);
+               spin_lock(&udc->lock);
+       }
+
+       if (nret < 0)
+               udc->ep0state = EP0_IDLE;
+
+       return nret;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_ep0_in_data_stage(struct nbu2ss_udc *udc)
+{
+       int                     nret;
+       struct nbu2ss_req       *req;
+       struct nbu2ss_ep        *ep = &udc->ep[0];
+
+       if (list_empty(&ep->queue))
+               req = NULL;
+       else
+               req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+       if (req == NULL)
+               req = &udc->ep0_req;
+
+       req->req.actual += req->div_len;
+       req->div_len = 0;
+
+       nret = _nbu2ss_ep0_in_transfer(udc, ep, req);
+       if (nret == 0) {
+               udc->ep0state = EP0_OUT_STATUS_PAHSE;
+               EP0_receive_NULL(udc, TRUE);
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_ep0_out_data_stage(struct nbu2ss_udc *udc)
+{
+       int                     nret;
+       struct nbu2ss_req       *req;
+       struct nbu2ss_ep        *ep = &udc->ep[0];
+
+       if (list_empty(&ep->queue))
+               req = NULL;
+       else
+               req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+       if (req == NULL)
+               req = &udc->ep0_req;
+
+       nret = _nbu2ss_ep0_out_transfer(udc, ep, req);
+       if (nret == 0) {
+               udc->ep0state = EP0_IN_STATUS_PHASE;
+               EP0_send_NULL(udc, TRUE);
+
+       } else if (nret < 0) {
+               _nbu2ss_bitset(&udc->p_regs->EP0_CONTROL, EP0_BCLR);
+               req->req.status = nret;
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline int _nbu2ss_ep0_status_stage(struct nbu2ss_udc *udc)
+{
+       struct nbu2ss_req       *req;
+       struct nbu2ss_ep        *ep = &udc->ep[0];
+
+       if (list_empty(&ep->queue))
+               req = NULL;
+       else
+               req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+       if (req == NULL) {
+               req = &udc->ep0_req;
+               if (req->req.complete)
+                       req->req.complete(&ep->ep, &req->req);
+
+       } else {
+               if (req->req.complete)
+                       _nbu2ss_ep_done(ep, req, 0);
+       }
+
+       udc->ep0state = EP0_IDLE;
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_ep0_int(struct nbu2ss_udc *udc)
+{
+       int             i;
+       u32             status;
+       u32             intr;
+       int             nret = -1;
+
+       status = _nbu2ss_readl(&udc->p_regs->EP0_STATUS);
+       intr = status & EP0_STATUS_RW_BIT;
+       _nbu2ss_writel(&udc->p_regs->EP0_STATUS, ~(u32)intr);
+
+       status &= (SETUP_INT | EP0_IN_INT | EP0_OUT_INT
+                       | STG_END_INT | EP0_OUT_NULL_INT);
+
+       if (status == 0) {
+               pr_info("--- %s Not Decode Interrupt\n", __func__);
+               pr_info("--- EP0_STATUS = 0x%08x\n", intr);
+               return;
+       }
+
+       if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+               udc->gadget.speed = _nbu2ss_get_speed(udc);
+
+       for (i = 0; i < EP0_END_XFER; i++) {
+               switch (udc->ep0state) {
+               case EP0_IDLE:
+                       if (status & SETUP_INT) {
+                               status = 0;
+                               nret = _nbu2ss_decode_request(udc);
+                       }
+                       break;
+
+               case EP0_IN_DATA_PHASE:
+                       if (status & EP0_IN_INT) {
+                               status &= ~EP0_IN_INT;
+                               nret = _nbu2ss_ep0_in_data_stage(udc);
+                       }
+                       break;
+
+               case EP0_OUT_DATA_PHASE:
+                       if (status & EP0_OUT_INT) {
+                               status &= ~EP0_OUT_INT;
+                               nret = _nbu2ss_ep0_out_data_stage(udc);
+                       }
+                       break;
+
+               case EP0_IN_STATUS_PHASE:
+                       if ((status & STG_END_INT) || (status & SETUP_INT)) {
+                               status &= ~(STG_END_INT | EP0_IN_INT);
+                               nret = _nbu2ss_ep0_status_stage(udc);
+                       }
+                       break;
+
+               case EP0_OUT_STATUS_PAHSE:
+                       if ((status & STG_END_INT)
+                       || (status & SETUP_INT)
+                       || (status & EP0_OUT_NULL_INT)) {
+                               status &= ~(STG_END_INT
+                                               | EP0_OUT_INT
+                                               | EP0_OUT_NULL_INT);
+
+                               nret = _nbu2ss_ep0_status_stage(udc);
+                       }
+
+                       break;
+
+               default:
+                       status = 0;
+                       break;
+               }
+
+               if (status == 0)
+                       break;
+       }
+
+       if (nret < 0) {
+               /* Send Stall */
+               _nbu2ss_set_endpoint_stall(udc, 0, TRUE);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_ep_done(
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req,
+       int status)
+{
+       struct nbu2ss_udc *udc = ep->udc;
+
+       list_del_init(&req->queue);
+
+       if (status == -ECONNRESET)
+               _nbu2ss_fifo_flush(udc, ep);
+
+       if (likely(req->req.status == -EINPROGRESS))
+               req->req.status = status;
+
+       if (ep->stalled)
+               _nbu2ss_epn_set_stall(udc, ep);
+       else {
+               if (!list_empty(&ep->queue))
+                       _nbu2ss_restert_transfer(ep);
+       }
+
+#ifdef USE_DMA
+       if ((ep->direct == USB_DIR_OUT) && (ep->epnum > 0) &&
+                       (req->req.dma != 0))
+               _nbu2ss_dma_unmap_single(udc, ep, req, USB_DIR_OUT);
+#endif
+
+       spin_unlock(&udc->lock);
+       req->req.complete(&ep->ep, &req->req);
+       spin_lock(&udc->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_in_int(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req)
+{
+       int     result = 0;
+       u32     status;
+
+       PT_FC_REGS      preg = udc->p_regs;
+
+       if (req->dma_flag)
+               return;         /* DMA is forwarded */
+
+       req->req.actual += req->div_len;
+       req->div_len = 0;
+
+       if (req->req.actual != req->req.length) {
+               /*---------------------------------------------------------*/
+               /* remainder of data */
+               result = _nbu2ss_epn_in_transfer(udc, ep, req);
+
+       } else {
+               if ((req->zero != 0)
+               && ((req->req.actual % ep->ep.maxpacket) == 0)) {
+
+                       status =
+                       _nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_STATUS);
+
+                       if ((status & EPn_IN_FULL) == 0) {
+                               /*-----------------------------------------*/
+                               /* 0 Length Packet */
+                               req->zero = 0;
+                               _nbu2ss_zero_len_pkt(udc, ep->epnum);
+                       }
+                       return;
+               }
+       }
+
+       if (result <= 0) {
+               /*---------------------------------------------------------*/
+               /* Complete */
+               _nbu2ss_ep_done(ep, req, result);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_out_int(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req)
+{
+       int     result;
+
+       result = _nbu2ss_epn_out_transfer(udc, ep, req);
+       if (result <= 0)
+               _nbu2ss_ep_done(ep, req, result);
+
+       return;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_in_dma_int(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req)
+{
+       u32             mpkt;
+       u32             size;
+       struct usb_request *preq;
+
+       preq = &req->req;
+
+       if (req->dma_flag == FALSE)
+               return;
+
+       preq->actual += req->div_len;
+       req->div_len = 0;
+       req->dma_flag = FALSE;
+
+#ifdef USE_DMA
+       _nbu2ss_dma_unmap_single(udc, ep, req, USB_DIR_IN);
+#endif
+
+       if (preq->actual != preq->length) {
+               _nbu2ss_epn_in_transfer(udc, ep, req);
+       } else {
+               mpkt = ep->ep.maxpacket;
+               size = preq->actual % mpkt;
+               if (size > 0) {
+                       if (((preq->actual & 0x03) == 0) && (size < mpkt))
+                               _nbu2ss_ep_in_end(udc, ep->epnum, 0, 0);
+               } else {
+                       _nbu2ss_epn_in_int(udc, ep, req);
+               }
+       }
+
+       return;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_out_dma_int(
+       struct nbu2ss_udc *udc,
+       struct nbu2ss_ep *ep,
+       struct nbu2ss_req *req)
+{
+       int             i;
+       u32             num;
+       u32             dmacnt, ep_dmacnt;
+       u32             mpkt;
+       PT_FC_REGS      preg = udc->p_regs;
+
+       num = ep->epnum - 1;
+
+       if (req->req.actual == req->req.length) {
+               if ((req->req.length % ep->ep.maxpacket)
+                               && (req->zero == 0)) {
+                       req->div_len = 0;
+                       req->dma_flag = FALSE;
+                       _nbu2ss_ep_done(ep, req, 0);
+                       return;
+               }
+       }
+
+       ep_dmacnt = _nbu2ss_readl(&preg->EP_REGS[num].EP_LEN_DCNT)
+                & EPn_DMACNT;
