]> git.openfabrics.org - ~emulex/infiniband.git/commitdiff
rtl8192u: fix whitespace around 'for' in r8192U_core.c
authorXenia Ragiadakou <burzalodowa@gmail.com>
Wed, 22 May 2013 15:22:34 +0000 (18:22 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 22 May 2013 22:34:32 +0000 (15:34 -0700)
This patch fixes whitespace around 'for' following the
kernel coding style conventions.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/rtl8192u/r8192U_core.c

index 8ccd1a6fd8458bc114fa3c688dc1e065de49e237..8dc271e937f7e9e3a27a229da61d452eafa5184d 100644 (file)
@@ -525,7 +525,7 @@ static int proc_get_registers(struct seq_file *m, void *v)
                //printk( "\nD: %2x> ", n);
                seq_printf(m, "\nD:  %2x > ",n);
 
-               for(i=0;i<16 && n<=max;i++,n++)
+               for (i=0;i<16 && n<=max;i++,n++)
                        seq_printf(m, "%2x ",read_nic_byte(dev,0x300|n));
 
                //      printk("%2x ",read_nic_byte(dev,n));
@@ -708,12 +708,12 @@ void print_buffer(u32 *buffer, int len)
 
        printk("ASCII BUFFER DUMP (len: %x):\n",len);
 
-       for(i=0;i<len;i++)
+       for (i=0;i<len;i++)
                printk("%c",buf[i]);
 
        printk("\nBINARY BUFFER DUMP (len: %x):\n",len);
 
-       for(i=0;i<len;i++)
+       for (i=0;i<len;i++)
                printk("%x",buf[i]);
 
        printk("\n");
@@ -742,7 +742,7 @@ void tx_timeout(struct net_device *dev)
 void dump_eprom(struct net_device *dev)
 {
        int i;
-       for(i=0; i<63; i++)
+       for (i=0; i<63; i++)
                RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev,i));
 }
 
@@ -755,10 +755,10 @@ void rtl8192_dump_reg(struct net_device *dev)
 
        RT_TRACE(COMP_PHY, "Dumping NIC register map");
 
-       for(n=0;n<=max;)
+       for (n=0;n<=max;)
        {
                printk( "\nD: %2x> ", n);
-               for(i=0;i<16 && n<=max;i++,n++)
+               for (i=0;i<16 && n<=max;i++,n++)
                        printk("%2x ",read_nic_byte(dev,n));
        }
        printk("\n");
@@ -1239,7 +1239,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
        /* Get the total aggregation length including the padding space and
         * sub frame header.
         */
-       for(i = 1; i < pSendList->nr_drv_agg_frames; i++) {
+       for (i = 1; i < pSendList->nr_drv_agg_frames; i++) {
                TotalLength += DrvAggr_PaddingAdd(dev, skb);
                skb = pSendList->tx_agg_frames[i];
                TotalLength += (skb->len + TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES);
@@ -1264,7 +1264,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
        memcpy(agg_skb->cb, skb->cb, sizeof(skb->cb));
        memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
 
-       for(i = 1; i < pSendList->nr_drv_agg_frames; i++) {
+       for (i = 1; i < pSendList->nr_drv_agg_frames; i++) {
                /* push the next sub frame to be 256 byte aline */
                skb_put(agg_skb,DrvAggr_PaddingAdd(dev,skb));
 
@@ -1376,7 +1376,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
                memcpy(skb_put(agg_skb,skb->len),skb->data,skb->len);
        }
 
-       for(i = 0; i < pSendList->nr_drv_agg_frames; i++) {
+       for (i = 0; i < pSendList->nr_drv_agg_frames; i++) {
                dev_kfree_skb_any(pSendList->tx_agg_frames[i]);
        }
 
@@ -2148,7 +2148,7 @@ short rtl8192_usb_initendpoints(struct net_device *dev)
                return -ENOMEM;
 
 #ifndef JACKSON_NEW_RX
-       for(i=0;i<(MAX_RX_URB+1);i++){
+       for (i=0;i<(MAX_RX_URB+1);i++){
 
                priv->rx_urb[i] = usb_alloc_urb(0,GFP_KERNEL);
 
