]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
[media] rc/keymaps: Rename Hauppauge table as rc-hauppauge
authorMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 24 Jan 2011 15:18:47 +0000 (12:18 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 22 Mar 2011 22:24:14 +0000 (19:24 -0300)
There are two "hauppauge-new" keymaps, one with protocol
unknown, and the other with the protocol marked accordingly.
However, both tables are miss-named.

Also, the old rc-hauppauge-new is broken, as it mixes
three different controllers as if they were just one.

This patch solves half of the problem by renaming the
correct keycode table as just rc-hauppauge. This table
contains the codes for the four different types of
remote controllers found on Hauppauge cards, properly
mapped with their different addresses.

 create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c
 delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
[Jarod: fix up RC_MAP_HAUPPAUGE defines]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
drivers/media/dvb/siano/sms-cards.c
drivers/media/rc/keymaps/Makefile
drivers/media/rc/keymaps/rc-hauppauge.c [new file with mode: 0644]
drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c [deleted file]
drivers/media/rc/mceusb.c
drivers/media/video/cx23885/cx23885-input.c
drivers/media/video/em28xx/em28xx-cards.c
include/media/rc-map.h

index 25b43e587fa6c274142debf1a0ec3ab2f5593c7f..af121db88ea002318bf28cb4135c7955ff334927 100644 (file)
@@ -64,7 +64,7 @@ static struct sms_board sms_boards[] = {
                .type   = SMS_NOVA_B0,
                .fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
                .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
-               .rc_codes = RC_MAP_RC5_HAUPPAUGE_NEW,
+               .rc_codes = RC_MAP_HAUPPAUGE,
                .board_cfg.leds_power = 26,
                .board_cfg.led0 = 27,
                .board_cfg.led1 = 28,
index cb721216571c65330b95c90240c84c27722d23f4..1f446f99b61f9e1ca37f6bb8cf9ec74c6375a3f8 100644 (file)
@@ -68,7 +68,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
                        rc-proteus-2309.o \
                        rc-purpletv.o \
                        rc-pv951.o \
-                       rc-rc5-hauppauge-new.o \
+                       rc-hauppauge.o \
                        rc-rc5-tv.o \
                        rc-rc6-mce.o \
                        rc-real-audio-220-32-keys.o \
diff --git a/drivers/media/rc/keymaps/rc-hauppauge.c b/drivers/media/rc/keymaps/rc-hauppauge.c
new file mode 100644 (file)
index 0000000..cd3db77
--- /dev/null
@@ -0,0 +1,241 @@
+/* rc-hauppauge.c - Keytable for Hauppauge Remote Controllers
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * This map currently contains the code for four different RCs:
+ *     - New Hauppauge Gray;
+ *     - Old Hauppauge Gray (with a golden screen for media keys);
+ *     - Hauppauge Black;
+ *     - DSR-0112 remote bundled with Haupauge MiniStick.
+ *
+ * Copyright (c) 2010-2011 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Hauppauge:the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ *
+ * This table contains the complete RC5 code, instead of just the data part
+ */
+
+static struct rc_map_table rc5_hauppauge_new[] = {
+       /*
+        * Remote Controller Hauppauge Gray found on modern devices
+        * Keycodes start with address = 0x1e
