static inline int il3945_hw_valid_rtc_data_addr(u32 addr)
{
- return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
- (addr < IWL39_RTC_DATA_UPPER_BOUND);
+ return (addr >= IWL39_RTC_DATA_LOWER_BOUND &&
+ addr < IWL39_RTC_DATA_UPPER_BOUND);
}
/* Base physical address of il3945_shared is provided to FH_TSSR_CBB_BASE
u32 table_size = 0;
struct il3945_tpt_entry *tpt_table = NULL;
- if ((rssi < IL_MIN_RSSI_VAL) || (rssi > IL_MAX_RSSI_VAL))
+ if (rssi < IL_MIN_RSSI_VAL || rssi > IL_MAX_RSSI_VAL)
rssi = IL_MIN_RSSI_VAL;
switch (band) {
break;
}
- while ((index < table_size) && (rssi < tpt_table[index].min_rssi))
+ while (index < table_size && rssi < tpt_table[index].min_rssi)
index++;
index = min(index, (table_size - 1));
fail_count = window->counter - window->success_counter;
/* Calculate average throughput, if we have enough history. */
- if ((fail_count >= IL_RATE_MIN_FAILURE_TH) ||
- (window->success_counter >= IL_RATE_MIN_SUCCESS_TH))
+ if (fail_count >= IL_RATE_MIN_FAILURE_TH ||
+ window->success_counter >= IL_RATE_MIN_SUCCESS_TH)
window->average_tpt = ((window->success_ratio *
rs_sta->expected_tpt[index] + 64) / 128);
else
retries = IL_RATE_RETRY_TH;
first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
- if ((first_index < 0) || (first_index >= IL_RATE_COUNT_3945)) {
+ if (first_index < 0 || first_index >= IL_RATE_COUNT_3945) {
D_RATE("leave: Rate out of bounds: %d\n", first_index);
return;
}
/* get user max rate if set */
max_rate_idx = txrc->max_rate_idx;
- if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1))
+ if (sband->band == IEEE80211_BAND_5GHZ && max_rate_idx != -1)
max_rate_idx += IL_FIRST_OFDM_RATE;
- if ((max_rate_idx < 0) || (max_rate_idx >= IL_RATE_COUNT))
+ if (max_rate_idx < 0 || max_rate_idx >= IL_RATE_COUNT)
max_rate_idx = -1;
index = min(rs_sta->last_txrate_idx & 0xffff, IL_RATE_COUNT_3945 - 1);
}
/* force user max rate if set by user */
- if ((max_rate_idx != -1) && (max_rate_idx < index)) {
+ if (max_rate_idx != -1 && max_rate_idx < index) {
if (rate_mask & (1 << max_rate_idx))
index = max_rate_idx;
}
fail_count = window->counter - window->success_counter;
- if (((fail_count < IL_RATE_MIN_FAILURE_TH) &&
- (window->success_counter < IL_RATE_MIN_SUCCESS_TH))) {
+ if (fail_count < IL_RATE_MIN_FAILURE_TH &&
+ window->success_counter < IL_RATE_MIN_SUCCESS_TH) {
spin_unlock_irqrestore(&rs_sta->lock, flags);
D_RATE("Invalid average_tpt on rate %d: "
high = (high_low >> 8) & 0xff;
/* If user set max rate, dont allow higher than user constrain */
- if ((max_rate_idx != -1) && (max_rate_idx < high))
+ if (max_rate_idx != -1 && max_rate_idx < high)
high = IL_RATE_INVALID;
/* Collect Measured throughputs of adjacent rates */
scale_action = 0;
/* Low success ratio , need to drop the rate */
- if ((window->success_ratio < IL_RATE_DECREASE_TH) || !current_tpt) {
+ if (window->success_ratio < IL_RATE_DECREASE_TH || !current_tpt) {
D_RATE("decrease rate because of low success_ratio\n");
scale_action = -1;
/* No throughput measured yet for adjacent rates,
* try increase */
- } else if ((low_tpt == IL_INVALID_VALUE) &&
- (high_tpt == IL_INVALID_VALUE)) {
+ } else if (low_tpt == IL_INVALID_VALUE &&
+ high_tpt == IL_INVALID_VALUE) {
if (high != IL_RATE_INVALID && window->success_ratio >= IL_RATE_INCREASE_TH)
scale_action = 1;
/* Both adjacent throughputs are measured, but neither one has
* better throughput; we're using the best rate, don't change
* it! */
- } else if ((low_tpt != IL_INVALID_VALUE) &&
- (high_tpt != IL_INVALID_VALUE) &&
- (low_tpt < current_tpt) && (high_tpt < current_tpt)) {
+ } else if (low_tpt != IL_INVALID_VALUE &&
+ high_tpt != IL_INVALID_VALUE &&
+ low_tpt < current_tpt && high_tpt < current_tpt) {
D_RATE("No action -- low [%d] & high [%d] < "
"current_tpt [%d]\n",
/* Sanity check; asked for decrease, but success rate or throughput
* has been good at old rate. Don't change it. */
- if ((scale_action == -1) && (low != IL_RATE_INVALID) &&
- ((window->success_ratio > IL_RATE_HIGH_TH) ||
- (current_tpt > (100 * rs_sta->expected_tpt[low]))))
+ if (scale_action == -1 && low != IL_RATE_INVALID &&
+ (window->success_ratio > IL_RATE_HIGH_TH ||
+ current_tpt > 100 * rs_sta->expected_tpt[low]))
scale_action = 0;
switch (scale_action) {
disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
- if (IL_EVT_DISABLE && (array_size == IL_EVT_DISABLE_SIZE)) {