@@ -2202,7 +2202,7 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev)
        struct r8192_priv *priv = ieee80211_priv(dev);
 
        if (priv->rx_urb){
-               for(i=0;i<(MAX_RX_URB+1);i++){
+               for (i=0;i<(MAX_RX_URB+1);i++){
                        usb_kill_urb(priv->rx_urb[i]);
                        usb_free_urb(priv->rx_urb[i]);
                }
@@ -2225,7 +2225,7 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev)
 #ifndef JACKSON_NEW_RX
 
        if (priv->rx_urb){
-               for(i=0;i<(MAX_RX_URB+1);i++){
+               for (i=0;i<(MAX_RX_URB+1);i++){
                        usb_kill_urb(priv->rx_urb[i]);
                        kfree(priv->rx_urb[i]->transfer_buffer);
                        usb_free_urb(priv->rx_urb[i]);
@@ -2328,7 +2328,7 @@ void rtl8192_qos_activate(struct work_struct *work)
        /* It better set slot time at first */
        /* For we just support b/g mode at present, let the slot time at 9/20 selection */
        /* update the ac parameter to related registers */
-       for(i = 0; i <  QOS_QUEUE_NUM; i++) {
+       for (i = 0; i <  QOS_QUEUE_NUM; i++) {
                //Mode G/A: slotTimeTimer = 9; Mode B: 20
                u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
                u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[i]))<< AC_PARAM_TXOP_LIMIT_OFFSET)|
@@ -2755,13 +2755,13 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
        skb_queue_head_init(&priv->skb_queue);
 
        /* Tx related queue */
-       for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+       for (i = 0; i < MAX_QUEUE_SIZE; i++) {
                skb_queue_head_init(&priv->ieee80211->skb_waitQ [i]);
        }
-       for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+       for (i = 0; i < MAX_QUEUE_SIZE; i++) {
                skb_queue_head_init(&priv->ieee80211->skb_aggQ [i]);
        }
-       for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+       for (i = 0; i < MAX_QUEUE_SIZE; i++) {
                skb_queue_head_init(&priv->ieee80211->skb_drv_aggQ [i]);
        }
        priv->rf_set_chan = rtl8192_phy_SwChnl;
@@ -3376,7 +3376,7 @@ if (Adapter->ResetProgress == RESET_TYPE_NORESET)
                        RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
                        MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
                        // Those actions will be discard in MgntActSet_RF_State because of the same state
-                       for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+                       for (eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
                                PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
                }
                else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS)
@@ -3397,7 +3397,7 @@ if (Adapter->ResetProgress == RESET_TYPE_NORESET)
                {
                        MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
                        // Those actions will be discard in MgntActSet_RF_State because of the same state
-                       for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
+                       for (eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
                                PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
                }
        }
@@ -3442,7 +3442,7 @@ if (Adapter->ResetProgress == RESET_TYPE_NORESET)
                        u32 i, TempCCk;
                        u32 tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
                //      u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
-                       for(i = 0; i<TxBBGainTableLength; i++)
+                       for (i = 0; i<TxBBGainTableLength; i++)
                        {
                                if (tmpRegA == priv->txbbgain_table[i].txbbgain_value)
                                {
@@ -3455,7 +3455,7 @@ if (Adapter->ResetProgress == RESET_TYPE_NORESET)
 
                        TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
 
-                       for(i=0 ; i<CCKTxBBGainTableLength ; i++)
+                       for (i=0 ; i<CCKTxBBGainTableLength ; i++)
                        {
 
                                if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
@@ -3725,7 +3725,7 @@ CamRestoreAllEntry(       struct net_device *dev)
            (priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP104))
        {
 
