u8 i2c_write_buffer[4];
u8 i2c_read_buffer[2];
struct mutex i2c_buffer_lock;
+ u8 input_mode_mpeg;
+
+ u16 tuner_enable;
+ struct i2c_adapter dib8096p_tuner_adap;
};
enum dib8000_power_mode {
- DIB8000M_POWER_ALL = 0,
- DIB8000M_POWER_INTERFACE_ONLY,
+ DIB8000_POWER_ALL = 0,
+ DIB8000_POWER_INTERFACE_ONLY,
};
static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
/* by default everything is going to be powered off */
u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff,
reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3,
+ reg_1280;
+
+ if (state->revision != 0x8090)
reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00;
+ else
+ reg_1280 = (dib8000_read_word(state, 1280) & 0x707f) | 0x8f80;
/* now, depending on the requested mode, we power on */
switch (mode) {
/* power up everything in the demod */
- case DIB8000M_POWER_ALL:
+ case DIB8000_POWER_ALL:
reg_774 = 0x0000;
reg_775 = 0x0000;
reg_776 = 0x0000;
reg_900 &= 0xfffc;
- reg_1280 &= 0x00ff;
+ if (state->revision != 0x8090)
+ reg_1280 &= 0x00ff;
+ else
+ reg_1280 &= 0x707f;
break;
- case DIB8000M_POWER_INTERFACE_ONLY:
- reg_1280 &= 0x00ff;
+ case DIB8000_POWER_INTERFACE_ONLY:
+ if (state->revision != 0x8090)
+ reg_1280 &= 0x00ff;
+ else
+ reg_1280 &= 0xfa7b;
break;
}
dib8000_write_word(state, 1280, reg_1280);
}
+static int dib8000_init_sdram(struct dib8000_state *state)
+{
+ u16 reg = 0;
+ dprintk("Init sdram");
+
+ reg = dib8000_read_word(state, 274)&0xfff0;
+ /* P_dintlv_delay_ram = 7 because of MobileSdram */
+ dib8000_write_word(state, 274, reg | 0x7);
+
+ dib8000_write_word(state, 1803, (7<<2));
+
+ reg = dib8000_read_word(state, 1280);
+ /* force restart P_restart_sdram */
+ dib8000_write_word(state, 1280, reg | (1<<2));
+
+ /* release restart P_restart_sdram */
+ dib8000_write_word(state, 1280, reg);
+
+ return 0;
+}
+
static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no)
{
int ret = 0;
- u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908);
+ u16 reg, reg_907 = dib8000_read_word(state, 907);
+ u16 reg_908 = dib8000_read_word(state, 908);
switch (no) {
case DIBX000_SLOW_ADC_ON:
- reg_908 |= (1 << 1) | (1 << 0);
- ret |= dib8000_write_word(state, 908, reg_908);
- reg_908 &= ~(1 << 1);
+ if (state->revision != 0x8090) {
+ reg_908 |= (1 << 1) | (1 << 0);
+ ret |= dib8000_write_word(state, 908, reg_908);
+ reg_908 &= ~(1 << 1);
+ } else {
+ reg = dib8000_read_word(state, 1925);
+ /* en_slowAdc = 1 & reset_sladc = 1 */
+ dib8000_write_word(state, 1925, reg |
+ (1<<4) | (1<<2));
+
+ /* read acces to make it works... strange ... */
+ reg = dib8000_read_word(state, 1925);
+ msleep(20);
+ /* en_slowAdc = 1 & reset_sladc = 0 */
+ dib8000_write_word(state, 1925, reg & ~(1<<4));
+
+ reg = dib8000_read_word(state, 921) & ~((0x3 << 14)
+ | (0x3 << 12));
+ /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ;
+ (Vin2 = Vcm) */
+ dib8000_write_word(state, 921, reg | (1 << 14)
+ | (3 << 12));
+ }
break;
case DIBX000_SLOW_ADC_OFF:
+ if (state->revision == 0x8090) {
+ reg = dib8000_read_word(state, 1925);
+ /* reset_sladc = 1 en_slowAdc = 0 */
+ dib8000_write_word(state, 1925,
+ (reg & ~(1<<2)) | (1<<4));
+ }
reg_908 |= (1 << 1) | (1 << 0);
break;
static int dib8000_sad_calib(struct dib8000_state *state)
{
-/* internal */
+ if (state->revision == 0x8090) {
+ dprintk("%s: the sad calibration is not needed for the dib8096P",
+ __func__);
+ return 0;
+ }
+ /* internal */
dib8000_write_word(state, 923, (0 << 1) | (0 << 0));
dib8000_write_word(state, 924, 776); // 0.625*3.3 / 4096
static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
{
dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
- dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); /* P_sec_len */
- dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff));
+ if (state->revision != 0x8090) {
+ dib8000_write_word(state, 23,
+ (u16) (((bw->internal * 1000) >> 16) & 0xffff));
+ dib8000_write_word(state, 24,
+ (u16) ((bw->internal * 1000) & 0xffff));
+ } else {
+ dib8000_write_word(state, 23, (u16) (((bw->internal / 2 * 1000) >> 16) & 0xffff));
+ dib8000_write_word(state, 24,
+ (u16) ((bw->internal / 2 * 1000) & 0xffff));
+ }
dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff));
dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff));
dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003));
- dib8000_write_word(state, 922, bw->sad_cfg);
+ if (state->revision != 0x8090)
+ dib8000_write_word(state, 922, bw->sad_cfg);
}
static void dib8000_reset_pll(struct dib8000_state *state)
{
const struct dibx000_bandwidth_config *pll = state->cfg.pll;
- u16 clk_cfg1;
-
- // clk_cfg0
- dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0));
-
