obj-$(CONFIG_85xx) += 85xx/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
+obj-$(CONFIG_PPC_MAPLE) += maple/
--- /dev/null
+obj-y += setup.o pci.o time.o
--- /dev/null
+/*
+ * Declarations for maple-specific code.
+ *
+ * Maple is the name of a PPC970 evaluation board.
+ */
+extern int maple_set_rtc_time(struct rtc_time *tm);
+extern void maple_get_rtc_time(struct rtc_time *tm);
+extern unsigned long maple_get_boot_time(void);
+extern void maple_calibrate_decr(void);
+extern void maple_pci_init(void);
+extern void maple_pcibios_fixup(void);
+extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
--- /dev/null
+/*
+ * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/iommu.h>
+#include <asm/ppc-pci.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static struct pci_controller *u3_agp, *u3_ht;
+
+static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+ for (; node != 0;node = node->sibling) {
+ int * bus_range;
+ unsigned int *class_code;
+ int len;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down */
+ class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ bus_range = (int *) get_property(node, "bus-range", &len);
+ if (bus_range != NULL && len > 2 * sizeof(int)) {
+ if (bus_range[1] > higher)
+ higher = bus_range[1];
+ }
+ higher = fixup_one_level_bus_range(node->child, higher);
+ }
+ return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init fixup_bus_range(struct device_node *bridge)
+{
+ int * bus_range;
+ int len;
+
+ /* Lookup the "bus-range" property for the hose */
+ bus_range = (int *) get_property(bridge, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s\n",
+ bridge->full_name);
+ return;
+ }
+ bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+
+#define U3_AGP_CFA0(devfn, off) \
+ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
+ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
+ | (((unsigned long)(off)) & 0xFCUL))
+
+#define U3_AGP_CFA1(bus, devfn, off) \
+ ((((unsigned long)(bus)) << 16) \
+ |(((unsigned long)(devfn)) << 8) \
+ |(((unsigned long)(off)) & 0xFCUL) \
+ |1UL)
+
+static unsigned long u3_agp_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, u8 offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ if (dev_fn < (11 << 3))
+ return 0;
+ caddr = U3_AGP_CFA0(dev_fn, offset);
+ } else
+ caddr = U3_AGP_CFA1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x07;
+ return ((unsigned long)hose->cfg_data) + offset;
+}
+
+static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)addr);
+ break;
+ case 2:
+ *val = in_le16((u16 *)addr);
+ break;
+ default:
+ *val = in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8((u8 *)addr, val);
+ (void) in_8((u8 *)addr);
+ break;
+ case 2:
+ out_le16((u16 *)addr, val);
+ (void) in_le16((u16 *)addr);
+ break;
+ default:
+ out_le32((u32 *)addr, val);
+ (void) in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_agp_pci_ops =
+{
+ u3_agp_read_config,
+ u3_agp_write_config
+};
+
+
+#define U3_HT_CFA0(devfn, off) \
+ ((((unsigned long)devfn) << 8) | offset)
+#define U3_HT_CFA1(bus, devfn, off) \
+ (U3_HT_CFA0(devfn, off) \
+ + (((unsigned long)bus) << 16) \
+ + 0x01000000UL)
+
+static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 devfn, u8 offset)
+{
+ if (bus == hose->first_busno) {
+ if (PCI_SLOT(devfn) == 0)
+ return 0;
+ return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
+ } else
+ return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
+}
+
+static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)addr);
+ break;
+ case 2:
+ *val = in_le16((u16 *)addr);
+ break;
+ default:
+ *val = in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8((u8 *)addr, val);
+ (void) in_8((u8 *)addr);
+ break;
+ case 2:
+ out_le16((u16 *)addr, val);
+ (void) in_le16((u16 *)addr);
+ break;
+ default:
+ out_le32((u32 *)addr, val);
+ (void) in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+ u3_ht_read_config,
+ u3_ht_write_config
+};
+
+static void __init setup_u3_agp(struct pci_controller* hose)
+{
+ /* On G5, we move AGP up to high bus number so we don't need
+ * to reassign bus numbers for HT. If we ever have P2P bridges
+ * on AGP, we'll have to move pci_assign_all_buses to the
+ * pci_controller structure so we enable it for AGP and not for
+ * HT childs.
