]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
iwlagn: move PCI related operations from probe and remove to PCI layer
authorEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Tue, 31 May 2011 06:07:00 +0000 (09:07 +0300)
committerWey-Yi Guy <wey-yi.w.guy@intel.com>
Sat, 18 Jun 2011 15:07:14 +0000 (08:07 -0700)
Since we have now a PCI layer, all the init and deinit code that is PCI
related should move to there.

Also move the IO functions: read8/read32/write32. They need hw_base which
is killed from priv.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-dev.h
drivers/net/wireless/iwlwifi/iwl-io.h
drivers/net/wireless/iwlwifi/iwl-pci.c

index 0098245a62ed12c2cbda5b2c3303eef0a3ec1732..72db1a9fab849e9cc8152e819eb377663a09e6f2 100644 (file)
@@ -3486,7 +3486,7 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
        int err = 0;
        struct iwl_priv *priv;
        struct ieee80211_hw *hw;
-       u16 pci_cmd, num_mac;
+       u16 num_mac;
        u32 hw_rev;
 
        /************************
@@ -3532,49 +3532,6 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
        if (iwl_alloc_traffic_mem(priv))
                IWL_ERR(priv, "Not enough memory to generate traffic log\n");
 
-       /**************************
-        * 2. Initializing PCI bus
-        **************************/
-       pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
-                               PCIE_LINK_STATE_CLKPM);
-
-       if (pci_enable_device(pdev)) {
-               err = -ENODEV;
-               goto out_ieee80211_free_hw;
-       }
-
-       pci_set_master(pdev);
-
-       err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
-       if (!err)
-               err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
-       if (err) {
-               err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-               if (!err)
-                       err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-               /* both attempts failed: */
-               if (err) {
-                       IWL_WARN(priv, "No suitable DMA available.\n");
-                       goto out_pci_disable_device;
-               }
-       }
-
-       err = pci_request_regions(pdev, DRV_NAME);
-       if (err)
-               goto out_pci_disable_device;
-
-       /***********************
-        * 3. Read REV register
-        ***********************/
-       priv->hw_base = pci_iomap(pdev, 0, 0);
-       if (!priv->hw_base) {
-               err = -ENODEV;
-               goto out_pci_release_regions;
-       }
-
-       IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
-               (unsigned long long) pci_resource_len(pdev, 0));
-       IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
 
        /* these spin locks will be used in apm_ops.init and EEPROM access
         * we should init now
@@ -3589,17 +3546,16 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
         */
        iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 
+       /***********************
+        * 3. Read REV register
+        ***********************/
        hw_rev = iwl_hw_detect(priv);
        IWL_INFO(priv, "Detected %s, REV=0x%X\n",
                priv->cfg->name, hw_rev);
 
-       /* We disable the RETRY_TIMEOUT register (0x41) to keep
-        * PCI Tx retries from interfering with C3 CPU state */
-       pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
-
        if (iwl_prepare_card_hw(priv)) {
                IWL_WARN(priv, "Failed, HW not ready\n");
-               goto out_iounmap;
+               goto out_free_traffic_mem;
        }
 
        /*****************
@@ -3609,7 +3565,7 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
        err = iwl_eeprom_init(priv, hw_rev);
        if (err) {
                IWL_ERR(priv, "Unable to init EEPROM\n");
-               goto out_iounmap;
+               goto out_free_traffic_mem;
        }
        err = iwl_eeprom_check_version(priv);
        if (err)
@@ -3639,6 +3595,7 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
         * 5. Setup HW constants
         ************************/
        if (iwl_set_hw_params(priv)) {
+               err = -ENOENT;
                IWL_ERR(priv, "failed to set hw parameters\n");
                goto out_free_eeprom;
        }
@@ -3655,15 +3612,13 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
        /********************
         * 7. Setup services
         ********************/
-       pci_enable_msi(priv->pci_dev);
-
        iwl_alloc_isr_ict(priv);
 
        err = request_irq(priv->pci_dev->irq, iwl_isr_ict,
                          IRQF_SHARED, DRV_NAME, priv);
        if (err) {
                IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
-               goto out_disable_msi;
+               goto out_uninit_drv;
        }
 
        iwl_setup_deferred_work(priv);
@@ -3671,16 +3626,9 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
        iwl_testmode_init(priv);
 
        /*********************************************
-        * 8. Enable interrupts and read RFKILL state
+        * 8. Enable interrupts
         *********************************************/
 
-       /* enable rfkill interrupt: hw bug w/a */
-       pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
-       if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
-               pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
-               pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
-       }
-
        iwl_enable_rfkill_int(priv);
 