- // clk_cfg1
- clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
- (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) |
- (pll->pll_range << 1) | (pll->pll_reset << 0);
-
- dib8000_write_word(state, 902, clk_cfg1);
- clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
- dib8000_write_word(state, 902, clk_cfg1);
-
- dprintk("clk_cfg1: 0x%04x", clk_cfg1); /* 0x507 1 0 1 000 0 0 11 1 */
-
- /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
- if (state->cfg.pll->ADClkSrc == 0)
- dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) |
- (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
- else if (state->cfg.refclksel != 0)
- dib8000_write_word(state, 904, (0 << 15) | (1 << 12) |
- ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) |
- (pll->ADClkSrc << 7) | (0 << 1));
- else
- dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
+ u16 clk_cfg1, reg;
+
+ if (state->revision != 0x8090) {
+ dib8000_write_word(state, 901,
+ (pll->pll_prediv << 8) | (pll->pll_ratio << 0));
+
+ clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
+ (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) |
+ (1 << 3) | (pll->pll_range << 1) |
+ (pll->pll_reset << 0);
+
+ dib8000_write_word(state, 902, clk_cfg1);
+ clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
+ dib8000_write_word(state, 902, clk_cfg1);
+
+ dprintk("clk_cfg1: 0x%04x", clk_cfg1);
+
+ /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
+ if (state->cfg.pll->ADClkSrc == 0)
+ dib8000_write_word(state, 904,
+ (0 << 15) | (0 << 12) | (0 << 10) |
+ (pll->modulo << 8) |
+ (pll->ADClkSrc << 7) | (0 << 1));
+ else if (state->cfg.refclksel != 0)
+ dib8000_write_word(state, 904, (0 << 15) | (1 << 12) |
+ ((state->cfg.refclksel & 0x3) << 10) |
+ (pll->modulo << 8) |
+ (pll->ADClkSrc << 7) | (0 << 1));
+ else
+ dib8000_write_word(state, 904, (0 << 15) | (1 << 12) |
+ (3 << 10) | (pll->modulo << 8) |
+ (pll->ADClkSrc << 7) | (0 << 1));
+ } else {
+ dib8000_write_word(state, 1856, (!pll->pll_reset<<13) |
+ (pll->pll_range<<12) | (pll->pll_ratio<<6) |
+ (pll->pll_prediv));
+
+ reg = dib8000_read_word(state, 1857);
+ dib8000_write_word(state, 1857, reg|(!pll->pll_bypass<<15));
+
+ reg = dib8000_read_word(state, 1858); /* Force clk out pll /2 */
+ dib8000_write_word(state, 1858, reg | 1);
+
+ dib8000_write_word(state, 904, (pll->modulo << 8));
+ }
dib8000_reset_pll_common(state, pll);
}
+int dib8000_update_pll(struct dvb_frontend *fe,
+ struct dibx000_bandwidth_config *pll)
+{
+ struct dib8000_state *state = fe->demodulator_priv;
+ u16 reg_1857, reg_1856 = dib8000_read_word(state, 1856);
+ u8 loopdiv, prediv;
+ u32 internal, xtal;
+
+ /* get back old values */
+ prediv = reg_1856 & 0x3f;
+ loopdiv = (reg_1856 >> 6) & 0x3f;
+
+ if ((pll != NULL) && (pll->pll_prediv != prediv ||
+ pll->pll_ratio != loopdiv)) {
+ dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio);
+ reg_1856 &= 0xf000;
+ reg_1857 = dib8000_read_word(state, 1857);
+ /* disable PLL */
+ dib8000_write_word(state, 1857, reg_1857 & ~(1 << 15));
+
+ dib8000_write_word(state, 1856, reg_1856 |
+ ((pll->pll_ratio & 0x3f) << 6) |
+ (pll->pll_prediv & 0x3f));
+
+ /* write new system clk into P_sec_len */
+ internal = dib8000_read32(state, 23) / 1000;
+ dprintk("Old Internal = %d", internal);
+ xtal = 2 * (internal / loopdiv) * prediv;
+ internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio;
+ dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal, internal/1000, internal/2000, internal/8000);
+ dprintk("New Internal = %d", internal);
+
+ dib8000_write_word(state, 23,
+ (u16) (((internal / 2) >> 16) & 0xffff));
+ dib8000_write_word(state, 24, (u16) ((internal / 2) & 0xffff));
+ /* enable PLL */
+ dib8000_write_word(state, 1857, reg_1857 | (1 << 15));
+
+ while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1)
+ dprintk("Waiting for PLL to lock");
+
+ /* verify */
+ reg_1856 = dib8000_read_word(state, 1856);
+ dprintk("PLL Updated with prediv = %d and loopdiv = %d",
+ reg_1856&0x3f, (reg_1856>>6)&0x3f);
+
+ return 0;
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(dib8000_update_pll);
+
+
static int dib8000_reset_gpio(struct dib8000_state *st)
{
/* reset the GPIOs */
(3 << 5) | /* P_ctrl_pre_freq_step=3 */
(1 << 0), /* P_pre_freq_win_len=1 */
- 1, 903,
- (0 << 4) | 2, // P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW)
-
0,
};
}
value = dib8000_i2c_read16(client, 897);
- if (value != 0x8000 && value != 0x8001 && value != 0x8002) {
+ if (value != 0x8000 && value != 0x8001 &&
+ value != 0x8002 && value != 0x8090) {
dprintk("wrong Device ID (%x)", value);
return 0;
}
case 0x8002:
dprintk("found DiB8000C");
break;
+ case 0x8090:
+ dprintk("found DiB8096P");