+ * We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->first_busno = 0xf0;
+ hose->last_busno = 0xff;
+ hose->ops = &u3_agp_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u3_agp = hose;
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+ hose->ops = &u3_ht_pci_ops;
+
+ /* We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xef;
+
+ u3_ht = hose;
+}
+
+static int __init add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ char* disp_name;
+ int *bus_range;
+ int primary = 1;
+ struct property *of_prop;
+
+ DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
+ dev->full_name);
+ }
+
+ hose = alloc_bootmem(sizeof(struct pci_controller));
+ if (hose == NULL)
+ return -ENOMEM;
+ pci_setup_pci_controller(hose);
+
+ hose->arch_data = dev;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ of_prop = alloc_bootmem(sizeof(struct property) +
+ sizeof(hose->global_number));
+ if (of_prop) {
+ memset(of_prop, 0, sizeof(struct property));
+ of_prop->name = "linux,pci-domain";
+ of_prop->length = sizeof(hose->global_number);
+ of_prop->value = (unsigned char *)&of_prop[1];
+ memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
+ prom_add_property(dev, of_prop);
+ }
+
+ disp_name = NULL;
+ if (device_is_compatible(dev, "u3-agp")) {
+ setup_u3_agp(hose);
+ disp_name = "U3-AGP";
+ primary = 0;
+ } else if (device_is_compatible(dev, "u3-ht")) {
+ setup_u3_ht(hose);
+ disp_name = "U3-HT";
+ primary = 1;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
+ disp_name, hose->first_busno, hose->last_busno);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+ pci_setup_phb_io(hose, primary);
+
+ /* Fixup "bus-range" OF property */
+ fixup_bus_range(dev);
+
+ return 0;
+}
+
+
+void __init maple_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ DBG(" -> maple_pcibios_fixup\n");
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+
+ /* Do the mapping of the IO space */
+ phbs_remap_io();
+
+ DBG(" <- maple_pcibios_fixup\n");
+}
+
+static void __init maple_fixup_phb_resources(void)
+{
+ struct pci_controller *hose, *tmp;
+
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
+ hose->io_resource.start += offset;
+ hose->io_resource.end += offset;
+ printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
+ hose->global_number,
+ hose->io_resource.start, hose->io_resource.end);
+ }
+}
+
+void __init maple_pci_init(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht = NULL;
+
+ /* Probe root PCI hosts, that is on U3 the AGP host and the
+ * HyperTransport host. That one is actually "kept" around
+ * and actually added last as it's resource management relies
+ * on the AGP resources to have been setup first
+ */
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
+ return;
+ }
+ for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+ if (np->name == NULL)
+ continue;
+ if (strcmp(np->name, "pci") == 0) {
+ if (add_bridge(np) == 0)
+ of_node_get(np);
+ }
+ if (strcmp(np->name, "ht") == 0) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+ /* Now setup the HyperTransport host if we found any
+ */
+ if (ht && add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ /* Fixup the IO resources on our host bridges as the common code
+ * does it only for childs of the host bridges
+ */
+ maple_fixup_phb_resources();
+
+ /* Setup the linkage between OF nodes and PHBs */
+ pci_devs_phb_init();
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ if (u3_agp) {
+ struct device_node *np = u3_agp->arch_data;
+ PCI_DN(np)->busno = 0xf0;
+ for (np = np->child; np; np = np->sibling)
+ PCI_DN(np)->busno = 0xf0;
+ }
+
+ /* Tell pci.c to use the common resource allocation mecanism */
+ pci_probe_only = 0;
+
+ /* Allow all IO */
+ io_page_mask = -1;
+}
+
+int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
+{
+ struct device_node *np;
+ int irq = channel ? 15 : 14;
+
+ if (pdev->vendor != PCI_VENDOR_ID_AMD ||
+ pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
+ return irq;
+
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL)
+ return irq;
+ if (np->n_intrs < 2)
+ return irq;
+ return np->intrs[channel & 0x1].line;
+}
+
+/* XXX: To remove once all firmwares are ok */
+static void fixup_maple_ide(struct pci_dev* dev)
+{
+#if 0 /* Enable this to enable IDE port 0 */
+ {
+ u8 v;
+
+ pci_read_config_byte(dev, 0x40, &v);
+ v |= 2;
+ pci_write_config_byte(dev, 0x40, v);
+ }
+#endif
+#if 0 /* fix bus master base */
+ pci_write_config_dword(dev, 0x20, 0xcc01);
+ printk("old ide resource: %lx -> %lx \n",
+ dev->resource[4].start, dev->resource[4].end);
+ dev->resource[4].start = 0xcc00;
+ dev->resource[4].end = 0xcc10;
+#endif
+#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
+ {
+ struct pci_dev *apicdev;
+ u32 v;
+
+ apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
+ if (apicdev == NULL)
+ printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
+ else {
+ pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
+ pci_read_config_dword(apicdev, 0xf4, &v);
+ v &= ~0x00000022;
+ pci_write_config_dword(apicdev, 0xf4, v);
+ pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
+ pci_read_config_dword(apicdev, 0xf4, &v);
+ v &= ~0x00000022;
+ pci_write_config_dword(apicdev, 0xf4, v);
+ pci_dev_put(apicdev);
+ }
+ }
+#endif
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
+ fixup_maple_ide);
--- /dev/null
+/*
+ * Maple (970 eval board) setup code
+ *
+ * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/of_device.h>
+#include <asm/lmb.h>
+#include <asm/mpic.h>
+#include <asm/udbg.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+extern void generic_find_legacy_serial_ports(u64 *physport,
+ unsigned int *default_speed);
+
+static void maple_restart(char *cmd)
+{
+ unsigned int maple_nvram_base;
+ unsigned int maple_nvram_offset;
+ unsigned int maple_nvram_command;
+ struct device_node *rtcs;
+