+ if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
D_INFO("Disabling selected uCode log events at 0x%x\n",
disable_ptr);
for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
il->cfg->ops->lib->txq_free_tfd(il, txq);
}
- if (il_queue_space(q) > q->low_mark && (txq_id >= 0) &&
- (txq_id != IWL39_CMD_QUEUE_NUM) &&
- il->mac80211_registered)
+ if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
+ txq_id != IWL39_CMD_QUEUE_NUM && il->mac80211_registered)
il_wake_queue(il, txq);
}
int rate_idx;
int fail;
- if ((index >= txq->q.n_bd) || (il_queue_used(&txq->q, index) == 0)) {
+ if (index >= txq->q.n_bd || il_queue_used(&txq->q, index) == 0) {
IL_ERR("Read index for DMA queue txq_id (%d) index %d "
"is out of range [0-%d] %d %d\n", txq_id,
index, txq->q.n_bd, txq->q.write_ptr,
return;
}
- if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
- || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
return;
}
count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
- if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
+ if (count >= NUM_TFD_CHUNKS || count < 0) {
IL_ERR("Error can not send more than %d chunks\n",
NUM_TFD_CHUNKS);
return -EINVAL;
*/
static inline int il3945_hw_reg_temp_out_of_range(int temperature)
{
- return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
+ return (temperature < -260 || temperature > 25) ? 1 : 0;
}
int il3945_hw_get_temperature(struct il_priv *il)
const struct il_rxon_cmd *rxon1 = &ctx->staging;
const struct il_rxon_cmd *rxon2 = &ctx->active;
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+ if (rxon1->flags == rxon2->flags &&
+ rxon1->filter_flags == rxon2->filter_flags &&
+ rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
+ rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
D_INFO("Using current RXON_ASSOC. Not resending.\n");
return 0;
}
data->num_in_cck_no_fa);
/* If we got too many false alarms this time, reduce sensitivity */
- if ((false_alarms > max_false_alarms) &&
- (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
+ if (false_alarms > max_false_alarms &&
+ data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) {
D_CALIB("norm FA %u > max FA %u\n",
false_alarms, max_false_alarms);
D_CALIB("... reducing sensitivity\n");
* from a previous beacon with too many, or healthy # FAs
* OR 2) We've seen a lot of beacons (100) with too few
* false alarms */
- if ((data->nrg_prev_state != IL_FA_TOO_MANY) &&
- ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
- (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+ if (data->nrg_prev_state != IL_FA_TOO_MANY &&
+ (data->nrg_auto_corr_silence_diff > NRG_DIFF ||
+ data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA)) {
D_CALIB("... increasing sensitivity\n");
/* Increase nrg value to increase sensitivity */
val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
data->auto_corr_cck_mrc =
min((u32)ranges->auto_corr_max_cck_mrc, val);
- } else if ((false_alarms < min_false_alarms) &&
- ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
- (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+ } else if (false_alarms < min_false_alarms &&
+ (data->nrg_auto_corr_silence_diff > NRG_DIFF ||
+ data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA)) {
/* Decrease auto_corr values to increase sensitivity */
val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
for (i = default_chain; i < NUM_RX_CHAINS; i++) {
s32 delta_g = 0;
- if (!(data->disconn_array[i]) &&
- (data->delta_gain_code[i] ==
- CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
+ if (!data->disconn_array[i] &&
+ data->delta_gain_code[i] == CHAIN_NOISE_DELTA_GAIN_INIT_VAL) {
delta_g = average_noise[i] - min_average_noise;
data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
data->delta_gain_code[i] =
/* Make sure we accumulate data for just the associated channel
* (even if scanning). */
- if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
+ if (rxon_chnum != stat_chnum || rxon_band24 != stat_band24) {
D_CALIB("Stats not from chan=%d, band24=%d\n",
rxon_chnum, rxon_band24);
spin_unlock_irqrestore(&il->lock, flags);
il->cfg->base_params->chain_noise_num_beacons;
for (i = 0; i < NUM_RX_CHAINS; i++) {
- if (!(data->disconn_array[i]) &&
- (average_noise[i] <= min_average_noise)) {
+ if (!data->disconn_array[i] &&
+ average_noise[i] <= min_average_noise) {
/* This means that chain i is active and has