        /* If platform's RF_KILL switch is NOT set to KILL */
@@ -3707,20 +3655,12 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
        destroy_workqueue(priv->workqueue);
        priv->workqueue = NULL;
        free_irq(priv->pci_dev->irq, priv);
- out_disable_msi:
        iwl_free_isr_ict(priv);
-       pci_disable_msi(priv->pci_dev);
+ out_uninit_drv:
        iwl_uninit_drv(priv);
  out_free_eeprom:
        iwl_eeprom_free(priv);
- out_iounmap:
-       pci_iounmap(pdev, priv->hw_base);
- out_pci_release_regions:
-       priv->bus.ops->set_drv_data(&priv->bus, NULL);
-       pci_release_regions(pdev);
- out_pci_disable_device:
-       pci_disable_device(pdev);
- out_ieee80211_free_hw:
+ out_free_traffic_mem:
        iwl_free_traffic_mem(priv);
        ieee80211_free_hw(priv->hw);
  out:
@@ -3729,7 +3669,6 @@ int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
 
 void __devexit iwl_remove(struct iwl_priv * priv)
 {
-       struct pci_dev *pdev = priv->pci_dev;
        unsigned long flags;
 
        wait_for_completion(&priv->_agn.firmware_loading_complete);
@@ -3788,10 +3727,6 @@ void __devexit iwl_remove(struct iwl_priv * priv)
        iwl_free_traffic_mem(priv);
 
        free_irq(priv->pci_dev->irq, priv);
-       pci_disable_msi(priv->pci_dev);
-       pci_iounmap(pdev, priv->hw_base);
-       pci_release_regions(pdev);
-       pci_disable_device(pdev);
        priv->bus.ops->set_drv_data(&priv->bus, NULL);
 
        iwl_uninit_drv(priv);
index 49e6c68f9b756a5c1c6dc8cc5295448a6c19dbd9..700e9f92129c5d88f2299e0c12ffaff28dd3df80 100644 (file)
@@ -1195,10 +1195,16 @@ struct iwl_bus;
  * struct iwl_bus_ops - bus specific operations
  * @set_drv_data: set the priv pointer to the bus layer
  * @get_dev: returns the device struct
+ * @write8: write a byte to register at offset ofs
+ * @write32: write a dword to register at offset ofs
+ * @wread32: read a dword at register at offset ofs
  */
 struct iwl_bus_ops {
        void (*set_drv_data)(struct iwl_bus *bus, void *priv);
        struct device *(*get_dev)(const struct iwl_bus *bus);
+       void (*write8)(struct iwl_bus *bus, u32 ofs, u8 val);
+       void (*write32)(struct iwl_bus *bus, u32 ofs, u32 val);
+       u32 (*read32)(struct iwl_bus *bus, u32 ofs);
 };
 
 struct iwl_bus {
@@ -1282,9 +1288,6 @@ struct iwl_priv {
        /* basic pci-network driver stuff */
        struct pci_dev *pci_dev;
 
-       /* pci hardware address support */
-       void __iomem *hw_base;
-
        struct iwl_bus bus;     /* bus specific data */
 
        /* microcode/device supports multiple contexts */
index 869edc580ec6c461ae0f01da7b968a0de5af868e..c56eae74c3cdfdcb6f70a06e489bf8f768d00580 100644 (file)
 static inline void iwl_write8(struct iwl_priv *priv, u32 ofs, u8 val)
 {
        trace_iwlwifi_dev_iowrite8(priv, ofs, val);
-       iowrite8(val, priv->hw_base + ofs);
+       priv->bus.ops->write8(&priv->bus, ofs, val);
 }
 
 static inline void iwl_write32(struct iwl_priv *priv, u32 ofs, u32 val)
 {
        trace_iwlwifi_dev_iowrite32(priv, ofs, val);
-       iowrite32(val, priv->hw_base + ofs);
+       priv->bus.ops->write32(&priv->bus, ofs, val);
 }
 
 static inline u32 iwl_read32(struct iwl_priv *priv, u32 ofs)
 {
-       u32 val = ioread32(priv->hw_base + ofs);
+       u32 val = priv->bus.ops->read32(&priv->bus, ofs);
        trace_iwlwifi_dev_ioread32(priv, ofs, val);
        return val;
 }
index 00458fc2c402e1caa6e64b6754cb2c64f94ae8cb..43de98efa3e4113bb87f8900b6506fc5b31c726e 100644 (file)
@@ -91,9 +91,28 @@ static struct device *iwl_pci_get_dev(const struct iwl_bus *bus)
        return &(IWL_BUS_GET_PCI_DEV(bus)->dev);
 }
 