+ /* find NVRAM device */
+ rtcs = find_compatible_devices("nvram", "AMD8111");
+ if (rtcs && rtcs->addrs) {
+ maple_nvram_base = rtcs->addrs[0].address;
+ } else {
+ printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+ printk(KERN_EMERG "Maple: Manual Restart Required\n");
+ return;
+ }
+
+ /* find service processor device */
+ rtcs = find_devices("service-processor");
+ if (!rtcs) {
+ printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+ printk(KERN_EMERG "Maple: Manual Restart Required\n");
+ return;
+ }
+ maple_nvram_offset = *(unsigned int*) get_property(rtcs,
+ "restart-addr", NULL);
+ maple_nvram_command = *(unsigned int*) get_property(rtcs,
+ "restart-value", NULL);
+
+ /* send command */
+ outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
+ for (;;) ;
+}
+
+static void maple_power_off(void)
+{
+ unsigned int maple_nvram_base;
+ unsigned int maple_nvram_offset;
+ unsigned int maple_nvram_command;
+ struct device_node *rtcs;
+
+ /* find NVRAM device */
+ rtcs = find_compatible_devices("nvram", "AMD8111");
+ if (rtcs && rtcs->addrs) {
+ maple_nvram_base = rtcs->addrs[0].address;
+ } else {
+ printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+ printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+ return;
+ }
+
+ /* find service processor device */
+ rtcs = find_devices("service-processor");
+ if (!rtcs) {
+ printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+ printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+ return;
+ }
+ maple_nvram_offset = *(unsigned int*) get_property(rtcs,
+ "power-off-addr", NULL);
+ maple_nvram_command = *(unsigned int*) get_property(rtcs,
+ "power-off-value", NULL);
+
+ /* send command */
+ outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
+ for (;;) ;
+}
+
+static void maple_halt(void)
+{
+ maple_power_off();
+}
+
+#ifdef CONFIG_SMP
+struct smp_ops_t maple_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .kick_cpu = smp_generic_kick_cpu,
+ .setup_cpu = smp_mpic_setup_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+#endif /* CONFIG_SMP */
+
+void __init maple_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ smp_ops = &maple_smp_ops;
+#endif
+ /* Lookup PCI hosts */
+ maple_pci_init();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+ printk(KERN_INFO "Using native/NAP idle loop\n");
+}
+
+/*
+ * Early initialization.
+ */
+static void __init maple_init_early(void)
+{
+ unsigned int default_speed;
+ u64 physport;
+
+ DBG(" -> maple_init_early\n");
+
+ /* Initialize hash table, from now on, we can take hash faults
+ * and call ioremap
+ */
+ hpte_init_native();
+
+ /* Find the serial port */
+ generic_find_legacy_serial_ports(&physport, &default_speed);
+
+ DBG("phys port addr: %lx\n", (long)physport);
+
+ if (physport) {
+ void *comport;
+ /* Map the uart for udbg. */
+ comport = (void *)ioremap(physport, 16);
+ udbg_init_uart(comport, default_speed);
+
+ DBG("Hello World !\n");
+ }
+
+ /* Setup interrupt mapping options */
+ ppc64_interrupt_controller = IC_OPEN_PIC;
+
+ iommu_init_early_u3();
+
+ DBG(" <- maple_init_early\n");
+}
+
+
+static __init void maple_init_IRQ(void)
+{
+ struct device_node *root;
+ unsigned int *opprop;
+ unsigned long opic_addr;
+ struct mpic *mpic;
+ unsigned char senses[128];
+ int n;
+
+ DBG(" -> maple_init_IRQ\n");
+
+ /* XXX: Non standard, replace that with a proper openpic/mpic node
+ * in the device-tree. Find the Open PIC if present */
+ root = of_find_node_by_path("/");
+ opprop = (unsigned int *) get_property(root,
+ "platform-open-pic", NULL);
+ if (opprop == 0)
+ panic("OpenPIC not found !\n");
+
+ n = prom_n_addr_cells(root);
+ for (opic_addr = 0; n > 0; --n)
+ opic_addr = (opic_addr << 32) + *opprop++;
+ of_node_put(root);
+
+ /* Obtain sense values from device-tree */
+ prom_get_irq_senses(senses, 0, 128);
+
+ mpic = mpic_alloc(opic_addr,
+ MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_U3 | MPIC_WANTS_RESET,
+ 0, 0, 128, 128, senses, 128, "U3-MPIC");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+
+ DBG(" <- maple_init_IRQ\n");
+}
+
+static void __init maple_progress(char *s, unsigned short hex)
+{
+ printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init maple_probe(int platform)
+{
+ if (platform != PLATFORM_MAPLE)
+ return 0;
+ /*
+ * On U3, the DART (iommu) must be allocated now since it
+ * has an impact on htab_initialize (due to the large page it
+ * occupies having to be broken up so the DART itself is not
+ * part of the cacheable linar mapping
+ */
+ alloc_u3_dart_table();
+
+ return 1;
+}
+
+struct machdep_calls __initdata maple_md = {
+ .probe = maple_probe,
+ .setup_arch = maple_setup_arch,
+ .init_early = maple_init_early,
+ .init_IRQ = maple_init_IRQ,
+ .get_irq = mpic_get_irq,
+ .pcibios_fixup = maple_pcibios_fixup,
+ .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
+ .restart = maple_restart,
+ .power_off = maple_power_off,
+ .halt = maple_halt,
+ .get_boot_time = maple_get_boot_time,
+ .set_rtc_time = maple_set_rtc_time,
+ .get_rtc_time = maple_get_rtc_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = maple_progress,
+ .idle_loop = native_idle,
+};
--- /dev/null
+/*
+ * arch/ppc64/kernel/maple_time.c
+ *
+ * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern void GregorianDay(struct rtc_time * tm);
+
+static int maple_rtc_addr;
+
+static int maple_clock_read(int addr)
+{
+ outb_p(addr, maple_rtc_addr);
+ return inb_p(maple_rtc_addr+1);
+}
+
+static void maple_clock_write(unsigned long val, int addr)
+{
+ outb_p(addr, maple_rtc_addr);
+ outb_p(val, maple_rtc_addr+1);
+}
+
+void maple_get_rtc_time(struct rtc_time *tm)
+{
+ int uip, i;
+
+ /* The Linux interpretation of the CMOS clock register contents:
+ * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+ * RTC registers show the second which has precisely just started.