* lower noise values so far: */
min_average_noise = average_noise[i];
static inline int il4965_hw_valid_rtc_data_addr(u32 addr)
{
- return (addr >= IWL49_RTC_DATA_LOWER_BOUND) &&
- (addr < IWL49_RTC_DATA_UPPER_BOUND);
+ return (addr >= IWL49_RTC_DATA_LOWER_BOUND &&
+ addr < IWL49_RTC_DATA_UPPER_BOUND);
}
/********************* START TEMPERATURE *************************************/
#define IL_TX_POWER_TEMPERATURE_MAX (410)
#define IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \
- (((t) < IL_TX_POWER_TEMPERATURE_MIN) || \
- ((t) > IL_TX_POWER_TEMPERATURE_MAX))
+ ((t) < IL_TX_POWER_TEMPERATURE_MIN || \
+ (t) > IL_TX_POWER_TEMPERATURE_MAX)
/********************* END TEMPERATURE ***************************************/
unsigned long flags;
spin_lock_irqsave(&rxq->lock, flags);
- while ((il_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
/* The overwritten rxb must be a used one */
rxb = rxq->queue[rxq->write];
BUG_ON(rxb && rxb->page);
"order: %d\n",
il->hw_params.rx_page_order);
- if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ if (rxq->free_count <= RX_LOW_WATERMARK &&
net_ratelimit())
IL_ERR(
"Failed to alloc_pages with %s. "
ctx->staging.rx_chain = cpu_to_le16(rx_chain);
- if (!is_single && (active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE) && is_cam)
+ if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
else
ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
/* skip 9M not supported in ht*/
if (idx >= IL_RATE_9M_INDEX)
idx += 1;
- if ((idx >= IL_FIRST_OFDM_RATE) && (idx <= IL_LAST_OFDM_RATE))
+ if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE)
return idx;
/* legacy rate format, search for match in table */
/* The oldest age we want to keep */
u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
- while (tl->queue_count &&
- (tl->time_stamp < oldest_time)) {
+ while (tl->queue_count && tl->time_stamp < oldest_time) {
tl->total -= tl->packet_count[tl->head];
tl->packet_count[tl->head] = 0;
tl->time_stamp += TID_QUEUE_CELL_SPACING;
fail_count = window->counter - window->success_counter;
/* Calculate average throughput, if we have enough history. */
- if ((fail_count >= IL_RATE_MIN_FAILURE_TH) ||
- (window->success_counter >= IL_RATE_MIN_SUCCESS_TH))
+ if (fail_count >= IL_RATE_MIN_FAILURE_TH ||
+ window->success_counter >= IL_RATE_MIN_SUCCESS_TH)
window->average_tpt = (window->success_ratio * tpt + 64) / 128;
else
window->average_tpt = IL_INVALID_VALUE;
new_ant_type = ant_toggle_lookup[tbl->ant_type];
- while ((new_ant_type != tbl->ant_type) &&
+ while (new_ant_type != tbl->ant_type &&
!il4965_rs_is_valid_ant(valid_ant, new_ant_type))
new_ant_type = ant_toggle_lookup[new_ant_type];
static bool il4965_table_type_matches(struct il_scale_tbl_info *a,
struct il_scale_tbl_info *b)
{
- return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
- (a->is_SGI == b->is_SGI);
+ return (a->lq_type == b->lq_type && a->ant_type == b->ant_type &&
+ a->is_SGI == b->is_SGI);
}
/*
}
if (!ieee80211_is_data(hdr->frame_control) ||
- info->flags & IEEE80211_TX_CTL_NO_ACK)
+ (info->flags & IEEE80211_TX_CTL_NO_ACK))
return;
/* This packet was aggregated but doesn't carry status info */
mac_index += IL_FIRST_OFDM_RATE;
}
/* Here we actually compare this rate to the latest LQ command */
- if ((mac_index < 0) ||
- (tbl_type.is_SGI !=
- !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
- (tbl_type.is_ht40 !=
- !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
- (tbl_type.is_dup !=
- !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) ||
- (tbl_type.ant_type != info->antenna_sel_tx) ||
- (!!(tx_rate & RATE_MCS_HT_MSK) !=
- !!(mac_flags & IEEE80211_TX_RC_MCS)) ||
- (!!(tx_rate & RATE_MCS_GF_MSK) !=
- !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
- (rs_index != mac_index)) {
+ if (mac_index < 0 ||
+ tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI) ||
+ tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ||
+ tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA) ||
+ tbl_type.ant_type != info->antenna_sel_tx ||
+ !!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS) ||
+ !!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD) ||
+ rs_index != mac_index) {
D_RATE(
"initial rate %d does not match %d (0x%x)\n",
mac_index, rs_index, tx_rate);
* conditions) at candidate rate is above expected
* "active" throughput (under perfect conditions).
