]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
i.MX31: Add ethernet support to i.MX31 Litekit board.
authorMagnus Lilja <lilja.magnus@gmail.com>
Tue, 14 Apr 2009 20:00:07 +0000 (22:00 +0200)
committerSascha Hauer <s.hauer@pengutronix.de>
Thu, 7 May 2009 14:18:36 +0000 (16:18 +0200)
This patch adds the SMSC platform device to the Litekit board.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/arm/mach-mx3/mx31lite.c

index abe6ca39853a47f26963b4af02830a8d13d7bdbc..74734e50de2432c79fcbedf1a6621b55a43b37e1 100644 (file)
@@ -22,6 +22,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,6 +37,7 @@
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
 #include "devices.h"
 
 /*
@@ -46,12 +50,43 @@ static unsigned int mx31lite_pins[] = {
        MX31_PIN_RTS1__RTS1,
        MX31_PIN_TXD1__TXD1,
        MX31_PIN_RXD1__RXD1,
+       /* LAN9117 IRQ pin */
+       IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
 };
 
 static struct imxuart_platform_data uart_pdata = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct smsc911x_platform_config smsc911x_config = {
+       .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+       .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+       .flags          = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+       [0] = {
+               .start          = CS4_BASE_ADDR,
+               .end            = CS4_BASE_ADDR + 0x100,
+               .flags          = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start          = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+               .end            = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device smsc911x_device = {
+       .name           = "smsc911x",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(smsc911x_resources),
+       .resource       = smsc911x_resources,
+       .dev            = {
+               .platform_data = &smsc911x_config,
+       },
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -87,6 +122,10 @@ static void __init mxc_board_init(void)
                                      "mx31lite");
 
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+       /* SMSC9117 IRQ pin */
+       gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+       platform_device_register(&smsc911x_device);
 }
 
 static void __init mx31lite_timer_init(void)