+ * Let's hope other operating systems interpret the RTC the same way.
+ */
+
+ /* Since the UIP flag is set for about 2.2 ms and the clock
+ * is typically written with a precision of 1 jiffy, trying
+ * to obtain a precision better than a few milliseconds is
+ * an illusion. Only consistency is interesting, this also
+ * allows to use the routine for /dev/rtc without a potential
+ * 1 second kernel busy loop triggered by any reader of /dev/rtc.
+ */
+
+ for (i = 0; i<1000000; i++) {
+ uip = maple_clock_read(RTC_FREQ_SELECT);
+ tm->tm_sec = maple_clock_read(RTC_SECONDS);
+ tm->tm_min = maple_clock_read(RTC_MINUTES);
+ tm->tm_hour = maple_clock_read(RTC_HOURS);
+ tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH);
+ tm->tm_mon = maple_clock_read(RTC_MONTH);
+ tm->tm_year = maple_clock_read(RTC_YEAR);
+ uip |= maple_clock_read(RTC_FREQ_SELECT);
+ if ((uip & RTC_UIP)==0)
+ break;
+ }
+
+ if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
+ || RTC_ALWAYS_BCD) {
+ BCD_TO_BIN(tm->tm_sec);
+ BCD_TO_BIN(tm->tm_min);
+ BCD_TO_BIN(tm->tm_hour);
+ BCD_TO_BIN(tm->tm_mday);
+ BCD_TO_BIN(tm->tm_mon);
+ BCD_TO_BIN(tm->tm_year);
+ }
+ if ((tm->tm_year + 1900) < 1970)
+ tm->tm_year += 100;
+
+ GregorianDay(tm);
+}
+
+int maple_set_rtc_time(struct rtc_time *tm)
+{
+ unsigned char save_control, save_freq_select;
+ int sec, min, hour, mon, mday, year;
+
+ spin_lock(&rtc_lock);
+
+ save_control = maple_clock_read(RTC_CONTROL); /* tell the clock it's being set */
+
+ maple_clock_write((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = maple_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
+
+ maple_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ sec = tm->tm_sec;
+ min = tm->tm_min;
+ hour = tm->tm_hour;
+ mon = tm->tm_mon;
+ mday = tm->tm_mday;
+ year = tm->tm_year;
+
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(sec);
+ BIN_TO_BCD(min);
+ BIN_TO_BCD(hour);
+ BIN_TO_BCD(mon);
+ BIN_TO_BCD(mday);
+ BIN_TO_BCD(year);
+ }
+ maple_clock_write(sec, RTC_SECONDS);
+ maple_clock_write(min, RTC_MINUTES);
+ maple_clock_write(hour, RTC_HOURS);
+ maple_clock_write(mon, RTC_MONTH);
+ maple_clock_write(mday, RTC_DAY_OF_MONTH);
+ maple_clock_write(year, RTC_YEAR);
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ maple_clock_write(save_control, RTC_CONTROL);
+ maple_clock_write(save_freq_select, RTC_FREQ_SELECT);
+
+ spin_unlock(&rtc_lock);
+
+ return 0;
+}
+
+unsigned long __init maple_get_boot_time(void)
+{
+ struct rtc_time tm;
+ struct device_node *rtcs;
+
+ rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
+ if (rtcs && rtcs->addrs) {
+ maple_rtc_addr = rtcs->addrs[0].address;
+ printk(KERN_INFO "Maple: Found RTC at 0x%x\n", maple_rtc_addr);
+ } else {
+ maple_rtc_addr = RTC_PORT(0); /* legacy address */
+ printk(KERN_INFO "Maple: No device node for RTC, assuming "
+ "legacy address (0x%x)\n", maple_rtc_addr);
+ }
+
+ maple_get_rtc_time(&tm);
+ return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
obj-$(CONFIG_PPC_PMAC) += udbg_scc.o
-obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
- udbg_16550.o
+obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
ifdef CONFIG_SMP
obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o
+++ /dev/null
-/*
- * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
- * IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/iommu.h>
-#include <asm/ppc-pci.h>
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-static struct pci_controller *u3_agp, *u3_ht;
-
-static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
-{
- for (; node != 0;node = node->sibling) {
- int * bus_range;
- unsigned int *class_code;
- int len;
-
- /* For PCI<->PCI bridges or CardBus bridges, we go down */
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
- continue;
- bus_range = (int *) get_property(node, "bus-range", &len);
- if (bus_range != NULL && len > 2 * sizeof(int)) {
- if (bus_range[1] > higher)
- higher = bus_range[1];
- }
- higher = fixup_one_level_bus_range(node->child, higher);
- }
- return higher;
-}
-
-/* This routine fixes the "bus-range" property of all bridges in the
- * system since they tend to have their "last" member wrong on macs
- *
- * Note that the bus numbers manipulated here are OF bus numbers, they
- * are not Linux bus numbers.