+       ep_dmacnt >>= 16;
+
+       for (i = 0; i < EPC_PLL_LOCK_COUNT; i++) {
+               dmacnt = _nbu2ss_readl(&preg->EP_DCR[num].EP_DCR1)
+                        & DCR1_EPn_DMACNT;
+               dmacnt >>= 16;
+               if (ep_dmacnt == dmacnt)
+                       break;
+       }
+
+       _nbu2ss_bitclr(&preg->EP_DCR[num].EP_DCR1, DCR1_EPn_REQEN);
+
+       if (dmacnt != 0) {
+               mpkt = ep->ep.maxpacket;
+               if ((req->div_len % mpkt) == 0)
+                       req->div_len -= mpkt * dmacnt;
+       }
+
+       if ((req->req.actual % ep->ep.maxpacket) > 0) {
+               if (req->req.actual == req->div_len) {
+                       req->div_len = 0;
+                       req->dma_flag = FALSE;
+                       _nbu2ss_ep_done(ep, req, 0);
+                       return;
+               }
+       }
+
+       req->req.actual += req->div_len;
+       req->div_len = 0;
+       req->dma_flag = FALSE;
+
+       _nbu2ss_epn_out_int(udc, ep, req);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_epn_int(struct nbu2ss_udc *udc, u32 epnum)
+{
+       u32     num;
+       u32     status;
+
+       struct nbu2ss_req       *req;
+       struct nbu2ss_ep        *ep = &udc->ep[epnum];
+
+       num = epnum - 1;
+
+       /* Interrupt Status */
+       status = _nbu2ss_readl(&udc->p_regs->EP_REGS[num].EP_STATUS);
+
+       /* Interrupt Clear */
+       _nbu2ss_writel(&udc->p_regs->EP_REGS[num].EP_STATUS, ~(u32)status);
+
+       if (list_empty(&ep->queue))
+               req = NULL;
+       else
+               req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+
+       if (req == NULL) {
+               /* pr_warning("=== %s(%d) req == NULL\n", __func__, epnum); */
+               return;
+       }
+
+       if (status & EPn_OUT_END_INT) {
+               status &= ~EPn_OUT_INT;
+               _nbu2ss_epn_out_dma_int(udc, ep, req);
+       }
+
+       if (status & EPn_OUT_INT)
+               _nbu2ss_epn_out_int(udc, ep, req);
+
+       if (status & EPn_IN_END_INT) {
+               status &= ~EPn_IN_INT;
+               _nbu2ss_epn_in_dma_int(udc, ep, req);
+       }
+
+       if (status & EPn_IN_INT)
+               _nbu2ss_epn_in_int(udc, ep, req);
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_ep_int(struct nbu2ss_udc *udc, u32 epnum)
+{
+       if (epnum == 0)
+               _nbu2ss_ep0_int(udc);
+       else
+               _nbu2ss_epn_int(udc, epnum);
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_ep0_enable(struct nbu2ss_udc *udc)
+{
+       _nbu2ss_bitset(&udc->p_regs->EP0_CONTROL, (EP0_AUTO | EP0_BCLR));
+       _nbu2ss_writel(&udc->p_regs->EP0_INT_ENA, EP0_INT_EN_BIT);
+
+       return;
+}
+
+#if 0
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_ep0_disable(struct nbu2ss_udc *udc)
+{
+       _nbu2ss_bitclr(&udc->p_regs->EP0_INT_ENA, EP0_INT_EN_BIT);
+
+       _nbu2ss_bitset(&udc->p_regs->EP0_CONTROL
+                       , (EP0_BCLR | EP0_INAK | EP0_ONAK | EP0_BCLR));
+
+       _nbu2ss_bitclr(&udc->p_regs->EP0_CONTROL, EP0_AUTO);
+
+       return;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
+                       struct nbu2ss_ep *ep,
+                       int status)
+{
+       struct nbu2ss_req *req;
+
+       /* Endpoint Disable */
+       _nbu2ss_epn_exit(udc, ep);
+
+       /* DMA Disable */
+       _nbu2ss_ep_dma_exit(udc, ep);
+
+       if (list_empty(&ep->queue))
+               return 0;
+
+       /* called with irqs blocked */
+       while (!list_empty(&ep->queue)) {
+               req = list_entry(ep->queue.next, struct nbu2ss_req, queue);
+               _nbu2ss_ep_done(ep, req, status);
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_quiesce(struct nbu2ss_udc *udc)
+{
+       struct nbu2ss_ep        *ep;
+
+       udc->gadget.speed = USB_SPEED_UNKNOWN;
+
+       _nbu2ss_nuke(udc, &udc->ep[0], -ESHUTDOWN);
+
+       /* Endpoint n */
+       list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+               _nbu2ss_nuke(udc, ep, -ESHUTDOWN);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_pullup(struct nbu2ss_udc *udc, int is_on)
+{
+       u32     reg_dt;
+
+       if (!udc) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       if (udc->vbus_active == 0)
+               return -ESHUTDOWN;
+
+       if (is_on) {
+               /* D+ Pullup */
+/*             INFO(" --- D+ Pullup\n"); */
+
+               if (udc->driver) {
+                       reg_dt = (_nbu2ss_readl(&udc->p_regs->USB_CONTROL)
+                               | PUE2) & ~(u32)CONNECTB;
+
+                       _nbu2ss_writel(&udc->p_regs->USB_CONTROL, reg_dt);
+               }
+
+       } else {
+               /* D+ Pulldown */
+/*             INFO(" --- D+ Pulldown\n"); */
+
+               reg_dt = (_nbu2ss_readl(&udc->p_regs->USB_CONTROL) | CONNECTB)
+                       & ~(u32)PUE2;
+
+               _nbu2ss_writel(&udc->p_regs->USB_CONTROL, reg_dt);
+               udc->gadget.speed = USB_SPEED_UNKNOWN;
+       }
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_fifo_flush(struct nbu2ss_udc *udc, struct nbu2ss_ep *ep)
+{
+       PT_FC_REGS      p = udc->p_regs;
+
+       if (udc->vbus_active == 0)
+               return;
+
+       if (ep->epnum == 0) {
+               /* EP0 */
+               _nbu2ss_bitset(&p->EP0_CONTROL, EP0_BCLR);
+
+       } else {
+               /* EPn */
+               _nbu2ss_ep_dma_abort(udc, ep);
+               _nbu2ss_bitset(&p->EP_REGS[ep->epnum - 1].EP_CONTROL, EPn_BCLR);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static int _nbu2ss_enable_controller(struct nbu2ss_udc *udc)
+{
+       int     waitcnt = 0;
+
+       if (udc->udc_enabled)
+               return 0;
+
+#if 0
+       emxx_open_clockgate(EMXX_CLK_USB1);
+       /* emxx_clkctrl_off(EMXX_CLKCTRL_USB1); */
+       /* emxx_clkctrl_on(EMXX_CLKCTRL_USB1); */
+       emxx_unreset_device(EMXX_RST_USB1);
+#endif
+       /*
+               Reset
+       */
+       _nbu2ss_bitset(&udc->p_regs->EPCTR, (DIRPD | EPC_RST));
+       udelay(EPC_RST_DISABLE_TIME);   /* 1us wait */
+
+       _nbu2ss_bitclr(&udc->p_regs->EPCTR, DIRPD);
+       mdelay(EPC_DIRPD_DISABLE_TIME); /* 1ms wait */
+
+       _nbu2ss_bitclr(&udc->p_regs->EPCTR, EPC_RST);
+
+       _nbu2ss_writel(&udc->p_regs->AHBSCTR, WAIT_MODE);
+
+#if 0
+       /* DMA Mode Setting */
+       if ((system_rev & EMXX_REV_MASK) == EMXX_REV_ES1) {
+               _nbu2ss_bitset(&udc->p_regs->AHBMCTR, BURST_TYPE);
+               _nbu2ss_bitclr(&udc->p_regs->AHBMCTR, HTRANS_MODE);
+       } else
+#endif
+               _nbu2ss_writel(&udc->p_regs->AHBMCTR,
+                       HBUSREQ_MODE | HTRANS_MODE | WBURST_TYPE);
+
+       while (!(_nbu2ss_readl(&udc->p_regs->EPCTR) & PLL_LOCK)) {
+               waitcnt++;
+               udelay(1);      /* 1us wait */
+               if (waitcnt == EPC_PLL_LOCK_COUNT) {
+                       ERR("*** Reset Cancel failed\n");
+                       return -EINVAL;
+               }
+       };
+
+#if 0
+       if ((system_rev & EMXX_REV_MASK) < EMXX_REV_ES3)
+#endif
+               _nbu2ss_bitset(&udc->p_regs->UTMI_CHARACTER_1, USB_SQUSET);
+
+       _nbu2ss_bitset(&udc->p_regs->USB_CONTROL, (INT_SEL | SOF_RCV));
+
+       /* EP0 */
+       _nbu2ss_ep0_enable(udc);
+
+       /* USB Interrupt Enable */
+       _nbu2ss_bitset(&udc->p_regs->USB_INT_ENA, USB_INT_EN_BIT);
+
+       udc->udc_enabled = TRUE;
+
+       return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_reset_controller(struct nbu2ss_udc *udc)
+{
+       _nbu2ss_bitset(&udc->p_regs->EPCTR, EPC_RST);
+       _nbu2ss_bitclr(&udc->p_regs->EPCTR, EPC_RST);
+}
+
+/*-------------------------------------------------------------------------*/
+static void _nbu2ss_disable_controller(struct nbu2ss_udc *udc)
+{
+       if (udc->udc_enabled) {
+               udc->udc_enabled = FALSE;
+               _nbu2ss_reset_controller(udc);
+               _nbu2ss_bitset(&udc->p_regs->EPCTR, (DIRPD | EPC_RST));
+       }
+#if 0
+       emxx_reset_device(EMXX_RST_USB1);
+       /* emxx_clkctrl_on(EMXX_CLKCTRL_USB1); */
+       emxx_close_clockgate(EMXX_CLK_USB1);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_check_vbus(struct nbu2ss_udc *udc)
+{
+       int     nret;
+       u32     reg_dt;
+
+       /* chattering */
+       mdelay(VBUS_CHATTERING_MDELAY);         /* wait (ms) */
+
+       /* VBUS ON Check*/
+       reg_dt = gpio_get_value(VBUS_VALUE);
+       if (reg_dt == 0) {
+
+               udc->linux_suspended = 0;
+
+               _nbu2ss_reset_controller(udc);
+               pr_info(" ----- VBUS OFF\n");
+
+               if (udc->vbus_active == 1) {
+                       /* VBUS OFF */
+                       udc->vbus_active = 0;
+                       if (udc->usb_suspended) {
+                               udc->usb_suspended = 0;
+                               /* _nbu2ss_reset_controller(udc); */
+                       }
+                       udc->devstate = USB_STATE_NOTATTACHED;
+
+                       _nbu2ss_quiesce(udc);
+                       if (udc->driver) {
+                               spin_unlock(&udc->lock);
+                               udc->driver->disconnect(&udc->gadget);
+                               spin_lock(&udc->lock);
+                       }
+
+                       _nbu2ss_disable_controller(udc);
+               }
+       } else {
+               mdelay(5);              /* wait (5ms) */
+               reg_dt = gpio_get_value(VBUS_VALUE);
+               if (reg_dt == 0)
+                       return;
+