*/
- if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
- ((active_sr > IL_RATE_DECREASE_TH) &&
- (active_sr <= IL_RATE_HIGH_TH) &&
- (tpt_tbl[rate] <= active_tpt))) ||
- ((active_sr >= IL_RATE_SCALE_SWITCH) &&
- (tpt_tbl[rate] > active_tpt))) {
+ if ((100 * tpt_tbl[rate] > lq_sta->last_tpt &&
+ (active_sr > IL_RATE_DECREASE_TH &&
+ active_sr <= IL_RATE_HIGH_TH &&
+ tpt_tbl[rate] <= active_tpt)) ||
+ (active_sr >= IL_RATE_SCALE_SWITCH &&
+ tpt_tbl[rate] > active_tpt)) {
/* (2nd or later pass)
* If we've already tried to raise the rate, and are
D_RATE("LQ: MIMO2 best rate %d mask %X\n",
rate, rate_mask);
- if ((rate == IL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+ if (rate == IL_RATE_INVALID || !((1 << rate) & rate_mask)) {
D_RATE(
"Can't switch with index %d rate mask %x\n",
rate, rate_mask);
rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, index);
D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
- if ((rate == IL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+ if (rate == IL_RATE_INVALID || !((1 << rate) & rate_mask)) {
D_RATE(
"can not switch with index %d rate mask %x\n",
rate, rate_mask);
* stats in active history.
*/
if (force_search ||
- (lq_sta->total_failed > lq_sta->max_failure_limit) ||
- (lq_sta->total_success > lq_sta->max_success_limit) ||
- ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
- && (flush_interval_passed))) {
+ lq_sta->total_failed > lq_sta->max_failure_limit ||
+ lq_sta->total_success > lq_sta->max_success_limit ||
+ (!lq_sta->search_better_tbl && lq_sta->flush_timer &&
+ flush_interval_passed)) {
D_RATE("LQ: stay is expired %d %d %d\n:",
lq_sta->total_failed,
lq_sta->total_success,
/* Send management frames and NO_ACK data using lowest rate. */
/* TODO: this could probably be improved.. */
if (!ieee80211_is_data(hdr->frame_control) ||
- info->flags & IEEE80211_TX_CTL_NO_ACK)
+ (info->flags & IEEE80211_TX_CTL_NO_ACK))
return;
if (!sta || !lq_sta)
lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
tid = il4965_rs_tl_add_packet(lq_sta, hdr);
- if ((tid != MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) {
+ if (tid != MAX_TID_COUNT && (lq_sta->tx_agg_tid_en & (1 << tid))) {
tid_data = &il->stations[lq_sta->lq.sta_id].tid[tid];
if (tid_data->agg.state == IL_AGG_OFF)
lq_sta->is_agg = 0;
}
/* force user max rate if set by user */
- if ((lq_sta->max_rate_idx != -1) &&
- (lq_sta->max_rate_idx < index)) {
+ if (lq_sta->max_rate_idx != -1 &&
+ lq_sta->max_rate_idx < index) {
index = lq_sta->max_rate_idx;
update_lq = 1;
window = &(tbl->win[index]);
* in current association (use new rate found above).
