Substituted/removed macro's.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
#include "main.h"
#include "alloc.h"
+/* Max # of entries in Tx FIFO based on 4kb page size */
+#define NTXD 256
+/* Max # of entries in Rx FIFO based on 4kb page size */
+#define NRXD 256
+/* try to keep this # rbufs posted to the chip */
+#define NRXBUFPOST 32
+/* Maximum SCBs in cache for STA */
+#define MAXSCB 32
+
+/* Count of packet callback structures. either of following
+ * 1. Set to the number of SCBs since a STA
+ * can queue up a rate callback for each IBSS STA it knows about, and an AP can
+ * queue up an "are you there?" Null Data callback for each associated STA
+ * 2. controlled by tunable config file
+ */
+#define MAXPKTCB MAXSCB /* Max number of packet callbacks */
+
+/* Number of BSS handled in ucode bcn/prb */
+#define BRCMS_MAX_UCODE_BSS (16)
+/* Number of BSS handled in sw bcn/prb */
+#define BRCMS_MAX_UCODE_BSS4 (4)
+
+/* data msg txq hiwat mark */
+#define BRCMS_DATAHIWAT 50
+#define BRCMS_AMPDUDATAHIWAT 255
+
+/* bounded rx loops */
+#define RXBND 8 /* max # frames to process in brcms_c_recv() */
+#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */
+
static void brcms_c_tunables_init(struct brcms_tunables *tunables, uint devid)
{
tunables->ntxd = NTXD;
"error (0x%x)\n", wlc->pub->unit,
txs->phyerr);
- if (WL_ERROR_ON()) {
+ if (brcm_msg_level & LOG_ERROR_VAL) {
brcmu_prpkt("txpkt (AMPDU)", p);
brcms_c_print_txdesc((struct d11txh *) p->data);
}
* Now that the country abbreviation is set, if the radio supports 2G,
* then set channel 14 restrictions based on the new locale.
*/
- if (wlc->pub->_nbands > 1 || BAND_2G(wlc->band->bandtype))
+ if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
brcms_c_japan(wlc) ? true :
false);
for (i = 0; i < wlc->pub->_nbands;
i++, band = wlc->bandstate[OTHERBANDUNIT(wlc)]) {
- li = BAND_5G(band->bandtype) ?
+ li = (band->bandtype == BRCM_BAND_5G) ?
brcms_c_get_locale_5g(country->locale_5G) :
brcms_c_get_locale_2g(country->locale_2G);
wlc_cm->bandstate[band->bandunit].locale_flags = li->flags;
- li_mimo = BAND_5G(band->bandtype) ?
+ li_mimo = (band->bandtype == BRCM_BAND_5G) ?
brcms_c_get_mimo_5g(country->locale_mimo_5G) :
brcms_c_get_mimo_2g(country->locale_mimo_2G);
chan = CHSPEC_CHANNEL(chanspec);
band = wlc->bandstate[CHSPEC_BANDUNIT(chanspec)];
- li = BAND_5G(band->bandtype) ?
+ li = (band->bandtype == BRCM_BAND_5G) ?
brcms_c_get_locale_5g(country->locale_5G) :
brcms_c_get_locale_2g(country->locale_2G);
- li_mimo = BAND_5G(band->bandtype) ?
+ li_mimo = (band->bandtype == BRCM_BAND_5G) ?
brcms_c_get_mimo_5g(country->locale_mimo_5G) :
brcms_c_get_mimo_2g(country->locale_mimo_2G);
}
/* CCK txpwr limits for 2.4G band */
- if (BAND_2G(band->bandtype)) {
+ if (band->bandtype == BRCM_BAND_2G) {
maxpwr = li->maxpwr[CHANNEL_POWER_IDX_2G_CCK(chan)];
maxpwr = maxpwr - delta;
}
/* OFDM txpwr limits for 2.4G or 5G bands */
- if (BAND_2G(band->bandtype))
+ if (band->bandtype == BRCM_BAND_2G)
maxpwr = li->maxpwr[CHANNEL_POWER_IDX_2G_OFDM(chan)];
else
maxpwr = li->maxpwr[CHANNEL_POWER_IDX_5G(chan)];
maxpwr = min(maxpwr, conducted_ofdm_max);
/* Keep OFDM lmit below CCK limit */
- if (BAND_2G(band->bandtype))
+ if (band->bandtype == BRCM_BAND_2G)
maxpwr = min_t(int, maxpwr, txpwr->cck[0]);
for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
delta = band->antgain - QDB(6); /* Excess over 6 dB */
}
- if (BAND_2G(band->bandtype))
+ if (band->bandtype == BRCM_BAND_2G)
maxpwr_idx = (chan - 1);
else
maxpwr_idx = CHANNEL_POWER_IDX_5G(chan);
#define NRATE_STF_STBC 2 /* stf mode STBC */
#define NRATE_STF_SDM 3 /* stf mode SDM */
+#define MAX_DMA_SEGS 4
+
/*
* 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL.