+               pr_info(" ----- VBUS ON\n");
+
+               if (udc->linux_suspended)
+                       return;
+
+               if (udc->vbus_active == 0) {
+                       /* VBUS ON */
+                       udc->vbus_active = 1;
+                       udc->devstate = USB_STATE_POWERED;
+
+                       nret = _nbu2ss_enable_controller(udc);
+                       if (nret < 0) {
+                               _nbu2ss_disable_controller(udc);
+                               udc->vbus_active = 0;
+                               return;
+                       }
+
+                       _nbu2ss_pullup(udc, 1);
+
+#ifdef UDC_DEBUG_DUMP
+                       _nbu2ss_dump_register(udc);
+#endif /* UDC_DEBUG_DUMP */
+
+               } else {
+                       if (udc->devstate == USB_STATE_POWERED)
+                               _nbu2ss_pullup(udc, 1);
+               }
+       }
+
+       return;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_int_bus_reset(struct nbu2ss_udc *udc)
+{
+       udc->devstate           = USB_STATE_DEFAULT;
+       udc->remote_wakeup      = 0;
+
+       _nbu2ss_quiesce(udc);
+
+       udc->ep0state = EP0_IDLE;
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_int_usb_resume(struct nbu2ss_udc *udc)
+{
+       if (udc->usb_suspended == 1) {
+               udc->usb_suspended = 0;
+               if (udc->driver && udc->driver->resume) {
+                       spin_unlock(&udc->lock);
+                       udc->driver->resume(&udc->gadget);
+                       spin_lock(&udc->lock);
+               }
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static inline void _nbu2ss_int_usb_suspend(struct nbu2ss_udc *udc)
+{
+       u32     reg_dt;
+
+       if (udc->usb_suspended == 0) {
+               reg_dt = gpio_get_value(VBUS_VALUE);
+
+               if (reg_dt == 0)
+                       return;
+
+               udc->usb_suspended = 1;
+               if (udc->driver && udc->driver->suspend) {
+                       spin_unlock(&udc->lock);
+                       udc->driver->suspend(&udc->gadget);
+                       spin_lock(&udc->lock);
+               }
+
+               _nbu2ss_bitset(&udc->p_regs->USB_CONTROL, SUSPEND);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+/* VBUS (GPIO153) Interrupt */
+static irqreturn_t _nbu2ss_vbus_irq(int irq, void *_udc)
+{
+       struct nbu2ss_udc       *udc = (struct nbu2ss_udc *)_udc;
+
+       spin_lock(&udc->lock);
+       _nbu2ss_check_vbus(udc);
+       spin_unlock(&udc->lock);
+
+       return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+/* Interrupt (udc) */
+static irqreturn_t _nbu2ss_udc_irq(int irq, void *_udc)
+{
+       u8      suspend_flag = 0;
+       u32     status;
+       u32     epnum, int_bit;
+
+       struct nbu2ss_udc       *udc = (struct nbu2ss_udc *)_udc;
+       PT_FC_REGS              preg = udc->p_regs;
+
+       if (gpio_get_value(VBUS_VALUE) == 0) {
+               _nbu2ss_writel(&preg->USB_INT_STA, ~USB_INT_STA_RW);
+               _nbu2ss_writel(&preg->USB_INT_ENA, 0);
+               return IRQ_HANDLED;
+       }
+
+       spin_lock(&udc->lock);
+
+       for (;;) {
+               if (gpio_get_value(VBUS_VALUE) == 0) {
+                       _nbu2ss_writel(&preg->USB_INT_STA, ~USB_INT_STA_RW);
+                       _nbu2ss_writel(&preg->USB_INT_ENA, 0);
+                       status = 0;
+               } else
+                       status = _nbu2ss_readl(&preg->USB_INT_STA);
+
+               if (status == 0)
+                       break;
+
+               _nbu2ss_writel(&preg->USB_INT_STA, ~(status & USB_INT_STA_RW));
+
+               if (status & USB_RST_INT) {
+                       /* USB Reset */
+                       _nbu2ss_int_bus_reset(udc);
+               }
+
+               if (status & RSUM_INT) {
+                       /* Resume */
+                       _nbu2ss_int_usb_resume(udc);
+               }
+
+               if (status & SPND_INT) {
+                       /* Suspend */
+                       suspend_flag = 1;
+               }
+
+               if (status & EPn_INT) {
+                       /* EP INT */
+                       int_bit = status >> 8;
+
+                       for (epnum = 0; epnum < NUM_ENDPOINTS; epnum++) {
+
+                               if (0x01 & int_bit)
+                                       _nbu2ss_ep_int(udc, epnum);
+
+                               int_bit >>= 1;
+
+                               if (int_bit == 0)
+                                       break;
+                       }
+               }
+       }
+
+       if (suspend_flag)
+               _nbu2ss_int_usb_suspend(udc);
+
+       spin_unlock(&udc->lock);
+
+       return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+/* usb_ep_ops */
+static int nbu2ss_ep_enable(
+       struct usb_ep *_ep,
+       const struct usb_endpoint_descriptor *desc)
+{
+       u8              ep_type;
+       unsigned long   flags;
+
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+
+       if ((_ep == NULL) || (desc == NULL)) {
+               ERR(" *** %s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       if ((ep == NULL) || (ep->udc == NULL)) {
+               ERR(" *** %s, ep == NULL !!\n", __func__);
+               return -EINVAL;
+       }
+
+       ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+       if ((ep_type == USB_ENDPOINT_XFER_CONTROL)
+               || (ep_type == USB_ENDPOINT_XFER_ISOC)) {
+
+               ERR(" *** %s, bat bmAttributes\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = ep->udc;
+       if (udc->vbus_active == 0)
+               return -ESHUTDOWN;
+
+       if ((udc->driver == NULL)
+               || (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
+
+               ERR(" *** %s, udc !!\n", __func__);
+               return -ESHUTDOWN;
+       }
+
+       spin_lock_irqsave(&udc->lock, flags);
+
+       ep->desc = desc;
+       ep->epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+       ep->direct = desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+       ep->ep_type = ep_type;
+       ep->wedged = 0;
+       ep->halted = FALSE;
+       ep->stalled = FALSE;
+
+       ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+       /* DMA setting */
+       _nbu2ss_ep_dma_init(udc, ep);
+
+       /* Endpoint setting */
+       _nbu2ss_ep_init(udc, ep);
+
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_disable(struct usb_ep *_ep)
+{
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+
+       if (_ep == NULL) {
+               ERR(" *** %s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       if ((ep == NULL) || (ep->udc == NULL)) {
+               ERR(" *** %s, ep == NULL !!\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = ep->udc;
+       if (udc->vbus_active == 0)
+               return -ESHUTDOWN;
+
+       spin_lock_irqsave(&udc->lock, flags);
+       _nbu2ss_nuke(udc, ep, -EINPROGRESS);            /* dequeue request */
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static struct usb_request *nbu2ss_ep_alloc_request(
+       struct usb_ep *ep,
+       gfp_t gfp_flags)
+{
+       struct nbu2ss_req *req;
+
+       req = kzalloc(sizeof(*req), gfp_flags);
+       if (!req)
+               return 0;
+
+#ifdef USE_DMA
+       req->req.dma = DMA_ADDR_INVALID;
+#endif
+       INIT_LIST_HEAD(&req->queue);
+
+       return &req->req;
+}
+
+/*-------------------------------------------------------------------------*/
+static void nbu2ss_ep_free_request(
+       struct usb_ep *_ep,
+       struct usb_request *_req)
+{
+       struct nbu2ss_req *req;
+
+       if (_req != NULL) {
+               req = container_of(_req, struct nbu2ss_req, req);
+
+               if (req != NULL)
+                       kfree(req);
+       }
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_queue(
+       struct usb_ep *_ep,
+       struct usb_request *_req,
+       gfp_t gfp_flags)
+{
+       struct nbu2ss_req       *req;
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+       bool                    bflag;
+       int                     result = -EINVAL;
+
+       /* catch various bogus parameters */
+       if ((_ep == NULL) || (_req == NULL)) {
+               if (_ep == NULL)
+                       ERR("*** %s --- _ep == NULL\n", __func__);
+
+               if (_req == NULL)
+                       ERR("*** %s --- _req == NULL\n", __func__);
+
+               return -EINVAL;
+       }
+
+       req = container_of(_req, struct nbu2ss_req, req);
+       if (unlikely
+           (!_req->complete || !_req->buf
+            || !list_empty(&req->queue))) {
+
+               if (!_req->complete)
+                       ERR("*** %s --- !_req->complete\n", __func__);
+
+               if (!_req->buf)
+                       ERR("*** %s --- !_req->buf\n", __func__);
+
+               if (!list_empty(&req->queue))
+                       ERR("*** %s --- !list_empty(&req->queue)\n", __func__);
+
+               return -EINVAL;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       udc = ep->udc;
+
+/*     INFO("=== %s(ep%d), zero=%d\n", __func__, ep->epnum, _req->zero); */
+
+       if (udc->vbus_active == 0) {
+               pr_info("Can't ep_queue (VBUS OFF)\n");
+               return -ESHUTDOWN;
+       }
+
+       if (unlikely(!udc->driver)) {
+               ERR("%s, bogus device state %p\n", __func__, udc->driver);
+               return -ESHUTDOWN;
+       }
+
+       spin_lock_irqsave(&udc->lock, flags);
+
+#ifdef USE_DMA
+       if ((u32)req->req.buf & 0x3)