+ break;
}
return value;
}
{
struct dib8000_state *state = fe->demodulator_priv;
- dib8000_write_word(state, 1287, 0x0003); /* sram lead in, rdy */
-
if ((state->revision = dib8000_identify(&state->i2c)) == 0)
return -EINVAL;
+ /* sram lead in, rdy */
+ if (state->revision != 0x8090)
+ dib8000_write_word(state, 1287, 0x0003);
+
if (state->revision == 0x8000)
dprintk("error : dib8000 MA not supported");
dibx000_reset_i2c_master(&state->i2c_master);
- dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
+ dib8000_set_power_mode(state, DIB8000_POWER_ALL);
/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
dib8000_set_adc_state(state, DIBX000_VBG_ENABLE);
dib8000_write_word(state, 770, 0xffff);
dib8000_write_word(state, 771, 0xffff);
dib8000_write_word(state, 772, 0xfffc);
- dib8000_write_word(state, 898, 0x000c); // sad
- dib8000_write_word(state, 1280, 0x004d);
+ if (state->revision == 0x8090)
+ dib8000_write_word(state, 1280, 0x0045);
+ else
+ dib8000_write_word(state, 1280, 0x004d);
dib8000_write_word(state, 1281, 0x000c);
dib8000_write_word(state, 770, 0x0000);
dib8000_write_word(state, 1281, 0x0000);
/* drives */
- if (state->cfg.drives)
- dib8000_write_word(state, 906, state->cfg.drives);
- else {
- dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
- dib8000_write_word(state, 906, 0x2d98); // min drive SDRAM - not optimal - adjust
+ if (state->revision != 0x8090) {
+ if (state->cfg.drives)
+ dib8000_write_word(state, 906, state->cfg.drives);
+ else {
+ dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
+ /* min drive SDRAM - not optimal - adjust */
+ dib8000_write_word(state, 906, 0x2d98);
+ }
}
dib8000_reset_pll(state);
+ if (state->revision != 0x8090)
+ dib8000_write_word(state, 898, 0x0004);
if (dib8000_reset_gpio(state) != 0)
dprintk("GPIO reset was not successful.");
- if (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0)
+ if ((state->revision != 0x8090) &&
+ (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0))
dprintk("OUTPUT_MODE could not be resetted.");
state->current_agc = NULL;
l = *n++;
}
}
+ if (state->revision != 0x8090)
+ dib8000_write_word(state, 903, (0 << 4) | 2);
state->isdbt_cfg_loaded = 0;
//div_cfg override for special configs
dib8000_set_bandwidth(fe, 6000);
dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON);
- dib8000_sad_calib(state);
- dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+ if (state->revision != 0x8090) {
+ dib8000_sad_calib(state);
+ dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+ }
- dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY);
+ dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY);
return 0;
}
{
struct dibx000_agc_config *agc = NULL;
int i;
+ u16 reg;
+
if (state->current_band == band && state->current_agc != NULL)
return 0;
state->current_band = band;
dib8000_write_word(state, 106, state->wbd_ref);
else // use default
dib8000_write_word(state, 106, agc->wbd_ref);
+
+ if (state->revision == 0x8090) {
+ reg = dib8000_read_word(state, 922) & (0x3 << 2);
+ dib8000_write_word(state, 922, reg | (agc->wbd_sel << 2));
+ }
+
dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
dib8000_write_word(state, 108, agc->agc1_max);
dib8000_write_word(state, 109, agc->agc1_min);
dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
dib8000_write_word(state, 75, agc->agc1_pt3);
- dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); /*LB : 929 -> 923 */
+ if (state->revision != 0x8090)
+ dib8000_write_word(state, 923,
+ (dib8000_read_word(state, 923) & 0xffe3) |
+ (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
return 0;
}
{
struct dib8000_state *state = fe->demodulator_priv;
enum frontend_tune_state *tune_state = &state->tune_state;
-
int ret = 0;
+ u16 reg, upd_demod_gain_period = 0x8000;
switch (*tune_state) {
case CT_AGC_START:
// set power-up level: interf+analog+AGC
- dib8000_set_adc_state(state, DIBX000_ADC_ON);
+ if (state->revision != 0x8090)
+ dib8000_set_adc_state(state, DIBX000_ADC_ON);
+ else {
+ dib8000_set_power_mode(state, DIB8000_POWER_ALL);
+
+ reg = dib8000_read_word(state, 1947)&0xff00;
+ dib8000_write_word(state, 1946,
+ upd_demod_gain_period & 0xFFFF);
+ /* bit 14 = enDemodGain */
+ dib8000_write_word(state, 1947, reg | (1<<14) |
+ ((upd_demod_gain_period >> 16) & 0xFF));
+
+ /* enable adc i & q */
+ reg = dib8000_read_word(state, 1920);
+ dib8000_write_word(state, 1920, (reg | 0x3) &
+ (~(1 << 7)));
+ }
if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) {
*tune_state = CT_AGC_STOP;
}
+static void dib8096p_host_bus_drive(struct dib8000_state *state, u8 drive)
+{
+ u16 reg;
+
+ drive &= 0x7;
+
+ /* drive host bus 2, 3, 4 */
+ reg = dib8000_read_word(state, 1798) &