*/
fail_count = window->counter - window->success_counter;
- if ((fail_count < IL_RATE_MIN_FAILURE_TH) &&
- (window->success_counter < IL_RATE_MIN_SUCCESS_TH)) {
+ if (fail_count < IL_RATE_MIN_FAILURE_TH &&
+ window->success_counter < IL_RATE_MIN_SUCCESS_TH) {
D_RATE("LQ: still below TH. succ=%d total=%d "
"for index %d\n",
window->success_counter, window->counter, index);
high = (high_low >> 8) & 0xff;
/* If user set max rate, dont allow higher than user constrain */
- if ((lq_sta->max_rate_idx != -1) &&
- (lq_sta->max_rate_idx < high))
+ if (lq_sta->max_rate_idx != -1 &&
+ lq_sta->max_rate_idx < high)
high = IL_RATE_INVALID;
sr = window->success_ratio;
scale_action = 0;
/* Too many failures, decrease rate */
- if ((sr <= IL_RATE_DECREASE_TH) || (current_tpt == 0)) {
+ if (sr <= IL_RATE_DECREASE_TH || current_tpt == 0) {
D_RATE(
"decrease rate because of low success_ratio\n");
scale_action = -1;
/* No throughput measured yet for adjacent rates; try increase. */
- } else if ((low_tpt == IL_INVALID_VALUE) &&
- (high_tpt == IL_INVALID_VALUE)) {
+ } else if (low_tpt == IL_INVALID_VALUE &&
+ high_tpt == IL_INVALID_VALUE) {
if (high != IL_RATE_INVALID && sr >= IL_RATE_INCREASE_TH)
scale_action = 1;
/* Both adjacent throughputs are measured, but neither one has better
* throughput; we're using the best rate, don't change it! */
- else if ((low_tpt != IL_INVALID_VALUE) &&
- (high_tpt != IL_INVALID_VALUE) &&
- (low_tpt < current_tpt) &&
- (high_tpt < current_tpt))
+ else if (low_tpt != IL_INVALID_VALUE && high_tpt != IL_INVALID_VALUE &&
+ low_tpt < current_tpt && high_tpt < current_tpt)
scale_action = 0;
/* At least one adjacent rate's throughput is measured,
if (high_tpt != IL_INVALID_VALUE) {
/* Higher rate has better throughput */
if (high_tpt > current_tpt &&
- sr >= IL_RATE_INCREASE_TH) {
+ sr >= IL_RATE_INCREASE_TH) {
scale_action = 1;
} else {
scale_action = 0;
/* Sanity check; asked for decrease, but success rate or throughput
* has been good at old rate. Don't change it. */
- if ((scale_action == -1) && (low != IL_RATE_INVALID) &&
- ((sr > IL_RATE_HIGH_TH) ||
- (current_tpt > (100 * tbl->expected_tpt[low]))))
+ if (scale_action == -1 && low != IL_RATE_INVALID &&
+ (sr > IL_RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
scale_action = 0;
switch (scale_action) {
* 2) Not just finishing up a search
* 3) Allowing a new search
*/
- if (!update_lq && !done_search &&
- !lq_sta->stay_in_tbl && window->counter) {
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl &&
+ window->counter) {
/* Save current throughput to compare with "search" throughput*/
lq_sta->last_tpt = current_tpt;
* have been tried and compared, stay in this best modulation
* mode for a while before next round of mode comparisons. */
if (lq_sta->enable_counter &&
- (lq_sta->action_counter >= tbl1->max_search)) {
- if ((lq_sta->last_tpt > IL_AGG_TPT_THREHOLD) &&
+ lq_sta->action_counter >= tbl1->max_search) {
+ if (lq_sta->last_tpt > IL_AGG_TPT_THREHOLD &&
(lq_sta->tx_agg_tid_en & (1 << tid)) &&
- (tid != MAX_TID_COUNT)) {
+ tid != MAX_TID_COUNT) {
tid_data =
&il->stations[lq_sta->lq.sta_id].tid[tid];
if (tid_data->agg.state == IL_AGG_OFF) {
tbl = &(lq_sta->lq_info[active_tbl]);
- if ((i < 0) || (i >= IL_RATE_COUNT))
+ if (i < 0 || i >= IL_RATE_COUNT)
i = 0;
rate = il_rates[i].plcp;
/* Get max rate if user set max rate */
if (lq_sta) {
lq_sta->max_rate_idx = txrc->max_rate_idx;
- if ((sband->band == IEEE80211_BAND_5GHZ) &&
- (lq_sta->max_rate_idx != -1))
+ if (sband->band == IEEE80211_BAND_5GHZ &&
+ lq_sta->max_rate_idx != -1)
lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE;
- if ((lq_sta->max_rate_idx < 0) ||
- (lq_sta->max_rate_idx >= IL_RATE_COUNT))
+ if (lq_sta->max_rate_idx < 0 ||
+ lq_sta->max_rate_idx >= IL_RATE_COUNT)
lq_sta->max_rate_idx = -1;
}
IEEE80211_TX_RC_GREEN_FIELD;
} else {
/* Check for invalid rates */
- if ((rate_idx < 0) || (rate_idx >= IL_RATE_COUNT_LEGACY) ||
- ((sband->band == IEEE80211_BAND_5GHZ) &&
- (rate_idx < IL_FIRST_OFDM_RATE)))
+ if (rate_idx < 0 || rate_idx >= IL_RATE_COUNT_LEGACY ||
+ (sband->band == IEEE80211_BAND_5GHZ &&
+ rate_idx < IL_FIRST_OFDM_RATE))
rate_idx = rate_lowest_index(sband, sta);
/* On valid 5 GHz rate, adjust index */
else if (sband->band == IEEE80211_BAND_5GHZ)
/* Repeat initial/next rate.