+               req->unaligned = TRUE;
+       else
+               req->unaligned = FALSE;
+
+       if (req->unaligned) {
+               if (ep->virt_buf == NULL)
+                       ep->virt_buf = (u8 *)dma_alloc_coherent(
+                               NULL, PAGE_SIZE,
+                               &ep->phys_buf, GFP_KERNEL | GFP_DMA);
+               if (ep->epnum > 0)  {
+                       if (ep->direct == USB_DIR_IN)
+                               memcpy(ep->virt_buf, req->req.buf,
+                                       req->req.length);
+               }
+       }
+
+       if ((ep->epnum > 0) && (ep->direct == USB_DIR_OUT) &&
+                       (req->req.dma != 0))
+               _nbu2ss_dma_map_single(udc, ep, req, USB_DIR_OUT);
+#endif
+
+       _req->status = -EINPROGRESS;
+       _req->actual = 0;
+
+       bflag = list_empty(&ep->queue);
+       list_add_tail(&req->queue, &ep->queue);
+
+       if ((bflag != FALSE) && (ep->stalled == FALSE)) {
+
+               result = _nbu2ss_start_transfer(udc, ep, req, FALSE);
+               if (result < 0) {
+                       ERR(" *** %s, result = %d\n", __func__, result);
+                       list_del(&req->queue);
+               } else if ((ep->epnum > 0) && (ep->direct == USB_DIR_OUT)) {
+#ifdef USE_DMA
+                       if (req->req.length < 4 &&
+                               req->req.length == req->req.actual)
+#else
+                       if (req->req.length == req->req.actual)
+#endif
+                               _nbu2ss_ep_done(ep, req, result);
+               }
+       }
+
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_dequeue(
+       struct usb_ep *_ep,
+       struct usb_request *_req)
+{
+       struct nbu2ss_req       *req;
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+       unsigned long flags;
+
+       /*INFO("=== %s()\n", __func__);*/
+
+       /* catch various bogus parameters */
+       if ((_ep == NULL) || (_req == NULL)) {
+               /* ERR("%s, bad param(1)\n", __func__); */
+               return -EINVAL;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       if (!ep) {
+               ERR("%s, ep == NULL !!\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = ep->udc;
+       if (udc == NULL)
+               return -EINVAL;
+
+       spin_lock_irqsave(&udc->lock, flags);
+
+       /* make sure it's actually queued on this endpoint */
+       list_for_each_entry(req, &ep->queue, queue) {
+               if (&req->req == _req)
+                       break;
+       }
+       if (&req->req != _req) {
+               spin_unlock_irqrestore(&udc->lock, flags);
+               pr_debug("%s no queue(EINVAL)\n", __func__);
+               return -EINVAL;
+       }
+
+       _nbu2ss_ep_done(ep, req, -ECONNRESET);
+
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_set_halt(struct usb_ep *_ep, int value)
+{
+       u8              ep_adrs;
+       unsigned long   flags;
+
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (!_ep) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       if (!ep) {
+               ERR("%s, bad ep\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = ep->udc;
+       if (!udc) {
+               ERR(" *** %s, bad udc\n", __func__);
+               return -EINVAL;
+       }
+
+       spin_lock_irqsave(&udc->lock, flags);
+
+       ep_adrs = ep->epnum | ep->direct;
+       if (value == 0) {
+               _nbu2ss_set_endpoint_stall(udc, ep_adrs, value);
+               ep->stalled = FALSE;
+       } else {
+               if (list_empty(&ep->queue))
+                       _nbu2ss_epn_set_stall(udc, ep);
+               else
+                       ep->stalled = TRUE;
+       }
+
+       if (value == 0)
+               ep->wedged = 0;
+
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+static int nbu2ss_ep_set_wedge(struct usb_ep *_ep)
+{
+       return nbu2ss_ep_set_halt(_ep, 1);
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_ep_fifo_status(struct usb_ep *_ep)
+{
+       u32             data;
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+       PT_FC_REGS              preg;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (!_ep) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       if (!ep) {
+               ERR("%s, bad ep\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = ep->udc;
+       if (!udc) {
+               ERR("%s, bad udc\n", __func__);
+               return -EINVAL;
+       }
+
+       preg = udc->p_regs;
+
+       data = gpio_get_value(VBUS_VALUE);
+       if (data == 0)
+               return -EINVAL;
+
+       spin_lock_irqsave(&udc->lock, flags);
+
+       if (ep->epnum == 0) {
+               data = _nbu2ss_readl(&preg->EP0_LENGTH) & EP0_LDATA;
+
+       } else {
+               data = _nbu2ss_readl(&preg->EP_REGS[ep->epnum-1].EP_LEN_DCNT)
+                       & EPn_LDATA;
+       }
+
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static void  nbu2ss_ep_fifo_flush(struct usb_ep *_ep)
+{
+       u32                     data;
+       struct nbu2ss_ep        *ep;
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (!_ep) {
+               ERR("%s, bad param\n", __func__);
+               return;
+       }
+
+       ep = container_of(_ep, struct nbu2ss_ep, ep);
+       if (!_ep) {
+               ERR("%s, bad ep\n", __func__);
+               return;
+       }
+
+       udc = ep->udc;
+       if (!udc) {
+               ERR("%s, bad udc\n", __func__);
+               return;
+       }
+
+       data = gpio_get_value(VBUS_VALUE);
+       if (data == 0)
+               return;
+
+       spin_lock_irqsave(&udc->lock, flags);
+       _nbu2ss_fifo_flush(udc, ep);
+       spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+static struct usb_ep_ops nbu2ss_ep_ops = {
+       .enable         = nbu2ss_ep_enable,
+       .disable        = nbu2ss_ep_disable,
+
+       .alloc_request  = nbu2ss_ep_alloc_request,
+       .free_request   = nbu2ss_ep_free_request,
+
+       .queue          = nbu2ss_ep_queue,
+       .dequeue        = nbu2ss_ep_dequeue,
+
+       .set_halt       = nbu2ss_ep_set_halt,
+       .set_wedge      = nbu2ss_ep_set_wedge,
+
+       .fifo_status    = nbu2ss_ep_fifo_status,
+       .fifo_flush     = nbu2ss_ep_fifo_flush,
+};
+
+
+/*-------------------------------------------------------------------------*/
+/* usb_gadget_ops */
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_get_frame(struct usb_gadget *pgadget)
+{
+       u32                     data;
+       struct nbu2ss_udc       *udc;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (pgadget == NULL) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+       if (udc == NULL) {
+               ERR("%s, udc == NULL\n", __func__);
+               return -EINVAL;
+       }
+
+       data = gpio_get_value(VBUS_VALUE);
+       if (data == 0)
+               return -EINVAL;
+
+       data = _nbu2ss_readl(&udc->p_regs->USB_ADDRESS) & FRAME;
+
+       return data;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_wakeup(struct usb_gadget *pgadget)
+{
+       int     i;
+       u32     data;
+
+       struct nbu2ss_udc       *udc;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (pgadget == NULL) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+       if (udc == NULL) {
+               ERR("%s, udc == NULL\n", __func__);
+               return -EINVAL;
+       }
+
+       data = gpio_get_value(VBUS_VALUE);
+       if (data == 0) {
+               pr_warning("VBUS LEVEL = %d\n", data);
+               return -EINVAL;
+       }
+
+       _nbu2ss_bitset(&udc->p_regs->EPCTR, PLL_RESUME);
+
+       for (i = 0; i < EPC_PLL_LOCK_COUNT; i++) {
+               data = _nbu2ss_readl(&udc->p_regs->EPCTR);
+
+               if (data & PLL_LOCK)
+                       break;
+       }
+
+       _nbu2ss_bitclr(&udc->p_regs->EPCTR, PLL_RESUME);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_set_selfpowered(struct usb_gadget *pgadget,
+                                       int is_selfpowered)
+{
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (pgadget == NULL) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+
+       spin_lock_irqsave(&udc->lock, flags);
+       udc->self_powered = (is_selfpowered != 0);
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_vbus_session(struct usb_gadget *pgadget, int is_active)
+{
+/*     INFO("=== %s()\n", __func__); */
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_vbus_draw(struct usb_gadget *pgadget, unsigned mA)
+{
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (pgadget == NULL) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+
+       spin_lock_irqsave(&udc->lock, flags);
+       udc->mA = mA;
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_pullup(struct usb_gadget *pgadget, int is_on)
+{
+       struct nbu2ss_udc       *udc;
+       unsigned long           flags;
+
+/*     INFO("=== %s()\n", __func__); */
+
+       if (pgadget == NULL) {
+               ERR("%s, bad param\n", __func__);
+               return -EINVAL;
+       }
+
+       udc = container_of(pgadget, struct nbu2ss_udc, gadget);
+
+       if (udc->driver == NULL) {
+               pr_warning("%s, Not Regist Driver\n", __func__);
+               return -EINVAL;
+       }
+
+       if (udc->vbus_active == 0)
+               return -ESHUTDOWN;
+
+       spin_lock_irqsave(&udc->lock, flags);
+       _nbu2ss_pullup(udc, is_on);
+       spin_unlock_irqrestore(&udc->lock, flags);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_gad_ioctl(
+       struct usb_gadget *pgadget,