+ ~(0x7 | (0x7 << 6) | (0x7 << 12));
+ reg |= (drive<<12) | (drive<<6) | drive;
+ dib8000_write_word(state, 1798, reg);
+
+ /* drive host bus 5,6 */
+ reg = dib8000_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8));
+ reg |= (drive<<8) | (drive<<2);
+ dib8000_write_word(state, 1799, reg);
+
+ /* drive host bus 7, 8, 9 */
+ reg = dib8000_read_word(state, 1800) &
+ ~(0x7 | (0x7 << 6) | (0x7 << 12));
+ reg |= (drive<<12) | (drive<<6) | drive;
+ dib8000_write_word(state, 1800, reg);
+
+ /* drive host bus 10, 11 */
+ reg = dib8000_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8));
+ reg |= (drive<<8) | (drive<<2);
+ dib8000_write_word(state, 1801, reg);
+
+ /* drive host bus 12, 13, 14 */
+ reg = dib8000_read_word(state, 1802) &
+ ~(0x7 | (0x7 << 6) | (0x7 << 12));
+ reg |= (drive<<12) | (drive<<6) | drive;
+ dib8000_write_word(state, 1802, reg);
+}
+
+static u32 dib8096p_calcSyncFreq(u32 P_Kin, u32 P_Kout,
+ u32 insertExtSynchro, u32 syncSize)
+{
+ u32 quantif = 3;
+ u32 nom = (insertExtSynchro * P_Kin+syncSize);
+ u32 denom = P_Kout;
+ u32 syncFreq = ((nom << quantif) / denom);
+
+ if ((syncFreq & ((1 << quantif) - 1)) != 0)
+ syncFreq = (syncFreq >> quantif) + 1;
+ else
+ syncFreq = (syncFreq >> quantif);
+
+ if (syncFreq != 0)
+ syncFreq = syncFreq - 1;
+
+ return syncFreq;
+}
+
+static void dib8096p_cfg_DibTx(struct dib8000_state *state, u32 P_Kin,
+ u32 P_Kout, u32 insertExtSynchro, u32 synchroMode,
+ u32 syncWord, u32 syncSize)
+{
+ dprintk("Configure DibStream Tx");
+
+ dib8000_write_word(state, 1615, 1);
+ dib8000_write_word(state, 1603, P_Kin);
+ dib8000_write_word(state, 1605, P_Kout);
+ dib8000_write_word(state, 1606, insertExtSynchro);
+ dib8000_write_word(state, 1608, synchroMode);
+ dib8000_write_word(state, 1609, (syncWord >> 16) & 0xffff);
+ dib8000_write_word(state, 1610, syncWord & 0xffff);
+ dib8000_write_word(state, 1612, syncSize);
+ dib8000_write_word(state, 1615, 0);
+}
+
+static void dib8096p_cfg_DibRx(struct dib8000_state *state, u32 P_Kin,
+ u32 P_Kout, u32 synchroMode, u32 insertExtSynchro,
+ u32 syncWord, u32 syncSize, u32 dataOutRate)
+{
+ u32 syncFreq;
+
+ dprintk("Configure DibStream Rx synchroMode = %d", synchroMode);
+
+ if ((P_Kin != 0) && (P_Kout != 0)) {
+ syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout,
+ insertExtSynchro, syncSize);
+ dib8000_write_word(state, 1542, syncFreq);
+ }
+
+ dib8000_write_word(state, 1554, 1);
+ dib8000_write_word(state, 1536, P_Kin);
+ dib8000_write_word(state, 1537, P_Kout);
+ dib8000_write_word(state, 1539, synchroMode);
+ dib8000_write_word(state, 1540, (syncWord >> 16) & 0xffff);
+ dib8000_write_word(state, 1541, syncWord & 0xffff);
+ dib8000_write_word(state, 1543, syncSize);
+ dib8000_write_word(state, 1544, dataOutRate);
+ dib8000_write_word(state, 1554, 0);
+}
+
+static void dib8096p_enMpegMux(struct dib8000_state *state, int onoff)
+{
+ u16 reg_1287;
+
+ reg_1287 = dib8000_read_word(state, 1287);
+
+ switch (onoff) {
+ case 1:
+ reg_1287 &= ~(1 << 8);
+ break;
+ case 0:
+ reg_1287 |= (1 << 8);
+ break;
+ }
+
+ dib8000_write_word(state, 1287, reg_1287);
+}
+
+static void dib8096p_configMpegMux(struct dib8000_state *state,
+ u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2)
+{
+ u16 reg_1287;
+
+ dprintk("Enable Mpeg mux");
+
+ dib8096p_enMpegMux(state, 0);
+
+ /* If the input mode is MPEG do not divide the serial clock */
+ if ((enSerialMode == 1) && (state->input_mode_mpeg == 1))
+ enSerialClkDiv2 = 0;
+
+ reg_1287 = ((pulseWidth & 0x1f) << 3) |
+ ((enSerialMode & 0x1) << 2) | (enSerialClkDiv2 & 0x1);
+ dib8000_write_word(state, 1287, reg_1287);
+
+ dib8096p_enMpegMux(state, 1);
+}
+
+static void dib8096p_setDibTxMux(struct dib8000_state *state, int mode)
+{
+ u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 7);
+
+ switch (mode) {
+ case MPEG_ON_DIBTX:
+ dprintk("SET MPEG ON DIBSTREAM TX");
+ dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0);
+ reg_1288 |= (1 << 9); break;
+ case DIV_ON_DIBTX:
+ dprintk("SET DIV_OUT ON DIBSTREAM TX");
+ dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0);
+ reg_1288 |= (1 << 8); break;
+ case ADC_ON_DIBTX:
+ dprintk("SET ADC_OUT ON DIBSTREAM TX");
+ dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0);
+ reg_1288 |= (1 << 7); break;
+ default:
+ break;
+ }
+ dib8000_write_word(state, 1288, reg_1288);
+}
+
+static void dib8096p_setHostBusMux(struct dib8000_state *state, int mode)
+{
+ u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 4);
+
+ switch (mode) {
+ case DEMOUT_ON_HOSTBUS:
+ dprintk("SET DEM OUT OLD INTERF ON HOST BUS");
+ dib8096p_enMpegMux(state, 0);
+ reg_1288 |= (1 << 6);
+ break;
+ case DIBTX_ON_HOSTBUS:
+ dprintk("SET DIBSTREAM TX ON HOST BUS");
+ dib8096p_enMpegMux(state, 0);
+ reg_1288 |= (1 << 5);
+ break;
+ case MPEG_ON_HOSTBUS:
+ dprintk("SET MPEG MUX ON HOST BUS");
+ reg_1288 |= (1 << 4);
+ break;
+ default:
+ break;
+ }
+ dib8000_write_word(state, 1288, reg_1288);
+}
+
+static int dib8096p_set_diversity_in(struct dvb_frontend *fe, int onoff)
+{
+ struct dib8000_state *state = fe->demodulator_priv;
+ u16 reg_1287;
+
+ switch (onoff) {
+ case 0: /* only use the internal way - not the diversity input */
+ dprintk("%s mode OFF : by default Enable Mpeg INPUT",
+ __func__);
+ /* outputRate = 8 */
+ dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0);
+
+ /* Do not divide the serial clock of MPEG MUX in
+ SERIAL MODE in case input mode MPEG is used */
+ reg_1287 = dib8000_read_word(state, 1287);
+ /* enSerialClkDiv2 == 1 ? */
+ if ((reg_1287 & 0x1) == 1) {
+ /* force enSerialClkDiv2 = 0 */
+ reg_1287 &= ~0x1;
+ dib8000_write_word(state, 1287, reg_1287);
+ }
+ state->input_mode_mpeg = 1;
+ break;
+ case 1: /* both ways */
+ case 2: /* only the diversity input */
+ dprintk("%s ON : Enable diversity INPUT", __func__);
+ dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0);
+ state->input_mode_mpeg = 0;
+ break;
+ }
+
+ dib8000_set_diversity_in(state->fe[0], onoff);
+ return 0;
+}
+
+static int dib8096p_set_output_mode(struct dvb_frontend *fe, int mode)
+{
+ struct dib8000_state *state = fe->demodulator_priv;
+ u16 outreg, smo_mode, fifo_threshold;
+ u8 prefer_mpeg_mux_use = 1;
+ int ret = 0;
+
+ dib8096p_host_bus_drive(state, 1);
+
+ fifo_threshold = 1792;
+ smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
+ outreg = dib8000_read_word(state, 1286) &
+ ~((1 << 10) | (0x7 << 6) | (1 << 1));
+
+ switch (mode) {
+ case OUTMODE_HIGH_Z:
+ outreg = 0;
+ break;
+
+ case OUTMODE_MPEG2_SERIAL:
+ if (prefer_mpeg_mux_use) {
+ dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux");
+ dib8096p_configMpegMux(state, 3, 1, 1);
+ dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS);
+ } else {/* Use Smooth block */
+ dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc");
+ dib8096p_setHostBusMux(state,
+ DEMOUT_ON_HOSTBUS);
+ outreg |= (2 << 6) | (0 << 1);
+ }
+ break;
+
+ case OUTMODE_MPEG2_PAR_GATED_CLK:
+ if (prefer_mpeg_mux_use) {
+ dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux");
+ dib8096p_configMpegMux(state, 2, 0, 0);
+ dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS);
+ } else { /* Use Smooth block */
+ dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block");
+ dib8096p_setHostBusMux(state,
+ DEMOUT_ON_HOSTBUS);
+ outreg |= (0 << 6);
+ }
+ break;
+
+ case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */
+ dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block");
+ dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
+ outreg |= (1 << 6);
+ break;
+
+ case OUTMODE_MPEG2_FIFO:
+ /* Using Smooth block because not supported
+ by new Mpeg Mux bloc */
+ dprintk("dib8096P setting output mode TS_FIFO using Smooth block");
+ dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS);
+ outreg |= (5 << 6);
+ smo_mode |= (3 << 1);
+ fifo_threshold = 512;
+ break;
+
+ case OUTMODE_DIVERSITY:
+ dprintk("dib8096P setting output mode MODE_DIVERSITY");
+ dib8096p_setDibTxMux(state, DIV_ON_DIBTX);
+ dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
+ break;
+
+ case OUTMODE_ANALOG_ADC:
+ dprintk("dib8096P setting output mode MODE_ANALOG_ADC");
+ dib8096p_setDibTxMux(state, ADC_ON_DIBTX);
+ dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
+ break;
+ }
+
+ if (mode != OUTMODE_HIGH_Z)
+ outreg |= (1<<10);
+
+ dprintk("output_mpeg2_in_188_bytes = %d",
+ state->cfg.output_mpeg2_in_188_bytes);
+ if (state->cfg.output_mpeg2_in_188_bytes)
+ smo_mode |= (1 << 5);
+
+ ret |= dib8000_write_word(state, 299, smo_mode);
+ /* synchronous fread */
+ ret |= dib8000_write_word(state, 299 + 1, fifo_threshold);
+ ret |= dib8000_write_word(state, 1286, outreg);
+
+ return ret;
+}
+
+static int map_addr_to_serpar_number(struct i2c_msg *msg)
+{
+ if (msg->buf[0] <= 15)
+ msg->buf[0] -= 1;
+ else if (msg->buf[0] == 17)
+ msg->buf[0] = 15;
+ else if (msg->buf[0] == 16)
+ msg->buf[0] = 17;
+ else if (msg->buf[0] == 19)
+ msg->buf[0] = 16;
+ else if (msg->buf[0] >= 21 && msg->buf[0] <= 25)
+ msg->buf[0] -= 3;
+ else if (msg->buf[0] == 28)
+ msg->buf[0] = 23;
+ else if (msg->buf[0] == 99)
+ msg->buf[0] = 99;
+ else
+ return -EINVAL;
+ return 0;
+}
+
+static int dib8096p_tuner_write_serpar(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
+ u8 n_overflow = 1;
+ u16 i = 1000;
+ u16 serpar_num = msg[0].buf[0];
+
+ while (n_overflow == 1 && i) {