- */
-static void __init fixup_bus_range(struct device_node *bridge)
-{
- int * bus_range;
- int len;
-
- /* Lookup the "bus-range" property for the hose */
- bus_range = (int *) get_property(bridge, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s\n",
- bridge->full_name);
- return;
- }
- bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
-}
-
-
-#define U3_AGP_CFA0(devfn, off) \
- ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
- | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
- | (((unsigned long)(off)) & 0xFCUL))
-
-#define U3_AGP_CFA1(bus, devfn, off) \
- ((((unsigned long)(bus)) << 16) \
- |(((unsigned long)(devfn)) << 8) \
- |(((unsigned long)(off)) & 0xFCUL) \
- |1UL)
-
-static unsigned long u3_agp_cfg_access(struct pci_controller* hose,
- u8 bus, u8 dev_fn, u8 offset)
-{
- unsigned int caddr;
-
- if (bus == hose->first_busno) {
- if (dev_fn < (11 << 3))
- return 0;
- caddr = U3_AGP_CFA0(dev_fn, offset);
- } else
- caddr = U3_AGP_CFA1(bus, dev_fn, offset);
-
- /* Uninorth will return garbage if we don't read back the value ! */
- do {
- out_le32(hose->cfg_addr, caddr);
- } while (in_le32(hose->cfg_addr) != caddr);
-
- offset &= 0x07;
- return ((unsigned long)hose->cfg_data) + offset;
-}
-
-static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- *val = in_8((u8 *)addr);
- break;
- case 2:
- *val = in_le16((u16 *)addr);
- break;
- default:
- *val = in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
- break;
- case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
- break;
- default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops u3_agp_pci_ops =
-{
- u3_agp_read_config,
- u3_agp_write_config
-};
-
-
-#define U3_HT_CFA0(devfn, off) \
- ((((unsigned long)devfn) << 8) | offset)
-#define U3_HT_CFA1(bus, devfn, off) \
- (U3_HT_CFA0(devfn, off) \
- + (((unsigned long)bus) << 16) \
- + 0x01000000UL)
-
-static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
- u8 bus, u8 devfn, u8 offset)
-{
- if (bus == hose->first_busno) {
- if (PCI_SLOT(devfn) == 0)
- return 0;
- return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
- } else
- return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
-}
-
-static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- *val = in_8((u8 *)addr);
- break;
- case 2:
- *val = in_le16((u16 *)addr);
- break;
- default:
- *val = in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
- break;
- case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
- break;
- default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops u3_ht_pci_ops =
-{
- u3_ht_read_config,
- u3_ht_write_config
-};
-
-static void __init setup_u3_agp(struct pci_controller* hose)
-{
- /* On G5, we move AGP up to high bus number so we don't need
- * to reassign bus numbers for HT. If we ever have P2P bridges
- * on AGP, we'll have to move pci_assign_all_buses to the
- * pci_controller structure so we enable it for AGP and not for
- * HT childs.
- * We hard code the address because of the different size of
- * the reg address cell, we shall fix that by killing struct
- * reg_property and using some accessor functions instead
- */
- hose->first_busno = 0xf0;
- hose->last_busno = 0xff;
- hose->ops = &u3_agp_pci_ops;
- hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
- hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
-
- u3_agp = hose;
-}
-
-static void __init setup_u3_ht(struct pci_controller* hose)
-{
- hose->ops = &u3_ht_pci_ops;
-
- /* We hard code the address because of the different size of
- * the reg address cell, we shall fix that by killing struct
- * reg_property and using some accessor functions instead
- */
- hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
-
- hose->first_busno = 0;
- hose->last_busno = 0xef;
-
- u3_ht = hose;
-}
-
-static int __init add_bridge(struct device_node *dev)
-{
- int len;
- struct pci_controller *hose;
- char* disp_name;
- int *bus_range;
- int primary = 1;
- struct property *of_prop;
-
- DBG("Adding PCI host bridge %s\n", dev->full_name);
-
- bus_range = (int *) get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
- dev->full_name);
- }
-
- hose = alloc_bootmem(sizeof(struct pci_controller));
- if (hose == NULL)
- return -ENOMEM;
- pci_setup_pci_controller(hose);
-
- hose->arch_data = dev;
- hose->first_busno = bus_range ? bus_range[0] : 0;
- hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
- of_prop = alloc_bootmem(sizeof(struct property) +
- sizeof(hose->global_number));
- if (of_prop) {
- memset(of_prop, 0, sizeof(struct property));
- of_prop->name = "linux,pci-domain";
- of_prop->length = sizeof(hose->global_number);
- of_prop->value = (unsigned char *)&of_prop[1];
- memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
- prom_add_property(dev, of_prop);
- }
-
- disp_name = NULL;
- if (device_is_compatible(dev, "u3-agp")) {
- setup_u3_agp(hose);
- disp_name = "U3-AGP";
- primary = 0;
- } else if (device_is_compatible(dev, "u3-ht")) {
- setup_u3_ht(hose);
- disp_name = "U3-HT";
- primary = 1;
- }
- printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
- disp_name, hose->first_busno, hose->last_busno);
-
- /* Interpret the "ranges" property */
- /* This also maps the I/O region and sets isa_io/mem_base */
- pci_process_bridge_OF_ranges(hose, dev, primary);
- pci_setup_phb_io(hose, primary);
-
