static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
-static inline int ieee80211_put_snap(u8 * data, u16 h_proto)
+static inline int ieee80211_copy_snap(u8 * data, u16 h_proto)
{
struct ieee80211_snap_hdr *snap;
u8 *oui;
/* To encrypt, frame format is:
* IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
-
- // PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
- /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
- * call both MSDU and MPDU encryption functions from here. */
atomic_inc(&crypt->refcnt);
res = 0;
- if (crypt->ops->encrypt_msdu)
- res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv);
- if (res == 0 && crypt->ops->encrypt_mpdu)
+ if (crypt->ops->encrypt_mpdu)
res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv);
atomic_dec(&crypt->refcnt);
return txb;
}
-/* Incoming skb is converted to a txb which consist of
+/* Incoming skb is converted to a txb which consists of
* a block of 802.11 fragment packets (stored as skbs) */
int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
rts_required;
unsigned long flags;
struct net_device_stats *stats = &ieee->stats;
- int ether_type, encrypt, host_encrypt;
+ int ether_type, encrypt, host_encrypt, host_encrypt_msdu;
int bytes, fc, hdr_len;
struct sk_buff *skb_frag;
struct ieee80211_hdr_3addr header = { /* Ensure zero initialized */
.seq_ctl = 0
};
u8 dest[ETH_ALEN], src[ETH_ALEN];
-
struct ieee80211_crypt_data *crypt;
+ int snapped = 0;
spin_lock_irqsave(&ieee->lock, flags);
encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) &&
ieee->sec.encrypt;
host_encrypt = ieee->host_encrypt && encrypt;
+ host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt;
if (!encrypt && ieee->ieee802_1x &&
ieee->drop_unencrypted && ether_type != ETH_P_PAE) {
if (ieee->iw_mode == IW_MODE_INFRA) {
fc |= IEEE80211_FCTL_TODS;
- /* To DS: Addr1 = BSSID, Addr2 = SA,
- Addr3 = DA */
+ /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
memcpy(header.addr1, ieee->bssid, ETH_ALEN);
memcpy(header.addr2, src, ETH_ALEN);
memcpy(header.addr3, dest, ETH_ALEN);
} else if (ieee->iw_mode == IW_MODE_ADHOC) {
- /* not From/To DS: Addr1 = DA, Addr2 = SA,
- Addr3 = BSSID */
+ /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */
memcpy(header.addr1, dest, ETH_ALEN);
memcpy(header.addr2, src, ETH_ALEN);
memcpy(header.addr3, ieee->bssid, ETH_ALEN);
header.frame_ctl = cpu_to_le16(fc);
hdr_len = IEEE80211_3ADDR_LEN;
- /* Determine fragmentation size based on destination (multicast
- * and broadcast are not fragmented) */
- if (is_multicast_ether_addr(dest) || is_broadcast_ether_addr(dest))
- frag_size = MAX_FRAG_THRESHOLD;
- else
- frag_size = ieee->fts;
+ /* Encrypt msdu first on the whole data packet. */
+ if ((host_encrypt || host_encrypt_msdu) &&
+ crypt && crypt->ops && crypt->ops->encrypt_msdu) {
+ int res = 0;
+ int len = bytes + hdr_len + crypt->ops->extra_msdu_prefix_len +
+ crypt->ops->extra_msdu_postfix_len;
+ struct sk_buff *skb_new = dev_alloc_skb(len);
+ if (unlikely(!skb_new))
+ goto failed;
+ skb_reserve(skb_new, crypt->ops->extra_msdu_prefix_len);
+ memcpy(skb_put(skb_new, hdr_len), &header, hdr_len);
+ snapped = 1;
+ ieee80211_copy_snap(skb_put(skb_new, SNAP_SIZE + sizeof(u16)),
+ ether_type);
+ memcpy(skb_put(skb_new, skb->len), skb->data, skb->len);
+ res = crypt->ops->encrypt_msdu(skb_new, hdr_len, crypt->priv);
+ if (res < 0) {
+ IEEE80211_ERROR("msdu encryption failed\n");
+ dev_kfree_skb_any(skb_new);
+ goto failed;
+ }
+ dev_kfree_skb_any(skb);
+ skb = skb_new;
+ bytes += crypt->ops->extra_msdu_prefix_len +
+ crypt->ops->extra_msdu_postfix_len;
+ skb_pull(skb, hdr_len);
+ }
- /* Determine amount of payload per fragment. Regardless of if
- * this stack is providing the full 802.11 header, one will
- * eventually be affixed to this fragment -- so we must account for