+ n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1;
+ i--;
+ if (i == 0)
+ dprintk("Tuner ITF: write busy (overflow)");
+ }
+ dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f));
+ dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]);
+
+ return num;
+}
+
+static int dib8096p_tuner_read_serpar(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
+ u8 n_overflow = 1, n_empty = 1;
+ u16 i = 1000;
+ u16 serpar_num = msg[0].buf[0];
+ u16 read_word;
+
+ while (n_overflow == 1 && i) {
+ n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1;
+ i--;
+ if (i == 0)
+ dprintk("TunerITF: read busy (overflow)");
+ }
+ dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f));
+
+ i = 1000;
+ while (n_empty == 1 && i) {
+ n_empty = dib8000_read_word(state, 1984)&0x1;
+ i--;
+ if (i == 0)
+ dprintk("TunerITF: read busy (empty)");
+ }
+
+ read_word = dib8000_read_word(state, 1987);
+ msg[1].buf[0] = (read_word >> 8) & 0xff;
+ msg[1].buf[1] = (read_word) & 0xff;
+
+ return num;
+}
+
+static int dib8096p_tuner_rw_serpar(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msg[], int num)
+{
+ if (map_addr_to_serpar_number(&msg[0]) == 0) {
+ if (num == 1) /* write */
+ return dib8096p_tuner_write_serpar(i2c_adap, msg, 1);
+ else /* read */
+ return dib8096p_tuner_read_serpar(i2c_adap, msg, 2);
+ }
+ return num;
+}
+
+static int dib8096p_rw_on_apb(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msg[], int num, u16 apb_address)
+{
+ struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
+ u16 word;
+
+ if (num == 1) { /* write */
+ dib8000_write_word(state, apb_address,
+ ((msg[0].buf[1] << 8) | (msg[0].buf[2])));
+ } else {
+ word = dib8000_read_word(state, apb_address);
+ msg[1].buf[0] = (word >> 8) & 0xff;
+ msg[1].buf[1] = (word) & 0xff;
+ }
+ return num;
+}
+
+static int dib8096p_tuner_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msg[], int num)
+{
+ struct dib8000_state *state = i2c_get_adapdata(i2c_adap);
+ u16 apb_address = 0, word;
+ int i = 0;
+
+ switch (msg[0].buf[0]) {
+ case 0x12:
+ apb_address = 1920;
+ break;
+ case 0x14:
+ apb_address = 1921;
+ break;
+ case 0x24:
+ apb_address = 1922;
+ break;
+ case 0x1a:
+ apb_address = 1923;
+ break;
+ case 0x22:
+ apb_address = 1924;
+ break;
+ case 0x33:
+ apb_address = 1926;
+ break;
+ case 0x34:
+ apb_address = 1927;
+ break;
+ case 0x35:
+ apb_address = 1928;
+ break;
+ case 0x36:
+ apb_address = 1929;
+ break;
+ case 0x37:
+ apb_address = 1930;
+ break;
+ case 0x38:
+ apb_address = 1931;
+ break;
+ case 0x39:
+ apb_address = 1932;
+ break;
+ case 0x2a:
+ apb_address = 1935;
+ break;
+ case 0x2b:
+ apb_address = 1936;
+ break;
+ case 0x2c:
+ apb_address = 1937;
+ break;
+ case 0x2d:
+ apb_address = 1938;
+ break;
+ case 0x2e:
+ apb_address = 1939;
+ break;
+ case 0x2f:
+ apb_address = 1940;
+ break;
+ case 0x30:
+ apb_address = 1941;
+ break;
+ case 0x31:
+ apb_address = 1942;
+ break;
+ case 0x32:
+ apb_address = 1943;
+ break;
+ case 0x3e:
+ apb_address = 1944;
+ break;
+ case 0x3f:
+ apb_address = 1945;
+ break;
+ case 0x40:
+ apb_address = 1948;
+ break;
+ case 0x25:
+ apb_address = 936;
+ break;
+ case 0x26:
+ apb_address = 937;
+ break;
+ case 0x27:
+ apb_address = 938;
+ break;
+ case 0x28:
+ apb_address = 939;
+ break;
+ case 0x1d:
+ /* get sad sel request */
+ i = ((dib8000_read_word(state, 921) >> 12)&0x3);
+ word = dib8000_read_word(state, 924+i);
+ msg[1].buf[0] = (word >> 8) & 0xff;
+ msg[1].buf[1] = (word) & 0xff;
+ return num;
+ case 0x1f:
+ if (num == 1) { /* write */
+ word = (u16) ((msg[0].buf[1] << 8) |
+ msg[0].buf[2]);
+ /* in the VGAMODE Sel are located on bit 0/1 */
+ word &= 0x3;
+ word = (dib8000_read_word(state, 921) &
+ ~(3<<12)) | (word<<12);
+ /* Set the proper input */
+ dib8000_write_word(state, 921, word);
+ return num;
+ }
+ }
+
+ if (apb_address != 0) /* R/W acces via APB */
+ return dib8096p_rw_on_apb(i2c_adap, msg, num, apb_address);
+ else /* R/W access via SERPAR */
+ return dib8096p_tuner_rw_serpar(i2c_adap, msg, num);
+
+ return 0;
+}
+
+static u32 dib8096p_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm dib8096p_tuner_xfer_algo = {
+ .master_xfer = dib8096p_tuner_xfer,
+ .functionality = dib8096p_i2c_func,
+};
+
+struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe)
+{
+ struct dib8000_state *st = fe->demodulator_priv;
+ return &st->dib8096p_tuner_adap;
+}
+EXPORT_SYMBOL(dib8096p_get_i2c_tuner);
+
+int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+ struct dib8000_state *state = fe->demodulator_priv;
+ u16 en_cur_state;
+
+ dprintk("sleep dib8096p: %d", onoff);
+
+ en_cur_state = dib8000_read_word(state, 1922);
+
+ /* LNAs and MIX are ON and therefore it is a valid configuration */