+        */
+
+       { 0x1e3b, KEY_SELECT },         /* GO / house symbol */
+       { 0x1e3d, KEY_POWER2 },         /* system power (green button) */
+
+       { 0x1e1c, KEY_TV },
+       { 0x1e18, KEY_VIDEO },          /* Videos */
+       { 0x1e19, KEY_AUDIO },          /* Music */
+       { 0x1e1a, KEY_CAMERA },         /* Pictures */
+
+       { 0x1e1b, KEY_EPG },            /* Guide */
+       { 0x1e0c, KEY_RADIO },
+
+       { 0x1e14, KEY_UP },
+       { 0x1e15, KEY_DOWN },
+       { 0x1e16, KEY_LEFT },
+       { 0x1e17, KEY_RIGHT },
+       { 0x1e25, KEY_OK },             /* OK */
+
+       { 0x1e1f, KEY_EXIT },           /* back/exit */
+       { 0x1e0d, KEY_MENU },
+
+       { 0x1e10, KEY_VOLUMEUP },
+       { 0x1e11, KEY_VOLUMEDOWN },
+
+       { 0x1e12, KEY_PREVIOUS },       /* previous channel */
+       { 0x1e0f, KEY_MUTE },
+
+       { 0x1e20, KEY_CHANNELUP },      /* channel / program + */
+       { 0x1e21, KEY_CHANNELDOWN },    /* channel / program - */
+
+       { 0x1e37, KEY_RECORD },         /* recording */
+       { 0x1e36, KEY_STOP },
+
+       { 0x1e32, KEY_REWIND },         /* backward << */
+       { 0x1e35, KEY_PLAY },
+       { 0x1e34, KEY_FASTFORWARD },    /* forward >> */
+
+       { 0x1e24, KEY_PREVIOUSSONG },   /* replay |< */
+       { 0x1e30, KEY_PAUSE },          /* pause */
+       { 0x1e1e, KEY_NEXTSONG },       /* skip >| */
+
+       { 0x1e01, KEY_1 },
+       { 0x1e02, KEY_2 },
+       { 0x1e03, KEY_3 },
+
+       { 0x1e04, KEY_4 },
+       { 0x1e05, KEY_5 },
+       { 0x1e06, KEY_6 },
+
+       { 0x1e07, KEY_7 },
+       { 0x1e08, KEY_8 },
+       { 0x1e09, KEY_9 },
+
+       { 0x1e0a, KEY_TEXT },           /* keypad asterisk as well */
+       { 0x1e00, KEY_0 },
+       { 0x1e0e, KEY_SUBTITLE },       /* also the Pound key (#) */
+
+       { 0x1e0b, KEY_RED },            /* red button */
+       { 0x1e2e, KEY_GREEN },          /* green button */
+       { 0x1e38, KEY_YELLOW },         /* yellow key */
+       { 0x1e29, KEY_BLUE },           /* blue key */
+
+       /*
+        * Old Remote Controller Hauppauge Gray with a golden screen
+        * Keycodes start with address = 0x1f
+        */
+       { 0x1f3d, KEY_POWER2 },         /* system power (green button) */
+       { 0x1f3b, KEY_SELECT },         /* GO */
+
+       /* Keys 0 to 9 */
+       { 0x1f00, KEY_0 },
+       { 0x1f01, KEY_1 },
+       { 0x1f02, KEY_2 },
+       { 0x1f03, KEY_3 },
+       { 0x1f04, KEY_4 },
+       { 0x1f05, KEY_5 },
+       { 0x1f06, KEY_6 },
+       { 0x1f07, KEY_7 },
+       { 0x1f08, KEY_8 },
+       { 0x1f09, KEY_9 },
+
+       { 0x1f1f, KEY_EXIT },           /* back/exit */
+       { 0x1f0d, KEY_MENU },
+
+       { 0x1f10, KEY_VOLUMEUP },
+       { 0x1f11, KEY_VOLUMEDOWN },
+       { 0x1f20, KEY_CHANNELUP },      /* channel / program + */
+       { 0x1f21, KEY_CHANNELDOWN },    /* channel / program - */
+       { 0x1f25, KEY_ENTER },          /* OK */
+
+       { 0x1f0b, KEY_RED },            /* red button */
+       { 0x1f2e, KEY_GREEN },          /* green button */
+       { 0x1f38, KEY_YELLOW },         /* yellow key */
+       { 0x1f29, KEY_BLUE },           /* blue key */
+
+       { 0x1f0f, KEY_MUTE },
+       { 0x1f0c, KEY_RADIO },          /* There's no indicator on this key */
+       { 0x1f3c, KEY_ZOOM },           /* full */
+
+       { 0x1f32, KEY_REWIND },         /* backward << */