- * it when determining the amount of payload space. */
- bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN;
- if (ieee->config &
- (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
- bytes_per_frag -= IEEE80211_FCS_LEN;
+ if (host_encrypt || ieee->host_open_frag) {
+ /* Determine fragmentation size based on destination (multicast
+ * and broadcast are not fragmented) */
+ if (is_multicast_ether_addr(dest))
+ frag_size = MAX_FRAG_THRESHOLD;
+ else
+ frag_size = ieee->fts;
+
+ /* Determine amount of payload per fragment. Regardless of if
+ * this stack is providing the full 802.11 header, one will
+ * eventually be affixed to this fragment -- so we must account
+ * for it when determining the amount of payload space. */
+ bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN;
+ if (ieee->config &
+ (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ bytes_per_frag -= IEEE80211_FCS_LEN;
- /* Each fragment may need to have room for encryptiong pre/postfix */
- if (host_encrypt)
- bytes_per_frag -= crypt->ops->extra_prefix_len +
- crypt->ops->extra_postfix_len;
-
- /* Number of fragments is the total bytes_per_frag /
- * payload_per_fragment */
- nr_frags = bytes / bytes_per_frag;
- bytes_last_frag = bytes % bytes_per_frag;
- if (bytes_last_frag)
- nr_frags++;
- else
- bytes_last_frag = bytes_per_frag;
+ /* Each fragment may need to have room for encryptiong
+ * pre/postfix */
+ if (host_encrypt)
+ bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
+ crypt->ops->extra_mpdu_postfix_len;
+
+ /* Number of fragments is the total
+ * bytes_per_frag / payload_per_fragment */
+ nr_frags = bytes / bytes_per_frag;
+ bytes_last_frag = bytes % bytes_per_frag;
+ if (bytes_last_frag)
+ nr_frags++;
+ else
+ bytes_last_frag = bytes_per_frag;
+ } else {
+ nr_frags = 1;
+ bytes_per_frag = bytes_last_frag = bytes;
+ frag_size = bytes + IEEE80211_3ADDR_LEN;
+ }
rts_required = (frag_size > ieee->rts
&& ieee->config & CFG_IEEE80211_RTS);
if (rts_required)
nr_frags++;
- else
- bytes_last_frag = bytes_per_frag;
/* When we allocate the TXB we allocate enough space for the reserve
* and full fragment bytes (bytes_per_frag doesn't include prefix,
goto failed;
}
txb->encrypted = encrypt;
- txb->payload_size = bytes;
+ if (host_encrypt)
+ txb->payload_size = frag_size * (nr_frags - 1) +
+ bytes_last_frag;
+ else
+ txb->payload_size = bytes;
if (rts_required) {
skb_frag = txb->fragments[0];
skb_frag = txb->fragments[i];
if (host_encrypt)
- skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
+ skb_reserve(skb_frag,
+ crypt->ops->extra_mpdu_prefix_len);
frag_hdr =
(struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len);
bytes = bytes_last_frag;
}
- /* Put a SNAP header on the first fragment */
- if (i == 0) {
- ieee80211_put_snap(skb_put
- (skb_frag, SNAP_SIZE + sizeof(u16)),
- ether_type);
+ if (i == 0 && !snapped) {
+ ieee80211_copy_snap(skb_put
+ (skb_frag, SNAP_SIZE + sizeof(u16)),
+ ether_type);
bytes -= SNAP_SIZE + sizeof(u16);
}
if (host_encrypt)
ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
- /* ipw2200/2915 Hardware encryption doesn't support TKIP MIC */
- if (!ieee->host_encrypt && encrypt &&
- (ieee->sec.level == SEC_LEVEL_2) &&
- crypt && crypt->ops && crypt->ops->encrypt_msdu) {
- int res = 0;
- res = crypt->ops->encrypt_msdu(skb_frag, hdr_len,
- crypt->priv);
- if (res < 0) {
- IEEE80211_ERROR("TKIP MIC encryption failed\n");
- goto failed;
- }
- }
-
if (ieee->config &
(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
skb_put(skb_frag, 4);
dev_kfree_skb_any(skb);
if (txb) {
- if ((*ieee->hard_start_xmit) (txb, dev) == 0) {
+ int ret = (*ieee->hard_start_xmit) (txb, dev);
+ if (ret == 0) {
stats->tx_packets++;
stats->tx_bytes += txb->payload_size;
return 0;
projects / ~emulex / infiniband.git / commitdiff