+ if (en_cur_state > 0xff)
+ state->tuner_enable = en_cur_state ;
+
+ if (onoff)
+ en_cur_state &= 0x00ff;
+ else {
+ if (state->tuner_enable != 0)
+ en_cur_state = state->tuner_enable;
+ }
+
+ dib8000_write_word(state, 1922, en_cur_state);
+
+ return 0;
+}
+EXPORT_SYMBOL(dib8096p_tuner_sleep);
+
static const s32 lut_1000ln_mant[] =
{
908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600
}
EXPORT_SYMBOL(dib8000_get_adc_power);
+int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ)
+{
+ struct dib8000_state *state = fe->demodulator_priv;
+ int val = 0;
+
+ switch (IQ) {
+ case 1:
+ val = dib8000_read_word(state, 403);
+ break;
+ case 0:
+ val = dib8000_read_word(state, 404);
+ break;
+ }
+ if (val & 0x200)
+ val -= 1024;
+
+ return val;
+}
+EXPORT_SYMBOL(dib8090p_get_dc_power);
+
static void dib8000_update_timf(struct dib8000_state *state)
{
u32 timf = state->timf = dib8000_read32(state, 435);
dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
}
+u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf)
+{
+ struct dib8000_state *state = fe->demodulator_priv;
+
+ switch (op) {
+ case DEMOD_TIMF_SET:
+ state->timf = timf;
+ break;
+ case DEMOD_TIMF_UPDATE:
+ dib8000_update_timf(state);
+ break;
+ case DEMOD_TIMF_GET:
+ break;
+ }
+ dib8000_set_bandwidth(state->fe[0], 6000);
+
+ return state->timf;
+}
+EXPORT_SYMBOL(dib8000_ctrl_timf);
+
static const u16 adc_target_16dB[11] = {
(1 << 13) - 825 - 117,
(1 << 13) - 837 - 117,
u16 init_prbs = 0xfff;
u16 ana_gain = 0;
+ if (state->revision == 0x8090)
+ dib8000_init_sdram(state);
+
if (state->ber_monitored_layer != LAYER_ALL)
dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer);
else
dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask);
state->differential_constellation = (seg_diff_mask != 0);
- dib8000_set_diversity_in(state->fe[0], state->diversity_onoff);
+ if (state->revision != 0x8090)
+ dib8000_set_diversity_in(state->fe[0], state->diversity_onoff);
+ else
+ dib8096p_set_diversity_in(state->fe[0], state->diversity_onoff);
if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) {
if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 1)
{
struct dib8000_state *state = fe->demodulator_priv;
int ret = 0;
- u16 value, mode = fft_to_mode(state);
+ u16 lock, value, mode = fft_to_mode(state);
// we are already tuned - just resuming from suspend
if (state == NULL)
}
// we achieved a coff_cpil_lock - it's time to update the timf
- if ((dib8000_read_word(state, 568) >> 11) & 0x1)
+ if (state->revision != 0x8090)
+ lock = dib8000_read_word(state, 568);
+ else
+ lock = dib8000_read_word(state, 570);
+ if ((lock >> 11) & 0x1)
dib8000_update_timf(state);
//now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start
u8 index_frontend;
int ret;
- dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
+ dib8000_set_power_mode(state, DIB8000_POWER_ALL);
dib8000_set_adc_state(state, DIBX000_ADC_ON);
if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
dprintk("could not start Slow ADC");
+ if (state->revision != 0x8090)
+ dib8000_sad_calib(state);
+
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
ret = state->fe[index_frontend]->ops.init(state->fe[index_frontend]);
if (ret < 0)
return ret;
}
- dib8000_set_output_mode(fe, OUTMODE_HIGH_Z);
- dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY);
+ if (state->revision != 0x8090)
+ dib8000_set_output_mode(fe, OUTMODE_HIGH_Z);
+ dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY);
return dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(state, DIBX000_ADC_OFF);
}
fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1;
- val = dib8000_read_word(state, 570);
+ if (state->revision == 0x8090)
+ val = dib8000_read_word(state, 572);
+ else
+ val = dib8000_read_word(state, 570);
fe->dtv_property_cache.inversion = (val & 0x40) >> 6;
switch ((val & 0x30) >> 4) {
case 1:
state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_ISDBT;
memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties));
- dib8000_set_output_mode(state->fe[index_frontend], OUTMODE_HIGH_Z);
+ if (state->revision != 0x8090)
+ dib8000_set_output_mode(state->fe[index_frontend],
+ OUTMODE_HIGH_Z);
+ else
+ dib8096p_set_output_mode(state->fe[index_frontend],
+ OUTMODE_HIGH_Z);
if (state->fe[index_frontend]->ops.tuner_ops.set_params)
state->fe[index_frontend]->ops.tuner_ops.set_params(state->fe[index_frontend], fep);
ret = dib8000_tune(state->fe[index_frontend]);
/* set output mode and diversity input */
- dib8000_set_output_mode(state->fe[0], state->cfg.output_mode);
- for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
- dib8000_set_output_mode(state->fe[index_frontend], OUTMODE_DIVERSITY);