- /* Fixup "bus-range" OF property */
- fixup_bus_range(dev);
-
- return 0;
-}
-
-
-void __init maple_pcibios_fixup(void)
-{
- struct pci_dev *dev = NULL;
-
- DBG(" -> maple_pcibios_fixup\n");
-
- for_each_pci_dev(dev)
- pci_read_irq_line(dev);
-
- /* Do the mapping of the IO space */
- phbs_remap_io();
-
- DBG(" <- maple_pcibios_fixup\n");
-}
-
-static void __init maple_fixup_phb_resources(void)
-{
- struct pci_controller *hose, *tmp;
-
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
- hose->io_resource.start += offset;
- hose->io_resource.end += offset;
- printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
- hose->global_number,
- hose->io_resource.start, hose->io_resource.end);
- }
-}
-
-void __init maple_pci_init(void)
-{
- struct device_node *np, *root;
- struct device_node *ht = NULL;
-
- /* Probe root PCI hosts, that is on U3 the AGP host and the
- * HyperTransport host. That one is actually "kept" around
- * and actually added last as it's resource management relies
- * on the AGP resources to have been setup first
- */
- root = of_find_node_by_path("/");
- if (root == NULL) {
- printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
- return;
- }
- for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
- if (np->name == NULL)
- continue;
- if (strcmp(np->name, "pci") == 0) {
- if (add_bridge(np) == 0)
- of_node_get(np);
- }
- if (strcmp(np->name, "ht") == 0) {
- of_node_get(np);
- ht = np;
- }
- }
- of_node_put(root);
-
- /* Now setup the HyperTransport host if we found any
- */
- if (ht && add_bridge(ht) != 0)
- of_node_put(ht);
-
- /* Fixup the IO resources on our host bridges as the common code
- * does it only for childs of the host bridges
- */
- maple_fixup_phb_resources();
-
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->arch_data;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
-
- /* Tell pci.c to use the common resource allocation mecanism */
- pci_probe_only = 0;
-
- /* Allow all IO */
- io_page_mask = -1;
-}
-
-int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
-{
- struct device_node *np;
- int irq = channel ? 15 : 14;
-
- if (pdev->vendor != PCI_VENDOR_ID_AMD ||
- pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
- return irq;
-
- np = pci_device_to_OF_node(pdev);
- if (np == NULL)
- return irq;
- if (np->n_intrs < 2)
- return irq;
- return np->intrs[channel & 0x1].line;
-}
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
-#if 0 /* Enable this to enable IDE port 0 */
- {
- u8 v;
-
- pci_read_config_byte(dev, 0x40, &v);
- v |= 2;
- pci_write_config_byte(dev, 0x40, v);
- }
-#endif
-#if 0 /* fix bus master base */
- pci_write_config_dword(dev, 0x20, 0xcc01);
- printk("old ide resource: %lx -> %lx \n",
- dev->resource[4].start, dev->resource[4].end);
- dev->resource[4].start = 0xcc00;
- dev->resource[4].end = 0xcc10;
-#endif
-#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
- {
- struct pci_dev *apicdev;
- u32 v;
-
- apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
- if (apicdev == NULL)
- printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
- else {
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_dev_put(apicdev);
- }
- }
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
- fixup_maple_ide);
+++ /dev/null
-/*
- * arch/ppc64/kernel/maple_setup.c
- *
- * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
- * IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#define DEBUG
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/vt_kern.h>
-#include <linux/console.h>
-#include <linux/ide.h>
-#include <linux/pci.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/bitops.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/iommu.h>
-#include <asm/machdep.h>
-#include <asm/dma.h>
-#include <asm/cputable.h>
-#include <asm/time.h>
-#include <asm/of_device.h>
-#include <asm/lmb.h>
-#include <asm/mpic.h>
-#include <asm/udbg.h>
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-extern int maple_set_rtc_time(struct rtc_time *tm);
-extern void maple_get_rtc_time(struct rtc_time *tm);
-extern unsigned long maple_get_boot_time(void);
-extern void maple_calibrate_decr(void);
-extern void maple_pci_init(void);
-extern void maple_pcibios_fixup(void);
-extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
-extern void generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed);
-
-static void maple_restart(char *cmd)
-{
- unsigned int maple_nvram_base;
- unsigned int maple_nvram_offset;
- unsigned int maple_nvram_command;
- struct device_node *rtcs;
-
- /* find NVRAM device */
- rtcs = find_compatible_devices("nvram", "AMD8111");
- if (rtcs && rtcs->addrs) {
- maple_nvram_base = rtcs->addrs[0].address;
- } else {
- printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
- printk(KERN_EMERG "Maple: Manual Restart Required\n");
- return;
- }
-
- /* find service processor device */
- rtcs = find_devices("service-processor");
- if (!rtcs) {
- printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
- printk(KERN_EMERG "Maple: Manual Restart Required\n");
- return;
- }
- maple_nvram_offset = *(unsigned int*) get_property(rtcs,
- "restart-addr", NULL);
- maple_nvram_command = *(unsigned int*) get_property(rtcs,
- "restart-value", NULL);
-
- /* send command */
- outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
- for (;;) ;
-}
-
-static void maple_power_off(void)