-               for(EntryId=0; EntryId<4; EntryId++)
+               for (EntryId=0; EntryId<4; EntryId++)
                {
                        {
                                MacAddr = CAM_CONST_ADDR[EntryId];
@@ -3790,7 +3790,7 @@ CamRestoreAllEntry(       struct net_device *dev)
        if (priv->ieee80211->group_key_type == KEY_TYPE_TKIP)
        {
                MacAddr = CAM_CONST_BROAD;
-               for(EntryId=1 ; EntryId<4 ; EntryId++)
+               for (EntryId=1 ; EntryId<4 ; EntryId++)
                {
                        {
                                setKey(dev,
@@ -3814,7 +3814,7 @@ CamRestoreAllEntry(       struct net_device *dev)
        else if (priv->ieee80211->group_key_type == KEY_TYPE_CCMP)
        {
                MacAddr = CAM_CONST_BROAD;
-               for(EntryId=1; EntryId<4 ; EntryId++)
+               for (EntryId=1; EntryId<4 ; EntryId++)
                {
                        {
                                setKey(dev,
@@ -3964,7 +3964,7 @@ void CAM_read_entry(
         u32 ulStatus;
        s32 i=100;
 //     printk("=======>start read CAM\n");
-       for(entry_i=0;entry_i<CAM_CONTENT_COUNT;entry_i++)
+       for (entry_i=0;entry_i<CAM_CONTENT_COUNT;entry_i++)
        {
        // polling bit, and No Write enable, and address
                target_command= entry_i+CAM_CONTENT_COUNT*iIndex;
@@ -4007,7 +4007,7 @@ void rtl819x_update_rxcounts(
        SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum);
        priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod;
        priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod;
-       for( i=0; i<priv->ieee80211->LinkDetectInfo.SlotNum; i++ ){
+       for ( i=0; i<priv->ieee80211->LinkDetectInfo.SlotNum; i++ ){
                *TotalRxBcnNum += priv->ieee80211->LinkDetectInfo.RxBcnNum[i];
                *TotalRxDataNum += priv->ieee80211->LinkDetectInfo.RxDataNum[i];
        }
@@ -4183,14 +4183,14 @@ int rtl8192_down(struct net_device *dev)
        //rtl8192_irq_disable(dev);
 
  /* Tx related queue release */
-       for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+       for (i = 0; i < MAX_QUEUE_SIZE; i++) {
                skb_queue_purge(&priv->ieee80211->skb_waitQ [i]);
        }
-       for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+       for (i = 0; i < MAX_QUEUE_SIZE; i++) {
                skb_queue_purge(&priv->ieee80211->skb_aggQ [i]);
        }
 
-       for(i = 0; i < MAX_QUEUE_SIZE; i++) {
+       for (i = 0; i < MAX_QUEUE_SIZE; i++) {
                skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
        }
 
@@ -4377,7 +4377,7 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 #ifdef JOHN_HWSEC_DEBUG
                //john's test 0711
                printk("@@ wrq->u pointer = ");
-               for(i=0;i<wrq->u.data.length;i++){
+               for (i=0;i<wrq->u.data.length;i++){
                        if (i%10==0) printk("\n");
                        printk( "%8x|", ((u32 *)wrq->u.data.pointer)[i] );
                }
@@ -4690,7 +4690,7 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021
                // <2> Showed on UI for engineering
                if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
                {
-                       for(nspatial_stream = 0; nspatial_stream<2 ; nspatial_stream++) // 2 spatial stream
+                       for (nspatial_stream = 0; nspatial_stream<2 ; nspatial_stream++) // 2 spatial stream
                        {
                                if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1)
                                {
@@ -4966,7 +4966,7 @@ static void rtl8192_query_rxphystatus(
                //
                // (1)Get RSSI for HT rate
                //
-               for(i=RF90_PATH_A; i<priv->NumTotalRFPath; i++)
+               for (i=RF90_PATH_A; i<priv->NumTotalRFPath; i++)
                {
                        // 2008/01/30 MH we will judge RF RX path now.
                        if (priv->brfpath_rxenable[i])
@@ -5021,7 +5021,7 @@ static void rtl8192_query_rxphystatus(
                else
                        max_spatial_stream = 1; //only spatial stream 1 makes sense
 
-               for(i=0; i<max_spatial_stream; i++)
+               for (i=0; i<max_spatial_stream; i++)
                {
                        tmp_rxevm =     pofdm_buf->rxevm_X[i];
                        rx_evmX = (char)(tmp_rxevm);
@@ -5935,7 +5935,7 @@ void setKey(      struct net_device *dev,
 //     usConfig |= BIT15 | (KeyType<<2) | (DefaultKey<<5) | KeyIndex;
 
 
-       for(i=0 ; i<CAM_CONTENT_COUNT; i++){
+       for (i=0 ; i<CAM_CONTENT_COUNT; i++){
                TargetCommand  = i+CAM_CONTENT_COUNT*EntryNo;
                TargetCommand |= BIT31|BIT16;