+       unsigned code,
+       unsigned long param)
+{
+/*     INFO("=== %s()\n", __func__); */
+       return 0;
+}
+
+
+static const struct usb_gadget_ops nbu2ss_gadget_ops = {
+       .get_frame              = nbu2ss_gad_get_frame,
+       .wakeup                 = nbu2ss_gad_wakeup,
+       .set_selfpowered        = nbu2ss_gad_set_selfpowered,
+       .vbus_session           = nbu2ss_gad_vbus_session,
+       .vbus_draw              = nbu2ss_gad_vbus_draw,
+       .pullup                 = nbu2ss_gad_pullup,
+       .ioctl                  = nbu2ss_gad_ioctl,
+};
+
+static char g_ep0_name[] = "ep0";
+static char g_ep1_name[] = "ep1-bulk";
+static char g_ep2_name[] = "ep2-bulk";
+static char g_ep3_name[] = "ep3in-int";
+static char g_ep4_name[] = "ep4-iso";
+static char g_ep5_name[] = "ep5-iso";
+static char g_ep6_name[] = "ep6-bulk";
+static char g_ep7_name[] = "ep7-bulk";
+static char g_ep8_name[] = "ep8in-int";
+static char g_ep9_name[] = "ep9-iso";
+static char g_epa_name[] = "epa-iso";
+static char g_epb_name[] = "epb-bulk";
+static char g_epc_name[] = "epc-nulk";
+static char g_epd_name[] = "epdin-int";
+
+static char *gp_ep_name[NUM_ENDPOINTS] = {
+       g_ep0_name,
+       g_ep1_name,
+       g_ep2_name,
+       g_ep3_name,
+       g_ep4_name,
+       g_ep5_name,
+       g_ep6_name,
+       g_ep7_name,
+       g_ep8_name,
+       g_ep9_name,
+       g_epa_name,
+       g_epb_name,
+       g_epc_name,
+       g_epd_name,
+};
+
+/*-------------------------------------------------------------------------*/
+static void __init nbu2ss_drv_set_ep_info(
+       struct nbu2ss_udc       *udc,
+       struct nbu2ss_ep        *ep,
+       u8 *name)
+{
+       ep->udc = udc;
+       ep->desc = NULL;
+
+       ep->ep.driver_data = NULL;
+       ep->ep.name = name;
+       ep->ep.ops = &nbu2ss_ep_ops;
+
+       if (isdigit(name[2])) {
+
+               long    num;
+               int     res;
+               char    tempbuf[2];
+
+               tempbuf[0] = name[2];
+               tempbuf[1] = '\0';
+               res = strict_strtol(tempbuf, 16, &num);
+
+               if (num == 0)
+                       ep->ep.maxpacket = EP0_PACKETSIZE;
+               else
+                       ep->ep.maxpacket = EP_PACKETSIZE;
+
+       } else {
+               ep->ep.maxpacket = EP_PACKETSIZE;
+       }
+
+       list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+       INIT_LIST_HEAD(&ep->queue);
+}
+
+/*-------------------------------------------------------------------------*/
+static void __init nbu2ss_drv_ep_init(struct nbu2ss_udc *udc)
+{
+       int     i;
+
+       INIT_LIST_HEAD(&udc->gadget.ep_list);
+       udc->gadget.ep0 = &udc->ep[0].ep;
+
+
+       for (i = 0; i < NUM_ENDPOINTS; i++)
+               nbu2ss_drv_set_ep_info(udc, &udc->ep[i], gp_ep_name[i]);
+
+       list_del_init(&udc->ep[0].ep.ep_list);
+}
+
+/*-------------------------------------------------------------------------*/
+/* platform_driver */
+static int __init nbu2ss_drv_contest_init(
+       struct platform_device *pdev,
+       struct nbu2ss_udc *udc)
+{
+       spin_lock_init(&udc->lock);
+       udc->dev = &pdev->dev;
+
+       udc->self_powered = 1;
+       udc->devstate = USB_STATE_NOTATTACHED;
+       udc->pdev = pdev;
+       udc->mA = 0;
+
+       udc->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+       /* init Endpoint */
+       nbu2ss_drv_ep_init(udc);
+
+       /* init Gadget */
+       udc->gadget.ops = &nbu2ss_gadget_ops;
+       udc->gadget.ep0 = &udc->ep[0].ep;
+       udc->gadget.speed = USB_SPEED_UNKNOWN;
+       udc->gadget.name = driver_name;
+       //udc->gadget.is_dualspeed = 1;
+
+       device_initialize(&udc->gadget.dev);
+
+       dev_set_name(&udc->gadget.dev, "gadget");
+       udc->gadget.dev.parent = &pdev->dev;
+       udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+
+       return 0;
+}
+
+/*
+ *     probe - binds to the platform device
+ */
+static int nbu2ss_drv_probe(struct platform_device *pdev)
+{
+       int     status = -ENODEV;
+       struct nbu2ss_udc       *udc;
+
+       udc = &udc_controller;
+       memset(udc, 0, sizeof(struct nbu2ss_udc));
+
+       platform_set_drvdata(pdev, udc);
+
+       /* IO Memory Region */
+       if (!request_mem_region(USB_BASE_ADDRESS, USB_BASE_SIZE
+                               , driver_name)) {
+
+               ERR("request_mem_region failed\n");
+               return -EBUSY;
+       }
+
+       /* IO Memory */
+       udc->p_regs = (PT_FC_REGS)ioremap(USB_BASE_ADDRESS, USB_BASE_SIZE);
+       if (!udc->p_regs) {
+               ERR("request_io_mem failed\n");
+               goto cleanup3;
+       }
+
+       /* USB Function Controller Interrupt */
+       status = request_irq(USB_UDC_IRQ_1,
+                               _nbu2ss_udc_irq,
+                               IRQF_DISABLED,
+                               driver_name,
+                               udc);
+
+       if (status != 0) {
+               ERR("request_irq(USB_UDC_IRQ_1) failed\n");
+               goto cleanup2;
+       }
+
+       /* Driver Initialization */
+       status = nbu2ss_drv_contest_init(pdev, udc);
+       if (status < 0) {
+               /* Error */
+               goto cleanup1;
+       }
+
+       /* VBUS Interrupt */
+       irq_set_irq_type(INT_VBUS, IRQ_TYPE_EDGE_BOTH);
+       status = request_irq(INT_VBUS,
+                               _nbu2ss_vbus_irq,
+                               IRQF_SHARED,
+                               driver_name,
+                               udc);
+
+       if (status != 0) {
+               ERR("request_irq(INT_VBUS) failed\n");
+               goto cleanup1;
+       }
+
+       return status;
+
+cleanup1:
+       /* Interrupt Handler - Release */
+       free_irq(USB_UDC_IRQ_1, udc);
+
+cleanup2:
+       /* IO Memory - Release */
+       if (udc->p_regs)
+               iounmap(udc->p_regs);
+
+cleanup3:
+       /* IO Memory Region - Release */
+       release_mem_region(USB_BASE_ADDRESS, USB_BASE_SIZE);
+
+       return status;
+}
+
+/*-------------------------------------------------------------------------*/
+static void nbu2ss_drv_shutdown(struct platform_device *pdev)
+{
+       struct nbu2ss_udc       *udc;
+
+       udc = platform_get_drvdata(pdev);
+       if (udc == NULL)
+               return;
+
+       _nbu2ss_disable_controller(udc);
+}
+
+/*-------------------------------------------------------------------------*/
+static int __exit nbu2ss_drv_remove(struct platform_device *pdev)
+{
+       struct nbu2ss_udc       *udc;
+       struct nbu2ss_ep        *ep;
+       int     i;
+
+       udc = &udc_controller;
+
+       for (i = 0; i < NUM_ENDPOINTS; i++) {
+               ep = &udc->ep[i];
+               if (ep->virt_buf)
+                       dma_free_coherent(NULL, PAGE_SIZE,
+                               (void *)ep->virt_buf, ep->phys_buf);
+       }
+
+       /* Interrupt Handler - Release */
+       free_irq(USB_UDC_IRQ_1, udc);
+
+       /* Interrupt Handler - Release */
+       free_irq(INT_VBUS, udc);
+
+       /* IO Memory - Release */
+       if (udc->p_regs)
+               iounmap(udc->p_regs);
+
+       /* IO Memory Region - Release */
+       release_mem_region(USB_BASE_ADDRESS, USB_BASE_SIZE);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct nbu2ss_udc       *udc;
+
+       udc = platform_get_drvdata(pdev);
+       if (udc == NULL)
+               return 0;
+
+       if (udc->vbus_active) {
+               udc->vbus_active = 0;
+               udc->devstate = USB_STATE_NOTATTACHED;
+               udc->linux_suspended = 1;
+
+               if (udc->usb_suspended) {
+                       udc->usb_suspended = 0;
+                       _nbu2ss_reset_controller(udc);
+               }
+
+               _nbu2ss_quiesce(udc);
+       }
+       _nbu2ss_disable_controller(udc);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+static int nbu2ss_drv_resume(struct platform_device *pdev)
+{
+       u32     data;
+       struct nbu2ss_udc       *udc;
+
+       udc = platform_get_drvdata(pdev);
+       if (udc == NULL)
+               return 0;
+
+       data = gpio_get_value(VBUS_VALUE);
+       if (data) {
+               udc->vbus_active = 1;
+               udc->devstate = USB_STATE_POWERED;
+               _nbu2ss_enable_controller(udc);
+               _nbu2ss_pullup(udc, 1);
+       }
+
+       udc->linux_suspended = 0;
+
+       return 0;
+}
+
+
+static struct platform_driver udc_driver = {
+       .probe          = nbu2ss_drv_probe,
+       .shutdown       = nbu2ss_drv_shutdown,
+       .remove         = __exit_p(nbu2ss_drv_remove),
+       .suspend        = nbu2ss_drv_suspend,
+       .resume         = nbu2ss_drv_resume,
+       .driver         = {
+               .owner  = THIS_MODULE,
+               .name   = driver_name,
+       },
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+/* module */
+
+/*-------------------------------------------------------------------------*/
+static int __init udc_init(void)
+{
+       return platform_driver_register(&udc_driver);
+}
+module_init(udc_init);
+
+/*-------------------------------------------------------------------------*/
+static void __exit udc_exit(void)
+{
+       platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Renesas Electronics Corporation");
+MODULE_LICENSE("GPL");
+
+
diff --git a/drivers/staging/emxx_udc/emxx_udc.h b/drivers/staging/emxx_udc/emxx_udc.h
new file mode 100644 (file)
index 0000000..cc5a7d8
--- /dev/null
@@ -0,0 +1,662 @@
+/*
+ *  EMXX FCD (Function Controller Driver) for USB.