+       { 0x1f35, KEY_PLAY },
+       { 0x1f34, KEY_FASTFORWARD },    /* forward >> */
+
+       { 0x1f37, KEY_RECORD },         /* recording */
+       { 0x1f36, KEY_STOP },
+       { 0x1f30, KEY_PAUSE },          /* pause */
+
+       { 0x1f24, KEY_PREVIOUSSONG },   /* replay |< */
+       { 0x1f1e, KEY_NEXTSONG },       /* skip >| */
+
+       /*
+        * Keycodes for DSR-0112 remote bundled with Haupauge MiniStick
+        * Keycodes start with address = 0x1d
+        */
+       { 0x1d00, KEY_0 },
+       { 0x1d01, KEY_1 },
+       { 0x1d02, KEY_2 },
+       { 0x1d03, KEY_3 },
+       { 0x1d04, KEY_4 },
+       { 0x1d05, KEY_5 },
+       { 0x1d06, KEY_6 },
+       { 0x1d07, KEY_7 },
+       { 0x1d08, KEY_8 },
+       { 0x1d09, KEY_9 },
+       { 0x1d0a, KEY_TEXT },
+       { 0x1d0d, KEY_MENU },
+       { 0x1d0f, KEY_MUTE },
+       { 0x1d10, KEY_VOLUMEUP },
+       { 0x1d11, KEY_VOLUMEDOWN },
+       { 0x1d12, KEY_PREVIOUS },        /* Prev.Ch .. ??? */
+       { 0x1d14, KEY_UP },
+       { 0x1d15, KEY_DOWN },
+       { 0x1d16, KEY_LEFT },
+       { 0x1d17, KEY_RIGHT },
+       { 0x1d1c, KEY_TV },
+       { 0x1d1e, KEY_NEXT },           /* >|             */
+       { 0x1d1f, KEY_EXIT },
+       { 0x1d20, KEY_CHANNELUP },
+       { 0x1d21, KEY_CHANNELDOWN },
+       { 0x1d24, KEY_LAST },           /* <|             */
+       { 0x1d25, KEY_OK },
+       { 0x1d30, KEY_PAUSE },
+       { 0x1d32, KEY_REWIND },
+       { 0x1d34, KEY_FASTFORWARD },
+       { 0x1d35, KEY_PLAY },
+       { 0x1d36, KEY_STOP },
+       { 0x1d37, KEY_RECORD },
+       { 0x1d3b, KEY_GOTO },
+       { 0x1d3d, KEY_POWER },
+       { 0x1d3f, KEY_HOME },
+
+       /*
+        * Keycodes for the old Black Remote Controller
+        * This one also uses RC-5 protocol
+        * Keycodes start with address = 0x00
+        */
+       { 0x001f, KEY_TV },
+       { 0x0020, KEY_CHANNELUP },
+       { 0x000c, KEY_RADIO },
+
+       { 0x0011, KEY_VOLUMEDOWN },
+       { 0x002e, KEY_ZOOM },           /* full screen */
+       { 0x0010, KEY_VOLUMEUP },
+
+       { 0x000d, KEY_MUTE },
+       { 0x0021, KEY_CHANNELDOWN },
+       { 0x0022, KEY_VIDEO },          /* source */
+
+       { 0x0001, KEY_1 },
+       { 0x0002, KEY_2 },
+       { 0x0003, KEY_3 },
+
+       { 0x0004, KEY_4 },
+       { 0x0005, KEY_5 },
+       { 0x0006, KEY_6 },
+
+       { 0x0007, KEY_7 },
+       { 0x0008, KEY_8 },
+       { 0x0009, KEY_9 },
+
+       { 0x001e, KEY_RED },    /* Reserved */
+       { 0x0000, KEY_0 },
+       { 0x0026, KEY_SLEEP },  /* Minimize */
+};
+
+static struct rc_map_list rc5_hauppauge_new_map = {
+       .map = {
+               .scan    = rc5_hauppauge_new,
+               .size    = ARRAY_SIZE(rc5_hauppauge_new),
+               .rc_type = RC_TYPE_RC5,
+               .name    = RC_MAP_HAUPPAUGE,
+       }
+};
+
+static int __init init_rc_map_rc5_hauppauge_new(void)
+{
+       return rc_map_register(&rc5_hauppauge_new_map);
+}
+
+static void __exit exit_rc_map_rc5_hauppauge_new(void)
+{
+       rc_map_unregister(&rc5_hauppauge_new_map);
+}
+
+module_init(init_rc_map_rc5_hauppauge_new)
+module_exit(exit_rc_map_rc5_hauppauge_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
deleted file mode 100644 (file)
index cb312da..0000000
+++ /dev/null
@@ -1,235 +0,0 @@
-/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Hauppauge:the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- *