-{
- unsigned int maple_nvram_base;
- unsigned int maple_nvram_offset;
- unsigned int maple_nvram_command;
- struct device_node *rtcs;
-
- /* find NVRAM device */
- rtcs = find_compatible_devices("nvram", "AMD8111");
- if (rtcs && rtcs->addrs) {
- maple_nvram_base = rtcs->addrs[0].address;
- } else {
- printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
- printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
- return;
- }
-
- /* find service processor device */
- rtcs = find_devices("service-processor");
- if (!rtcs) {
- printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
- printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
- return;
- }
- maple_nvram_offset = *(unsigned int*) get_property(rtcs,
- "power-off-addr", NULL);
- maple_nvram_command = *(unsigned int*) get_property(rtcs,
- "power-off-value", NULL);
-
- /* send command */
- outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
- for (;;) ;
-}
-
-static void maple_halt(void)
-{
- maple_power_off();
-}
-
-#ifdef CONFIG_SMP
-struct smp_ops_t maple_smp_ops = {
- .probe = smp_mpic_probe,
- .message_pass = smp_mpic_message_pass,
- .kick_cpu = smp_generic_kick_cpu,
- .setup_cpu = smp_mpic_setup_cpu,
- .give_timebase = smp_generic_give_timebase,
- .take_timebase = smp_generic_take_timebase,
-};
-#endif /* CONFIG_SMP */
-
-void __init maple_setup_arch(void)
-{
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- /* Setup SMP callback */
-#ifdef CONFIG_SMP
- smp_ops = &maple_smp_ops;
-#endif
- /* Lookup PCI hosts */
- maple_pci_init();
-
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
-
- printk(KERN_INFO "Using native/NAP idle loop\n");
-}
-
-/*
- * Early initialization.
- */
-static void __init maple_init_early(void)
-{
- unsigned int default_speed;
- u64 physport;
-
- DBG(" -> maple_init_early\n");
-
- /* Initialize hash table, from now on, we can take hash faults
- * and call ioremap
- */
- hpte_init_native();
-
- /* Find the serial port */
- generic_find_legacy_serial_ports(&physport, &default_speed);
-
- DBG("phys port addr: %lx\n", (long)physport);
-
- if (physport) {
- void *comport;
- /* Map the uart for udbg. */
- comport = (void *)ioremap(physport, 16);
- udbg_init_uart(comport, default_speed);
-
- DBG("Hello World !\n");
- }
-
- /* Setup interrupt mapping options */
- ppc64_interrupt_controller = IC_OPEN_PIC;
-
- iommu_init_early_u3();
-
- DBG(" <- maple_init_early\n");
-}
-
-
-static __init void maple_init_IRQ(void)
-{
- struct device_node *root;
- unsigned int *opprop;
- unsigned long opic_addr;
- struct mpic *mpic;
- unsigned char senses[128];
- int n;
-
- DBG(" -> maple_init_IRQ\n");
-
- /* XXX: Non standard, replace that with a proper openpic/mpic node
- * in the device-tree. Find the Open PIC if present */
- root = of_find_node_by_path("/");
- opprop = (unsigned int *) get_property(root,
- "platform-open-pic", NULL);
- if (opprop == 0)
- panic("OpenPIC not found !\n");
-
- n = prom_n_addr_cells(root);
- for (opic_addr = 0; n > 0; --n)
- opic_addr = (opic_addr << 32) + *opprop++;
- of_node_put(root);
-
- /* Obtain sense values from device-tree */
- prom_get_irq_senses(senses, 0, 128);
-
- mpic = mpic_alloc(opic_addr,
- MPIC_PRIMARY | MPIC_BIG_ENDIAN |
- MPIC_BROKEN_U3 | MPIC_WANTS_RESET,
- 0, 0, 128, 128, senses, 128, "U3-MPIC");
- BUG_ON(mpic == NULL);
- mpic_init(mpic);
-
- DBG(" <- maple_init_IRQ\n");
-}
-
-static void __init maple_progress(char *s, unsigned short hex)
-{
- printk("*** %04x : %s\n", hex, s ? s : "");
-}
-
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init maple_probe(int platform)
-{
- if (platform != PLATFORM_MAPLE)
- return 0;
- /*
- * On U3, the DART (iommu) must be allocated now since it
- * has an impact on htab_initialize (due to the large page it
- * occupies having to be broken up so the DART itself is not
- * part of the cacheable linar mapping
- */
- alloc_u3_dart_table();
-
- return 1;
-}
-
-struct machdep_calls __initdata maple_md = {
- .probe = maple_probe,
- .setup_arch = maple_setup_arch,
- .init_early = maple_init_early,
- .init_IRQ = maple_init_IRQ,
- .get_irq = mpic_get_irq,
- .pcibios_fixup = maple_pcibios_fixup,
- .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
- .restart = maple_restart,
- .power_off = maple_power_off,
- .halt = maple_halt,
- .get_boot_time = maple_get_boot_time,
- .set_rtc_time = maple_set_rtc_time,
- .get_rtc_time = maple_get_rtc_time,
- .calibrate_decr = generic_calibrate_decr,
- .progress = maple_progress,
- .idle_loop = native_idle,
-};
+++ /dev/null
-/*
- * arch/ppc64/kernel/maple_time.c
- *
- * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
- * IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#undef DEBUG
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-extern void GregorianDay(struct rtc_time * tm);
-
-static int maple_rtc_addr;
-
-static int maple_clock_read(int addr)
-{
- outb_p(addr, maple_rtc_addr);
- return inb_p(maple_rtc_addr+1);
-}
-
-static void maple_clock_write(unsigned long val, int addr)
-{
- outb_p(addr, maple_rtc_addr);
- outb_p(val, maple_rtc_addr+1);
-}
-
-void maple_get_rtc_time(struct rtc_time *tm)
-{
- int uip, i;
-
- /* The Linux interpretation of the CMOS clock register contents:
- * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
- * RTC registers show the second which has precisely just started.