*/
brcms_b_set_cwmax(wlc_hw, wlc_hw->band->CWmax);
brcms_b_update_slot_timing(wlc_hw,
- BAND_5G(wlc_hw->band->
- bandtype) ? true : wlc_hw->
- shortslot);
+ wlc_hw->band->bandtype == BRCM_BAND_5G ?
+ true : wlc_hw->shortslot);
/* write phytype and phyvers */
brcms_b_write_shm(wlc_hw, M_PHYTYPE, (u16) wlc_hw->band->phytype);
{
wlc_hw->shortslot = shortslot;
- if (BAND_2G(brcms_b_bandtype(wlc_hw)) && wlc_hw->up) {
+ if (brcms_b_bandtype(wlc_hw) == BRCM_BAND_2G && wlc_hw->up) {
brcms_c_suspend_mac_and_wait(wlc_hw->wlc);
brcms_b_update_slot_timing(wlc_hw, shortslot);
brcms_c_enable_mac(wlc_hw->wlc);
bandtype = wlc->band->bandtype;
/* get antennas available */
- aa = (s8) getintvar(vars, (BAND_5G(bandtype) ? "aa5g" : "aa2g"));
+ aa = (s8) getintvar(vars, bandtype == BRCM_BAND_5G ? "aa5g" : "aa2g");
if (aa == 0)
aa = (s8) getintvar(vars,
- (BAND_5G(bandtype) ? "aa1" : "aa0"));
+ bandtype == BRCM_BAND_5G ? "aa1" : "aa0");
if ((aa < 1) || (aa > 15)) {
wiphy_err(wlc->wiphy, "wl%d: %s: Invalid antennas available in"
" srom (0x%x), using 3\n", unit, __func__, aa);
/* Compute Antenna Gain */
wlc->band->antgain =
- (s8) getintvar(vars, (BAND_5G(bandtype) ? "ag1" : "ag0"));
+ (s8) getintvar(vars, bandtype == BRCM_BAND_5G ? "ag1" : "ag0");
brcms_c_attach_antgain_init(wlc);
return true;
wlc->band->CWmax = PHY_CWMAX;
/* init gmode value */
- if (BAND_2G(wlc->band->bandtype)) {
+ if (wlc->band->bandtype == BRCM_BAND_2G) {
wlc->band->gmode = GMODE_AUTO;
brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER,
wlc->band->gmode);
/* shortslot is an 11g feature, so no more work if we are
* currently on the 5G band
*/
- if (BAND_5G(wlc->band->bandtype))
+ if (wlc->band->bandtype == BRCM_BAND_5G)
break;
if (wlc->pub->up && wlc->pub->associated) {
int tot_streams = MCS_TXS(mcs) + RSPEC_STC(ratespec);
dur -= PREN_PREAMBLE + (tot_streams * PREN_PREAMBLE_EXT);
/* payload calculation matches that of regular ofdm */
- if (BAND_2G(wlc->band->bandtype))
+ if (wlc->band->bandtype == BRCM_BAND_2G)
dur -= DOT11_OFDM_SIGNAL_EXTENSION;
/* kNdbps = kbps * 4 */
kNdps =
if (!is_multicast_ether_addr(h->addr1))
mcl |= TXC_IMMEDACK;
- if (BAND_5G(wlc->band->bandtype))
+ if (wlc->band->bandtype == BRCM_BAND_5G)
mcl |= TXC_FREQBAND_5G;
if (CHSPEC_IS40(wlc_phy_chanspec_get(wlc->band->pi)))
mcl = le16_to_cpu(txh->MacTxControlLow);
if (txs->phyerr) {
- if (WL_ERROR_ON()) {
+ if (brcm_msg_level & LOG_ERROR_VAL) {
wiphy_err(wlc->wiphy, "phyerr 0x%x, rate 0x%x\n",
txs->phyerr, txh->MainRates);
brcms_c_print_txdesc(txh);
APHY_TAIL_NBITS) * 1000, 2 * kNdps);
dur += APHY_SYMBOL_TIME * nsyms;
- if (BAND_2G(wlc->band->bandtype))
+ if (wlc->band->bandtype == BRCM_BAND_2G)
dur += DOT11_OFDM_SIGNAL_EXTENSION;
} else if (IS_OFDM(rate)) {
dur = APHY_PREAMBLE_TIME;
CEIL((APHY_SERVICE_NBITS + 8 * mac_len + APHY_TAIL_NBITS),
Ndps);
dur += APHY_SYMBOL_TIME * nsyms;
- if (BAND_2G(wlc->band->bandtype))
+ if (wlc->band->bandtype == BRCM_BAND_2G)
dur += DOT11_OFDM_SIGNAL_EXTENSION;
} else {
/*
const struct brcms_c_rateset *rs_dflt;
if (BRCMS_PHY_11N_CAP(wlc->band)) {
- if (BAND_5G(wlc->band->bandtype))
+ if (wlc->band->bandtype == BRCM_BAND_5G)
rs_dflt = &ofdm_mimo_rates;
else
rs_dflt = &cck_ofdm_mimo_rates;
else
sflags = ai_core_sflags(sh->sih, 0, 0);
- if (BAND_5G(bandtype)) {
+ if (bandtype == BRCM_BAND_5G) {
if ((sflags & (SISF_5G_PHY | SISF_DB_PHY)) == 0)
return NULL;
}
pi->phycal_tempdelta = 0;
- if (BAND_2G(bandtype) && (sflags & SISF_2G_PHY))
+ if (bandtype == BRCM_BAND_2G && (sflags & SISF_2G_PHY))
pi->pubpi.coreflags = SICF_GMODE;
wlapi_bmac_corereset(pi->sh->physhim, pi->pubpi.coreflags);
!pi->pubpi.phy_type == PHY_TYPE_LCN)
goto err;
- if (BAND_5G(bandtype)) {
+ if (bandtype == BRCM_BAND_5G) {
if (!ISNPHY(pi))
goto err;
} else if (!ISNPHY(pi) && !ISLCNPHY(pi)) {
wlc_set_phy_uninitted(pi);
pi->bw = WL_CHANSPEC_BW_20;
- pi->radio_chanspec =
- BAND_2G(bandtype) ? CH20MHZ_CHSPEC(1) : CH20MHZ_CHSPEC(36);
+ pi->radio_chanspec = (bandtype == BRCM_BAND_2G) ?