- * This table contains the complete RC5 code, instead of just the data part
- */
-
-static struct rc_map_table rc5_hauppauge_new[] = {
-       /*
-        * Remote Controller Hauppauge Gray found on modern devices
-        * Keycodes start with address = 0x1e
-        */
-
-       { 0x1e3b, KEY_SELECT },         /* GO / house symbol */
-       { 0x1e3d, KEY_POWER2 },         /* system power (green button) */
-
-       { 0x1e1c, KEY_TV },
-       { 0x1e18, KEY_VIDEO },          /* Videos */
-       { 0x1e19, KEY_AUDIO },          /* Music */
-       { 0x1e1a, KEY_CAMERA },         /* Pictures */
-
-       { 0x1e1b, KEY_EPG },            /* Guide */
-       { 0x1e0c, KEY_RADIO },
-
-       { 0x1e14, KEY_UP },
-       { 0x1e15, KEY_DOWN },
-       { 0x1e16, KEY_LEFT },
-       { 0x1e17, KEY_RIGHT },
-       { 0x1e25, KEY_OK },             /* OK */
-
-       { 0x1e1f, KEY_EXIT },           /* back/exit */
-       { 0x1e0d, KEY_MENU },
-
-       { 0x1e10, KEY_VOLUMEUP },
-       { 0x1e11, KEY_VOLUMEDOWN },
-
-       { 0x1e12, KEY_PREVIOUS },       /* previous channel */
-       { 0x1e0f, KEY_MUTE },
-
-       { 0x1e20, KEY_CHANNELUP },      /* channel / program + */
-       { 0x1e21, KEY_CHANNELDOWN },    /* channel / program - */
-
-       { 0x1e37, KEY_RECORD },         /* recording */
-       { 0x1e36, KEY_STOP },
-
-       { 0x1e32, KEY_REWIND },         /* backward << */
-       { 0x1e35, KEY_PLAY },
-       { 0x1e34, KEY_FASTFORWARD },    /* forward >> */
-
-       { 0x1e24, KEY_PREVIOUSSONG },   /* replay |< */
-       { 0x1e30, KEY_PAUSE },          /* pause */
-       { 0x1e1e, KEY_NEXTSONG },       /* skip >| */
-
-       { 0x1e01, KEY_1 },
-       { 0x1e02, KEY_2 },
-       { 0x1e03, KEY_3 },
-
-       { 0x1e04, KEY_4 },
-       { 0x1e05, KEY_5 },
-       { 0x1e06, KEY_6 },
-
-       { 0x1e07, KEY_7 },
-       { 0x1e08, KEY_8 },
-       { 0x1e09, KEY_9 },
-
-       { 0x1e0a, KEY_TEXT },           /* keypad asterisk as well */
-       { 0x1e00, KEY_0 },
-       { 0x1e0e, KEY_SUBTITLE },       /* also the Pound key (#) */
-
-       { 0x1e0b, KEY_RED },            /* red button */
-       { 0x1e2e, KEY_GREEN },          /* green button */
-       { 0x1e38, KEY_YELLOW },         /* yellow key */
-       { 0x1e29, KEY_BLUE },           /* blue key */
-
-       /*
-        * Old Remote Controller Hauppauge Gray with a golden screen
-        * Keycodes start with address = 0x1f
-        */
-       { 0x1f3d, KEY_POWER2 },         /* system power (green button) */
-       { 0x1f3b, KEY_SELECT },         /* GO */
-
-       /* Keys 0 to 9 */
-       { 0x1f00, KEY_0 },
-       { 0x1f01, KEY_1 },
-       { 0x1f02, KEY_2 },
-       { 0x1f03, KEY_3 },
-       { 0x1f04, KEY_4 },
-       { 0x1f05, KEY_5 },
-       { 0x1f06, KEY_6 },
-       { 0x1f07, KEY_7 },
-       { 0x1f08, KEY_8 },
-       { 0x1f09, KEY_9 },
-
-       { 0x1f1f, KEY_EXIT },           /* back/exit */
-       { 0x1f0d, KEY_MENU },
-
-       { 0x1f10, KEY_VOLUMEUP },
-       { 0x1f11, KEY_VOLUMEDOWN },
-       { 0x1f20, KEY_CHANNELUP },      /* channel / program + */
-       { 0x1f21, KEY_CHANNELDOWN },    /* channel / program - */
-       { 0x1f25, KEY_ENTER },          /* OK */
-
-       { 0x1f0b, KEY_RED },            /* red button */
-       { 0x1f2e, KEY_GREEN },          /* green button */
-       { 0x1f38, KEY_YELLOW },         /* yellow key */