- * Let's hope other operating systems interpret the RTC the same way.
- */
-
- /* Since the UIP flag is set for about 2.2 ms and the clock
- * is typically written with a precision of 1 jiffy, trying
- * to obtain a precision better than a few milliseconds is
- * an illusion. Only consistency is interesting, this also
- * allows to use the routine for /dev/rtc without a potential
- * 1 second kernel busy loop triggered by any reader of /dev/rtc.
- */
-
- for (i = 0; i<1000000; i++) {
- uip = maple_clock_read(RTC_FREQ_SELECT);
- tm->tm_sec = maple_clock_read(RTC_SECONDS);
- tm->tm_min = maple_clock_read(RTC_MINUTES);
- tm->tm_hour = maple_clock_read(RTC_HOURS);
- tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH);
- tm->tm_mon = maple_clock_read(RTC_MONTH);
- tm->tm_year = maple_clock_read(RTC_YEAR);
- uip |= maple_clock_read(RTC_FREQ_SELECT);
- if ((uip & RTC_UIP)==0)
- break;
- }
-
- if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
- || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(tm->tm_sec);
- BCD_TO_BIN(tm->tm_min);
- BCD_TO_BIN(tm->tm_hour);
- BCD_TO_BIN(tm->tm_mday);
- BCD_TO_BIN(tm->tm_mon);
- BCD_TO_BIN(tm->tm_year);
- }
- if ((tm->tm_year + 1900) < 1970)
- tm->tm_year += 100;
-
- GregorianDay(tm);
-}
-
-int maple_set_rtc_time(struct rtc_time *tm)
-{
- unsigned char save_control, save_freq_select;
- int sec, min, hour, mon, mday, year;
-
- spin_lock(&rtc_lock);
-
- save_control = maple_clock_read(RTC_CONTROL); /* tell the clock it's being set */
-
- maple_clock_write((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = maple_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
-
- maple_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- sec = tm->tm_sec;
- min = tm->tm_min;
- hour = tm->tm_hour;
- mon = tm->tm_mon;
- mday = tm->tm_mday;
- year = tm->tm_year;
-
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(sec);
- BIN_TO_BCD(min);
- BIN_TO_BCD(hour);
- BIN_TO_BCD(mon);
- BIN_TO_BCD(mday);
- BIN_TO_BCD(year);
- }
- maple_clock_write(sec, RTC_SECONDS);
- maple_clock_write(min, RTC_MINUTES);
- maple_clock_write(hour, RTC_HOURS);
- maple_clock_write(mon, RTC_MONTH);
- maple_clock_write(mday, RTC_DAY_OF_MONTH);
- maple_clock_write(year, RTC_YEAR);
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- maple_clock_write(save_control, RTC_CONTROL);
- maple_clock_write(save_freq_select, RTC_FREQ_SELECT);
-
- spin_unlock(&rtc_lock);
-
- return 0;
-}
-
-unsigned long __init maple_get_boot_time(void)
-{
- struct rtc_time tm;
- struct device_node *rtcs;
-
- rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
- if (rtcs && rtcs->addrs) {
- maple_rtc_addr = rtcs->addrs[0].address;
- printk(KERN_INFO "Maple: Found RTC at 0x%x\n", maple_rtc_addr);
- } else {
- maple_rtc_addr = RTC_PORT(0); /* legacy address */
- printk(KERN_INFO "Maple: No device node for RTC, assuming "
- "legacy address (0x%x)\n", maple_rtc_addr);
- }
-
- maple_get_rtc_time(&tm);
- return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
- tm.tm_hour, tm.tm_min, tm.tm_sec);
-}
-
projects / ~shefty / rdma-dev.git / commitdiff