* For legacy IL_NUMBER_TRY == 1, this loop will not execute.
* For HT IL_HT_NUMBER_TRY == 3, this executes twice. */
- while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
+ while (repeat_rate > 0 && index < LINK_QUAL_MAX_RETRY_NUM) {
if (is_legacy(tbl_type.lq_type)) {
if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
ant_toggle_cnt++;
* index is invalid.
*/
rate_idx = info->control.rates[0].idx;
- if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS ||
- (rate_idx < 0) || (rate_idx > IL_RATE_COUNT_LEGACY))
+ if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) ||
+ rate_idx < 0 || rate_idx > IL_RATE_COUNT_LEGACY)
rate_idx = rate_lowest_index(&il->bands[info->band],
info->control.sta);
/* For 5 GHZ band, remap mac80211 rate indices into driver indices */
rate_flags = 0;
/* Set CCK flag as needed */
- if ((rate_idx >= IL_FIRST_CCK_RATE) && (rate_idx <= IL_LAST_CCK_RATE))
+ if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE)
rate_flags |= RATE_MCS_CCK_MSK;
/* Set up antennas */
if (sta_priv && sta_priv->client && !is_agg)
atomic_inc(&sta_priv->pending_frames);
- if ((il_queue_space(q) < q->high_mark) &&
- il->mac80211_registered) {
+ if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
if (wait_write_ptr) {
spin_lock_irqsave(&il->lock, flags);
txq->need_update = 1;
case IL_EMPTYING_HW_QUEUE_DELBA:
/* We are reclaiming the last packet of the */
/* aggregated HW queue */
- if ((txq_id == tid_data->agg.txq_id) &&
- (q->read_ptr == q->write_ptr)) {
+ if (txq_id == tid_data->agg.txq_id &&
+ q->read_ptr == q->write_ptr) {
u16 ssn = SEQ_TO_SN(tid_data->seq_number);
int tx_fifo = il4965_get_fifo_from_tid(ctx, tid);
D_HT(
int nfreed = 0;
struct ieee80211_hdr *hdr;
- if ((index >= q->n_bd) || (il_queue_used(q, index) == 0)) {
+ if (index >= q->n_bd || il_queue_used(q, index) == 0) {
IL_ERR("Read index for DMA queue txq id (%d), index %d, "
"is out of range [0-%d] %d %d.\n", txq_id,
index, q->n_bd, q->write_ptr, q->read_ptr);
int freed = il4965_tx_queue_reclaim(il, scd_flow, index);
il4965_free_tfds_in_queue(il, sta_id, tid, freed);
- if ((il_queue_space(&txq->q) > txq->q.low_mark) &&
+ if (il_queue_space(&txq->q) > txq->q.low_mark &&
il->mac80211_registered &&
- (agg->state != IL_EMPTYING_HW_QUEUE_DELBA))
+ agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
il_wake_queue(il, txq);
il4965_txq_check_empty(il, sta_id, tid, scd_flow);
{
int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
>> RXON_FLG_CHANNEL_MODE_POS;
- return ((chan_mod == CHANNEL_MODE_PURE_40) ||
- (chan_mod == CHANNEL_MODE_MIXED));
+ return (chan_mod == CHANNEL_MODE_PURE_40 ||
+ chan_mod == CHANNEL_MODE_MIXED);
}
static void il4965_nic_config(struct il_priv *il)
{
struct il_chain_noise_data *data = &(il->chain_noise_data);
- if ((data->state == IL_CHAIN_NOISE_ALIVE) &&
+ if (data->state == IL_CHAIN_NOISE_ALIVE &&
il_is_any_associated(il)) {
struct il_calib_diff_gain_cmd cmd;
{
s32 comp = 0;
- if ((TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
- (TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage))
+ if (TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage ||
+ TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage)
return 0;
il4965_math_div_round(current_voltage - eeprom_voltage,
if (il->calib_info->band_info[b].ch_from == 0)
continue;
- if ((channel >= il->calib_info->band_info[b].ch_from)
- && (channel <= il->calib_info->band_info[b].ch_to))
+ if (channel >= il->calib_info->band_info[b].ch_from &&
+ channel <= il->calib_info->band_info[b].ch_to)
break;
}
const struct il_rxon_cmd *rxon1 = &ctx->staging;
const struct il_rxon_cmd *rxon2 = &ctx->active;