-       { 0x1f29, KEY_BLUE },           /* blue key */
-
-       { 0x1f0f, KEY_MUTE },
-       { 0x1f0c, KEY_RADIO },          /* There's no indicator on this key */
-       { 0x1f3c, KEY_ZOOM },           /* full */
-
-       { 0x1f32, KEY_REWIND },         /* backward << */
-       { 0x1f35, KEY_PLAY },
-       { 0x1f34, KEY_FASTFORWARD },    /* forward >> */
-
-       { 0x1f37, KEY_RECORD },         /* recording */
-       { 0x1f36, KEY_STOP },
-       { 0x1f30, KEY_PAUSE },          /* pause */
-
-       { 0x1f24, KEY_PREVIOUSSONG },   /* replay |< */
-       { 0x1f1e, KEY_NEXTSONG },       /* skip >| */
-
-       /*
-        * Keycodes for DSR-0112 remote bundled with Haupauge MiniStick
-        * Keycodes start with address = 0x1d
-        */
-       { 0x1d00, KEY_0 },
-       { 0x1d01, KEY_1 },
-       { 0x1d02, KEY_2 },
-       { 0x1d03, KEY_3 },
-       { 0x1d04, KEY_4 },
-       { 0x1d05, KEY_5 },
-       { 0x1d06, KEY_6 },
-       { 0x1d07, KEY_7 },
-       { 0x1d08, KEY_8 },
-       { 0x1d09, KEY_9 },
-       { 0x1d0a, KEY_TEXT },
-       { 0x1d0d, KEY_MENU },
-       { 0x1d0f, KEY_MUTE },
-       { 0x1d10, KEY_VOLUMEUP },
-       { 0x1d11, KEY_VOLUMEDOWN },
-       { 0x1d12, KEY_PREVIOUS },        /* Prev.Ch .. ??? */
-       { 0x1d14, KEY_UP },
-       { 0x1d15, KEY_DOWN },
-       { 0x1d16, KEY_LEFT },
-       { 0x1d17, KEY_RIGHT },
-       { 0x1d1c, KEY_TV },
-       { 0x1d1e, KEY_NEXT },           /* >|             */
-       { 0x1d1f, KEY_EXIT },
-       { 0x1d20, KEY_CHANNELUP },
-       { 0x1d21, KEY_CHANNELDOWN },
-       { 0x1d24, KEY_LAST },           /* <|             */
-       { 0x1d25, KEY_OK },
-       { 0x1d30, KEY_PAUSE },
-       { 0x1d32, KEY_REWIND },
-       { 0x1d34, KEY_FASTFORWARD },
-       { 0x1d35, KEY_PLAY },
-       { 0x1d36, KEY_STOP },
-       { 0x1d37, KEY_RECORD },
-       { 0x1d3b, KEY_GOTO },
-       { 0x1d3d, KEY_POWER },
-       { 0x1d3f, KEY_HOME },
-
-       /*
-        * Keycodes for the old Black Remote Controller
-        * This one also uses RC-5 protocol
-        * Keycodes start with address = 0x00
-        */
-       { 0x001f, KEY_TV },
-       { 0x0020, KEY_CHANNELUP },
-       { 0x000c, KEY_RADIO },
-
-       { 0x0011, KEY_VOLUMEDOWN },
-       { 0x002e, KEY_ZOOM },           /* full screen */
-       { 0x0010, KEY_VOLUMEUP },
-
-       { 0x000d, KEY_MUTE },
-       { 0x0021, KEY_CHANNELDOWN },
-       { 0x0022, KEY_VIDEO },          /* source */
-
-       { 0x0001, KEY_1 },
-       { 0x0002, KEY_2 },
-       { 0x0003, KEY_3 },
-
-       { 0x0004, KEY_4 },
-       { 0x0005, KEY_5 },
-       { 0x0006, KEY_6 },
-
-       { 0x0007, KEY_7 },
-       { 0x0008, KEY_8 },
-       { 0x0009, KEY_9 },
-
-       { 0x001e, KEY_RED },    /* Reserved */
-       { 0x0000, KEY_0 },
-       { 0x0026, KEY_SLEEP },  /* Minimize */
-};
-
-static struct rc_map_list rc5_hauppauge_new_map = {
-       .map = {
-               .scan    = rc5_hauppauge_new,
-               .size    = ARRAY_SIZE(rc5_hauppauge_new),
-               .rc_type = RC_TYPE_RC5,
-               .name    = RC_MAP_RC5_HAUPPAUGE_NEW,
-       }
-};
-
-static int __init init_rc_map_rc5_hauppauge_new(void)
-{
-       return rc_map_register(&rc5_hauppauge_new_map);
-}
-
-static void __exit exit_rc_map_rc5_hauppauge_new(void)
-{
-       rc_map_unregister(&rc5_hauppauge_new_map);
-}
-
-module_init(init_rc_map_rc5_hauppauge_new)