- dib8000_set_diversity_in(state->fe[index_frontend-1], 1);
- }
+ if (state->revision != 0x8090) {
+ dib8000_set_output_mode(state->fe[0], state->cfg.output_mode);
+ for (index_frontend = 1;
+ (index_frontend < MAX_NUMBER_OF_FRONTENDS) &&
+ (state->fe[index_frontend] != NULL);
+ index_frontend++) {
+ dib8000_set_output_mode(state->fe[index_frontend],
+ OUTMODE_DIVERSITY);
+ dib8000_set_diversity_in(state->fe[index_frontend-1], 1);
+ }
- /* turn off the diversity of the last chip */
- dib8000_set_diversity_in(state->fe[index_frontend-1], 0);
+ /* turn off the diversity of the last chip */
+ dib8000_set_diversity_in(state->fe[index_frontend-1], 0);
+ } else {
+ dib8096p_set_output_mode(state->fe[0], state->cfg.output_mode);
+ if (state->cfg.enMpegOutput == 0) {
+ dib8096p_setDibTxMux(state, MPEG_ON_DIBTX);
+ dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS);
+ }
+ for (index_frontend = 1;
+ (index_frontend < MAX_NUMBER_OF_FRONTENDS) &&
+ (state->fe[index_frontend] != NULL);
+ index_frontend++) {
+ dib8096p_set_output_mode(state->fe[index_frontend],
+ OUTMODE_DIVERSITY);
+ dib8096p_set_diversity_in(state->fe[index_frontend-1], 1);
+ }
+
+ /* turn off the diversity of the last chip */
+ dib8096p_set_diversity_in(state->fe[index_frontend-1], 0);
+ }
return ret;
}
{
struct dib8000_state *state = fe->demodulator_priv;
+ if (state->revision == 0x8090)
+ return dib8000_read_word(state, 570);
return dib8000_read_word(state, 568);
}
static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
{
struct dib8000_state *state = fe->demodulator_priv;
- u16 lock_slave = 0, lock = dib8000_read_word(state, 568);
+ u16 lock_slave = 0, lock;
u8 index_frontend;
+ if (state->revision == 0x8090)
+ lock = dib8000_read_word(state, 570);
+ else
+ lock = dib8000_read_word(state, 568);
+
for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++)
lock_slave |= dib8000_read_lock(state->fe[index_frontend]);
static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber)
{
struct dib8000_state *state = fe->demodulator_priv;
- *ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561); // 13 segments
+
+ /* 13 segments */
+ if (state->revision == 0x8090)
+ *ber = (dib8000_read_word(state, 562) << 16) |
+ dib8000_read_word(state, 563);
+ else
+ *ber = (dib8000_read_word(state, 560) << 16) |
+ dib8000_read_word(state, 561);
return 0;
}
static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
{
struct dib8000_state *state = fe->demodulator_priv;
- *unc = dib8000_read_word(state, 565); // packet error on 13 seg
+
+ /* packet error on 13 seg */
+ if (state->revision == 0x8090)
+ *unc = dib8000_read_word(state, 567);
+ else
+ *unc = dib8000_read_word(state, 565);
return 0;
}
u32 n, s, exp;
u16 val;
- val = dib8000_read_word(state, 542);
+ if (state->revision != 0x8090)
+ val = dib8000_read_word(state, 542);
+ else
+ val = dib8000_read_word(state, 544);
n = (val >> 6) & 0xff;
exp = (val & 0x3f);
if ((exp & 0x20) != 0)
exp -= 0x40;
n <<= exp+16;
- val = dib8000_read_word(state, 543);
+ if (state->revision != 0x8090)
+ val = dib8000_read_word(state, 543);
+ else
+ val = dib8000_read_word(state, 545);
s = (val >> 6) & 0xff;
exp = (val & 0x3f);
if ((exp & 0x20) != 0)
EXPORT_SYMBOL(dib8000_get_slave_frontend);
-int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
+int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods,
+ u8 default_addr, u8 first_addr, u8 is_dib8096p)
{
int k = 0, ret = 0;
u8 new_addr = 0;
new_addr = first_addr + (k << 1);
client.addr = new_addr;
- dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */
- if (dib8000_identify(&client) == 0) {
+ if (!is_dib8096p)
dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */
+ if (dib8000_identify(&client) == 0) {
+ /* sram lead in, rdy */
+ if (!is_dib8096p)
+ dib8000_i2c_write16(&client, 1287, 0x0003);
client.addr = default_addr;
if (dib8000_identify(&client) == 0) {
dprintk("#%d: not identified", k);
dvb_frontend_detach(st->fe[index_frontend]);
dibx000_exit_i2c_master(&st->i2c_master);
+ i2c_del_adapter(&st->dib8096p_tuner_adap);
kfree(st->fe[0]);
kfree(st);
}
dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
+ /* init 8096p tuner adapter */
+ strncpy(state->dib8096p_tuner_adap.name, "DiB8096P tuner interface",
+ sizeof(state->dib8096p_tuner_adap.name));
+ state->dib8096p_tuner_adap.algo = &dib8096p_tuner_xfer_algo;
+ state->dib8096p_tuner_adap.algo_data = NULL;
+ state->dib8096p_tuner_adap.dev.parent = state->i2c.adap->dev.parent;
+ i2c_set_adapdata(&state->dib8096p_tuner_adap, state);
+ i2c_add_adapter(&state->dib8096p_tuner_adap);
+
dib8000_reset(fe);
dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */
projects / ~shefty / rdma-dev.git / commitdiff