+ *
+ *  Copyright (C) 2010 Renesas Electronics Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software Foundation,
+ *  Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA.
+ */
+
+
+
+
+#ifndef _LINUX_EMXX_H
+#define _LINUX_EMXX_H
+
+
+
+/*---------------------------------------------------------------------------*/
+/*----------------- Default undef */
+#if 0
+#define DEBUG
+#define UDC_DEBUG_DUMP
+#endif
+
+/* #define USE_INT_COUNT_OVER */
+
+/*----------------- Default define */
+#define        USE_DMA 1
+#define USE_SUSPEND_WAIT       1
+
+
+
+#ifndef TRUE
+#define TRUE   1
+#define FALSE  0
+#endif
+
+
+/*------------ Board dependence(Resource) */
+#define USB_BASE_ADDRESS       EMXX_USBS1_BASE
+#define USB_BASE_SIZE          0x2000
+
+#define USB_UDC_IRQ_0          INT_USBF0
+#define USB_UDC_IRQ_1          INT_USBF1
+#define        VBUS_VALUE              GPIO_VBUS
+
+/* below hacked up for staging integration */
+#define GPIO_VBUS 0 /* GPIO_P153 on KZM9D */
+#define INT_VBUS 0 /* IRQ for GPIO_P153 */
+#define INT_USBF0 158
+#define INT_USBF1 159
+#define EMXX_USBS0_BASE 0xe2700000
+#define EMXX_USBS1_BASE 0xe2800000
+
+/*------------ Board dependence(Wait) */
+
+/* CHATTERING wait time ms */
+#define VBUS_CHATTERING_MDELAY         1
+/* DMA Abort wait time ms */
+#define DMA_DISABLE_TIME               10
+
+
+
+/*------------ Controller dependence */
+#define NUM_ENDPOINTS          14              /* Endpoint */
+#define REG_EP_NUM             15              /* Endpoint Register */
+#define DMA_MAX_COUNT          256             /* DMA Block */
+
+
+
+#define EPC_RST_DISABLE_TIME           1       /* 1 usec */
+#define EPC_DIRPD_DISABLE_TIME         1       /* 1 msec */
+#define EPC_PLL_LOCK_COUNT             1000    /* 1000 */
+#define IN_DATA_EMPTY_COUNT            1000    /* 1000 */
+
+#define CHATGER_TIME                   700     /* 700msec */
+#define USB_SUSPEND_TIME               2000    /* 2 sec */
+
+
+/* U2F FLAG */
+#define U2F_ENABLE             1
+#define U2F_DISABLE            0
+
+
+/*------- BIT */
+#define BIT00          0x00000001
+#define BIT01          0x00000002
+#define BIT02          0x00000004
+#define BIT03          0x00000008
+#define BIT04          0x00000010
+#define BIT05          0x00000020
+#define BIT06          0x00000040
+#define BIT07          0x00000080
+#define BIT08          0x00000100
+#define BIT09          0x00000200
+#define BIT10          0x00000400
+#define BIT11          0x00000800
+#define BIT12          0x00001000
+#define BIT13          0x00002000
+#define BIT14          0x00004000
+#define BIT15          0x00008000
+#define BIT16          0x00010000
+#define BIT17          0x00020000
+#define BIT18          0x00040000
+#define BIT19          0x00080000
+#define BIT20          0x00100000
+#define BIT21          0x00200000
+#define BIT22          0x00400000
+#define BIT23          0x00800000
+#define BIT24          0x01000000
+#define BIT25          0x02000000
+#define BIT26          0x04000000
+#define BIT27          0x08000000
+#define BIT28          0x10000000
+#define BIT29          0x20000000
+#define BIT30          0x40000000
+#define BIT31          0x80000000
+
+#if 0
+/*------- (0x0000) USB Control Register */
+#define USBTESTMODE                    (BIT18+BIT17+BIT16)
+#define TEST_J                         BIT16
+#define TEST_K                         BIT17
+#define TEST_SE0_NAK                   (BIT17+BIT16)
+#define TEST_PACKET                    BIT18
+#endif
+#define TEST_FORCE_ENABLE              (BIT18+BIT16)
+
+#define INT_SEL                                BIT10
+#define CONSTFS                                BIT09
+#define SOF_RCV                                BIT08
+#define RSUM_IN                                BIT07
+#define SUSPEND                                BIT06
+#define CONF                           BIT05
+#define DEFAULT                                BIT04
+#define CONNECTB                       BIT03
+#define PUE2                           BIT02
+
+#define MAX_TEST_MODE_NUM              0x05
+#define TEST_MODE_SHIFT                        16
+
+/*------- (0x0004) USB Status Register */
+#define SPEED_MODE                     BIT06
+#define HIGH_SPEED                     BIT06
+
+#define CONF                           BIT05
+#define DEFAULT                                BIT04
+#define USB_RST                                BIT03
+#define SPND_OUT                       BIT02
+#define RSUM_OUT                       BIT01
+
+/*------- (0x0008) USB Address Register */
+#define USB_ADDR                       0x007F0000
+#define SOF_STATUS                     BIT15
+#define UFRAME                         (BIT14+BIT13+BIT12)
+#define FRAME                          0x000007FF
+
+#define USB_ADRS_SHIFT                 16
+
+/*------- (0x000C) UTMI Characteristic 1 Register */
+#define SQUSET                         (BIT07+BIT06+BIT05+BIT04)
+
+#define USB_SQUSET                     (BIT06+BIT05+BIT04)
+
+/*------- (0x0010) TEST Control Register */
+#define FORCEHS                                BIT02
+#define CS_TESTMODEEN                  BIT01
+#define LOOPBACK                       BIT00
+
+/*------- (0x0018) Setup Data 0 Register */
+/*------- (0x001C) Setup Data 1 Register */
+
+/*------- (0x0020) USB Interrupt Status Register */
+#define EPn_INT                                0x00FFFF00
+#define EP15_INT                       BIT23
+#define EP14_INT                       BIT22
+#define EP13_INT                       BIT21
+#define EP12_INT                       BIT20
+#define EP11_INT                       BIT19
+#define EP10_INT                       BIT18
+#define EP9_INT                                BIT17
+#define EP8_INT                                BIT16
+#define EP7_INT                                BIT15
+#define EP6_INT                                BIT14
+#define EP5_INT                                BIT13
+#define EP4_INT                                BIT12
+#define EP3_INT                                BIT11
+#define EP2_INT                                BIT10
+#define EP1_INT                                BIT09
+#define EP0_INT                                BIT08
+#define SPEED_MODE_INT                 BIT06
+#define SOF_ERROR_INT                  BIT05
+#define SOF_INT                                BIT04
+#define USB_RST_INT                    BIT03
+#define SPND_INT                       BIT02
+#define RSUM_INT                       BIT01
+
+#define USB_INT_STA_RW                 0x7E
+
+/*------- (0x0024) USB Interrupt Enable Register */
+#define EP15_0_EN                      0x00FFFF00
+#define EP15_EN                                BIT23
+#define EP14_EN                                BIT22
+#define EP13_EN                                BIT21
+#define EP12_EN                                BIT20
+#define EP11_EN                                BIT19
+#define EP10_EN                                BIT18
+#define EP9_EN                         BIT17
+#define EP8_EN                         BIT16
+#define EP7_EN                         BIT15
+#define EP6_EN                         BIT14
+#define EP5_EN                         BIT13
+#define EP4_EN                         BIT12
+#define EP3_EN                         BIT11
+#define EP2_EN                         BIT10
+#define EP1_EN                         BIT09
+#define EP0_EN                         BIT08
+#define SPEED_MODE_EN                  BIT06
+#define SOF_ERROR_EN                   BIT05
+#define SOF_EN                         BIT04
+#define USB_RST_EN                     BIT03
+#define SPND_EN                                BIT02
+#define RSUM_EN                                BIT01
+
+#define USB_INT_EN_BIT \
+       (EP0_EN|SPEED_MODE_EN|USB_RST_EN|SPND_EN|RSUM_EN)
+
+/*------- (0x0028) EP0 Control Register */
+#define EP0_STGSEL                     BIT18
+#define EP0_OVERSEL                    BIT17
+#define EP0_AUTO                       BIT16
+#define EP0_PIDCLR                     BIT09