+ CH20MHZ_CHSPEC(1) : CH20MHZ_CHSPEC(36);
pi->rxiq_samps = PHY_NOISE_SAMPLE_LOG_NUM_NPHY;
pi->rxiq_antsel = ANT_RX_DIV_DEF;
(PHYTYPE_IS(phy_type, PHY_TYPE_N)) ||
(PHYTYPE_IS(phy_type, PHY_TYPE_LCN)) ||
(PHYTYPE_IS(phy_type, PHY_TYPE_SSN))) {
- if (BAND_5G(bandtype))
+ if (bandtype == BRCM_BAND_5G)
rs_dflt = (bw == BRCMS_20_MHZ ?
&ofdm_mimo_rates : &ofdm_40bw_mimo_rates);
else
&cck_ofdm_mimo_rates :
&cck_ofdm_40bw_mimo_rates);
} else if (PHYTYPE_IS(phy_type, PHY_TYPE_LP)) {
- rs_dflt = (BAND_5G(bandtype)) ? &ofdm_rates : &cck_ofdm_rates;
+ rs_dflt = (bandtype == BRCM_BAND_5G) ?
+ &ofdm_rates : &cck_ofdm_rates;
} else if (PHYTYPE_IS(phy_type, PHY_TYPE_A)) {
rs_dflt = &ofdm_rates;
} else if (PHYTYPE_IS(phy_type, PHY_TYPE_G)) {
#define WL_CHAN_FREQ_RANGE_5GM 2
#define WL_CHAN_FREQ_RANGE_5GH 3
-#define MAX_DMA_SEGS 4
-
/* boardflags */
/* Board has gpio 9 controlling the PA */
* ***********************************************
*/
-/* Max # of entries in Tx FIFO based on 4kb page size */
-#define NTXD 256
-/* Max # of entries in Rx FIFO based on 4kb page size */
-#define NRXD 256
-/* try to keep this # rbufs posted to the chip */
-#define NRXBUFPOST 32
-/* Maximum SCBs in cache for STA */
-#define MAXSCB 32
-
/* max allowed number of mpdus in an ampdu (2 streams) */
#define AMPDU_NUM_MPDU 16
-/* Count of packet callback structures. either of following
- * 1. Set to the number of SCBs since a STA
- * can queue up a rate callback for each IBSS STA it knows about, and an AP can
- * queue up an "are you there?" Null Data callback for each associated STA
- * 2. controlled by tunable config file
- */
-#define MAXPKTCB MAXSCB /* Max number of packet callbacks */
-
/* NetBSD also needs to keep track of this */
-/* Number of BSS handled in ucode bcn/prb */
-#define BRCMS_MAX_UCODE_BSS (16)
-/* Number of BSS handled in sw bcn/prb */
-#define BRCMS_MAX_UCODE_BSS4 (4)
/* max # BSS configs */
#define BRCMS_MAXBSSCFG (1)
/* max # available networks */
#define MAXBSS 64
-/* data msg txq hiwat mark */
-#define BRCMS_DATAHIWAT 50
-#define BRCMS_AMPDUDATAHIWAT 255
-
-/* bounded rx loops */
-#define RXBND 8 /* max # frames to process in brcms_c_recv() */
-#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */
-
-#define BAND_5G(bt) ((bt) == BRCM_BAND_5G)
-#define BAND_2G(bt) ((bt) == BRCM_BAND_2G)
#define BCMMSG(dev, fmt, args...) \
do { \
wiphy_err(dev, "%s: " fmt, __func__, ##args); \
} while (0)
-#define WL_ERROR_ON() (brcm_msg_level & LOG_ERROR_VAL)
-
/*
* Register access macros.
*
projects / ~shefty / rdma-dev.git / commitdiff