-module_exit(exit_rc_map_rc5_hauppauge_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
index e4f8eac7f7173b1e72bb2baee585ce70d4b1f01f..eedefce86fcfd96db49cd2dff633ae55a6979b84 100644 (file)
@@ -186,7 +186,7 @@ static const struct mceusb_model mceusb_model[] = {
                 * remotes, but we should have something handy,
                 * to allow testing it
                 */
-               .rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
+               .rc_map = RC_MAP_HAUPPAUGE,
                .name = "Conexant Hybrid TV (cx231xx) MCE IR",
        },
        [CX_HYBRID_TV] = {
index 199b9964bbe5ab27776b9dd2f9d2d59dd96c9a2b..e97cafd839846ed89d63e5ea0391af97ae990320 100644 (file)
@@ -264,7 +264,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
                driver_type = RC_DRIVER_IR_RAW;
                allowed_protos = RC_TYPE_ALL;
                /* The grey Hauppauge RC-5 remote */
-               rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
+               rc_map = RC_MAP_HAUPPAUGE;
                break;
        case CX23885_BOARD_TEVII_S470:
                /* Integrated CX23885 IR controller */
index 87f77a34eeabd092a678208dcac815caf0c230cc..aa4f45e692e62cba96149835785c1a1bef6c2e6f 100644 (file)
@@ -911,7 +911,7 @@ struct em28xx_board em28xx_boards[] = {
                .mts_firmware   = 1,
                .has_dvb        = 1,
                .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
-               .ir_codes       = RC_MAP_RC5_HAUPPAUGE_NEW,
+               .ir_codes       = RC_MAP_HAUPPAUGE,
                .decoder        = EM28XX_TVP5150,
                .input          = { {
                        .type     = EM28XX_VMUX_TELEVISION,
@@ -2430,7 +2430,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
                dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
                break;
        case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
-               dev->init_data.ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW;
+               dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
                dev->init_data.get_key = em28xx_get_key_em_haup;
                dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
                break;
index d843afc7c9e62ef9288c18d2c1397dc9e4eed31f..9184751f19c0acf803ea69a10da560e0a0307545 100644 (file)
@@ -94,7 +94,7 @@ void rc_map_init(void);
 #define RC_MAP_GADMEI_RM008Z             "rc-gadmei-rm008z"
 #define RC_MAP_GENIUS_TVGO_A11MCE        "rc-genius-tvgo-a11mce"
 #define RC_MAP_GOTVIEW7135               "rc-gotview7135"
-#define RC_MAP_HAUPPAUGE_NEW             "rc-hauppauge-new"
+#define RC_MAP_HAUPPAUGE_NEW             "rc-hauppauge"
 #define RC_MAP_IMON_MCE                  "rc-imon-mce"
 #define RC_MAP_IMON_PAD                  "rc-imon-pad"
 #define RC_MAP_IODATA_BCTV7E             "rc-iodata-bctv7e"
@@ -125,7 +125,7 @@ void rc_map_init(void);
 #define RC_MAP_PROTEUS_2309              "rc-proteus-2309"
 #define RC_MAP_PURPLETV                  "rc-purpletv"
 #define RC_MAP_PV951                     "rc-pv951"
-#define RC_MAP_RC5_HAUPPAUGE_NEW         "rc-rc5-hauppauge-new"
+#define RC_MAP_HAUPPAUGE                 "rc-hauppauge"
 #define RC_MAP_RC5_TV                    "rc-rc5-tv"
 #define RC_MAP_RC6_MCE                   "rc-rc6-mce"
 #define RC_MAP_REAL_AUDIO_220_32_KEYS    "rc-real-audio-220-32-keys"