+#define EP0_BCLR                       BIT08
+#define EP0_DEND                       BIT07
+#define EP0_DW                         (BIT06+BIT05)
+#define EP0_DW4                                0
+#define EP0_DW3                                (BIT06+BIT05)
+#define EP0_DW2                                BIT06
+#define EP0_DW1                                BIT05
+
+#define EP0_INAK_EN                    BIT04
+#define EP0_PERR_NAK_CLR               BIT03
+#define EP0_STL                                BIT02
+#define EP0_INAK                       BIT01
+#define EP0_ONAK                       BIT00
+
+/*------- (0x002C) EP0 Status Register */
+#define EP0_PID                                BIT18
+#define EP0_PERR_NAK                   BIT17
+#define EP0_PERR_NAK_INT               BIT16
+#define EP0_OUT_NAK_INT                        BIT15
+#define EP0_OUT_NULL                   BIT14
+#define EP0_OUT_FULL                   BIT13
+#define EP0_OUT_EMPTY                  BIT12
+#define EP0_IN_NAK_INT                 BIT11
+#define EP0_IN_DATA                    BIT10
+#define EP0_IN_FULL                    BIT09
+#define EP0_IN_EMPTY                   BIT08
+#define EP0_OUT_NULL_INT               BIT07
+#define EP0_OUT_OR_INT                 BIT06
+#define EP0_OUT_INT                    BIT05
+#define EP0_IN_INT                     BIT04
+#define EP0_STALL_INT                  BIT03
+#define STG_END_INT                    BIT02
+#define STG_START_INT                  BIT01
+#define SETUP_INT                      BIT00
+
+#define EP0_STATUS_RW_BIT      (BIT16|BIT15|BIT11|0xFF)
+
+/*------- (0x0030) EP0 Interrupt Enable Register */
+#define EP0_PERR_NAK_EN                        BIT16
+#define EP0_OUT_NAK_EN                 BIT15
+
+#define EP0_IN_NAK_EN                  BIT11
+
+#define EP0_OUT_NULL_EN                        BIT07
+#define EP0_OUT_OR_EN                  BIT06
+#define EP0_OUT_EN                     BIT05
+#define EP0_IN_EN                      BIT04
+#define EP0_STALL_EN                   BIT03
+#define STG_END_EN                     BIT02
+#define STG_START_EN                   BIT01
+#define SETUP_EN                       BIT00
+
+#define EP0_INT_EN_BIT \
+       (EP0_OUT_OR_EN|EP0_OUT_EN|EP0_IN_EN|STG_END_EN|SETUP_EN)
+
+/*------- (0x0034) EP0 Length Register */
+#define EP0_LDATA                      0x0000007F
+
+/*------- (0x0038) EP0 Read Register */
+/*------- (0x003C) EP0 Write Register */
+
+/*------- (0x0040:) EPn Control Register */
+#define EPn_EN                         BIT31
+#define EPn_BUF_TYPE                   BIT30
+#define EPn_BUF_SINGLE                 BIT30
+
+#define EPn_DIR0                       BIT26
+#define EPn_MODE                       (BIT25+BIT24)
+#define EPn_BULK                       0
+#define EPn_INTERRUPT                  BIT24
+#define EPn_ISO                                BIT25
+
+#define EPn_OVERSEL                    BIT17
+#define EPn_AUTO                       BIT16
+
+#define EPn_IPIDCLR                    BIT11
+#define EPn_OPIDCLR                    BIT10
+#define EPn_BCLR                       BIT09
+#define EPn_CBCLR                      BIT08
+#define EPn_DEND                       BIT07
+#define EPn_DW                         (BIT06+BIT05)
+#define EPn_DW4                                0
+#define EPn_DW3                                (BIT06+BIT05)
+#define EPn_DW2                                BIT06
+#define EPn_DW1                                BIT05
+
+#define EPn_OSTL_EN                    BIT04
+#define EPn_ISTL                       BIT03
+#define EPn_OSTL                       BIT02
+
+#define EPn_ONAK                       BIT00
+
+/*------- (0x0044:) EPn Status Register        */
+#define EPn_ISO_PIDERR                 BIT29           /* R */
+#define EPn_OPID                       BIT28           /* R */
+#define EPn_OUT_NOTKN                  BIT27           /* R */
+#define EPn_ISO_OR                     BIT26           /* R */
+
+#define EPn_ISO_CRC                    BIT24           /* R */
+#define EPn_OUT_END_INT                        BIT23           /* RW */
+#define EPn_OUT_OR_INT                 BIT22           /* RW */
+#define EPn_OUT_NAK_ERR_INT            BIT21           /* RW */
+#define EPn_OUT_STALL_INT              BIT20           /* RW */
+#define EPn_OUT_INT                    BIT19           /* RW */
+#define EPn_OUT_NULL_INT               BIT18           /* RW */
+#define EPn_OUT_FULL                   BIT17           /* R */
+#define EPn_OUT_EMPTY                  BIT16           /* R */
+
+#define EPn_IPID                       BIT10           /* R */
+#define EPn_IN_NOTKN                   BIT09           /* R */
+#define EPn_ISO_UR                     BIT08           /* R */
+#define EPn_IN_END_INT                 BIT07           /* RW */
+
+#define EPn_IN_NAK_ERR_INT             BIT05           /* RW */
+#define EPn_IN_STALL_INT               BIT04           /* RW */
+#define EPn_IN_INT                     BIT03           /* RW */
+#define EPn_IN_DATA                    BIT02           /* R */
+#define EPn_IN_FULL                    BIT01           /* R */
+#define EPn_IN_EMPTY                   BIT00           /* R */
+
+#define EPn_INT_EN     \
+       (EPn_OUT_END_INT|EPn_OUT_INT|EPn_IN_END_INT|EPn_IN_INT)
+
+/*------- (0x0048:) EPn Interrupt Enable Register */
+#define EPn_OUT_END_EN                 BIT23           /* RW */
+#define EPn_OUT_OR_EN                  BIT22           /* RW */
+#define EPn_OUT_NAK_ERR_EN             BIT21           /* RW */
+#define EPn_OUT_STALL_EN               BIT20           /* RW */
+#define EPn_OUT_EN                     BIT19           /* RW */
+#define EPn_OUT_NULL_EN                        BIT18           /* RW */
+
+#define EPn_IN_END_EN                  BIT07           /* RW */
+
+#define EPn_IN_NAK_ERR_EN              BIT05           /* RW */
+#define EPn_IN_STALL_EN                        BIT04           /* RW */
+#define EPn_IN_EN                      BIT03           /* RW */
+
+/*------- (0x004C:) EPn Interrupt Enable Register */
+#define EPn_STOP_MODE                  BIT11
+#define EPn_DEND_SET                   BIT10
+#define EPn_BURST_SET                  BIT09
+#define EPn_STOP_SET                   BIT08
+
+#define EPn_DMA_EN                     BIT04
+
+#define EPn_DMAMODE0                   BIT00
+
+/*------- (0x0050:) EPn MaxPacket & BaseAddress Register */
+#define EPn_BASEAD                     0x1FFF0000
+#define EPn_MPKT                       0x000007FF
+
+/*------- (0x0054:) EPn Length & DMA Count Register */
+#define EPn_DMACNT                     0x01FF0000
+#define EPn_LDATA                      0x000007FF
+
+/*------- (0x0058:) EPn Read Register */
+/*------- (0x005C:) EPn Write Register */
+
+/*------- (0x1000) AHBSCTR Register */
+#define WAIT_MODE                      BIT00
+
+/*------- (0x1004) AHBMCTR Register */
+#define ARBITER_CTR                    BIT31           /* RW */
+#define MCYCLE_RST                     BIT12           /* RW */
+
+#define ENDIAN_CTR                     (BIT09+BIT08)   /* RW */
+#define ENDIAN_BYTE_SWAP               BIT09
+#define ENDIAN_HALF_WORD_SWAP          ENDIAN_CTR
+
+#define HBUSREQ_MODE                   BIT05           /* RW */
+#define HTRANS_MODE                    BIT04           /* RW */
+
+#define WBURST_TYPE                    BIT02           /* RW */
+#define BURST_TYPE                     (BIT01+BIT00)   /* RW */
+#define BURST_MAX_16                   0
+#define BURST_MAX_8                    BIT00
+#define BURST_MAX_4                    BIT01
+#define BURST_SINGLE                   BURST_TYPE
+
+/*------- (0x1008) AHBBINT Register */
+#define DMA_ENDINT                     0xFFFE0000      /* RW */
+
+#define AHB_VBUS_INT                   BIT13           /* RW */
+
+#define MBUS_ERRINT                    BIT06           /* RW */
+
+#define SBUS_ERRINT0                   BIT04           /* RW */
+#define ERR_MASTER                     0x0000000F      /* R */