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_ht_single_stream_basic_rates ==
- rxon2->ofdm_ht_single_stream_basic_rates) &&
- (rxon1->ofdm_ht_dual_stream_basic_rates ==
- rxon2->ofdm_ht_dual_stream_basic_rates) &&
- (rxon1->rx_chain == rxon2->rx_chain) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+ if (rxon1->flags == rxon2->flags &&
+ rxon1->filter_flags == rxon2->filter_flags &&
+ rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
+ rxon1->ofdm_ht_single_stream_basic_rates ==
+ rxon2->ofdm_ht_single_stream_basic_rates &&
+ rxon1->ofdm_ht_dual_stream_basic_rates ==
+ rxon2->ofdm_ht_dual_stream_basic_rates &&
+ rxon1->rx_chain == rxon2->rx_chain &&
+ rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
D_INFO("Using current RXON_ASSOC. Not resending.\n");
return 0;
}
* abort any previous channel switch if still in process
*/
if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status) &&
- (il->switch_channel != ctx->staging.channel)) {
+ il->switch_channel != ctx->staging.channel) {
D_11H("abort channel switch on %d\n",
le16_to_cpu(il->switch_channel));
il_chswitch_done(il, false);
* calculate the ucode channel switch time
* adding TSF as one of the factor for when to switch
*/
- if ((il->ucode_beacon_time > tsf_low) && beacon_interval) {
+ if (il->ucode_beacon_time > tsf_low && beacon_interval) {
if (switch_count > ((il->ucode_beacon_time - tsf_low) /
beacon_interval)) {
switch_count -= (il->ucode_beacon_time -
u8 *qc = NULL;
unsigned long flags;
- if ((index >= txq->q.n_bd) || (il_queue_used(&txq->q, index) == 0)) {
+ if (index >= txq->q.n_bd || il_queue_used(&txq->q, index) == 0) {
IL_ERR("Read index for DMA queue txq_id (%d) index %d "
"is out of range [0-%d] %d %d\n", txq_id,
index, txq->q.n_bd, txq->q.write_ptr,
tid, freed);
if (il->mac80211_registered &&
- (il_queue_space(&txq->q) > txq->q.low_mark)
- && (agg->state != IL_EMPTYING_HW_QUEUE_DELBA))
+ il_queue_space(&txq->q) > txq->q.low_mark &&
+ agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
il_wake_queue(il, txq);
}
} else {
D_TX_REPLY("Station not known\n");
if (il->mac80211_registered &&
- (il_queue_space(&txq->q) > txq->q.low_mark))
+ il_queue_space(&txq->q) > txq->q.low_mark)
il_wake_queue(il, txq);
}
if (qc && likely(sta_id != IL_INVALID_STATION))
static inline bool il4965_is_tx_success(u32 status)
{
status &= TX_STATUS_MSK;
- return (status == TX_STATUS_SUCCESS) ||
- (status == TX_STATUS_DIRECT_DONE);
+ return (status == TX_STATUS_SUCCESS ||
+ status == TX_STATUS_DIRECT_DONE);
}
u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant_idx, u8 valid);
il->tx_power_user_lmt = max_tx_power;
il->tx_power_next = max_tx_power;
- if ((il->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
- il->cfg->sku & IL_SKU_A) {
+ if (il->bands[IEEE80211_BAND_5GHZ].n_channels == 0 &&
+ (il->cfg->sku & IL_SKU_A)) {
IL_INFO("Incorrectly detected BG card as ABG. "
"Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
il->pci_dev->device,
enum ieee80211_band band = ch->band;
u16 channel = ch->hw_value;
- if ((le16_to_cpu(ctx->staging.channel) == channel) &&
- (il->band == band))
+ if (le16_to_cpu(ctx->staging.channel) == channel && il->band == band)
return 0;
ctx->staging.channel = cpu_to_le16(channel);
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
maxstreams += 1;
- if ((ht_cap->mcs.rx_mask[1] == 0) &&
- (ht_cap->mcs.rx_mask[2] == 0))
+ if (ht_cap->mcs.rx_mask[1] == 0 &&
+ ht_cap->mcs.rx_mask[2] == 0)
ht_conf->single_chain_sufficient = true;
if (maxstreams <= 1)
ht_conf->single_chain_sufficient = true;
* mac80211 decides to do both changes at once because
* it will invoke post_associate.
