]> git.openfabrics.org - ~emulex/infiniband.git/commit
powerpc/t2080rdb: Add T2080RDB board support
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Tue, 8 Jul 2014 06:52:33 +0000 (14:52 +0800)
committerScott Wood <scottwood@freescale.com>
Thu, 31 Jul 2014 05:11:10 +0000 (00:11 -0500)
commit78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d
tree35a06b239e99904a3379f15445d847dbcfd13b23
parentdd2b04fca871d4e606d49f3aeabe12584ac1a7ad
powerpc/t2080rdb: Add T2080RDB board support

T2080PCIe-RDB is a Freescale Reference Design Board that hosts T2080 SoC.
The board feature overview:
Processor:
 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
DDR Memory:
 - Single memory controller capable of supporting DDR3 and DDR3-LP devices
 - 72bit 4GB DDR3-LP SODIMM in slot
Ethernet interfaces:
 - Two 1Gbps RGMII ports on-board
 - Two 10Gbps SFP+ ports on-board
 - Two 10Gbps Base-T ports on-board
Accelerator:
 - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
IFC/Local Bus
 - NOR:  128MB 16-bit NOR flash
 - NAND: 1GB 8-bit NAND flash
 - CPLD: for system controlling with programable header on-board
eSPI:
 - 64MB N25Q512 SPI flash
USB:
 - Two USB2.0 ports with internal PHY (both Type-A)
PCIe:
 - One PCIe x4 goldfinger(support SR-IOV)
 - One PCIe x4 slot
 - One PCIe x2 end-point device (C293 crypto co-processor)
SATA:
 - Two SATA 2.0 ports on-board
SDHC:
 - support a MicroSD/TF card on-board
I2C:
 - Four I2C controllers.
UART:
 - Dual 4-pins UART serial ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
arch/powerpc/boot/dts/t2080rdb.dts [new file with mode: 0644]
arch/powerpc/boot/dts/t208xrdb.dtsi [new file with mode: 0644]
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/85xx/corenet_generic.c