+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
#ifndef _BATYPE_H_
#define _BATYPE_H_
#define DELBA_REASON_END_BA 37
#define DELBA_REASON_UNKNOWN_BA 38
#define DELBA_REASON_TIMEOUT 39
-/* whether need define BA Action frames here?
-struct ieee80211_ADDBA_Req{
- struct ieee80211_header_data header;
- u8 category;
- u8
-} __attribute__ ((packed));
-*/
-//Is this need?I put here just to make it easier to define structure BA_RECORD //WB
+
typedef union _SEQUENCE_CONTROL{
u16 ShortData;
struct
SEQUENCE_CONTROL BaStartSeqCtrl;
} BA_RECORD, *PBA_RECORD;
-#endif //end _BATYPE_H_
-
+#endif
-/********************************************************************************************************************************
- * This file is created to process BA Action Frame. According to 802.11 spec, there are 3 BA action types at all. And as BA is
- * related to TS, this part need some struture defined in QOS side code. Also TX RX is going to be resturctured, so how to send
- * ADDBAREQ ADDBARSP and DELBA packet is still on consideration. Temporarily use MANAGE QUEUE instead of Normal Queue.
- * WB 2008-05-27
- * *****************************************************************************************************************************/
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
#include "ieee80211.h"
#include "rtl819x_BA.h"
u8* tag = NULL;
u16 tmp = 0;
u16 len = ieee->tx_headroom + 9;
- //category(1) + action field(1) + Dialog Token(1) + BA Parameter Set(2) + BA Timeout Value(2) + BA Start SeqCtrl(2)(or StatusCode(2))
IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), frame(%d) sentd to:%pM, ieee->dev:%p\n", __FUNCTION__, type, Dst, ieee->dev);
if (pBA == NULL||ieee == NULL)
{
BAReq->frame_control = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
- //tag += sizeof( struct ieee80211_hdr_3addr); //move to action field
tag = (u8*)skb_put(skb, 9);
*tag ++= ACT_CAT_BA;
*tag ++= type;
IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
return skb;
- //return NULL;
}
/********************************************************************************************************************
struct ieee80211_hdr_3addr* Delba = NULL;
u8* tag = NULL;
u16 tmp = 0;
- //len = head len + DELBA Parameter Set(2) + Reason Code(2)
u16 len = 6 + ieee->tx_headroom;
if (net_ratelimit())
IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
return NULL;
}
-// memset(skb->data, 0, len+sizeof( struct ieee80211_hdr_3addr));
skb_reserve(skb, ieee->tx_headroom);
Delba = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
//some other capability is not ready now.
if( (ieee->current_network.qos_data.active == 0) ||
(ieee->pHTInfo->bCurrentHTSupport == false) ||
- (ieee->pHTInfo->IOTAction & HT_IOT_ACT_REJECT_ADDBA_REQ)) //||
- // (ieee->pStaQos->bEnableRxImmBA == false) )
+ (ieee->pHTInfo->IOTAction & HT_IOT_ACT_REJECT_ADDBA_REQ))
{
rc = ADDBA_STATUS_REFUSED;
IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
goto OnADDBAReq_Fail;
}
// Admit the ADDBA Request
- //
DeActivateBAEntry(ieee, pBA);
pBA->DialogToken = *pDialogToken;
pBA->BaParamSet = *pBaParamSet;
pBA->BaParamSet.field.BufferSize = 1;
else
pBA->BaParamSet.field.BufferSize = 32;
- ActivateBAEntry(ieee, pBA, 0);//pBA->BaTimeoutValue);
+ ActivateBAEntry(ieee, pBA, 0);
ieee80211_send_ADDBARsp(ieee, dst, pBA, ADDBA_STATUS_SUCCESS);
// End of procedure.
pTxTs->bAddBaReqInProgress = false;
pTxTs->bAddBaReqDelayed = false;
del_timer_sync(&pTxTs->TsAddBaTimer);
- //PlatformCancelTimer(Adapter, &pTxTs->TsAddBaTimer);
TxTsDeleteBA(ieee, pTxTs);
}
return 0;
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
#ifndef _RTL819XU_HTTYPE_H_
#define _RTL819XU_HTTYPE_H_
u16 bdHTInfoLen;
HT_SPEC_VER bdHTSpecVer;
- //HT_CAPABILITY_ELE bdHTCapEle;
- //HT_INFORMATION_ELE bdHTInfoEle;
+ HT_CHANNEL_WIDTH bdBandWidth;
u8 bdRT2RTAggregation;
u8 bdRT2RTLongSlotTime;
typedef struct _FALSE_ALARM_STATISTICS{
u32 Cnt_Parity_Fail;
- u32 Cnt_Rate_Illegal;
+ u32 Cnt_Rate_Illegal;
u32 Cnt_Crc8_fail;
u32 Cnt_all;
}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
}HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
typedef enum _HT_IOT_RAFUNC{
+ HT_IOT_RAFUNC_DISABLE_ALL = 0x00,
HT_IOT_RAFUNC_PEER_1R = 0x01,
HT_IOT_RAFUNC_TX_AMSDU = 0x02,
- HT_IOT_RAFUNC_DISABLE_ALL = 0x80,
}HT_IOT_RAFUNC, *PHT_IOT_RAFUNC;
typedef enum _RT_HT_CAP{
RT_HT_CAP_USE_92SE = 0x20,
}RT_HT_CAPBILITY, *PRT_HT_CAPBILITY;
-#endif //_RTL819XU_HTTYPE_H_
-
+#endif
-//As this function is mainly ported from Windows driver, so leave the name little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
#include "ieee80211.h"
#include "rtl819x_HT.h"
u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
static u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
-static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};
-static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f}; //cosa 03202008
+static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};
static u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
static u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
static u8 DLINK_ATHEROS_1[3] = {0x00, 0x1c, 0xf0};
static u8 DLINK_ATHEROS_2[3] = {0x00, 0x21, 0x91};
static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
+static u8 NETGEAR_BROADCOM[3] = {0x00, 0x1f, 0x33};
static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
-// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
-// code in other place??
-//static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
+
/********************************************************************************************************************
*function: This function update default settings in pHTInfo structure
* input: PRT_HIGH_THROUGHPUT pHTInfo
else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
(net->broadcom_cap_exist))
retValue = true;
else if(net->bssht.bdRT2RTAggregation)
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) )
+ (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0))
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
(memcmp(net->bssid, DLINK_ATHEROS_1, 3) == 0)||
(memcmp(net->bssid, DLINK_ATHEROS_2, 3) == 0))
pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
- else if(memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
+ else if ((memcmp(net->bssid, CISCO_BROADCOM, 3)==0)||net->cisco_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
else if ((memcmp(net->bssid, LINKSYS_MARVELL_4400N, 3) == 0) ||
net->marvell_cap_exist)
{
bool retValue = false;
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
+ if(pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM)
{
- if(pHTInfo->IOTPeer == HT_IOT_PEER_MARVELL)
+ if((memcmp(network->bssid, NETGEAR_BROADCOM, 3)==0)
+ && (network->bssht.bdBandWidth == HT_CHANNEL_WIDTH_20_40))
return true;
-
}
return retValue;
}
projects / ~shefty / rdma-dev.git / commitdiff