*/
- if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON)
+ if (vif->type == NL80211_IFTYPE_ADHOC && (changes & BSS_CHANGED_BEACON))
il_beacon_update(hw, vif);
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
if (changes & BSS_CHANGED_ERP_CTS_PROT) {
D_MAC80211(
"ERP_CTS %d\n", bss_conf->use_cts_prot);
- if (bss_conf->use_cts_prot &&
- (il->band != IEEE80211_BAND_5GHZ))
+ if (bss_conf->use_cts_prot && il->band != IEEE80211_BAND_5GHZ)
ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
else
ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
goto none;
}
- if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+ if (inta == 0xFFFFFFFF || (inta & 0xFFFFFFF0) == 0xa5a5a5a0) {
/* Hardware disappeared. It might have already raised
* an interrupt */
IL_WARN("HARDWARE GONE?? INTA == 0x%08x\n", inta);
{
u32 count = sizeof(u32);
- if ((il != NULL) && (values != NULL)) {
+ if (il != NULL && values != NULL) {
for (; 0 < len; len -= count, reg += count, values++)
il_wr(il, reg, *values);
}
LQ_MAX,
};
-#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
+#define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A)
#define is_siso(tbl) ((tbl) == LQ_SISO)
#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
#define is_mimo(tbl) (is_mimo2(tbl))
if (!il_is_associated_ctx(ctx))
continue;
value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
- if ((value > IL_PASSIVE_DWELL_BASE) || !value)
+ if (value > IL_PASSIVE_DWELL_BASE || !value)
value = IL_PASSIVE_DWELL_BASE;
value = (value * 98) / 100 - IL_CHANNEL_TUNE_TIME * 2;
passive = min(value, passive);
if (ctx->ctxid != il->stations[i].ctxid)
continue;
if ((il->stations[i].used & IL_STA_DRIVER_ACTIVE) &&
- !(il->stations[i].used & IL_STA_UCODE_ACTIVE)) {
+ !(il->stations[i].used & IL_STA_UCODE_ACTIVE)) {
D_ASSOC("Restoring sta %pM\n",
il->stations[i].sta.sta.addr);
il->stations[i].sta.mode = 0;
struct il_queue *q = &txq->q;
int nfreed = 0;
- if ((idx >= q->n_bd) || (il_queue_used(q, idx) == 0)) {
+ if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
IL_ERR("Read index for DMA queue txq id (%d), index %d, "
"is out of range [0-%d] %d %d.\n", txq_id,
idx, q->n_bd, q->write_ptr, q->read_ptr);
il_txq_update_write_ptr(il, txq);
spin_unlock_irqrestore(&il->lock, flags);
- if ((il_queue_space(q) < q->high_mark)
+ if (il_queue_space(q) < q->high_mark
&& il->mac80211_registered) {
if (wait_write_ptr) {
spin_lock_irqsave(&il->lock, flags);
spin_lock_irqsave(&rxq->lock, flags);
write = rxq->write & ~0x7;
- while ((il_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
/* Get next free Rx buffer, remove from free list */
element = rxq->rx_free.next;
rxb = list_entry(element, struct il_rx_mem_buffer, list);
/* If we've added more space for the firmware to place data, tell it.
* Increment device's write pointer in multiples of 8. */
- if ((rxq->write_actual != (rxq->write & ~0x7))
- || (abs(rxq->write - rxq->read) > 7)) {
+ if (rxq->write_actual != (rxq->write & ~0x7) ||
+ abs(rxq->write - rxq->read) > 7) {
spin_lock_irqsave(&rxq->lock, flags);
rxq->need_update = 1;
spin_unlock_irqrestore(&rxq->lock, flags);
if (!page) {
if (net_ratelimit())
D_INFO("Failed to allocate SKB buffer.\n");
- if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ if (rxq->free_count <= RX_LOW_WATERMARK &&
net_ratelimit())
IL_ERR("Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
* Ucode should set SEQ_RX_FRAME bit if ucode-originated,
* but apparently a few don't get set; catch them here. */
reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
- (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
- (pkt->hdr.cmd != REPLY_TX);
+ pkt->hdr.cmd != STATISTICS_NOTIFICATION &&
+ pkt->hdr.cmd != REPLY_TX;
/* Based on type of command response or notification,
* handle those that need handling via function in
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
rates[i].flags = 0;
- if ((i > IWL39_LAST_OFDM_RATE) || (i < IL_FIRST_OFDM_RATE)) {
+ if (i > IWL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
/*
* If CCK != 1M then set short preamble rate flag.
*/
il->measurement_status = 0;
spin_unlock_irqrestore(&il->lock, flags);
- while (size && (PAGE_SIZE - len)) {
+ while (size && PAGE_SIZE - len) {
hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
PAGE_SIZE - len, 1);
len = strlen(buf);
return count;
}
- if ((ant >= 0) && (ant <= 2)) {
+ if (ant >= 0 && ant <= 2) {
D_INFO("Setting antenna select to %d.\n", ant);
il3945_mod_params.antenna = (enum il3945_antenna)ant;
} else
projects / ~shefty / rdma-dev.git / commitdiff