+static void iwl_pci_write8(struct iwl_bus *bus, u32 ofs, u8 val)
+{
+       iowrite8(val, IWL_BUS_GET_PCI_BUS(bus)->hw_base + ofs);
+}
+
+static void iwl_pci_write32(struct iwl_bus *bus, u32 ofs, u32 val)
+{
+       iowrite32(val, IWL_BUS_GET_PCI_BUS(bus)->hw_base + ofs);
+}
+
+static u32 iwl_pci_read32(struct iwl_bus *bus, u32 ofs)
+{
+       u32 val = ioread32(IWL_BUS_GET_PCI_BUS(bus)->hw_base + ofs);
+       return val;
+}
+
 static struct iwl_bus_ops pci_ops = {
        .set_drv_data = iwl_pci_set_drv_data,
        .get_dev = iwl_pci_get_dev,
+       .write8 = iwl_pci_write8,
+       .write32 = iwl_pci_write32,
+       .read32 = iwl_pci_read32,
 };
 
 #define IWL_PCI_DEVICE(dev, subdev, cfg) \
@@ -296,6 +315,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
        struct iwl_pci_bus *bus;
+       u8 rev_id;
+       u16 pci_cmd;
        int err;
 
        bus = kzalloc(sizeof(*bus), GFP_KERNEL);
@@ -307,16 +328,103 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
        bus->pci_dev = pdev;
 
+       /* W/A - seems to solve weird behavior. We need to remove this if we
+        * don't want to stay in L1 all the time. This wastes a lot of power */
+       pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+                               PCIE_LINK_STATE_CLKPM);
+
+       if (pci_enable_device(pdev)) {
+               err = -ENODEV;
+               goto out_no_pci;
+       }
+
+       pci_set_master(pdev);
+
+       err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+       if (!err)
+               err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
+       if (err) {
+               err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+               if (!err)
+                       err = pci_set_consistent_dma_mask(pdev,
+                                                       DMA_BIT_MASK(32));
+               /* both attempts failed: */
+               if (err) {
+                       pr_err("No suitable DMA available.\n");
+                       goto out_pci_disable_device;
+               }
+       }
+
+       err = pci_request_regions(pdev, DRV_NAME);
+       if (err) {
+               pr_err("pci_request_regions failed");
+               goto out_pci_disable_device;
+       }
+
+       bus->hw_base = pci_iomap(pdev, 0, 0);
+       if (!bus->hw_base) {
+               pr_err("pci_iomap failed");
+               err = -ENODEV;
+               goto out_pci_release_regions;
+       }
+
+       pr_info("pci_resource_len = 0x%08llx\n",
+               (unsigned long long) pci_resource_len(pdev, 0));
+       pr_info("pci_resource_base = %p\n", bus->hw_base);
+
+       pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+       pr_info("HW Revision ID = 0x%X\n", rev_id);
+
+       /* We disable the RETRY_TIMEOUT register (0x41) to keep
+        * PCI Tx retries from interfering with C3 CPU state */
+       pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
+
+       err = pci_enable_msi(pdev);
+       if (err) {
+               pr_err("pci_enable_msi failed");
+               goto out_iounmap;
+       }
+
+       /* TODO: Move this away, not needed if not MSI */
+       /* enable rfkill interrupt: hw bug w/a */
+       pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
+       if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+               pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+               pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
+       }
+
        err = iwl_probe((void *) bus, &pci_ops, cfg);
        if (err)
-               goto out_no_pci;
+               goto out_disable_msi;
        return 0;
 
+out_disable_msi:
+       pci_disable_msi(pdev);
+out_iounmap:
+       pci_iounmap(pdev, bus->hw_base);
+out_pci_release_regions:
+       pci_set_drvdata(pdev, NULL);
+       pci_release_regions(pdev);
+out_pci_disable_device:
+       pci_disable_device(pdev);
 out_no_pci:
        kfree(bus);
        return err;
 }
 
+static void iwl_pci_down(void *bus)
+{
+       struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus;
+
+       pci_disable_msi(pci_bus->pci_dev);
+       pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base);
+       pci_release_regions(pci_bus->pci_dev);
+       pci_disable_device(pci_bus->pci_dev);
+       pci_set_drvdata(pci_bus->pci_dev, NULL);
+
+       kfree(pci_bus);
+}
+
 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 {
        struct iwl_priv *priv = pci_get_drvdata(pdev);
@@ -326,7 +434,8 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
                return;
 
        iwl_remove(priv);
-       kfree(IWL_BUS_GET_PCI_BUS(&priv->bus));
+
+       iwl_pci_down(IWL_BUS_GET_PCI_BUS(&priv->bus));
 }
 
 #ifdef CONFIG_PM