+
+/*------- (0x100C) AHBBINTEN Register */
+#define DMA_ENDINTEN                   0xFFFE0000      /* RW */
+
+#define VBUS_INTEN                     BIT13           /* RW */
+
+#define MBUS_ERRINTEN                  BIT06           /* RW */
+
+#define SBUS_ERRINT0EN                 BIT04           /* RW */
+
+/*------- (0x1010) EPCTR Register */
+#define DIRPD                          BIT12           /* RW */
+
+#define VBUS_LEVEL                     BIT08           /* R */
+
+#define PLL_RESUME                     BIT05           /* RW */
+#define PLL_LOCK                       BIT04           /* R */
+
+#ifdef CONFIG_MACH_EMGR
+#define PLL_RST                                BIT02           /* RW */
+#endif
+
+#define EPC_RST                                BIT00           /* RW */
+
+/*------- (0x1014) USBF_EPTEST Register */
+#define LINESTATE                      (BIT09+BIT08)   /* R */
+#define DM_LEVEL                       BIT09           /* R */
+#define DP_LEVEL                       BIT08           /* R */
+
+#define PHY_TST                                BIT01           /* RW */
+#define PHY_TSTCLK                     BIT00           /* RW */
+
+/*------- (0x1020) USBSSVER Register */
+#define AHBB_VER                       0x00FF0000      /* R */
+#define EPC_VER                                0x0000FF00      /* R */
+#define SS_VER                         0x000000FF      /* R */
+
+/*------- (0x1024) USBSSCONF Register */
+#define EP_AVAILABLE                   0xFFFF0000      /* R */
+#define DMA_AVAILABLE                  0x0000FFFF      /* R */
+
+/*------- (0x1110:) EPnDCR1 Register */
+#define DCR1_EPn_DMACNT                        0x00FF0000      /* RW */
+
+#define DCR1_EPn_DIR0                  BIT01           /* RW */
+#define DCR1_EPn_REQEN                 BIT00           /* RW */
+
+/*------- (0x1114:) EPnDCR2 Register */
+#define DCR2_EPn_LMPKT                 0x07FF0000      /* RW */
+
+#define DCR2_EPn_MPKT                  0x000007FF      /* RW */
+
+/*------- (0x1118:) EPnTADR Register */
+#define EPn_TADR                       0xFFFFFFFF      /* RW */
+
+
+
+/*===========================================================================*/
+/* Struct */
+/*------- T_EP_REGS */
+typedef struct _T_EP_REGS {
+       u32 EP_CONTROL;                 /* EP Control */
+       u32 EP_STATUS;                  /* EP Status */
+       u32 EP_INT_ENA;                 /* EP Interrupt Enable */
+       u32 EP_DMA_CTRL;                /* EP DMA Control */
+       u32 EP_PCKT_ADRS;               /* EP Maxpacket & BaseAddress */
+       u32 EP_LEN_DCNT;                /* EP Length & DMA count */
+       u32 EP_READ;                    /* EP Read */
+       u32 EP_WRITE;                   /* EP Write */
+} T_EP_REGS, *PT_EP_REGS;
+
+/*------- T_EP_DCR */
+typedef struct _T_EP_DCR {
+       u32 EP_DCR1;                    /* EP_DCR1 */
+       u32 EP_DCR2;                    /* EP_DCR2 */
+       u32 EP_TADR;                    /* EP_TADR */
+       u32 Reserved;                   /* Reserved */
+} T_EP_DCR, *PT_EP_DCR;
+
+/*------- Function Registers */
+typedef struct _T_FC_REGS {
+       u32 USB_CONTROL;                /* (0x0000) USB Control */
+       u32 USB_STATUS;                 /* (0x0004) USB Status */
+       u32 USB_ADDRESS;                /* (0x0008) USB Address */
+       u32 UTMI_CHARACTER_1;           /* (0x000C) UTMI Setting */
+       u32 TEST_CONTROL;               /* (0x0010) TEST Control */
+       u32 Reserved_14;                /* (0x0014) Reserved */
+       u32 SETUP_DATA0;                /* (0x0018) Setup Data0 */
+       u32 SETUP_DATA1;                /* (0x001C) Setup Data1 */
+       u32 USB_INT_STA;                /* (0x0020) USB Interrupt Status */
+       u32 USB_INT_ENA;                /* (0x0024) USB Interrupt Enable */
+       u32 EP0_CONTROL;                /* (0x0028) EP0 Control */
+       u32 EP0_STATUS;                 /* (0x002C) EP0 Status */
+       u32 EP0_INT_ENA;                /* (0x0030) EP0 Interrupt Enable */
+       u32 EP0_LENGTH;                 /* (0x0034) EP0 Length */
+       u32 EP0_READ;                   /* (0x0038) EP0 Read */
+       u32 EP0_WRITE;                  /* (0x003C) EP0 Write */
+
+       T_EP_REGS EP_REGS[REG_EP_NUM];  /* Endpoint Register */
+
+       u8 Reserved220[0x1000-0x220];   /* (0x0220:0x0FFF) Reserved */
+
+       u32 AHBSCTR;                    /* (0x1000) AHBSCTR */
+       u32 AHBMCTR;                    /* (0x1004) AHBMCTR */
+       u32 AHBBINT;                    /* (0x1008) AHBBINT */
+       u32 AHBBINTEN;                  /* (0x100C) AHBBINTEN */
+       u32 EPCTR;                      /* (0x1010) EPCTR */
+       u32 USBF_EPTEST;                /* (0x1014) USBF_EPTEST */
+
+       u8 Reserved1018[0x20-0x18];     /* (0x1018:0x101F) Reserved */
+
+       u32 USBSSVER;                   /* (0x1020) USBSSVER */
+       u32 USBSSCONF;                  /* (0x1024) USBSSCONF */
+
+       u8 Reserved1028[0x110-0x28];    /* (0x1028:0x110F) Reserved */
+
+       T_EP_DCR EP_DCR[REG_EP_NUM];    /* */
+
+       u8 Reserved1200[0x1000-0x200];  /* Reserved */
+
+} __attribute__ ((aligned(32))) T_FC_REGS, *PT_FC_REGS;
+
+
+
+
+
+
+
+
+#define EP0_PACKETSIZE                 64
+#define EP_PACKETSIZE                  1024
+
+/* EPn RAM SIZE */
+#define D_RAM_SIZE_CTRL                        64
+
+/* EPn Bulk Endpoint Max Packet Size */
+#define D_FS_RAM_SIZE_BULK             64
+#define D_HS_RAM_SIZE_BULK             512
+
+
+struct nbu2ss_udc;
+
+
+enum ep0_state {
+       EP0_IDLE,
+       EP0_IN_DATA_PHASE,
+       EP0_OUT_DATA_PHASE,
+       EP0_IN_STATUS_PHASE,
+       EP0_OUT_STATUS_PAHSE,
+       EP0_END_XFER,
+       EP0_SUSPEND,
+       EP0_STALL,
+};
+
+struct nbu2ss_req {
+       struct usb_request              req;
+       struct list_head                queue;
+
+       u32                     div_len;
+       bool            dma_flag;
+       bool            zero;
+
+       bool            unaligned;
+
+       unsigned                        mapped:1;
+};
+
+struct nbu2ss_ep {
+       struct usb_ep                   ep;
+       struct list_head                queue;
+
+       struct nbu2ss_udc               *udc;
+
+       const struct usb_endpoint_descriptor *desc;
+
+       u8              epnum;
+       u8              direct;
+       u8              ep_type;
+
+       unsigned                wedged:1;
+       unsigned                halted:1;
+       unsigned                stalled:1;
+
+       u8              *virt_buf;
+       dma_addr_t      phys_buf;
+};
+
+
+struct nbu2ss_udc {
+       struct usb_gadget gadget;
+       struct usb_gadget_driver *driver;
+       struct platform_device *pdev;
+       struct device *dev;
+       spinlock_t lock;
+       struct completion               *pdone;
+
+       enum ep0_state                  ep0state;
+       enum usb_device_state   devstate;
+       struct usb_ctrlrequest  ctrl;
+       struct nbu2ss_req               ep0_req;
+       u8              ep0_buf[EP0_PACKETSIZE];
+
+       struct nbu2ss_ep        ep[NUM_ENDPOINTS];
+
+       unsigned                softconnect:1;
+       unsigned                vbus_active:1;
+       unsigned                linux_suspended:1;
+       unsigned                linux_resume:1;
+       unsigned                usb_suspended:1;
+       unsigned                self_powered:1;
+       unsigned                remote_wakeup:1;
+       unsigned                udc_enabled:1;
+
+       unsigned                mA;
+
+       u32             curr_config;    /* Current Configuration Number */
+
+       PT_FC_REGS              p_regs;
+};
+
+/* USB register access structure */
+typedef volatile union {
+       struct {
+               unsigned char   DATA[4];
+       } byte;
+       unsigned int            dw;
+} USB_REG_ACCESS;
+
+/*-------------------------------------------------------------------------*/
+#define ERR(stuff...)          printk(KERN_ERR "udc: " stuff)
+
+#endif  /* _LINUX_EMXX_H */